Related
Update
Full Wipe/Repartition/Emergency Recovery: http://forum.xda-developers.com/showthread.php?t=2507253
No-Wipe System Restore: http://forum.xda-developers.com/showthread.php?t=2507217
Hey guys,
It might be a little early right now but as soon as any one of you are able to get the VRUEMJ7 (Android 4.3) update from either Samsung Kies or the Verizon Installer please post here. We need someone to pull the file for us so we can mod it and make it rootable.
Marking @beanstown106, @designgears, and @invisiblek in this.
What if we got ota?
Sent from my SCH-I545 using Tapatalk
Kchitown1977 said:
What if we got ota?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
That file is already here: http://forum.xda-developers.com/showthread.php?t=2502591
Not as useful at the moment if we want to root it the same way we did VRUDMI1, thanks for offering however.
OK sorry couldn't help
Sent from my SCH-I545 using Tapatalk
open1your1eyes0 said:
That file is already here: http://forum.xda-developers.com/showthread.php?t=2502591
Not as useful at the moment if we want to root it the same way we did VRUDMI1, thanks for offering however.
Click to expand...
Click to collapse
It hasnt been released yet. You dont usually respond when I quote you in anything related to achieving root but would it be just as productive to try to pull the partitions from a device thats already taken the ota and retained root? Or possibly getting the partitions you need from an emmc dump via qpst. We already got the modem and NON-HLOS.bin signed (thus odin flashable). What specific partitions are you in need of?
Sent from my XT912 using xda app-developers app
Surge1223 said:
It hasnt been released yet. You dont usually respond when I quote you in anything related to achieving root but would it be just as productive to try to pull the partitions from a device thats already taken the ota and retained root? Or possibly getting the partitions you need from an emmc dump via qpst. We already got the modem and NON-HLOS.bin signed (thus odin flashable). What specific partitions are you in need of?
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
We need the full original system.img.ext4 (as would be included in the normal ODIN TAR for this build) and must be identical to the one included in the factory TAR or ODIN will refuse to flash it.
I have the update on my phone right now. How would I go abouts getting the file from Kies or the Verizon program? I have both.
I updated OTA to 4.3.
icomputerz said:
I have the update on my phone right now. How would I go abouts getting the file from Kies or the Verizon program? I have both.
I updated OTA to 4.3.
Click to expand...
Click to collapse
Unfortunately you can't already be updated or it's too late. Kies and the VZW Installer get it as part of the update process for them but they have to detect that the phone is currently on an MI1 build to get it.
open1your1eyes0 said:
Unfortunately you can't already be updated or it's too late. Kies and the VZW Installer get it as part of the update process for them but they have to detect that the phone is currently on an MI1 build to get it.
Click to expand...
Click to collapse
There is an emergency recovery feature in Kies. Now if I can get it to kick into that mode, but not reset my phone, wouldn't it make the file begin to download?
Usually the updates are released via the vzw updater first..... Wonder if they did it this way on purpose trying to get as many as possible to get locked down?
Sent from my SCH-I545 using XDA Premium 4 mobile app
icomputerz said:
There is an emergency recovery feature in Kies. Now if I can get it to kick into that mode, but not reset my phone, wouldn't it make the file begin to download?
Click to expand...
Click to collapse
It is possible but my guess it would probably download VRUDMI1 build instead since MJ7 is not available as of yet for most people.
Ryno77 said:
Usually the updates are released via the vzw updater first..... Wonder if they did it this way on purpose trying to get as many as possible to get locked down?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If they are monitoring these threads then they must surely know how we got root so quickly last time. It might be very likely this theory is true in fact. So far every update broke the previous root method and has required a new root method every time.
open1your1eyes0 said:
Snip.
Click to expand...
Click to collapse
Yep, kies does not have it yet. I'll keep my eye on it though.
I havent seen any indications of it by other means either. But if getting a stock.img.ext4 is our end goal then there are a few other means by which we can create a correctly sparsed and properly sized system.img.ext4 that will flash with odin
Sent from my XT912 using xda app-developers app
Surge1223 said:
I havent seen any indications of it by other means either. But if getting a stock.img.ext4 is our end goal then there are a few other means by which we can create a correctly sparsed and properly sized system.img.ext4 that will flash with odin
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
I've been able to dd my already-rooted MJ7 system partition, copy it back to my pc, mount it, modify it, img2simg it, and reflash it with heimdall AND have the changes stick. You do have to do a chcon on the file to make it executable by non-root but I'm trying to modify the context in the mounted image.
would it matter if the current ME7 is rooted? i'll check my Kies when i get home in an hour or so
gtj0 said:
I've been able to dd my already-rooted MJ7 system partition, copy it back to my pc, mount it, modify it, img2simg it, and reflash it with heimdall AND have the changes stick. You do have to do a chcon on the file to make it executable by non-root but I'm trying to modify the context in the mounted image.
Click to expand...
Click to collapse
Wait you have root and your on mj7? Are you planning on uploading some of those partitions ?
Sent from my XT912 using xda app-developers app
Android 4.3 requires Kies 3, so let's see if this will download the firmware.
EDIT: It says "Your device's current firmware version is not supported to update firmware via Kies"
Surge1223 said:
Wait you have root and your on mj7? Are you planning on uploading some of those partitions ?
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
Yeah. I'm still in shock and I don't quite understand it. I need to see if I can reproduce it.
Icomputerz are you running stock ML1? If not Keis will tell you to pack sand.
Sent from my SCH-I545 using XDA Premium 4 mobile app
cvondra said:
Icomputerz are you running stock ML1? If not Keis will tell you to pack sand.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep, fresh OTA.
Have a sch-i545 from verizon.it updated to mk2 . Went to safe strap root it and after if rebooted twice all the phone will do is go to download mode or stay on screen that says firmware has detected issues with software please go to Kies and update firmware. I did many times from different computers and every time it would download and stop and freeze computers. Anyone have any help.
james581 said:
Have a sch-i545 from verizon.it updated to mk2 . Went to safe strap root it and after if rebooted twice all the phone will do is go to download mode or stay on screen that says firmware has detected issues with software please go to Kies and update firmware. I did many times from different computers and every time it would download and stop and freeze computers. Anyone have any help.
Click to expand...
Click to collapse
Safestrap doesn't root, so there's things that you've done that you're not telling us. How did you root your phone? What else did you do after you rooted?
The "firmware detected issues" usually means that you tried to flash recovery, custom kernel, etc. Did you try to flash custom recovery?
james581 said:
Have a sch-i545 from verizon.it updated to mk2 . Went to safe strap root it and after if rebooted twice all the phone will do is go to download mode or stay on screen that says firmware has detected issues with software please go to Kies and update firmware. I did many times from different computers and every time it would download and stop and freeze computers. Anyone have any help.
Click to expand...
Click to collapse
How did u root your phone?
safestrap enabled, Hyperdrive driven
I used get root link. Not safe strap my fault guys. I used Odin 3.7 and the o lyrics thing I did was put the tar.md5. Hit start and it had 1 fail but the phone did reboot twice and now says firmware needs updated.
Sent from my SCH-I545 using xda app-developers app
james581 said:
I used get root link. Not safe strap my fault guys. I used Odin 3.7 and the o lyrics thing I did was put the tar.md5. Hit start and it had 1 fail but the phone did reboot twice and now says firmware needs updated.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Why were you in odin? What were you flashing?
james581 said:
I used get root link. Not safe strap my fault guys. I used Odin 3.7 and the o lyrics thing I did was put the tar.md5. Hit start and it had 1 fail but the phone did reboot twice and now says firmware needs updated.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I don't really know what's going on here as you're a little confusing but figured I'd chime in here..
If you were on mk2 then you should just rooted the phone using SafeRoot, very easy and reliable and Safe!
Then you should have installed SafeStrap by simply downloading the. Apk file from that thread. Boooom you'd be all set and ready to flash.
None of that requires Odin. Unless I missed the post where you said you were trying to Odin back for a fresh start??!!
Sent from my SCH-I545 using XDA Premium 4 mobile app
Mistertac said:
I don't really know what's going on here as you're a little confusing but figured I'd chime in here..
If you were on mk2 then you should just rooted the phone using SafeRoot, very easy and reliable and Safe!
Then you should have installed SafeStrap by simply downloading the. Apk file from that thread. Boooom you'd be all set and ready to flash.
None of that requires Odin. Unless I missed the post where you said you were trying to Odin back for a fresh start??!!
Click to expand...
Click to collapse
I used Odin because the get root string wasn't working it rooted phone then after a reboot it rebooted itself twice and went to screen saying firmware issue detected. but I b no longer have that phone I have a replacement one that followed safe root and everything working good to the best of my knowledge. . I am a noob and have a lot to learn. thanks for all the feedback.
Sent from my SCH-I545 using XDA Premium 4 mobile app[/QUOTE]
james581 said:
I used Odin because the get root string wasn't working it rooted phone then after a reboot it rebooted itself twice and went to screen saying firmware issue detected. but I b no longer have that phone I have a replacement one that followed safe root and everything working good to the best of my knowledge. . I am a noob and have a lot to learn. thanks for all the feedback.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
[/QUOTE]
a sticky thread is set up and is a WIP for S4 people in the general section to assist those who wish to mod their phones
http://forum.xda-developers.com/showthread.php?p=49335074
Have a verizon s4 that was originally on mdk. I rooted, and have been using hyperdrive for some time. After many sudden random reboots, I decided to change to another rom, Gdux. When I lost wifi, it was recommended to flash a new kernel to restore this functionality. As soon as I did this, I got some screen that said return your phone to verizon, something about unauthorized software.
Searched and searched the net and found that I could odin back to stock again. I followed all instructions,but now phone won't boot past verizon splash screen, and it gets hot. REALLY hot while sitting there on verizon splash screen. I can't get to recovery, only download mode after I pull battery. Going to "lose" phone for warranty replacement if I can't get it to work. Please help!!!
Flash an MDK stock odin tar in download. You'll be good as new and be able to do what you want again
aidankiller4 said:
Flash an MDK stock odin tar in download. You'll be good as new and be able to do what you want again
Click to expand...
Click to collapse
Ive tried for 2 days to find one in tar format. Only found one and it won't download on my computer. Know where to find file?
Try this http://www.androidfilehost.com/?fid=22979706399752783
Tried that and get stuck on Verizon screen
Sent from my SM-G730V using xda app-developers app
aidankiller4 said:
Try this http://www.androidfilehost.com/?fid=22979706399752783
Click to expand...
Click to collapse
The phone boots to verizon splash screen and sits there, gets almost too hot to hold, and still nothing. I pulled battery after 30 minutes. Should I try to flash this and then another kernel tar?
Yeah
Make sure you're checking the .tar files MD5 for accuracy. Make sure it's compatible with your radio/baseband version as well.
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
Make sure you're checking the .tar files MD5 for accuracy. Make sure it's compatible with your radio/baseband version as well.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know that I originally started with MDK, there's no way to check anything now because it won't boot. I rooted the day I got the phone and haven't taken an OTA.
Still doesn't work, any other files I can try?
bjlandt said:
I know that I originally started with MDK, there's no way to check anything now because it won't boot. I rooted the day I got the phone and haven't taken an OTA.
Still doesn't work, any other files I can try?
Click to expand...
Click to collapse
If you haven't taken any OTA's or flashed any radios, then you don't need to worry about that part.
Flashing the .tar file SHOULD have the kernel included... or at least I'm thinking it would. It should.
But after It flashes in Odin, let it sit for a good 20 minutes after it says success. Just so you can be assured that it had the time to flash successfully.
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
If you haven't taken any OTA's or flashed any radios, then you don't need to worry about that part.
Flashing the .tar file SHOULD have the kernel included... or at least I'm thinking it would. It should.
But after It flashes in Odin, let it sit for a good 20 minutes after it says success. Just so you can be assured that it had the time to flash successfully.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Is there a way to flash a twrp recovery through odin? I have several backups on my sd card, and I think there is one on there where I backed up everything when I first got it.
Yes.
Here's a link to some instructions and and a page that can send you to the TWRP Odin compatible file.
http://www.theandroidsoul.com/latest-twrp-recovery-for-verizon-galaxy-s4-android-4-4-compatible/
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
Yes.
Here's a link to some instructions and and a page that can send you to the TWRP Odin compatible file.
http://www.theandroidsoul.com/latest-twrp-recovery-for-verizon-galaxy-s4-android-4-4-compatible/
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Thank you!!! Found a file that worked!!! Thanks for all the help!
bjlandt said:
Thank you!!! Found a file that worked!!! Thanks for all the help!
Click to expand...
Click to collapse
Yes sir. Glad I could help.
You're welcome.
Sent from my D2LTE (D2VZW) using XDA app-developers app
Hey guys, I had my phone rooted on 4.3 mk2 and I ended up removing it. But right now when I boot the phone, I have the custom splash screen. So I want to know if it's okay for me to take the update or do I have to Odin back to stock? I know there is no root for kitkat yet and I know everyone is against it but I am not worried about all of that.
Sent from my SCH-I545 using XDA Free mobile app
damnyouwaffles said:
Hey guys, I had my phone rooted on 4.3 mk2 and I ended up removing it. But right now when I boot the phone, I have the custom splash screen. So I want to know if it's okay for me to take the update or do I have to Odin back to stock? I know there is no root for kitkat yet and I know everyone is against it but I am not worried about all of that.
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
Hi I had the same issue. mk2, removed root. If you want to take the kit kat OTA update just follow the steps below. Beware you will lose root if you already havent. Kies does give you the option to back up your info if you want.
You won't brick trying to take the update it will just fail with error 402. I wrote out my steps below to guide you thru the process I used and were successful for me.
1. Unroot using SuperSU.
2. Use Kies to update/restore firmware on your PC.
3. Once rebooted search for system update.
4. Download and install the update. I did the whole process using only data no WiFi (not sure if it makes a difference but that's what I did).
5. Once your phone reboots you will be greeted by a lovely red Verizon splash screen.
Hope this helps you and others!
Sent from my Hp Touchpad Android 4.4.2 using Tapatalk Pro
Sent from my SCH-I545 using Tapatalk
Domvillan said:
Hi I had the same issue. mk2, removed root. If you want to take the kit kat OTA update just follow the steps below. Beware you will lose root if you already havent. Kies does give you the option to back up your info if you want.
You won't brick trying to take the update it will just fail with error 402. I wrote out my steps below to guide you thru the process I used and were successful for me.
1. Unroot using SuperSU.
2. Use Kies to update/restore firmware on your PC.
3. Once rebooted search for system update.
4. Download and install the update. I did the whole process using only data no WiFi (not sure if it makes a difference but that's what I did).
5. Once your phone reboots you will be greeted by a lovely red Verizon splash screen.
Hope this helps you and others!
Sent from my Hp Touchpad Android 4.4.2 using Tapatalk Pro
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Do I take the update from kies onto my phone? Or will that brick the whole thing?
Sent from my SCH-I545 using XDA Free mobile app
damnyouwaffles said:
Do I take the update from kies onto my phone? Or will that brick the whole thing?
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
When I tried Kies it said my firmware was up to date. I just reinstalled that. Not sure if Kies now has the update for 4.4
Sent from my SCH-I545 using Tapatalk
So could I just take the update? I want to restore to stock on with Odin and then take it but I have virtually no access to a computer that can run Odin because mine is fried.
Sent from my SCH-I545 using XDA Free mobile app
I am unsure if I bricked my Sprint Note 3, but I tried to roo it with Chain Fire and odin, using Qbking77's YouTube video as a guide. But after the root was complete, 60% of my apps were gone, I can't using any google powered apps, and I can't go into the phones settings. Everything force closes. Honestly, I'm just trying to do a proper root so I can use Cyanogen Mod. Can someone help me revert to before I rooted,and explain the process to get cyanogen?
I followed the instructions provided, and downloaded
SM-N900P (Sprint): CF-Auto-Root-hltespr-hltespr-smn900p.zip
Followed the further stated instructions, open odin, and I cannot insert the MD5 file into odin. I was able to before, and now I cannot. Earlier I was able to do so, and as stated above, after I did it several apps disappeared, google play services no longer works,supersu is on the phone, and I cannot access the phones settings. The only thing I can do is use the stock browser. I am asking what to do/what I did wrong/how to fix it/or how to continue. If these questions cant be answered, how do I revert back to stock?
Thealbatross said:
I am unsure if I bricked my Sprint Note 3, but I tried to roo it with Chain Fire and odin, using Qbking77's YouTube video as a guide. But after the root was complete, 60% of my apps were gone, I can't using any google powered apps, and I can't go into the phones settings. Everything force closes. Honestly, I'm just trying to do a proper root so I can use Cyanogen Mod. Can someone help me revert to before I rooted,and explain the process to get cyanogen?
I followed the instructions provided, and downloaded
SM-N900P (Sprint): CF-Auto-Root-hltespr-hltespr-smn900p.zip
Followed the further stated instructions, open odin, and I cannot insert the MD5 file into odin. I was able to before, and now I cannot. Earlier I was able to do so, and as stated above, after I did it several apps disappeared, google play services no longer works,supersu is on the phone, and I cannot access the phones settings. The only thing I can do is use the stock browser. I am asking what to do/what I did wrong/how to fix it/or how to continue. If these questions cant be answered, how do I revert back to stock?
Click to expand...
Click to collapse
I would Odin back to nk4, then do the ota, and then instead of all the cf stuff I would just odin twrp and flash supersu. It's literally that simple.
Sent from my SM-N900P using XDA Free mobile app
How do I do these things?
Thealbatross said:
How do I do these things?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=60272319
Sent from my SM-N900P using XDA Free mobile app
jlechner said:
http://forum.xda-developers.com/showthread.php?p=60272319
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
The TWRP file in that post downloads as .img, and when I change it to .tar it becomes unusable and odin marks it as a fail. This has been the issue for me throughout this entire root process. People to me "Download this" and it either
1. Doesn't work
2. Gets to 100% extraction then fails
3. Odin wont let me insert the file.
I know its not me doing anything wrong. Right now, my phone boots to the sprint logo, and nothing past it. I can go into download mode and that's about it. I just need help and the proper instructions to either put it back to stock, or do a proper root. I rooted a Galaxy S2 years ago, and several other phones between now and then, and got it on the first try. This process with the Note 3 has been very frustrating, and I've been without my phone for 4 days. So if you, or anyone else knows the DETAILED steps I need to take, please help.
I did what you said with the NK4 thing, and like I said above, it would get to 100% extraction then fail. I got it from the sammobile site, and they wouldnt even let me redownload it. And I dont know what OTA is.
Thealbatross said:
The TWRP file in that post downloads as .img, and when I change it to .tar it becomes unusable and odin marks it as a fail. This has been the issue for me throughout this entire root process. People to me "Download this" and it either
1. Doesn't work
2. Gets to 100% extraction then fails
3. Odin wont let me insert the file.
I know its not me doing anything wrong. Right now, my phone boots to the sprint logo, and nothing past it. I can go into download mode and that's about it. I just need help and the proper instructions to either put it back to stock, or do a proper root. I rooted a Galaxy S2 years ago, and several other phones between now and then, and got it on the first try. This process with the Note 3 has been very frustrating, and I've been without my phone for 4 days. So if you, or anyone else knows the DETAILED steps I need to take, please help.
I did what you said with the NK4 thing, and like I said above, it would get to 100% extraction then fail. I got it from the sammobile site, and they wouldnt even let me redownload it. And I dont know what OTA is.
Click to expand...
Click to collapse
If you're not getting a boot then you need to restart.
1)Get the tar for nk4.
2)Odin the nk4 (but get to download mode by pulling the battery then boot to download mode).
3) After a successful odin of nk4, you should be official. If not, boot to recovery, wipe data, then odin again (battery pull)
4) If going to oc5, take the ota. Or go to next step.
5) after ota (or not) now we root. Provided you don't care about knox, the best way is to get the twrp img from their site. Flash that with odin (battery pull).
6) download a supersu.zip to flash from twrp, and flash it.
I can't link these files right now, but it's easy to find them. If you need links later, I can help in an hour or so.
And ota is over the air, when you get a notification for an update
Sent from my SM-N900P using XDA
Ok, thanks, Ill wait for the file links.
Thealbatross said:
Ok, thanks, Ill wait for the file links.
Click to expand...
Click to collapse
Nk4 tar: http://forum.xda-developers.com/showthread.php?p=47355107
Twrp link to sprint note 3, pay attention to the odin instructions: http://twrp.me/devices/samsunggalaxynote3sprint.html
SuperSU: https://docs.google.com/file/d/0B8umY4TqG8CVamo0amUtQ3hKNXc/edit?usp=docslist_api
There ya go.
Sent from my SM-N900P using XDA Free mobile app
I can very thankfully say that md5 file downloaded and is installing without a problem.
now, the TWRP site you gave me, I can use the most recent version, correct?
EDIT: Both NK4 and TWRP are installed but still cant get by sprint logo. Is this normal?
Thealbatross said:
I can very thankfully say that md5 file downloaded and is installing without a problem.
now, the TWRP site you gave me, I can use the most recent version, correct?
Click to expand...
Click to collapse
Yes.
Link post updated for supersu
Sent from my SM-N900P using XDA Free mobile app
jlechner said:
If you're not getting a boot then you need to restart.
1)Get the tar for nk4.
2)Odin the nk4 (but get to download mode by pulling the battery then boot to download mode).
3) After a successful odin of nk4, you should be official. If not, boot to recovery, wipe data, then odin again (battery pull)
4) If going to oc5, take the ota. Or go to next step.
5) after ota (or not) now we root. Provided you don't care about knox, the best way is to get the twrp img from their site. Flash that with odin (battery pull).
6) download a supersu.zip to flash from twrp, and flash it.
I can't link these files right now, but it's easy to find them. If you need links later, I can help in an hour or so.
And ota is over the air, when you get a notification for an update
Sent from my SM-N900P using XDA
Click to expand...
Click to collapse
So steps 2 and 3 worked, but I still get stuck at the sprint logo.
Actually, ignore everything stated above, Im back to stock with custom recovery. What's Next?
Thealbatross said:
So steps 2 and 3 worked, but I still get stuck at the sprint logo.
Click to expand...
Click to collapse
Boot to recovery, wipe data, and try booting. If that didn't do out, wipe data again then pull battery, boot to download mode, and odin nk4 again. Those files are the ones I have used so...yeah...lol.
Sent from my SM-N900P using XDA Free mobile app
jlechner said:
Boot to recovery, wipe data, and try booting. If that didn't do out, wipe data again then pull battery, boot to download mode, and odin nk4 again. Those files are the ones I have used so...yeah...lol.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Its good to go now, look above lol
Thealbatross said:
Actually, ignore everything stated above, Im back to stock with custom recovery. What's Next?
Click to expand...
Click to collapse
Well, if you have custom recovery and don't want ota, flash supersu.
If you want ota you gotta redo the nk4 steps and then take ota, but do not install twrp once you odin
Sent from my SM-N900P using XDA Free mobile app
Do I need it? Im not even sure what it and oc5 are.
Thealbatross said:
Do I need it? Im not even sure what it and oc5 are.
Click to expand...
Click to collapse
Oc5 is lollipop. Major upgrade to Android. However, many things, like xposed, aren't working yet. Your call man.
Sent from my SM-N900P using XDA Free mobile app
Well, ota sounds like it will be helpful. And the version of Cyanogen I want required lollipop. So walk through me through I guess. Everything has gone well so far haha
jlechner said:
Oc5 is lollipop. Major upgrade to Android. However, many things, like xposed, aren't working yet. Your call man.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Actually, ill just move on without them. I dont want to mess up my current progress.
Thealbatross said:
Actually, ill just move on without them. I dont want to mess up my current progress.
Click to expand...
Click to collapse
Ha! It's all in learning man. That and finding downloads. If you decide you want ota, just re-odin nk4 (after a factory reset, and use battery pull for download mode), take the ota, re-odin twrp, reboot to twrp and flash supersu.zip. Pretty easy.
Sent from my SM-N900P using XDA Free mobile app