[Q] Soft Brick. Cyanogen recovery loop. Will you please help? - AT&T Samsung Galaxy Note I717

Hello, i will try to be thorough.
BUT, i am a noob and didnt write down everything i did.
Have a I717 at&t note 1. with the 4.1.2 update originally OTA installed by keis.
I recently rooted it using Saferoot. it went well and i didnt see any problems. i flashed a custom rom and didnt like it so using clockworkmod recovery i went back to the 4.1.2. I then tried pac lollipop >pac_quicyatt_lp.beta-1.unofficial_20150327< i liked this rom but needed to flash Gapps.
This is where the trouble started. i didnt/dont know the proper procedure to flash the Gapps on top of or into the rom.
I first tried >gapps-5.0.x-20150404-minimal-edition-signed.zip< and it looked like it loaded correctly. but nothing appeared in the phone. the pac rom was still working well.
I then did more research and tried >gapps-lp-20150222-signed.zip< , again it looked like it loaded well but nothing showed up "in" the phone.
right here is where things got screwy. i had been using clorkworkmod for recovery and rebooting. and i think somewhere in developer settings i clicked something about how rebooting is handled.
because after trying to install the Gapps it went into Cyanogen recovery... and loops.
no matter what i do it goes back to cyanogen recovery.
I never knowingly installed cyanogen and dont know why it all of a sudden is going into cyanogen recovery over and over.
a list of things that may have bearing:
1. i tried reinstalling the pac rom. it loads and completes but it still just goes to recovery.
2. tried different ways of clearing cache and data wipes.
3. computer, kies, and odin 3.09 do not recognize phone.
4. have proper drivers on computer. phone was previously recognized by kies and cpu (4.1.2).
5. currently the only way to get anything into phone is by pulling sd card and reinstalling with info on it then using cyanogen recovery.
6. i have searched for about 11 hours and tried a bunch of things. but just restarts in cyanogen recovery
7. i was scared to fully try things i found that wernt specifically for the i717.
8. i could not find an original gingerbread rom. they all seemed fishy (needed downloaders. or ended in .zip.rar)
9. had backed up with clockworkmod and with titanium recovery (while in 4.1.2).
I dont know if i can reach the clockworkmod save through cyanogen recovery.... if so it seems like a great option.
10. at the bottom of the screen while loading rom is.... ---->>> E: cannot load volume /misc
11. only pac rom will successfully re-flash (even though it still just goes back to cyanogen). any other flash and it crashes halfway through.... i then restart and it just loops back to cyanogen recovery.
I searched here and tried the five recommended posts.
I could not try a lot of the "fixes" because the phone isnt recognized by cpu or odin (computer does beep when connected but doesnt show up anywhere).
Can you help me get back my phone please?
Randall

added
This is the only site i am asking for help on. I am willing to reply quickly and put in the time!
Thank you very much for reading this far.
Randall

Related

[Q] Samsung Galaxy Tab 10.1 bricked?

Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.

[Q] Cyanogenmod 7 installation problem

Hey everyone, my problem is genuinely mind blowing.
- I installed ROM Manager
- I flashed CWM Recovery
- Rebooted into CWM Recovery
- Downloaded CM7 and proceeded with the installation.(checked the cache wipe options too)
- It goes down to installing and...gets stuck. Nothing happens. It just says "installing update" or something similar.
My OS is ICS 4, is this the problem?
Also, is it absolutely necessary to have a micro SD inserted? I believed it could be done without one, but couldn't.
UPDATE: it somehow installed now, but it hangs at the boot screen. What is this about?
Thanx.
you have to atleast 2 or three times flash to get it worked
Thanx.
I eventually managed to brick it, so had to reinstall ICS
I believe this thread can be locked.
for your Notice :
In future Rom manager is not advisible for a smooth operations on the SGS2, it is highly recommended to use rooting kernels like CF-root for rooting the phone, it will provide CWM as well.

[Q] I am about to give up. There must be a solution but I cant find it

Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE

Stuck in a bootloop - furthest I get is "Upgrading android apps"

So. My phone was lying on the desk and all of a sudden, it turned off beeped a couple of times for "low battery" and went into a bootloop. As stated in the title, the furthest I have gotten it to is "Upgrading android apps" or something along these lines (I dont remember the exact wording) but ALWAYS after that steps it loops. I have access both to recovery (tried flashing ArchiDroid through CWM, tried wiping etc) and download. Nothing I did so far seemed to have helped. It does go past the boot animation but even logcat didn't offer any suggestions aside from the phone dying on the "upgrade" step.
I was running cyanogen mod (can't remember the precise version number atm) when it happened along with barebones CWM. No tweaks were made besides whatever CM did.
Also, this may be relevant: I am getting this error when trying to wipe dalvik: E:unable to mount sd-ext . No idea why.
The only idea I have left currently is to try and use Odin to reflash pit, maybe bootloader and then stock firmware followed by rooting via Chainfire AutoRoot. Any tips, suggestions or ideas as to what may be causing this?
/thread
FIxed it myself by flashing a stock galaxy rom via odin + stock recovery. Followed by Chainfire AutoRoot, then ROM manager for easy CWM recovery download and then flashing ArchiDroid

Galaxy S3 - need help with custom rom

Hi all
I hope that I am posting in the correct place
I need help with my Galaxy S3 SGH-T999
Recently the phone died on me, it was stock rom and with the updates through some of the apps, the phone stopped working correctly. I don't use the phone for making calls, etc, but need it for pictures and a few other apps. The phone is from T-mobile.
I tried to reset the phone and that worked until all the updates were back on and then back to the same problem.
So I decided to put on a custom rom on the phone.
I have tried the following roms:
cm-14.1-20161225-NIGHTLY-d2tmo
I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME
RevolutionaryS5-V3
Slim-d2tmo-6.0.1.alpha.0.1-UNOFFICIAL-20160516-1346
I first installed CWM recovery and then transferred the roms over to the external sd car (also the internal card), went to boot manager (vol up) and installed the files.
It looked like the installation worked but when selecting reboot, the phone would not come back on.
I then loaded up Kies and reset the phone back to factory defaults and only then does the phone load back up after reboot.
Every time I try the custom rom - I run into the same problem
At first I thought the phone was bricked and found info about the jtag and then found something about using an SD card with the following image installed on it - tmobile-T999_4.3_debrick
With the SD card in the phone I can boot to either menus and also able to get the phone to boot to the slim-d2tmo rom. But when I pull the SD card, the phone won't boot. Nothing, no power, nada
I am not sure what I did wrong, followed the direction on the site and thought I did it correctly.
Not sure if I deleted some file, or partition needed or what. I would greatly appreciate some help with this.
Also I would like a custom rom that is stable and fast. I don't need all the bells and whistles but one thing I would like and that is for the camera to be able to take pictures using voice. I know the stock rom allows for this. Not essential but preferred.
Please help with detailed instructions.
Thanks in advance.
It,s amazing
Please elaborate. What's amazing.
Boot into download mode and confirm the model # of the phone. I see you tried to flash I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME which not for the the T999, it's for the gt-i9300.
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Rraayy8 said:
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Click to expand...
Click to collapse
OPen Odin, uncheck everything except f reset time. Flash TWRP. When you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, replace the battery, boot directly into recovery.

Categories

Resources