Wellp, I tried to install Cyanogenmod and it bricked the crap out of my phone. I followed their guide at http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and got to the "The Samsung Vibrant now has ClockworkMod Recovery installed. Continue to the next section." step and upon my phone's startup (with the added Clockworkmod flash screen) was greeted with nothing but a black screen. All I see is the samsung "S," glowing for ten or so seconds, like the Windows logo, then it goes black. I tried One Click Unbrick (http://forum.xda-developers.com/showthread.php?t=1153310), which restarts my phone, and brings me back to the same screen. Next, I tried doing the three button (sound-up, sound-down, and power) boot into the Android System Recovery program. There, I deleted the cache data, all user data, and attempted to reinstall packages, but I got a "failed to verify whole-file signature" error, as well as a "signature verification failed" error. I also, tried to re-flash via ODIN, but the only way to get it to see the phone is to boot it to the S logo screen (and the darkness beyond). There is the no-man's-land that Odin detects. Unfortunately, Odin gets stuck at the connecting step, and goes no further (unless that takes more than a few minutes). Fun stuff.
I'm sure you get people asking for help all the time, so I am very sorry to be yet another person asking, but this is quite the frustrating brick.
I am able to boot into download mode, as well as the android recovery menu (the aforementioned area with clear cache, user data, etc.) so I have found a bit of solace in those facts.
Thank you so much for your time.
rushmix said:
Wellp, I tried to install Cyanogenmod and it bricked the crap out of my phone. I followed their guide at http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and got to the "The Samsung Vibrant now has ClockworkMod Recovery installed. Continue to the next section." step and upon my phone's startup (with the added Clockworkmod flash screen) was greeted with nothing but a black screen. All I see is the samsung "S," glowing for ten or so seconds, like the Windows logo, then it goes black. I tried One Click Unbrick (http://forum.xda-developers.com/showthread.php?t=1153310), which restarts my phone, and brings me back to the same screen. Next, I tried doing the three button (sound-up, sound-down, and power) boot into the Android System Recovery program. There, I deleted the cache data, all user data, and attempted to reinstall packages, but I got a "failed to verify whole-file signature" error, as well as a "signature verification failed" error. I also, tried to re-flash via ODIN, but the only way to get it to see the phone is to boot it to the S logo screen (and the darkness beyond). There is the no-man's-land that Odin detects. Unfortunately, Odin gets stuck at the connecting step, and goes no further (unless that takes more than a few minutes). Fun stuff.
I'm sure you get people asking for help all the time, so I am very sorry to be yet another person asking, but this is quite the frustrating brick.
I am able to boot into download mode, as well as the android recovery menu (the aforementioned area with clear cache, user data, etc.) so I have found a bit of solace in those facts.
Thank you so much for your time.
Click to expand...
Click to collapse
which rom did u come from?
Froyo. I followed the guide to a 't' and got this black screen. I have no idea what I did wrong.
Well, I need to run off to work now, but I'd really appreciate any responses.
It seems like my phone isn't being detected by odin or windows when it is in download mode, though windows does recognize that a Samsung USB device is being connected. This is recognized in the windows tray (under the name "Samsung_Android"), and in Heimdall's Zadig driver tool ("Samsung_Android").
Hmm first tthings first, your reinstall package error seems pretty simple, yu dont have the right update.zip and recovery combination... if u wanna solve that problem, find the recovery 3e to 2e tool (google it) and run it (follow directions).. then you can run reinstall packages (might havr tto do it twice). If that doesnt cut it, find the CWM update.zip and put iit into the root of your internal sd card (the 12gb one), then run reinstall packages again. You may have to reinstall packages more than once.
Your odin problem might be caused by a lack of drivers on your comp... go on the android dev section and look for a thread talking aboout ms64 and 86 drivers samsung something...
If you can get into download mode, you can unbrick your phone so dont panic
Now odin is a very dangerous tool imo so if you really are sorry about askint, do us a favir and read the sticky oon how to odin before you use it so you dont have to come back and ask us about how to Really unbrick your phone
Also, your brick is referred to as a soft brick and the android recovery program is referred to as recovery mode.
And if you really **** up, we now have the unbrickable mod in the vibrant android dev section which will unbrick your phone no matter wat (it takes somr hardware modifying though)
Sent from a cell tower to the XDA server to you.
And if i were you, id redownload the cm7 package again to make sure that it wasnt a bad download and id read some general vibrant info before diving into cm7... if youre running stock recov and have never odined before etc, youre prob not the best candidate for flashing.. just my opinion
Sent from a cell tower to the XDA server to you.
Thank you very much for your reply. I couldn't find a related tool with the Google search string "3e to 2e recovery tool vibrant," but I did find a modified 3e tool at dkszone(*)net/bypass-e-signature-verification-fail-issue-on-samsung-vibrant-android-2.2 . However, this gets stuck at "checking for temporary root."
As for installing drivers, I have installed the Samsung galaxy 64 bit drivers several times now, but I'll give the 32 bit drivers a whirl as well.
I am unable to access the SD card, and don't have a mini SD card reader, so that compounds the problem (damn my lack of cash!).
*Edit* Upon my attempted installation of the 32 bit drivers I get the following (word for word) "Swallowtail has being used. You need to eject device and reboot your computer. Rerun (Japanese or Chinese characters) after reboot your computer." Google returns zero results when I search for this error. I tried rebooting my computer and running it again, but got the same error (even with the phone unplugged from the computer).
*Double Edit* I've been trying to use the AIO Vibrant Toolbox to restore my phone to factory defaults, but I've been having no luck, as it claims my phone is not in USB debugging mode (and obviously I can't change this, as I have no access to the Android OS).
Try this, mate and hopefully you will be up and running soon...
http://forum.xda-developers.com/showthread.php?t=1278683
When I run this the program handshakes, downloads the pit file, then restarts and "...Local and device PIT files don't match and repartition wasn't specified!
Ending session...
Rebooting device...
Device not connected.."
It reboots to the black screen of death and stays there. Perhaps I could select "Flash Bootloader," but the warning of possible permanent damage scares me.
According to the thread...
"REPARTITIONING ISSUE WITH HEIMDALL 1.3.0
Heimdall currently has an issue with repartitioning. 99% of the time you will not need to repartition. Failure to follow these directions can possibly lead to bricking:
Do not flash bootloaders if you see this message:
Code:
Local and device PIT files don't match and repartition wasn't specified!
This message means your partition tables do not match the firmware."
So I guess one of the roots of my problem is that my partition tables do not match the firmware. I have no idea what to do about that.
In this case try another computer if you can, install the right drivers and see odin recognizes your phone. I'm sure it will, for some people sometimes it takes fair few tries for no reason.
Another suggestion, take out sim card and external sd while connecting in download mode. Sometimes that helps.
---------- Post added 29th September 2011 at 12:01 AM ---------- Previous post was 28th September 2011 at 11:43 PM ----------
Here is a recent thread where someone had issue with odin connection.
http://forum.xda-developers.com/showthread.php?t=1225197#16797271
Well, I ran Heim one click on another computer and had the same boot-to-blackscreen process happen.
I was, however, successful at getting Odin to recognize the phone with AIO vibrant toolbox. Odin kept getting stuck at "set pit file" though.
Baby steps...
This is so frustrating. I feel like I'm so close.
How do I get the right PIT file on my phone if ODIN is getting stuck at that step?
Now, after installing the drivers provided with Heimdall-one-click's Zadig, ODIN doesn't recognize the phone.
One step forward, two steps back.
*Edit* Nevermind, got ODIN to recognize it again by uninstalling/reinstalling all related drivers.
Then odin to stock with tthe stock jfd files.. follow the manual, report results
Sent from a cell tower to the XDA server to you.
http://forum.xda-developers.com/showthread.php?t=734475
Use those files and the procedure for ODIN.
As for what caused your problem. You flashed a clockwork recovery for a different phone, possibly the Vibrant (non-MTD) mode? Usually installing Clockwork on the Vibrant only works from ROM Manager app when its running stock JFD. At least for me anyway. Any other ROM it ****s it somehow and I end up in a situation like yours. Not to worry though. Here's a quick install guide after you ODIN the phone to stock.
Put latest nightly of CM7 on the phone memory (not external microSD)
Install clockwork (Easiest way to do this is put the update.zip file I've attached onto the root of your phone memory, not the external microsd card, then reboot into recovery (hold both volume buttons and turn it on) and select Reinstall packages twice. It will then boot you into Clockwork).
Wipe data and cache in clockwork
Install zip from SD card--> pick the latest CM7 nightly.
DONE.
I'd like to use those files, but every single link is broken...
*Edit* Never mind. Found another source. I'll post upon success/failure.
*Edit again* Actually, it doesn't seem like the new link on mediafire has all the files required by the process (OP: http://forum.xda-developers.com/showthread.php?t=734475), and I can't post in that thread (because I'm a new user).
This is the post that uploaded the files: http://forum.xda-developers.com/showpost.php?p=17512889&postcount=615
So I haven't changed a damn thing yet, and all that happens when I try to put the phone in download mode is | Phone----Warning (!) Sign----Computer | screen comes up.
Even when I only plug it into a power outlet...
Flashing the IPhone was easier and more stable than this, years ago. I honestly expected better from Google.
*Edit*
OH MY GOD. Odin is going somewhere! Go, AIO Vibrant Toolbox, Go!
*Edit again*
And it stopped at about 90% with "<ID:0/003> dbdata.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
"
Well, I tried again and everything finished uploading, and got the green "pass!" for the first time in Odin.
Now my poor little 959v is stuck in a booting loop. The Samsung Vibrant screen comes up, disappears, comes up again, disappears, ad infinitum.
rushmix said:
Well, I tried again and everything finished uploading, and got the green "pass!" for the first time in Odin.
Now my poor little 959v is stuck in a booting loop. The Samsung Vibrant screen comes up, disappears, comes up again, disappears, ad infinitum.
Click to expand...
Click to collapse
959v is the not the vibrant, tis the galaxy s4g, if you odined vibrant files on your 4g then that's why you are in a bootloop
Dear god do I feel stupid. I googled it a while ago just to be sure, and it seemed to say that the V stood for "Vibrant." I guess that would be why I've been having this sneaking suspicion...
Well it's good news for you, mate. Head over to galaxy s 4g
forums and hopefully you will be able to get your phone back.
Hello Guys, sorry if this is not in the correct part of the forum. This is for a GALAXY ACE BTW,
Lets Begin!,
I have installed CM7 Couples of days ago and all when perfectly fine, but now I want to get back to a stock ROM of my phone as I preferred the the other ROM.
What have I tried and not worked so far:
Odin OneClick Downloader - ( i have done the remove battery and sim and sd also )
(USB Debugging is also on)
I have ran it as admin
Ran Odin First
Then Plug in
and Boot to Download Mode
and Also tried ADB Reboot Download
I have tried this on 3 of my computers and I keep on getting stuck on File Analysis on all of the 3 Computers.
I have tried the Odin Multiloader also but still no luck Flashing back to the STOCK ROM.
Anyone has any suggestion, I have also tried flashing a new on it and it gets installed but does Boot Loop at Reboot. But when I flash CM7 everything is fine. I also have another GALAXY ACE (well not mine another member of the family) if that is any help of like make a back up and that and sending it to my phone!?#
I can also send screenshot if needed.
bootloop???
http://forum.xda-developers.com/showpost.php?p=20969794&postcount=2
and also use some specific version of odin for flashing phone..
you can find links in newbie guide or on sammobile
you've been "thanks" btw
Absolute start, did the same process using Coderom, i think i might do an nandroid of my sisters phone now and get back to the stock.
Thanks again
Hi guys
I think i bricked my galaxy s3 (i9300)
my S3 was on android 4.1.2 official, but since the upgrade i noticed the charging problems many people had, with up to 6-7 hours to charnge fully with the original charger or more (the solution many sad was either to buy a direct charger, non usb, as for the S2 or turn back to its ICS 4.0.4..well at that moment i opted for getting back to ICS
But it seems with the new boot loader that Sammy introduced in the new software something went wrong when flashing the ICS firmware with the 3 Files (pda,modem.csc)..
It FAILED, i retried, then i got several times stuck and Nand Write Start or Setup Connection
Then i tried maybe flashing the firmware with a PIT file to repartition..the result was the same..
So in conclusion i think i made up a big mess in there...
At this moment my phone can only get in Download Mode with the 3 buttons combo (it also shows the counter etc), nothing more, it doesn't work at all..I' can't flash on it anything (except for the single PIT file) it's the only file that gets Successful installation in Odin, everything else gets stuck
(recovery, firmware..)
EDIT: after flashing the mx PIT file i have again the initian boot logo..but still get FAILED in flashing firmware process
HELP is MUCH appreciated! Thank you in advance!
I also have this problem, but mine happened when upgrading my rom (Foxhound). Can't enter recovery, only download mode works. Flashing back to stock has failed, I now want to try flashing the pit files.
timberlake88 said:
Hi guys
I think i bricked my galaxy s3 (i9300)
my S3 was on android 4.1.2 official, but since the upgrade i noticed the charging problems many people had, with up to 6-7 hours to charnge fully with the original charger or more (the solution many sad was either to buy a direct charger, non usb, as for the S2 or turn back to its ICS 4.0.4..well at that moment i opted for getting back to ICS
But it seems with the new boot loader that Sammy introduced in the new software something went wrong when flashing the ICS firmware with the 3 Files (pda,modem.csc)..
It FAILED, i retried, then i got several times stuck and Nand Write Start or Setup Connection
Then i tried maybe flashing the firmware with a PIT file to repartition..the result was the same..
So in conclusion i think i made up a big mess in there...
At this moment my phone can only get in Download Mode with the 3 buttons combo (it also shows the counter etc), nothing more, it doesn't work at all..I' can't flash on it anything (except for the single PIT file) it's the only file that gets Successful installation in Odin, everything else gets stuck
(recovery, firmware..)
EDIT: after flashing the mx PIT file i have again the initian boot logo..but still get FAILED in flashing firmware process
HELP is MUCH appreciated! Thank you in advance!
Click to expand...
Click to collapse
Hi everyone,
First of all, thanks for all the help/development done here, it is really awesome. I am new to rooting/rom so, I've spent a lot of time reading forum threads and looking at people's issues and it's been really helpful.
Yesterday, I spent all day trying to update my Bell Mobility Samsung Galaxy S Vibrant GT-I9000M from Froyo 2.2 to 4.2+
I sucessfully rooted the device, installed SpeedMod kernel(with Odin 3.04) and got CWM Recovery working when I restart the cellphone.
Afterward, I tried to update with different ROM(CyanFox, CM11, Mackay OmniROM...) but always got Status 7 error at CWM. So I figured I'd try to upate to a recent Kernel and installed GearKernel_JBPlus_Vibrant_1.0.3v.tar trought Odin. The phone got in an installation loop. Here is a poor webcam photo of the error(sry couldn't get better) : http://i.imgur.com/L3b0RmF.png. It says something like Estimating(?) volume for path [grep], Can't mount grep, Installation Aborted. Restart, splash screen, installation aborted, loop.
I had this loop at other occasions trying to update Kernel. The solution had been to put the cellphone in Download mode and reinstall Speedmod Kernel with Odin. This is what I did again.
It allowed me to get in Recovery mode but I couldn't go passed it. Attempt at restoring backup didn't worked. So I decided I'd go back to everything stock and followed this thread http://forum.xda-developers.com/showthread.php?t=1047087 and used Odin with the PIT and TAR files.
This got me in my worst position so far. If the cellphone is plugged, it loops between dark screen and the little "loading thingy" before the battery, but nothing more, no battery charge. If I try to open it without the plug, it display the GALAXY S GT-I9000 splash screen(which is weird cause I'm using I9000m) for a couple second then goes dark.. Then splash screen.. then dark... pretty quickly.
I can go in Download mode but I haven't succeeded to get in Recovery mode. I have adb on my computer but I haven't been able to call anything from it at the point I am.
I have found different threads showing different solution for various problems but I feel like I tried enough and I'd like to avoid bricking my cellphone so I decided I'd make my own post detailing the steps I took.
What should be my next step to get out of this loop? It seems like I only have Odin/Download mode to help me.
Thanks again.
If you have the gt-i9000m that is not the vibrant. The vibrant is the sgh-t959. Thats probably your problem
Sent from my Nexus 4 using xda app-developers app
Hey Guys,
I tried to root my Samsung S4 GT-I9502 (OS Android 4.3), for that I found this website:
http://marrkdaviid.com/2013/08/fix-caller-id-install-google-play-on-the-galaxy-s4-i9502/
But it failed (more information below) and I had the following error message and no wifi.
I am able to put the device into download mode, though I keep getting this error message when I try flashing the device in Odin.
(here someone with a similar problem: http://androidforums.com/international-galaxy-s4-all-things-root/768632-sos-cannot-open-gt-i9502-after-failed-boot.html)
"Complete(Write) operation failed."
When attempting to flash the device, it quickly goes through boot.img, recovery.img and system.img (when it should take longer for each step, and you should see the little green progress bar move), before failing. Does this mean that Odin is having issues writing to the device?
I live in China and I just bought the phone, I needed 5 days to download the necessary files, because most download pages are blocked in China. So I am loosing my last nerve right now.
I am pretty confident that I have the correct Samsung drivers installed. I don’t have Samsung Kies installed. I have even tried using a different computer (Laptops), and two different ROMs.
I have tried flashing the below ROMs:
I9502ZNUCMG2_I9502CHUCMG2_I9502ZNUCMG2_HOME.tar.md5
I9502ZNUEMK3_I9502CHUEMK3_I9502ZNUEMK3_SVA.tar.md5
Someone with a the same problem tried the 'Firmware upgrade and initialization' option in Samsung Kies, but it didn’t work, so I didn’t try. (Here the link: http://forum.xda-developers.com/showthread.php?t=2382979)
Instead I tried a recovery. I used Odin 3.07 and the following file:
i9502-cwm-recovery.tar.md5
I got my phone back to work for a while, I reset the phone, just in case. But know I can’t switch the Wifi on and the phone wants to Reboot.
So I allowed the phone to Reboot, I clicked on “reboot system now” and then on “Yes – (I forgot what was written behind the Yes, but I didn’t just click on the normal Yes, I clicked on the Yes - …)
The problem here: The Phone changed to a China Unicom Screen and stayed like that. After 5 h I took the battery out, but I couldn’t restart the phone.
So I did an cwm recovery and know I am afraid to reboot. The Wifi is not working and I can’t find any information about how to fix it.
So please help me. Do I reboot? Can I already install SVA ROM, although I couldn’t flash the Stock Firmware? Do I send the phone back and give up?
Please let me know if you need any other information to be able to help me.
PS: This is the first time that I flash a smart phone. And although I already spent several days now, searching the internet for how-to-dos, tips & tricks, guidelines, Q&As and god knows what, I still do not fully understand what exactly I am doing here. Hence, I would be very happy to receive somewhat easy understandable answers.
Thank you so much for your help!
Anna