Hi,
I'm trying to run a custom init.d script on my HTC One (m7) which is running on Cyanogemod 12.1 (The problem existed already in 12.0). The problem is that none of the scripts are executed at boot time.
Looking at the "init.cm.rc" script i found the following snippets that look like the "sysinit" command should be triggered at boot time.
Code:
[...]
on post-fs-data
[...]
# Run sysinit
start sysinit
[...]
# sysinit (/system/etc/init.d)
service sysinit /system/bin/sysinit
user root
oneshot
disabled
I even tried removing the "disabled" parameter but the "sysinit" command is still not executed at boot time.
If I run the "sysinit" command on a root shell the scripts are executed as the should.
Anybody an idea what I'm missing?
Thanks in advance!
Hi.
I am also running CM12.1 on a w7dsn device, and init.d wasn't working. I was able to get it running by using the init.sh script as described here:
http://techtrickz.com/how-to/fix-xposed-framework-installation-issue-on-nexus-6/
I've just downloaded the script and run it from my sdcard, no other steps are necessary.
lfom said:
Hi.
I am also running CM12.1 on a w7dsn device, and init.d wasn't working. I was able to get it running by using the init.sh script as described here:
http://techtrickz.com/how-to/fix-xposed-framework-installation-issue-on-nexus-6/
I've just downloaded the script and run it from my sdcard, no other steps are necessary.
Click to expand...
Click to collapse
I am trying to get init.d working on d2vzw, and no luck. The script you linked to works by replacing /system/etc/install-recovery.sh, but my build has no such file. What a drag with CM...
galets said:
I am trying to get init.d working on d2vzw, and no luck. The script you linked to works by replacing /system/etc/install-recovery.sh, but my build has no such file. What a drag with CM...
Click to expand...
Click to collapse
Mine didn't have either, but after installing the script (and creating install-recovery.sh) then my scripts in init.d started to be run after every boot.
You must turn off selinux in order for init.d to work
Sent from my LG-LS980 using XDA Free mobile app
I'm using CyanogenMod 12.1 ROM on my phone, to enable the init.d you have to remove the /system/bin/sysinit then recreate the similar filename with the same content and permissions (755, root, shell).
Code:
#!/system/bin/sh
export PATH=/sbin:/system/sbin:/system/bin:/system/xbin
run-parts /system/etc/init.d
Was it the init.rc from the boot.img initrd, or the one from the rootfs /boot.img?
Just change the permissions of all files in /etc/init.d folder to 755.
Also if you use the /data/local/userinit.sh change that to 755.
Leave the /system/bin/sysinit file as it is.
Code:
#!/system/bin/sh
export PATH=/sbin:/system/sbin:/system/bin:/system/xbin
for i in /system/etc/init.d/*; do
if [ -x $i ]; then
/system/bin/log -t sysinit Running $i
$i
fi
done
Cheers
Related
i have rooted perfectly,and built the folder /system/etc/init.d and i gave limits of authority to it.besides,i modify the file install-recovery.sh,the content is
【
#!/system/bin/sh
if ! applypatch -c MTD:recovery:2048:b01ab98799f9db633bbc6b43fe0df8fe5cebb820; then
r=`/data/sqlite3 /data/data/com.android.providers.settings/databases/settings.db "select * from system where name='stay_on_while_plugged_in';"`
if [ $r eq "" ]; then
/data/sqlite3 /data/data/com.android.providers.settings/databases/settings.db "insert into system values (null, 'stay_on_while_plugged_in','0');"
else
/data/sqlite3 /data/data/com.android.providers.settings/databases/settings.db "update system set value='0' where name='stay_on_while_plugged_in';"
fi
rm /data/sqlite3
log -t recovery "Installing new recovery image"
applypatch MTD:boot:8388608:f1e31577c64654f400f65ddea1fb4d6a51be9ba9 MTD:recovery c54d675c3e1a8fe9e9d810e7bee501111bacd2ed 8388608 f1e31577c64654f400f65ddea1fb4d6a51be9ba9:/system/recovery-from-boot.p
else
log -t recovery "Recovery image already installed"
fi
# chmod the init.d dir
busybox chmod -R 755 /system/etc/init.d
# run init.d
/system/bin/logwrapper /system/bin/busybox run-parts /system/etc/init.d
】.
but when i reboot the phone,the file Won't enforced.i wonder why?
after testing,when i copy the sh script from init.d to install-recovery,it works.but it confuses me more,why can't i transfer the script from init.d to execute??
mapleshadow said:
after testing,when i copy the sh script from init.d to install-recovery,it works.but it confuses me more,why can't i transfer the script from init.d to execute??
Click to expand...
Click to collapse
Its 5am and I haven't slept much, but have you checked the permissions and made sure they are rw-r-r I've noticed files with different configuration not having these have some issues while running.
Easiest way to look and change is RootExplorer
I ran into a similar issue with my phone. Make sure your init.d folder has execute permissions and the scripts inside the same. i got fed up and made the scripts inside init.d executable ... seems to work now
Hi, I just read some tips about using script for enhancing performance.
It says that the script must be places in system/etc/init.d
But in stock rom P500 (GB 2.3.3 v20G) I can't find folder init.d
The questions:
1. Is the stock rom already support init.d script execution?
2. If yes, will it works just by creating folder init.d and place script there?
3. If not, how to enable support init.d for Optimus One, stock ROM rooted?
I search this forum and find some guide about init.d support in other phone models, will it works on Optimus One too, or perhaps it needs particular way to do it?
1. No
2. If you have init.d support in rom.
3. Only way to do it is cook a custom rom through kitchen to add init.d support
terratrix said:
1. No
2. If you have init.d support in rom.
3. Only way to do it is cook a custom rom through kitchen to add init.d support
Click to expand...
Click to collapse
3. answer is some wrong:
you doesnt need to cook a custom rom, you only need the adb (android debug bridge) to "speak" with your phone:
0.) on your phone download busybox from market
1.) install android sdk on your computer
2.) install LG usb drivers on your computer
3.) open a console (on windows use the "cmd" command)
4.) remount "root" to read/write (type following commands in the cmd)
Code:
adb shell
mount -o remount,rw /dev/block/mmcblk1 /
exit
5.) retrive the init.rc file from your device: (type the command in the cmd)
Code:
adb pull /init.rc C:\users\XXXXX\Desktop\init.rc
6.) open the init.rc file and add the busybox command to execute scripts in the /system/etc/init.d folder
after the lines that does mkdirs etc but BEFORE zygote starts (this stars the whole android)...
Code:
service userinit /system/xbin/busybox run-parts /system/etc/init.d
oneshot
7.) close and save the file, push it back to your device, than reboot:
Code:
adb push XXXX\XXXX\init.rc /init.rc
now you can use the init.d folder as in CyanogenMod / other custom roms.
andy572 said:
3. answer is some wrong:
you doesnt need to cook a custom rom, you only need the adb (android debug bridge) to "speak" with your phone:
0.) on your phone download busybox from market
1.) install android sdk on your computer
2.) install LG usb drivers on your computer
3.) open a console (on windows use the "cmd" command)
4.) remount "root" to read/write (type following commands in the cmd)
Code:
adb shell
mount -o remount,rw /dev/block/mmcblk1 /
exit
5.) retrive the init.rc file from your device: (type the command in the cmd)
Code:
adb pull /init.rc C:\users\XXXXX\Desktop\init.rc
6.) open the init.rc file and add the busybox command to execute scripts in the /system/etc/init.d folder
after the lines that does mkdirs etc but BEFORE zygote starts (this stars the whole android)...
Code:
service userinit /system/xbin/busybox run-parts /system/etc/init.d
oneshot
7.) close and save the file, push it back to your device:
Code:
adb push XXXX\XXXX\init.rc /init.rc
now you can use the init.d folder as in CyanogenMod / other custom roms.
Click to expand...
Click to collapse
Ah thanks for correcting my answer ^^
Dear Andy,
Thanks 4 the procrdure, however i wanted to ask you whether there is any tool to check that the scripts in the init.d folder r getting executed?
andy572 said:
.....guide...
Click to expand...
Click to collapse
That works? I mean init.rc is in ramdisk in boot partition, and gets unpacked on boot, so any changes in / are lost on reboot - at least that is what was told to me.
Kanad said:
Dear Andy,
Thanks 4 the procrdure, however i wanted to ask you whether there is any tool to check that the scripts in the init.d folder r getting executed?
Click to expand...
Click to collapse
Option 1 - run logcat during boot (Trough ADB, type logcat in adb shell, a little simpler if using Droid Explorer)
Option 2 - Run a script that changes something that was previously different. Try installing the supercharger (with different from normal minfree values), rebooting and running the script again to make sure the minfree values are modified. If so, init.d is working and vice versa.
andy572 said:
6.) open the init.rc file and add the busybox command to execute scripts in the /system/etc/init.d folder
after the lines that does mkdirs etc but BEFORE zygote starts (this stars the whole android)...
Code:
service userinit /system/xbin/busybox run-parts /system/etc/init.d
oneshot
Click to expand...
Click to collapse
I go directly to this step, using root explorer on phone (not using PC+ADB)
But after reboot, init.rc i've already edited before has been restored again to original value, as said by Tasssadar.
Maybe I should do it using PC+ADB instead of direct edit on phone?
optimuswhite said:
I go directly to this step, using root explorer on phone (not using PC+ADB)
But after reboot, init.rc i've already edited before has been restored again to original value, as said by Tasssadar.
Maybe I should do it using PC+ADB instead of direct edit on phone?
Click to expand...
Click to collapse
you are trying to modify a running system, sure - you have to do such things
in the boot.img file and have to re-flash it. there is no way to modify a running
system, sorry for misunderstanding.
andy572 said:
you are trying to modify a running system, sure - you have to do such things
in the boot.img file and have to re-flash it. there is no way to modify a running
system, sorry for misunderstanding.
Click to expand...
Click to collapse
I see.
so, is someone can guide me how to deal with boot.img on stock rom?
optimuswhite said:
I see.
so, is someone can guide me how to deal with boot.img on stock rom?
Click to expand...
Click to collapse
go to your recovery, make a backup of your current system and connect the
phone via usb to your computer and copy the rom from the phone to your computer.
then, use the htc kitchen to modify the created rom / or the boot.img
It seems that all Xperia Kernels that stem back to the DoomLord kernel start the init.d execution twice. While you may think "better twice than never" the nearly parallel execution of scripts can create problems if they concurrently manipulate CPU related tables - or fail to do so due to security mechanisms built in. I was hunting the problem that cpu-clock manipulation from init.d did not work for the scripts generated by System Tuner - finally resulting in this finding.
I checked for sirkay 587c and 587d and for fly-kernel 0.8 as the latest of their breed, quite sure nobody has ever cared about this quirk.
The duplicate execution could be tracked back to the init.rc entries:
Code:
[COLOR=SeaGreen]#DooMLoRD: init.d scripts support
start sysinitsupport
class_start core
class_start main
#DooMLoRD: new init.d scripts support
service sysinitsupport /sbin/sysinitsupport.sh
class main
disabled
oneshot[/COLOR]
Which does:
Code:
#!/sbin/sh
# DooMLoRD: init.d support script (v1)
# [START] setting up
echo "[START] remounting system" > /data/local/tmp/sysinitsupportlog.txt
/sbin/busybox mount -o remount,rw /system >> /data/local/tmp/sysinitsupportlog.txt
# make init.d directory
echo "
[*] make init.d directory" >> /data/local/tmp/sysinitsupportlog.txt
/sbin/busybox mkdir -p /system/etc/init.d >> /data/local/tmp/sysinitsupportlog.txt
# correcting permissions of files in init.d directory
echo "
[*] correcting permissions of files in init.d directory" >> /data/local/tmp/sysinitsupportlog.txt
/sbin/busybox chmod 777 /system/etc/init.d/*
# [COLOR=DarkOrchid]make [/COLOR]init.d directory
echo "
[*] [COLOR=DarkOrchid]make [/COLOR]init.d directory" >> /data/local/tmp/sysinitsupportlog.txt
[COLOR=Red]/system/bin/logwrapper /sbin/busybox run-parts /system/etc/init.d[/COLOR]
# [DONE] all done exiting
echo "[DONE] all done exiting" >> /data/local/tmp/sysinitsupportlog.txt
And later also in init.rc:
Code:
[COLOR=SeaGreen]#DooMLoRD: run my mods
service mymods /sbin/execute_mods.sh
class main
oneshot[/COLOR]
Which then does:
Code:
#!/sbin/sh
# starting
echo "[ START ]" > /data/local/tmp/log_doom-mods.log
echo "" >> /data/local/tmp/log_doom-mods.log
[COLOR=Red]# execute tweaks
/system/bin/logwrapper /sbin/busybox run-parts /etc/init.d[/COLOR]
# execute FPS limit remove
/sbin/mount -t debugfs debugfs /sys/kernel/debug
/sbin/echo '0' > /sys/kernel/debug/msm_fb/0/vsync_enable
/sbin/umount /sys/kernel/debug
echo "FPS limit successfully removed " >> /data/local/tmp/log_doom-mods.log
# DONE
echo "" >> /data/local/tmp/log_doom-mods.log
echo "[ DONE ]" >> /data/local/tmp/log_doom-mods.log
You see that the execution of
Code:
[COLOR=Red]/system/bin/logwrapper /sbin/busybox run-parts /etc/init.d[/COLOR]
is actually done twice - from sysinitsupport.sh first and then again from execute_mods.sh
Also mind that the log-entry in the first is leading in the wrong direction (copy error from above). It should better read "execute init.d directory"
The related logs are found in \data\local\tmp.
You can check yourself with this little script in \etc\init.d:
Code:
#!/system/bin/sh
echo [] > /data/local/tmp/$PPID-exec-done
echo $PPID "init.d executed" >> /data/local/tmp/$PPID-exec-done
date >> /data/local/tmp/$PPID-exec-done
Mind the $PPID which is the parent PID of the executing command (the busybox "run-parts"). Per boot you should just get 1 file <PPID>-exec-done containing the timestamp if you get 2 then you know why...
I have attached the script wrapped in a zip file. Unpack it, copy to \etc\init.d (or if not sym-linked to \system\etc\init.d) and change attributes to "777". Reboot and look what you get in \data\local\tmp.
Once you know, remove the script again and delete the created files in \data\local\tmp.
Mind that the scripts referenced from init.rc are copied over again from the kernel part so any change of the scripts in the \system\sbin folder is useless. The kernel has to fix that, no way out here.
I've been looking into this issue as well with the help of dk_zero_cool (mounts2sd amongst other things) as no matter what I tried I could not get m2sd to run in anything other than Safe Mode because init.d was being run as a service and not being executed in full before the init continued. So far I have edited init.rc to remove the second instance you quote above, and edited the first instance to:
Code:
exec /sbin/sysinitsupport.sh
so it executes rather than running a service. I then edited sysinitsupport.sh to contain just this:
Code:
#!/system/bin/sh
export PATH=/sbin:/system/sbin:/system/bin:/system/xbin
/system/bin/logwrapper busybox run-parts /system/etc/init.d
and also removed the line in execute_mods.sh that relates to init.d, so now theoretically the only thing that should happen in relation to init.d is that the exec command runs sysinitsupport.sh which in turn runs the init.d scripts before anything else in init.rc happens. IN THEORY!!! Because even with all of that done (and I have searched through the whole ramdisk, plus looked at the git for the init binary used in the Lupus ICS kernel I am using to make sure I haven't missed anything) the m2sd init.d script is still running in Safe Mode because it is detecting /system/bin/servicemanager running at the point it tries to execute. So something somewhere is still starting before the execution of init.d. I even tried with the init binary from the latest CM9 build for the Ray to rule out something wrong in there too.
I have sent all my files to dk_zero_cool to see if he can shed any further light on what else may be wrong. I have checked four different Ray kernels and they all use the same DoomLord methods so I doubt whether there are any Ray kernels that are running init.d correctly. It would be great to find a fix for this. Hope more people chip in!
Thanks for opening the discussion
As I understood, you have made some changes in the kernel assembly (not the code) to circumvent the effects you have outlined. I admit that I have not fully understood YOUR concern - but for my double execution of the "run-parts" the deactivation of the relevant line in either of the 2 scripts should do it, or not?
Is your concern related to the situation that init.d cannot do "everything" at the time it is executing and so it cannot achieve what some scripts intend to?
I am far too little educated in the details of kernel execution privileges so cannot further comment on that
Yeah, pretty much - to avoid possible issues with the m2sd script moving stuff around while something else is trying to make use of it the first thing it does is check if servicemanager is running, and if it is it disables the ability to move things like /data and dalvik-cache to sd-ext. The changes that we made in the scripts SHOULD have changed the init.d implementation from it running as a service whilst the rest of the init process carried on, to being executed as a command allowing any init.d scripts to be executed prior to any other service being started - as I understand it this is how init.d was intended to be used (ie the user scripts in /etc/init.d are run fully before anything else). However as I said, even with these changes and everything else relating to init.d having been removed something is still starting servicemanager, and until the source of that can be isolated scripts like m2sd cannot run fully/safely.
I guess the strategy to check on servicemanager is not right here. This is a process that starts several services and should not depend on anything in the init.d. So if you say that the boot sequence would have init.d completed BEFORE any service is started via servicemanager - THEN this could be a flaw in the kernel.
However is that really true? Is there no option to check if certain "dangerous" (for your move purposes) services are active already instead of checking on the servicemanager? I had found a nice overview on the Linux boot process here and I think that somewhere as part of the various init.x excuted scripts the servicemanager simply MUST be started - init.d is just a part of init - and for sure not the first part of it.
Off Topic:
I wonder where I can get some more insight in the Xperia Kernels and how they are assembled - especially which trace of that is noticeable in the filesystem. I noticed that the ICS Kernel have roughly 340MB for the user space while the JB Kernel has 360MB. Device should have 512 MB RAM, then some MB go away for radio and possibly video buffer, but his should be the same for all (accross ICS/JB). So what kind of memory tweaking makes this 20MB difference? I have not found a good place to discuss this - where could I go to?
tobbbie said:
It seems that all Xperia Kernels that stem back to the DoomLord kernel start the init.d execution twice. While you may think "better twice than never" the nearly parallel execution of scripts can create problems if they concurrently manipulate CPU related tables - or fail to do so due to security mechanisms built in. I was hunting the problem that cpu-clock manipulation from init.d did not work for the scripts generated by System Tuner - finally resulting in this finding.
Click to expand...
Click to collapse
How about Radeon kernel? Is there an issue like you said?
Sent from my ST18i using Tapatalk 2
frogerra said:
How about Radeon kernel? Is there an issue like you said?
Sent from my ST18i using Tapatalk 2
Click to expand...
Click to collapse
Just try out (see the guide on 01test.zip) - nothing you can harm doing that.
kernel behaviour trick
I noticed some kernels (GB and ICS) do overwrite settings from /etc/init.d ....
So if you make an init.d script with specific cpu values, or VM settings...some kernel overwrite these with their compiled/preferred values "after" init.d scripts are executed. This way it looks as if your script is not completely accepted by the rom...but the truth is that the kernel applies its own preferred values afterwards.
Thats why my init.d script contains a wait of 60 seconds in the beginning of the scripts......how ? add:
sleep 60
So your script looks like this (example):
#!/system/bin/sh
# this init.d script is for when you apply doomlord kernel supplied with repack 2013
sleep 60
That will run your init.d goodies after one minute.
As you see I'm working on a revived repack4pda 2013 (GB) , which will be released soon in repack4pda thread.
Br.
Michel
I guess that these kernels may be doing the same what you are proposing - just sleep the shell process before action starts. So you need to lookup the call tree from the init process along the various init.*.rc scripts if this is the case. For duplicate execution of init.d content any timed scripts willl not help - the duplicate execution will just happen later as the same script will pause the same amount of time.
Not sure if the init process script execution is synchronous or not - so if you create scripts which sleep, the final signal for "boot completed" may just also delay and the whole boot process may take longer by that sleep time. As well would you just stack the delays after each other and so nothing is gained finally. Synchronous execution would make it impossible that a part of the init process could postpone beyond boot completed.
It may differ if you run the scripts via the "exec" command or let it execute via the servicemanager. I guess the latter may run them asynchronously - not sure here as well.
I have a xperia u, which has not external SD card slot..
Data partition is MUCH bigger than what I need (I'm using 500mb of 2gb) and I want to move obb files to data partition to free some space in SD partition..
Is that possible?
You might try to move the file to the data partition and then create a symlink where the file was originally.
From a shell with root access:
# ln -s /your/data/partition/filename.obb /original/place/filename.obb
I'm doing the same moving apk and dalvik-cache but I have the problem that after reboot files are still there but the app is disabled.
You can check it here: http://forum.xda-developers.com/showthread.php?t=2597924
I would suggest to try it on an app that it's not important for the system and I don't assume any responsability
P.S.
partition where you create symlink must be ext2/3/4
I think I understand how this works.. Lets say symlinks are some kind of 'windows direct access' for files that can be recognized by the system.. Am I right?
How can I figure out what format are my partitions?
I want to move /mnt/sdcard/Android/obb/com.package.name/file.obb to /data/data/com.package.name/file.obb
Assuming that partitions are in the correct format, I'll have to move files with a root file browser, then connect phone with debug on and type this:
-adb shell
-su
-ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
Is that ok?
Yest that's the use, I don't know about "windows direct access" because I'm linux user
To check how is your partition formatted there are different ways from console but I just tried this app and it works:
https://play.google.com/store/apps/details?id=com.cls.partition
If both partitions are ext2/3/4 remember also to set the same user, group and permissions, you can do that copying the file from shell.
The whole sequence should look like this:
Code:
$ adb shell
$ su
# cp -a /mnt/sdcard/Android/obb/com.package.name/file.obb /data/data/com.package.name/file.obb
# rm /mnt/sdcard/Android/obb/com.package.name/file.obb
# ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
cp - a to copy preserving permissions and rm to remove the file.
/data is ext4.. /mnt/sdcard is vfat D=
No symlink then
I never used it but you can still mount bind folders (not files) in fat, something similar to symlink:
Code:
$ adb shell
$ su
# mkdir /data/data/com.package.name/obb/
# cp -a /mnt/sdcard/Android/obb/com.package.name/* /data/data/com.package.name/[B]obb/[/B]
# rm -r /mnt/sdcard/Android/obb/com.package.name/*
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/com.package.name/
if it works you need to find a way to excute that on boot maybe with a init script.
And if there is not crucial data you could even bind all the obb folder together like:
Code:
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/
You can also check this thread:
http://forum.xda-developers.com/showthread.php?t=1410262
Double check everything because I never tried it
Is it possible to add init.d support to my current rom and execute a sh file from it to initialize bind on boot?
No idea sorry
You can try asking in your phone section: http://forum.xda-developers.com/xperia-u
I found how to add init.d support!
Not sure if it works for any device/rom/kernel, but it worked for my Xperia U with GingerBeanSS v3.5 (Sony GB based)..
If anyone is interested, go to this link: http://forum.xda-developers.com/showthread.php?p=32716432
Now I suppose I can create a "BindOBB.sh" with the script you mentioned before in any place of /system, and make a "bindobb" file in /system/etc/init.d/ to execute that script..
So theoretically binding folders should work on every boot!
I used windows my entire life.. I'm not completely sure about linux scripts..
Sorry about making so much questions!
I really appreciate your help!
No problem I'm glad if I can help.
Init script is usually named starting with two numbers like: 00script, 20script, 99script that should give the order scripts are excuted.
For the script itself you need to follow the sample you donwloaded so it will be something like this:
Code:
#!/system/bin/sh
#Comment
busybox mount -o bind /data/data/obb/ /mnt/sdcard/Android/obb/
This is to mount all obb folder or, if you want to mount only some, you can write them all in the script or keep a list of packages in another file and make the script read that.
Remember to make a backup and you might try first with only one package
Ok, I've understood everything (thanks google! ) and done it..
mount -o bind[...] isn't executed by init script.. Maybe a syntax error as it is my first time doing it..
The same command (without 'busybox' at first, of course) seems to work via ADB, because in SolidExplorer when I go to obb folder BEFORE running the script it is empy, but after running it all packages' folders and files appear!
Now problem is that when running a game that need obb data, it closes by itselfs (no FC nor 'missing data' warning)..
Same problem with a 3rd party TTS engine that needs obb data too..
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
NeriL said:
I want to move /mnt/sdcard/Android/obb/ to /data/data/
Click to expand...
Click to collapse
you can easy create a directory bind using luckypatcher with the folder with obb and the folder where you would like to put it
remember to reboot or rescan your sd else it wont work
i use it to play asphalt and fifa
MrCrayon said:
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
Click to expand...
Click to collapse
I deleted my custom init script and wrote following command at the last line of '00test' script:
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
Mount then worked fine
(By the way, my custom script was named '99bindobb', so it was supposedly executed after everything else)
Also checked permissions: /data/obb/ and com.package.name folders inside it were rwxrwxrwx, but files inside were rw-------!
Changed permission of files to rwxrwxrwx..
Now everything works flawlessly at each boot!
Thank you so much! =D =D
You saved about 500Mb of my 4Gb!
And also I learned a lot about linux scripts, busybox and file system permissions!
You are welcome
For the 99 script that only define the order between the user init scripts so it still depends when they are called during boot.
Enjoy the power of Linux
Sent from my ZP980 using Tapatalk
Hi MrCrayon..! I'm here again
I changed rom and did the same as before to use /data insted of /mnt/sdcard for apps files..
This is exactly what I did:
I copied the script I used to sd (my edited 00test), changed rom (switched from Sony based GB rom to Sony Stock ICS rom), added init.d support (/data/Test.log indicates that it works), copied script to /system/etc/init.d/, changed script permissions to 777, created folders /data/AndroidData/ and /data/obb/ with 777 permissions and moved files from sd folders to custom folders in /data..
Finally updated busybox just in case
Script doesn't work, but executing 'mount -o bind' commands from ADB does! How can I fix that?
This is my init script:
#!/system/bin/sh
#Init.d Test
if [ -e /data/Test.log ]; then
rm /data/Test.log
fi
echo Ryuinferno @ XDA 2013 > /data/Test.log
echo Init.d is working !!! >> /data/Test.log
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
busybox mount -o bind /data/AndroidData/ /mnt/sdcard/Android/data/
busybox set_perm_recursive(0, 0, 0777, 0777, /data/AndroidData, /data/obb)
Hi,
I've followed this how-to: http://forum.xda-developers.com/showthread.php?t=1933849 to enable init.d support on my phone (GT-S5570i, Android 2.3.6, stock rom)
I have installed BusyBox (standard install, not smart install), then, after installing and launch Uni-init, i get "SUCCESS ! You have init.d support !"
Well, so I went into init.d folder and I manually launch the script "00test" to see if I am able to run scripts on my phone: ok: inside /data folder i see the test.log file! Then I delete this test file to see if my phone is really able to execute this script from the init.d folder at the boot.
Well, after reboot I go in /data but I don't see any test.log file.
Why? Uni-init told me that I have init.d support, but this don't seems true. The permissions on init.d folder and scripts are ok (rwxr-xr-x). I've also tried to change the ownership to 0 (root) and to 1000 (system) to the test script, and I've also tried another init.d activator, this one: http://download.apks.org/?apkid=com.broodplank.initdtoggler&ver=1.3&server=apk-s#.VbluDvldLcc bot no luck again.
Then I've found this solution: http://forum.xda-developers.com/showthread.php?t=2725680 which, differently from the other solutions, has inserted the runinit script inside /bin. Well: so I rebooted again, but the init scripts aren't still able to run at boot.
If i start the runinit script from a shell window, ok: scripts from init.d folder are properly executed, but again, when I boot my phone, these scripts aren't executed. Maybe I should tell to some system files to execute runinit at the boot time? I miss something?
Many thanks.
In another discussion I've read the following statement:
- the boot process calls install-recovery.sh while executing init.rc
- the install-recovery.sh calls sysinit script
- the sysinit script runs /system/etc/init.d/* in order
Click to expand...
Click to collapse
But I've found that my init.rc exclude the install-recovery.sh script:
Code:
#service flash_recovery /system/etc/install-recovery.sh
# oneshot
So, I don't have any chance to implement the init.d solution?