anyone have any luck getting it to work?
Yes. Refer to this thread
http://forum.xda-developers.com/showthread.php?t=3074586
[EXPERIMENTAL] [UNOFFICIAL] Xposed for arm64 devices | 5.1 and 5.0 versions available
thicklizard said:
Yes. Refer to this thread
http://forum.xda-developers.com/showthread.php?t=3074586
[EXPERIMENTAL] [UNOFFICIAL] Xposed for arm64 devices | 5.1 and 5.0 versions available
Click to expand...
Click to collapse
I tried both zip files and both failed to install
Part of the reason I haven't taken mine out of the box yet.
jpwhre said:
I tried both zip files and both failed to install
Click to expand...
Click to collapse
Well what errors does it give you? Do you have a recovery log? I've been using it for almost a week now and it's working flawlessly
thicklizard said:
Well what errors does it give you? Do you have a recovery log? I've been using it for almost a week now and it's working flawlessly
Click to expand...
Click to collapse
any lagging for you?
trev23sks said:
any lagging for you?
Click to expand...
Click to collapse
So far none at all. I am only using a few modules though
Deleted, took up way to much space here for a log file
Are you using captain throwbacks beta twrp? You need to mount system is seems. If your using captains twrp just go to mount in twrp and select system
thicklizard said:
Are you using captain throwbacks beta twrp? You need to mount system is seems. If your using captains twrp just go to mount in twrp and select system
Click to expand...
Click to collapse
Did this http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
Ended up with this http://forum.xda-developers.com/showpost.php?p=60059404&postcount=30
Going into mount, there is no option for system
jpwhre said:
Did this http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
Ended up with this http://forum.xda-developers.com/showpost.php?p=60059404&postcount=30
Going into mount, there is no option for system
Click to expand...
Click to collapse
Then if you didn't use the beta version you need to issue the command to mount
http://forum.xda-developers.com/showthread.php?p=59759441
thicklizard said:
So far none at all. I am only using a few modules though
Click to expand...
Click to collapse
Dope! what Rom are you using? You still on stock ota? or you flashed viper?
trev23sks said:
Dope! what Rom are you using? You still on stock ota? or you flashed viper?
Click to expand...
Click to collapse
Stock
thicklizard said:
Then if you didn't use the beta version you need to issue the command to mount
http://forum.xda-developers.com/showthread.php?p=59759441
Click to expand...
Click to collapse
yeah so i thought i done the beta version, guess i didn't clearly read the thread and ended up flashing official and things went wrong from there.
Wouldn't let me do a backup, still showed divice as untuched, but wouldn't let me backup. After the official clean backup was released here, i downloaded it.
Tired of waiting, i went ahead and flashed beta superSU "before seeing the command block" and now i issue the command, and it takes, but it wont mount as system, and now device shows that it has been tampered.
I already know what is going to happen.
fastboot oem lock
RUU
start all over with everything wiped :victory:
or flash captn beta twrp and hope it fixes it.
Tomorrow I'll stop procrastinating......
Hey guys, Kyle here. I'm unlocked/running latest beta TWRP/rooted/S-OFF on stock and I can't seem to get this working. The apk and zip install fine but it bootloops after the install. Anything I can provide or any insight I can get?
For anyone having issues with xposed bootlooping after S-off flash the zip linked below. What happened with S-off is it triggered hrdump to create a 3gb backup of the devices ram into data. the zip will remove the dump and the bin file causing this.
Flash the zip linked below
Boot back into system
then go back into recovery and flash xposed for arm64 sdk21 and you should be good
The only issue we've noticed is with stock odexed roms. you can try and post what happens but we've only seen it work on all other deodexed roms.
Xposed fix for S-off users.
steal25 said:
For anyone having issues with xposed bootlooping after S-off flash the zip linked below. What happened with S-off is it triggered hrdump to create a 3gb backup of the devices ram into data. the zip will remove the dump and the bin file causing this.
Flash the zip linked below
Boot back into system
then go back into recovery and flash xposed for arm64 sdk21 and you should be good
The only issue we've noticed is with stock odexed roms. you can try and post what happens but we've only seen it work on all other deodexed roms.
Xposed fix for S-off users.
Click to expand...
Click to collapse
After flashing this system.ui force closes... among other things...
Sent from my SM-T217S using Tapatalk
steal25 said:
For anyone having issues with xposed bootlooping after S-off flash the zip linked below. What happened with S-off is it triggered hrdump to create a 3gb backup of the devices ram into data. the zip will remove the dump and the bin file causing this.
Flash the zip linked below
Boot back into system
then go back into recovery and flash xposed for arm64 sdk21 and you should be good
The only issue we've noticed is with stock odexed roms. you can try and post what happens but we've only seen it work on all other deodexed roms.
Xposed fix for S-off users.
Click to expand...
Click to collapse
Went through the steps and ended up having to download the apk 2.71 and got the result in the pic. I feel is so close but I'm missing something
motoelliot said:
After flashing this system.ui force closes... among other things...
Sent from my SM-T217S using Tapatalk
Click to expand...
Click to collapse
I'll bet your using a theme? The new Apktool is causing issues where it's not reinjecting the classes.dex it's fine after you flash the theme because dalvik is built. But this zip wipes dalvik so being that there's no classes it won't rebuild. Hence the fcs. This is just a guess.
knightwolf123 said:
Went through the steps and ended up having to download the apk 2.71 and got the result in the pic. I feel is so close but I'm missing something
Click to expand...
Click to collapse
Download the latest alpha apk and you should be good.
Related
hello i have recently rooted my htc evo 4g lte and flashed twrp 1.4.4.0 and then tryed to install a rom several roms actually so it goes thru and ses successful but when i reboot i get a black screen and nothing else i can turn it off and flash another rom same thing blank screen can somene pls help my phone is useless at this point (no OS) its essentially a paper weight . is their a way i can just make it to where its out of the box i dont really care about anything else. PLS HELP :crying:
Are you S-off? If not, you need to fastboot flash the kernel after flash ROM. Check the stickies.
Edit: or use flash image GUI to flash the kernel/boot.IMG.
Sent from my EVO using xda premium
While you read up on how to do that just restore the backup you made in twrp of your stock rom.
Sent from my PC36100 using xda app-developers app
Some roms will not work if you are S-On
This one will
Viper4G 3.1.4
http://forum.xda-developers.com/showthread.php?t=2124391
You may need the tool that is very easy to use
Venom IMG Flasher for Viper4G 3.1.x (includes /system rw module)
http://www.androidfilehost.com/?fid=9390288116658474895
This should have you up and running in 20 min
omg im helpless
scottspa74 said:
Are you S-off? If not, you need to fastboot flash the kernel after flash ROM. Check the stickies.
Edit: or use flash image GUI to flash the kernel/boot.IMG.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
ok i dont know what s-off so its probably not that could so after i flash the rom twrp
i fastboot flash the boot.img
ok......
budeone said:
Some roms will not work if you are S-On
This one will
Viper4G 3.1.4
http://forum.xda-developers.com/showthread.php?t=2124391
You may need the tool that is very easy to use
Venom IMG Flasher for Viper4G 3.1.x (includes /system rw module)
http://www.androidfilehost.com/?fid=9390288116658474895
This should have you up and running in 20 min
Click to expand...
Click to collapse
this is the rom i have so after i flash the rom i flash the img i think somone said something about a kernal where would i get the kernal for the venom rom
battlefieldhazard said:
this is the rom i have so after i flash the rom i flash the img i think somone said something about a kernal where would i get the kernal for the venom rom
Click to expand...
Click to collapse
the 2nd link I post has everything you need
http://www.androidfilehost.com/?fid=9390288116658474895
After you download the file you need to unzip it somewhere.
Click on the VenomKernelFlasher.exe file
Click start flash
bingo
Img Flasher inquiry
budeone said:
Click on the VenomKernelFlasher.exe file
Click start flash
bingo
Click to expand...
Click to collapse
Okay so I'm running into a small issue and it really doesn't matter to me in the end but I would like to use the Viper boot img rather than the Sprint obviously. I originally flashed 3.1.4 using twrp and i can do everything i want to. However, since im in s-on mode I couldn't flash the boot img and when trying to use the img flasher, it recognizes my device, reboots to fastboot. Then my computer doesn't see the device anymore and the flasher times out and fails.
Is there a link to the latest HTC drivers im maybe missing or do i need to be in bootloader first and install a new driver? I tried going into bootloader where the tool says its rebooting to but same thing.
Again, not the biggest deal in the world but the sprint boot is just terrible.
Any input is appreciated and awesome job Team Venom, keep on being awesome!
Thanks!
Download HTC sync, install it, uninstall it afterwards to avoid future problems.
budeone said:
Download HTC sync, install it, uninstall it afterwards to avoid future problems.
Click to expand...
Click to collapse
Thanks,
I'll go ahead and give that a try tonight, just a little puzzled at what was happening and not seeing more on it, so i figured it was something i had wrong, hoping that is just it.
here is a driver only link you can try also
https://dl.dropboxusercontent.com/u/2676146/HTCDriver3.0.0.007.exe
budeone said:
here is a driver only link you can try also
Click to expand...
Click to collapse
Okay so I got it to install now, though quick question, doesn't this boot consist of a Viper boot img instead of the Sprint logo on boot?
I tried pointing to the boot.img in the img flasher and also in the Viper 3.1.4 folder... maybe i was just thinking of something else and it was for just a faster boot time.
In any case, thanks for your help.
cho danger said:
Okay so I got it to install now, though quick question, doesn't this boot consist of a Viper boot img instead of the Sprint logo on boot?
I tried pointing to the boot.img in the img flasher and also in the Viper 3.1.4 folder... maybe i was just thinking of something else and it was for just a faster boot time.
In any case, thanks for your help.
Click to expand...
Click to collapse
boot.img is the kernel. You are talking about a boot animation. 2 completely different things.
If you are using Viper rom
http://forum.xda-developers.com/showthread.php?t=2124391
They have a great theme section.
Advanced
•Fix permissions
•Zipalign apks
•Mount system rw/ro
•Disable logcat
•Wipe cache/dalvik
•Customize boot/down animation
•Customize boot sound
Click to expand...
Click to collapse
Get it while it's hot!
https://developers.google.com/android/nexus/images
EDIT: Seeing as how the bootloader has changed in this version(MANTAMD03), is it advisable to update officially via factory image or OTA?
When will the ota start coming out because I don't want to flash this as it will wipe all data
Sent from my Xperia Play (r800x)
abdel12345 said:
When will the ota start coming out because I don't want to flash this as it will wipe all data
Click to expand...
Click to collapse
Today.
abdel12345 said:
When will the ota start coming out because I don't want to flash this as it will wipe all data
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
You can also just flash the bootloader. I'm putting together a flashable zip for the system part as we speak.
CazeW said:
You can also just flash the bootloader. I'm putting together a flashable zip for the system part as we speak.
Click to expand...
Click to collapse
Where are you going to post that flashable zip at? Just want to know because I am wanting this asap to see if it helps with random reboots.
So If I flash OTA it will not wipe my data?
absolutnick said:
So If I flash OTA it will not wipe my data?
Click to expand...
Click to collapse
OTA's don't wipe data.
Do I flashed this with stock recovery ?
nightfox11 said:
Do I flashed this with stock recovery ?
Click to expand...
Click to collapse
These aren't the OTA. These are factory images. AFAIK what's posted in OP *will* wipe data.
Someone will eventually post a CWM flashable zip.
A full factory image will wipe everything but if I understand correctly, not touching the userdata.img will leave data intact. If you do that though, there's no point, in my opinion. I might flash a zip to try it out, then do the image down the road. I wipe/reinstall the OS on my computers at least once a year, and my Nexus is no different.
abdel12345 said:
When will the ota start coming out because I don't want to flash this as it will wipe all data
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
You can edit the flash-all script and just delete the 'fastboot erase userdata' line, if I am not mistaken.
Edit: you might need to remove the userdata.img file from within the image-mantaray-jw66v.zip file as well.
tublah said:
You can edit the flash-all script and just delete the 'fastboot erase userdata' line, if I am not mistaken.
Edit: you might need to remove the userdata.img file from within the image-mantaray-jw66v.zip file as well.
Click to expand...
Click to collapse
Anyone gotten it yet? Does it root the same way?
I'm getting less than 2 KB/s download so it will be a while .. geesh.
I've flashed 4.3. Doesn't seem a whole lot different to be honest, maybe a little snappier but it could just be placebo. Can't complain, it was fine before really! :good:
stiggy2012 said:
I've flashed 4.3. Doesn't seem a whole lot different to be honest, maybe a little snappier but it could just be placebo. Can't complain, it was fine before really! :good:
Click to expand...
Click to collapse
I'm just wanting the random reboots and RAM issues to be resolved.
If I just run the flash-all file, what exactly will that do?
edit: I just read the instructions. Will I still have access to TWRP?
I can't wait for a rooted flashable zip. Please let the surface flinger patch be in this.
Sent from my Nexus 10 using Tapatalk 2
If anyone needs a speedy mirror, here's a mega mirror I just uploaded: https://mega.co.nz/#!zcpGQQya!cdHuKjZcArUnURtsFLILdWnrry4_Bu0YB4_RjnzSyz4
Kernel version went from 3.4.5 to 3.4.39 -.-
I figured it out. I just removed the option to erase recovery in the .bat file, and removed the corresponding image in the zip. Yeah so far 4.3 feels smooth. Not much of a difference lol.
Anybody have a link for Flashable Zip yet?
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Details?
Are you S-Off?
Did you try to re-download or check MD5?
Is this a nightly or M-series you are trying?
swordmastr54 said:
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Click to expand...
Click to collapse
swordmastr54 said:
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Click to expand...
Click to collapse
Your recovery is probably too old. Flash the latest recovery, then try again.
tj13 said:
Your recovery is probably too old. Flash the latest recovery, then try again.
Click to expand...
Click to collapse
I updated and still have yet to try but I am not s off not sure how on this device.
swordmastr54 said:
I updated and still have yet to try but I am not s off not sure how on this device.
Click to expand...
Click to collapse
If you are not S=off you need to update the boot.img separately. I believe that is done through fastboot commands. See http://forum.xda-developers.com/showthread.php?t=2121331
tj13 said:
Your recovery is probably too old. Flash the latest recovery, then try again.
Click to expand...
Click to collapse
I have updated the recovery and it still says error executing updater binary in zip, any ideas on why it does that?
swordmastr54 said:
I have updated the recovery and it still says error executing updater binary in zip, any ideas on why it does that?
Click to expand...
Click to collapse
I am using ClockworkMod 6.0.4.8. I did recently give twrp a try. I couldn't get CM updater to work with it. It also failed to manual flash a CM11 ROM. So I went back to clockwork. Could be my bad, but that was my experience with it.
tj13 said:
I am using ClockworkMod 6.0.4.8.
Click to expand...
Click to collapse
Can you post a link to it?
I thought I had posted these links before sorry.
http://wiki.cyanogenmod.org/w/Fireball_Info
http://wiki.cyanogenmod.org/w/HTC_fstab_updates
swordmastr54 said:
Can you post a link to it?
Click to expand...
Click to collapse
You can find updated TWRP recoveries here as well : http://mdmower.cmphys.com/category/fireball/
Fastboot command: Fastboot Flash Recovery (File Name Of Recovery .img)
Or
You can get a recovery flasher from the playstore if your computer doesn't like adb like mine. I know mine is most likely driver related, I just don't feel like fixing it right now.
I used this one: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools and directed it to where i downloaded my recovery.img in my phone, it flashed it and i rebooted and had the latest TWRP.
Enjoy and hope it works for you!
wmuflyer said:
I thought I had posted these links before sorry.
http://wiki.cyanogenmod.org/w/Fireball_Info
http://wiki.cyanogenmod.org/w/HTC_fstab_updates
Click to expand...
Click to collapse
I just tried again with twrp 2.7 it still says the same thing I'm going to restore backup then switch to clockwork and try again it still said the same error.
Your profile shows you're running the HTC Vivid or Samsung S4. Do you have an Incredible 4G also?
swordmastr54 said:
I just tried again with twrp 2.7 it still says the same thing I'm going to restore backup then switch to clockwork and try again it still said the same error.
Click to expand...
Click to collapse
wmuflyer said:
Your profile shows you're running the HTC Vivid or Samsung S4. Do you have an Incredible 4G also?
Click to expand...
Click to collapse
Yes I have it, its the wife phone but I figured out the current cm11 doesn't seem to work with this device.
Odd, I'm on the 5/14 nightly and it's working great. I'll try a more recent nightly and let you know if I have any issues. S-off is pretty easy with the guides out there and then you don't need to worry about flashing the boot.img which seems cause issues for some.
swordmastr54 said:
Yes I have it, its the wife phone but I figured out the current cm11 doesn't seem to work with this device.
Click to expand...
Click to collapse
wmuflyer said:
Odd, I'm on the 5/14 nightly and it's working great. I'll try a more recent nightly and let you know if I have any issues. S-off is pretty easy with the guides out there and then you don't need to worry about flashing the boot.img which seems cause issues for some.
Click to expand...
Click to collapse
Can you link to s off I havnt done anything like that.
I expect she has the latest verizon OTA if not do that then go here
swordmastr54 said:
Can you link to s off I havnt done anything like that.
Click to expand...
Click to collapse
Had trouble with the 5/28 nightly TWRP showed "Failed" the 5/29 flashed fine. Might have been a bad download on the 5/28.
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is also available.
NOTE: if you flash the deodexed version and have problems with root, flash UPDATE-SuperSU-v2.02.zip from here. I don't anticipate any root problems, but just in case, this will fix it.
100% stock: STOCK-4.4.2-P5200(fixed).zip
Deodexed + rooted: STOCK-DEODEXED-ROOTED-4.4.2-P5200(fixed).zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
Very good work done by you! Yesterday I spent hours to unzip the file but unsuccessfully. I will try it right now! Thanks a lot!
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
edsoedso said:
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
Click to expand...
Click to collapse
I've got the same problem.
Hold on, I'm working on it
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Restl3ss said:
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Click to expand...
Click to collapse
Do not worry, I installed stock 4.4.2 using odin, than TWRP and superuser. It looks great! Please work on 4.4.2 Pimpdroid and let us known the results. Regards!
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
just uploaded a deodexed + rooted build. If you have any troubles with root flash SuperSU from the link in OP.
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I always do a factory reset, format data, and full wipe with any ROM Can you move your files to your PC via USB cable?
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I flashed without wiping and had big problems. You should really do a full wipe.
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
I just saw your note. I am downloading both versions, flash them and let you know.
i have downloaded both versions but instal failed
any way does any one know which site i can download the MD5 of the software without corruption ?
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
It seems that battery is draining faster than 4.2.2. Does anybody note it? Any solution? Thank you!
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
jamalau said:
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
Click to expand...
Click to collapse
hey man you need to wipe system, data,cache and dalvik-cache
then flash the zip and it should work
edsoedso said:
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
Click to expand...
Click to collapse
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
quitschibu84 said:
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
Click to expand...
Click to collapse
Can you post the link for the Philz 5200 recovery?
thks
I made a video on how to to Install TWRP, Busybox and SuperSU to your Asus ZenWatch 2. Let me know what you guys think.
https://www.youtube.com/watch?v=2YB0rz98tS0&feature=youtu.be
Edit: This works on 2.0 as well!
Unroot: https://www.youtube.com/watch?v=C77cHOjXo_g
Poebat said:
I made a video on how to to Install TWRP, Busybox and SuperSU to your Asus ZenWatch 2. Let me know what you guys think.
https://www.youtube.com/watch?v=2YB0rz98tS0&feature=youtu.be
Click to expand...
Click to collapse
Could use some help--i can get TWRP installed fine, even install Supersu. It just doesn't "take". https://forum.xda-developers.com/zenwatch-2/help/tried-everything-to-root-sparrow-twrp-3-t3614177
jaysonic88 said:
Could use some help--i can get TWRP installed fine, even install Supersu. It just doesn't "take". https://forum.xda-developers.com/zenwatch-2/help/tried-everything-to-root-sparrow-twrp-3-t3614177
Click to expand...
Click to collapse
Resolved it. Had to mount system to get it to stick.
@Poebat
Nice tutorial?
yash92duster said:
@Poebat
Nice tutorial?
Click to expand...
Click to collapse
Thanks!
can I use this guide also for Android Wear 2.0 ?
milanored said:
can I use this guide also for Android Wear 2.0 ?
Click to expand...
Click to collapse
No, I think the SuperSU I used in the video is for AW 1.5. You can try just make a backup before you do it
but the recovery should work with AW2.0 ?!
milanored said:
but the recovery should work with AW2.0 ?!
Click to expand...
Click to collapse
Correct
I confirmed that the recovery still works with AW2.0. The SuperSU and busybox zip fails to flash. I flashed the latest stable SuperSU zip and it flashes completely, but the SuperSU app does not open and the watch hangs up when asking for root. I flashed the latest Stericson busybox zip, but obviously I can't test if it installed without su.
Poebat said:
I made a video on how to to Install TWRP, Busybox and SuperSU to your Asus ZenWatch 2. Let me know what you guys think.
https://www.youtube.com/watch?v=2YB0rz98tS0&feature=youtu.be
Click to expand...
Click to collapse
Everytime I try to install I keep getting an error and this is after flashing to stock, reinstalling twrp and trying again.
Keep in mind I'm trying to root 1.5 not 2.0
GTDarthYoda said:
Everytime I try to install I keep getting an error and this is after flashing to stock, reinstalling twrp and trying again.
Keep in mind I'm trying to root 1.5 not 2.0
Click to expand...
Click to collapse
What are you trying to install?
Poebat said:
What are you trying to install?
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/supersu/android-wear-6-0-1-root-squashfs-t3319097
GTDarthYoda said:
https://forum.xda-developers.com/apps/supersu/android-wear-6-0-1-root-squashfs-t3319097
Click to expand...
Click to collapse
That's really odd. Are you running a stock ROM? How much free space do you have? Can you flash busybox?
Stock, wiped, stock, still nothing.
Edit:
Busy box installed
Edit:
Tried SuperSU again. no luck
I have the same problem with AW2.0. Root works after flashing the latest SuperSU but the SuperSU app itself won't open.
Gfhoihoi72 said:
I have the same problem with AW2.0. Root works after flashing the latest SuperSU but the SuperSU app itself won't open.
Click to expand...
Click to collapse
Zip from this post did the trick.
https://forum.xda-developers.com/showpost.php?p=73165371&postcount=66
It appears the issue stems from the filesystem being squashfs. I've dealt with squashfs in the past, and it doesn't allow modification due to it's structure. The system needs to be un-squashed, modified, then re-squashed. There is a ROM for the LG watch where the developer converted it to ext4, but that requires editing partitions on the watch. I'm considering converting this to ext4, but I'm not thrilled with the idea of a hard brick.
Hmmmm very very strange, after some reboots the twrp recovery is gone.
The watch boots in the stock recovery.
Is it because this is an 1.5 version?