Hello,actually i had tried to root my samsung galaxy grand prime by the help of this xda site
http://forum.xda-developers.com/newthread.php?do=postthread&f=1236&nocache=1
BUT!! after completing step 11,my mobile doesn't show the normal screen,instead it shows
THIS
""" Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G530H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: OFFICIAL
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWERV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Downloading...
Do not turn off target!!"""​so i don't know what to do now
SO I MESSED UP PRETTY BAD ACTUALLY!!!:crying::crying:
pls help!!
also i'm an amateur in "mobile rooting" and in mobile things so please tell me step by step what to do!!
Any help will be appreciated!!:good::good:
just use samsung kies3 to get it fix.
go to tools
install software
tipe your model number CAPITAL LETTERS
enter your serial number to authorize download
conect your phone in dowload mode by pressing
volumen down,home button, power button.
let kies3 take care of things.
after some 30 minutes you be ok and good to go
Related
Hi there guys,
I recently bought an Samsung Galaxy S5 SM-900F that came already rooted with Cyanogen CM12.1 (cm-12.1-20150806-NIGHTLY-klte), using CWM Recovery Philz_touch.
When i was trying to make the updates through OTA, i was never able to update the firmware it was always displaying the old one on the informations of the phone. So i updated the firmware throught CWM Recovery Philz Touch manually, everything was ok, after that i thought to change the Recovery method to the TWRP latest version, it seemed ok that i suceeded.
However when i try to enter recovery mode i can't i'm always stuck with the ODIN mode saying Custom Rom and Knox 0x1 and does not let me to enter into recovery staying always in "Download Mode" .
Could Not Boot
Odin Mode
Product Name: SM-G900F
Current Binary: Custom
System Status: Custom
Know Warranty Void: 0x1 (2)
qualcomm secure boot: enable (csb)
AP SWREV: S1, T1, R1, A1 and P1
UDC START
Down there is information of the firmware and kernel installed on the device at the moment.
Galaxy S5
SM-G900F
Android 5.1.1
G900FXXU1ANJ1
Verson CyanogenMod = 12.1-20150806-NIGHTLY-klte
kerner version = 3.4.0-cyanogenmod-g0e5afc9 [email protected] #1 Thu Aug 6 00:38:38 PDT 2015
build number = cm_klte-userdebug 5.1.1 LMY48G b33df4b0c1 test-keys
LinuxSE State = Forcing
I also done throught ODIN the installation on CF-Auto-Root-klte-kltexx-smg900f to be able to enter to recovery but when i enter it appears in red when entered on the recovery:
Adroid System Recovery <3e>
KOT49H.G900FXXU1ANCE ->
But the information of my version base band on the Phone Information is:
G900FXXU1ANJ1
If i try to install any of the recovery modes TWRP or CWM through ODIN i will the get always stuck in DOWNLOAD MODE and i neet to install again through ODIN CF-Auto-Root-klte-kltexx-smg900f so i can enter to recovery :
Could Not Boot
Odin Mode
Product Name: SM-G900F
Current Binary: Custom
System Status: Custom
Know Warranty Void: 0x1 (2)
qualcomm secure boot: enable (csb)
AP SWREV: S1, T1, R1, A1 and P1
UDC START
Can you please advise me what can i do to overcome this and install a custom recovery to update firmware in the future?
Best Regards,
Hi,
Disaster!
My phone, when I try and turn it on is stuck in a loop where the Samsung log appears, dissappears then appears again. Reading another thread on here I managed to get it into ODIN mode, but I don't know what to do from here. I hope its not a lost cause
When i Odin mode it says:
ODIN MODE
Product name: SM-A8000
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
CROM SERVICE:LOCK
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
Does anyone know what I can do to bring it back to life?
Many thanks for your help
Raj (very stressed)
Hi there,
Im new to the whole rooting and unrooting thing. About 2 weeks ago i successfully rooted my Samsung Galaxy S6. Yesterday afternoon I rebooted my phone after "unrooting" it with SuperSU. After the reboot it got stuck in a boot loop and I dont know what to do. I tried to reflash a stock firmware with Odin but everytime it fails. I tried to hard reset the phone using TWRP recovery and no go. Here is some info:
Phone: SM-G920F
Has TWRP recovery.
On odin screen (phone) it says this after the Odin flash fails.
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: CUSTOM
CURRENT STATUS: CUSTOM
REACTIVATION LOCK: OFF
SECURE DOWNLOAD : ENABLED
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:5 K:2 S:2
SW REV. CHECK FAIL. DEVICE: 5, BINARY: 1
If you need any additional information just tell me and I'll provide it. Any help is appreciated.
Thanks,
Steven
when i want to connect to my laptop with samsung 6.3 with odin its not connecting. in downloading its showing
odin mode
product name: GT-I9200
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID :0x0
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER RPSWREV: 2
WRITE PROTECTION : ENABLE
SO WHAT WAS THE SOLUTION
For some stupid reason I put the OEM lock on before flashing and so now my Samsung is always stuck in the Download Mode screen. I've tried to hold volume down + side key for several times to restart and it still stuck
So here is what is shown on the screen right now:
"Red exclamation mark"
partition vbmeta
Reason CUSTOM vbmeta/VBMETA A115FXXU2BUH4, 42285435R /
CURRENT BINARY: Custom
OEM LOCK: ON (U)
KG STATUS: CHECKING
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, O2
RP SWREV: K 2, S 2
SECURE DOWNLOAD: ENABLE
DID : 00003639c19c
download mode !!
Could anyone come up with a way to help me unbrick my phone? Thanks in advance.