i am getting stuck booting to recovery. currently on stock 4.4.2 software 1.58.501.1, kernel 3.4.0 I used the toolkit, hoping it was simple.
http://forum.xda-developers.com/showthread.php?t=2727899
I unlocked my phone, shows unlocked with s-on , hboot-3.16.0.000
It says it installed the recovery, but i try to go to recovery and i just get stuck on the recovery screen. once i am successful getting to recovery, will i be able to upgrade to
http://forum.xda-developers.com/att-htc-one-m8/development/rom-sd-4-0-sense7-port-sdkernel-t3062367
Looks like you installed recovery to the boot partition. There's a thread on how to fix it here: http://forum.xda-developers.com/showthread.php?t=2713134
Related
ok. so i just htc unlocked and need to install a recovery, but when i try to install it in fastboot it says it installed, but when i boot to it, the phone goes black and reboots to system. Please help
fixed it
Hi, I have a TF201, rooted, bootloader unlocked, android 4.1.1.
I recently flashed the recovery image using fastboot and an image of CWM recovery touch (for the TP), it reported as successful. Now when i try to boot into recovery the system hangs at "Booting Recovery kernel image". I tried a earlier version and the same happened.
I was going to try to flash TWRP but there are 2 versions available one for ICS bootloader or one for JB bootloader. I am guessing i am on JB but have no sure way of how to tell and i don't want to risk bricking my system.
My bootloader version is: 1.00e ww_epad-10.4.2.18-20121122 a03
Has anyone had any success flashing a recovery image?
Any help/suggestions would be much appreciated.
Cheers
Solved Thanks to http://forum.xda-developers.com/showthread.php?t=2372050
So I screwed up and cleared my wiped my phone then when I went to flash CM 11 from Pacman I got a failure so I couldn't flash the ROM and it cleared out my Pacman as well so I didn't have any ROMs on my phone and no ROM installed so it would just boot to recovery (i use TWRP). When i tried to put a ROM on to my phone through my computer I got an error and when I tried to use the ADB Sideloader but it just got stuck saying"waiting for device." So I went ahead and re-locked my boot loader and tried to restore the phone with the stock RUU but it just fails every time and I have let it run for an entire day before. So at this point I have an AT&T HTC One that boots to a boot loader then says tampered, re-locked and security warning on the top i can use fast boot (but not sure what to do with it) no ROM to boot to, and cant get to TWRP (unless I unlock boot loader again). Any recommendations would be very helpful.
crabbymonkey said:
So I screwed up and cleared my wiped my phone then when I went to flash CM 11 from Pacman I got a failure so I couldn't flash the ROM and it cleared out my Pacman as well so I didn't have any ROMs on my phone and no ROM installed so it would just boot to recovery (i use TWRP). When i tried to put a ROM on to my phone through my computer I got an error and when I tried to use the ADB Sideloader but it just got stuck saying"waiting for device." So I went ahead and re-locked my boot loader and tried to restore the phone with the stock RUU but it just fails every time and I have let it run for an entire day before. So at this point I have an AT&T HTC One that boots to a boot loader then says tampered, re-locked and security warning on the top i can use fast boot (but not sure what to do with it) no ROM to boot to, and cant get to TWRP (unless I unlock boot loader again). Any recommendations would be very helpful.
Click to expand...
Click to collapse
Unlock it again, run the ruu exe.
Only reason to go through the relock **** is to warranty it.
Sent from my One using Tapatalk
crabbymonkey said:
So I screwed up and cleared my wiped my phone then when I went to flash CM 11 from Pacman I got a failure so I couldn't flash the ROM and it cleared out my Pacman as well so I didn't have any ROMs on my phone and no ROM installed so it would just boot to recovery (i use TWRP). When i tried to put a ROM on to my phone through my computer I got an error and when I tried to use the ADB Sideloader but it just got stuck saying"waiting for device." So I went ahead and re-locked my boot loader and tried to restore the phone with the stock RUU but it just fails every time and I have let it run for an entire day before. So at this point I have an AT&T HTC One that boots to a boot loader then says tampered, re-locked and security warning on the top i can use fast boot (but not sure what to do with it) no ROM to boot to, and cant get to TWRP (unless I unlock boot loader again). Any recommendations would be very helpful.
Click to expand...
Click to collapse
what ruu are you trying that fails? when does it fail ?
go here and get the correct way to reset you phone to stock
http://www.htc1guru.com/downloads/stock-rom-downloads/ Guru Reset
Thats the same one and I downloaded the RUU for the forth time and it worked I guess I got unlucky. all is good now thanks for the help.
Hello,
I have M7Tmob, it had installed cyanogenmod 10.2.1. I downloaded and tried to install custom ROM United_Advance_v6.2.2. I booted into my custom recovery clockworkmod 6.... and it failed to flash the rom. I so decided to flash a new custom recovery image from my Linux Mint 16 machine.
I typed the command:
fastboot flash recovery "recovery...." Whatever recovery I was trying to flash... And it would just stay on waiting for device. After a little research I found out that I had to be logged in as "root" in order for the commands to work. And so I did, and apparently the flash was successful. Unfortunately, it was not. Now the phone will not boot into any rom and all I can get to is the boot manager. When I choose to boot into recovery all I get is the splash screen of whatever recovery image I put there and after two seconds, the recovery crashes and the phone reboot itself into the "HTC quietly brilliant" splash screen. And there vicious circle begins again. I reboot the phone into fastboot, and tried flashing some other recovery, but in the end I always ended up there, with a bricked phone.
I would appreciate if any of you could provided me with the much needed assistance!
Regards,
GSALTAR
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!