My nephew recently got an HP Slate 7 16gb (4600), it runs on android 4.1, he updated something that appeared on a notification. I'm not sure what it was, but the tablet was brad new and didn't have any apps, so my best guess is that it was a system update.
The problem is that is now stuck at bootloop (Hp logo at startup).
What I've tried:
Turn it off and back on, nothing
Charge it completely (the charging animation does appears), nothing
Boot it on recovery and reboot, noting
Factory reset from recovery and wipes, nothin
What do you think I should do? I haven't found the stock image (that was my next step)
Anyone can help?
Related
Hello everyone,
I recently received an Innovatek Inno Pad 10 (chinese android tablet) as a gift and the problem is that the tablet does not boot up. When I got the tablet and turned it on, it showed me an android bootloader screen and then it brought me to the android logo boot screen where it would basically go into an infinite boot sequence. I have tried charging it fully and then turning it on, I have tried un-plugging the battery and plugging it back in. I even tried re-flashing the firmware on the device using a software supplied by the company (it was very hard to find and the company's support is not that great). The flashing process was completed successfully but the tablet would still go into an infinite boot loop (I even tried re-flashing it again with no luck). Here is the worst part, there was a u-boot-nand.bin file included with the program and I decided to try and flash the tablet using that file. Now the tablet's screen won't even turn on, but the power and charge buttons still light on. I think the bootloader got messed up. Does anybody have an idea how to get this tablet working? I have posted pictures of the tablet and its specs.
Thanks
John
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
dogood1 said:
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
Click to expand...
Click to collapse
Any clue.
My Rooted Nexus 7 was working perfectly. Now I am not sure If it is Soft Bricked or something else is wrong with it, It was charging one day and I took it off one micro usb charger and put it on another Nexus 7 charger. I went back and turned it on, Now it was stuck in bootloop, I have seen bootloops before, but not like this. It turns on and goes to the lock screen, then after a few second it freezes then restarts. I have been able to quickly log in boot into safe mode but it still freezes and restarts, I made it to the app menu once and then it sad , Unfortunately Launcher has stopped, I have cleared the cache and dalvik cache and nothing works, I have bootloader version 4.1.3 and CWM version 6.0.1.9, I have tried to format tablet and factory reset with cwm recovery but when I turn it back on I still see my stuff and I still reboots, I have tried to restore from a backup from a while ago with cwm but it fails. I tried to use nexus toolkit but I dont remember my version and I cant check, I gave it a guess but It can not find my device when plugged in, even in recovery mode, It said something about fastboot but i think i did that but I am not 100% sure what it is, I need to get this workig again fast.
Okay, here's the situation. I was playing Minecraft PE on a server. While I was playing, all of a sudden, my tab stopped working and froze. Then I reset (power button >5 seconds) the tab. After that, I was stuck on the splash screen (shows Samsung Galaxy Tab 10.1). But I did set the settings to not show the boot animation during boot (this was a long time ago). I left it there for 2 hours++ and nothing happened. I even left it to drain until it shut down itself. I did a full charge, not working. I took out the battery overnight, not working. Only CWM recovery works. I tried to backup, but then was stuck on SettingsProvider.apk. I cleared cache and dalvik, not working. I didn't factory reset though as I will lose the entire Rom itself. I tried to sideload the rom on my pc, but Windows shows USB not recognized etc. I also tried going into download mode, but then same thing, windows does not recognize it. In ODIN, nothing shows up. I suspect a faulty cable, so I'll buy a new one. However, that couldn't make it bootloop in the first place. So I need help for this.. It has been almost a week. My ROM is SlimBean p4 20121211. Thanks in advance.
Hi all in 2023:
After 3 years of not using my ZW2 (W501Q), I decided to bring it to my wife.
(Last time i used, it was running AW2]
At power on, it stuck on android logo loop...
I've got into recovery, I did factory reset and wipe cache partition...
I dont know if still on ADB debueg enabled, after factory reset... I didnt try fastboot, no idea how to proceed..
nothing change.. still on loop.. (I've waited for 20 min)... still there, looping...
Help needed, with my wife in the middle, its a matter of life or dead...
any clue?