Hi
I removed my quick remote app to install new version or ported version of G2,but all the others app were not installed !
i downloaded several different version of this app,bu all of them did not install completely !
and i checked these pages :
http://forum.xda-developers.com/g2-mini/help/quick-remote-t3027191
http://forum.xda-developers.com/g2-mini/themes-apps/quick-remote-t2836337/post60177206#post60177206
please lead me how to install it again
thanks
thanks to Eta82
solution is on the below page:
http://forum.xda-developers.com/g2-mini/themes-apps/quick-remote-t2836337
dowload the file:
qremote.rarhttp://www.4shared.com/rar/K9mng2Oxba/qRemote.html
and then Unzip and copy the folder
Code:
system / app
give permissions
Code:
-rw-r - r--
thanks to Eta82
solution is on the below page:
http://forum.xda-developers.com/g2-mini/themes-apps/quick-remote-t2836337
dowload the file:
qremote.rarhttp://www.4shared.com/rar/K9mng2Oxba/qRemote.html
and then Unzip and copy the folder
Code:
system / app
give permissions
Code:
-rw-r - r--
Related
INTRODUCTION
HI GUYS..!
Though there are many threads explaining about the set up of android kitchen and deodexing roms...i found it a bit confusing,as most of the threads take you to different threads which again explain the steps in detail,most of which though informative is unnecessary as they are General threads .. so,TODAY i will be explaining simple step by step procedures from setting up cygwin to doedexing a rom for our devices...
THIS THREAD IS FOR L3 BUT SHOULD WORK ON L5 AND L7 ALSO ( for extracting &deoxing-Only First generation ie; L3,L5&L7..Not for L3 II,L5 II, L7 II ,but the method for android kitchen is common for both generations)
THINGS NEEDED(DOWNLOADS)
1.JAVA- download here http://java.com/en/download/manual.jsp
2.LG EXTRACTION KIT PUT TOGETHER BY ME -
http://www.mediafire.com/download/qdxgh0hqznph3nf/KDZ_extraction_Kit+kitchen+cygwin.rar
Click to expand...
Click to collapse
STEP 1-INSTALL JAVA (just download and install it)
STEP 2- SET UP CYGWIN (This method is for Windows-i have provided the 32 bit setup ,for 64 bit download the setup from website below and skip to step 3) for 64 bit users - http://www.cygwin.com
1.extract the rar file i have provided and open the folder
2.open setup-x86.exe - don't proceed
3.open the cygwin setup guide provided in the folder and follow the steps
Click to expand...
Click to collapse
STEP 3- SET UP ANDROID KITCHEN
1. open the folder u extracted from my rar file
2.right click on Android-Kitchen-0.224_2 and extract here
3.now copy the "kitchen" folder to c:\cygwin\home\(your_user_name)\
[Note :: make sure that ur username does not contain any spaces (eg; homepc) (not eg; home pc) ;if it does then copy to c:\cygwin\home\ ]
Click to expand...
Click to collapse
STEP 6- CHECK IF ANDROID KITCHEN WORKS
1.Right click on the desktop shortcut of cygwin and run as administrator
2.type
Code:
cd kitchen
for people who have spaces in there user name
Code:
cd /home/kitchen
3.to open menu
Code:
./menu
IF YOU DONT GET ANY ERRORS THEN PROCEED TO THE NEXT STEP
Click to expand...
Click to collapse
STEP 7- EXTRACTING THE KDZ FILE(For custom odexed roms proceed to STEP 9)
(For the users who don't know about the .kdz , it is the file format for the stock lg rom firmwares,...to download the kdz files goto-
http://lg-phone-firmware.com/index.php?id_mod=11 and download the firmware that suits you accordingly...im using v10k open eupore )
1.open the folder u extracted from my rar file
2.rightclick on lgextract LGExtract-0.2.1 and select extract here
3.copy the .Kdz to the extracted folder
4.type
Code:
LGExtract.exe -kdz V10X_xx.kdz
(wherein "v10X_xx " stands for the version of kdz u want to extract eg v10k_00)
5. you should end up with three files a .dz file ,a .dll file and a .cab file ( eg DZ_LGE400AT-00-V10k-EUR-XXX-AUG-08-2012+0.dz ; QCT_E400_20120703.dll and V10k_00.cab
Click to expand...
Click to collapse
STEP 8-EXTRACTING THE ..DZ FILE
1.open the folder that u extracted from my rar file
2. rightclick on the DZDecrypter_v0.5.rar file and select extract here.... do the same for the DZDecrypter_v1.0b.rar file
3. now "copy" the .dz file into both extracted folders
4. open the extracted DZDecrypter_0.5 folder and type
Code:
DZDecrypt.exe LGE610AT-xx-VxxX-XX-XXX-xx-xx-20xx+x.dz
wherein "LGE610AT-xx-VxxX-XX-XXX-xx-xx-20xx+x.dz" is name of the .dz file
5. open the extracted DZDecrypter_v1.0b and do the same
6. now what we need is the boot.img ;recovery.img and system.img
7.make a new folder
8.to get the boot.img and recovery.img go to the DZDecrypter_v0.5 folder and copy the two files to a folder u created
9.to get system.img go to the DZDecrypter_v1.0b folder and find the file named system.img.ext4
10. just rename it to system.img and copy it to the folder u created
Click to expand...
Click to collapse
STEP 9- EXTRACTING THE SYSTEM.IMG and deodexing the System Files
(FOR CUSTOM ROMS CREATE A FOLDER IN C:\cygwin\home\your_user-name\kitchen\ AND NAME IT "WORKING_090313_013348" AND COPY THE META-INF;SYSTEM AND BOOT.IMG INTO IT AND OPEN THE KITCHEN MENU AND FOLLOW FROM THE11TH STEP )
Click to expand...
Click to collapse
NOTE :custom rom users use can this command via the terminal emulator to obtain the system file's on the rom... it is recommended to do this on a Fresh installation or else you will obtain a lot of unwanted files along with the ones needed ..
Code:
su
tar -c system/* >> sdcard/system.tar
Click to expand...
Click to collapse
this will create a .tar file on your sdcard which u can latter transfer to your pc and extract using winrar or 7zip
The files needed are
/app
/bin
/etc
/fonts
/framework
/lib
/media
/semc
/usr
/xbin
build.prop
Click to expand...
Click to collapse
delete the rest of the folders
1.COPY THE BOOT.IMG AND SYSTEM.IMG TO c:\cygwin\home\(your_user_name)\kitchen\original_update
2. open cygwin as adminstrator and open the kichen menu(refer step 6)
3.select option 1 -set up working folder from rom
4.select default 1
5.select n (dont change name)
6.select ext2explore
7.follow the instruction on the cmd
8.select n (don't extract cache.img)
9.select y (view rom info)
10. press enter to continue
11.select option 0 (advanced options)
12.select 11 deodex files in your rom
13.select v and change API LEVEL to 10(this is for gingerbread rom ie 2.3.x for other rom select accrdly)
14.select b deodex both folders ( sometimes u can get errors for few apks to resolve that delete the apks in the location below in system/app ...you have to delete both the .apk and .odex ; PS:don't delete the others they are deodexed...!)
15.press enter
16. view the contents of the folder navigate to C:\cygwin\home\your_user-name\kitchen\WORKING_xxxxxx_xxxxxx u'll find the deodexed apks in system\apps
17.now u can make changes to the file.
Click to expand...
Click to collapse
(OPTIONAL:I have not tried the zip but should work well)
STEP 10- FLASHING THE DEODEXED FILES TO THE ROM
1. open the folder that u extracted from my rar file
2. install 7 zip (7z920.exe) ignore if already there
3.rightclick on 'deodex.zip' and select open with 7zip
4.open system in 7zip
5.replace the /app and /framework from the folders in C:\cygwin\home\your_user-name\kitchen\WORKING_xxxxxx_xxxxxx\system
(Just drag and drop in the opened .zip file)
6. copy the zip file to the sdcard of ur phone
7. flash it via cwm
Click to expand...
Click to collapse
ANDROID KITCHEN IS A AWESOME TOOL ..ALMOST ALL OF THE STEPS IN IT ARE SELF EXPLANATORY ...I SUGGEST THAT U PLAY AROUND WITH IT TO GET USED TO IT ..
CREDITS
@dsixda FOR ANDROID KITCHEN
http://forum.xda-developers.com/showthread.php?t=633246
@pankaj88 FOR KITCHEN SETUP FOR DEODEX
http://forum.xda-developers.com/showthread.php?t=1767392
@Homero2 FOR LGEXTRACT EXTRACTING KDZ FILE
http://forum.xda-developers.com/showthread.php?t=2180586
@copsfrance FOR DZDECRYPT
@yayakuya & @andwie
FOR INTRODUCING ME TO THE THREADS..!
FOR ANY FURTHER QUESTIONS PLS REFER THE LINKS IN CREDIT AS THEY MOST PROBABLY WOULD HAVE BEEN ANSWERED THERE DO YOUR RESEARCH SEARCH AND LEARN ASK QUESTIONS ONLY AS A LAST RESORT NO ONES' A EXPERT ..!
NOTE :: Always make a backup before changing system apk's..! Not responsible for any damages..!
HIT THANKS BUTTON IF I HELPED YOU
THANK YOU...!
Great guide,very good explained and very helpfull,thanx.:thumbup:
GREEEEETZ!!!!
stock rom?
what about stock rom??
-CALIBAN666- said:
Great guide,very good explained and very helpfull,thanx.:thumbup:
GREEEEETZ!!!!
Click to expand...
Click to collapse
thanks man ..!!Much appreciated
arjunrambz said:
what about stock rom??
Click to expand...
Click to collapse
you'll need the boot.img so you have to download the firmware (check in the about phone should be like 10 j or something ) and follow from STEP 7 for any other doubts you can use the links in the credits..!
heres the link to download firmware for l7
http://lg-phone-firmware.com/index.php?id_mod=13
Thanks alot for this
Sent from my LG-E400 using XDA Premium 4 mobile app
skiplou_memory said:
Thanks alot for this
Sent from my LG-E400 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you always welcome..!:good:
Im getting an error while trying to extract the .dz file...
C:\Users\Aleksandar\Desktop\Decrypter 1>DZDecrypt.exe LGP710AT-00-V10f-EUR-XX-JU
L-23-2013+0.dz
DZ-Decryptor v1.0b *ALPHA RELEASE* by BIGB0SS from COPS.
[■] Opening file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
[■] Allocated memory: 1280 Mo.
[x] Invalid markers in main header.
[■] Closing file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
aleksandar_021 said:
Im getting an error while trying to extract the .dz file...
C:\Users\Aleksandar\Desktop\Decrypter 1>DZDecrypt.exe LGP710AT-00-V10f-EUR-XX-JU
L-23-2013+0.dz
DZ-Decryptor v1.0b *ALPHA RELEASE* by BIGB0SS from COPS.
[■] Opening file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
[■] Allocated memory: 1280 Mo.
[x] Invalid markers in main header.
[■] Closing file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
Click to expand...
Click to collapse
This method is only for first generation of L series. You tried to extract dz of P710 (L7 II) so obviously it won't work.
andwie said:
This method is only for first generation of L series. You tried to extract dz of P710 (L7 II) so obviously it won't work.
Click to expand...
Click to collapse
So is there a way i can extract that .dz?
aleksandar_021 said:
So is there a way i can extract that .dz?
Click to expand...
Click to collapse
No, not for your device yet.
aleksandar_021 said:
Im getting an error while trying to extract the .dz file...
C:\Users\Aleksandar\Desktop\Decrypter 1>DZDecrypt.exe LGP710AT-00-V10f-EUR-XX-JU
L-23-2013+0.dz
DZ-Decryptor v1.0b *ALPHA RELEASE* by BIGB0SS from COPS.
[■] Opening file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
[■] Allocated memory: 1280 Mo.
[x] Invalid markers in main header.
[■] Closing file "LGP710AT-00-V10f-EUR-XX-JUL-23-2013+0.dz".
Click to expand...
Click to collapse
Sorry i din't mention it ,this is only for the first generation ;ie l3,l5,l7 (not l3 II,L5 II,L7 II)
after deodex, how to create the KDZ file as before? You can help me?
dn80 said:
after deodex, how to create the KDZ file as before? You can help me?
Click to expand...
Click to collapse
Use can Use this
http://forum.xda-developers.com/showthread.php?t=2179431
Extract apps from stock KDZ
Hello
I'm trying to extract two applications from a Stock Rom KDZ file from my LGE975
I have installed the pacman 4.3 rom, and lost two apps very importante for me. The Diodioct and the Quick translator.
I now that there is thread only for that, but I have already install it and I get a message say "wrong phone model"
I have ask for more help and no answer until now.
So I found this thread i'm asking if there is a way two extract this two apps and install it on my phone with the pacman rom?
Thanks
!!! You require root rights !!!
1. If you have old or any other flashplayer, uninstall it;
For further manipulation, I used RootExplorer
2 . Copy ,,Flashplayer.apk" to the folder /system/app and set permissions to "rw-r - r -
3 . In folder /system/lib create a new folder name "plugins". This folder permissions set to "rwxr-xr-x"
4 . In Folder "plugins" , create another folder name "com.adobe.flashplayer" and just change permissions to "rwxr-xr-x"
5. Copy ,,libflashplayer.so" to the folder /system/lib/plugins/com.adobe.flashplayer and set permissions to "rwxr-xr-x"
6. Reboot the device .
7. After restarting the application menu, run flashplayer.
If you see settings page flashplayer, then it is working
Tested and it's working on my Lenovo K900
Many user face problem with wps connect or wpa wps tester app in motion rom so i got solution for it work but to the limit of apps
Here is solution download the attached file below and using es file explorer copy to
/system/bin/
And give permission rwx r-x r-x
And reboot
Note: download the attached file and rename
wpa_cli.txt to wpa_cli (I.e remove the .txt extension)
And ya i am not responsible for any type of liblities occurs with mobile or with you
Hit thanks if i help
Guy..how to download that file..i cant download
idjon79 said:
Guy..how to download that file..i cant download
Click to expand...
Click to collapse
sru for rude
Just see the wpa_cli.txt in attachment and download it and rename to wpa_cli
If you r using uc browser then try opera mini or defult browser to download the file
Whats sup guys?I been using dragonface to make custom roms for my android device.So i decided to make a guide showing you how to make your own.Enjoy.Make sure to thank me! alright lets get started
Basic Requirements: - Dragonface V2.2.0 V2.2.3 (download here in this Forum)
- Dragonface Tutorial, and knowledge of the basic functions (download here in this tut)
- Windows Explorer
- Notepad++ (http://notepad-plus-plus.org/download/v6.6.9.html)
- ROM you want to modify
- Phoiexcard
If additional tools are requiered, they are mentioned in the regarding Instruction.
Common Steps for all modifications: STEP 1: extract your ROM (*.img) with Dragonface
STEP 2: change to Windows Explorer
ATTENTION: don't shut down DragonFace or copy the needed directories and
files some where else if you want to work "offline" (Directories: CPFOP, fsop -
Files: sysconfig.lhs), because DragonFace erases everything while shuting
down
STEP 3: Save the modified ROM with Dragonface
ATTENTION: If you worked "offline", do first Step 1, and then replace the
created Directories/Files with your modified
STEP 4: Flash your ROM (.img) with the Onda Suite
So let`s start.
PS.: If you try your own modification, it would be good to make only one after the other, and test between two modification. This makes it easier to solve problems when it´s not working like you except it, because you know what causes the problem.
HowTo - Increase the available space for your Apps (Firmware V1.0.0 - V2.1.3 all Versions)
1. You have done Step 1&2 in the first post
2. Now navigate to the following directory with the Windows Explorer ( must be set to show hidden Files/Directories!)
c:/User/..your Username../AppData/Local/Temp
3. Find the file sysconfig.lhs
4. Open it with Notepad++
5. Navigate to the following:
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 4194304
user_type = 0x8000
6. Now change the value of size to the space you want
The current value of 4194304 stands for 2GB, that means you have to multiply 2097152 by the amount of GB you want to have for your Apps
for example: 6GB = 12582912
7. Save sysconfig.lhs
8. Save .img in Dragonface
9. Flash your ROM - Done!
Her is a link to a video tutorial (in chinese): http://v.youku.com/v_show/id_XODEzODEwNzQ4.html&usg=ALkJrhhE_ACHQznY8ibrYYK7wMCYzcWCJg
Since the test version of Android 5, there is no seperat app partition in the firmware anymore.
HowTo - PreRoot your ROM (Firmware V1.0.0 - V2.0.2 all Versions)
1. You have done Step 1&2 in the first post
2. Now navigate to the following directory with the Windows Explorer
.../Dragonface_2.2.0/CPFOP/bootfs/skel
3. Find the file init.rc
4. Open it with Notepad++
5. Insert after Line 293:
su root
chown root root /system/app/superuser.apk
chown root root /system/xbin/su
chown root root /system/xbin/daemonsu
chown root root /system/bin/.ext/.su
chown root root /system/etc/.installed_su_daemon
chown root root /system/etc/install-recovery.sh
chown root root /system/etc/init.d/99SuperSUDaemon
chmod 6755 /system/xbin/su
chmod 6755 /system/xbin/daemonsu
chmod 0777 /system/bin/.ext
chmod 6755 /system/bin/.ext/.su
chmod 0644 /system/etc/.installed_su_daemon
chmod 0755 /system/etc/install-recovery.sh
chmod 0755 /system/etc/init.d
chmod 0755 /system/etc/init.d/99SuperSUDaemon
chmod 0644 /system/app/superuser.apk
chmod 0755 /system/xbin/busybox
6. Save init.rc
7. Now navigate to the following directory with the Windows Explorer
.../Dragonface_2.2.0/fsop/system
8. create the directories and place or replace the needed files if not already present (check filesize, paths and files see
Step 5)
Download needed files here: https://mega.co.nz/#!XU5EFaBK!9ZFnDrzJnlGWoMOISkzQ-dczBKUB6cM8O3aswEjI2IY
Attention: Windows Explorer is not able to create the directory /system/bin/.ext, because it doesn't like the
leading dot.
So open "Command Prompt" and type mkdir .ext to create the directory (navigate before to ..system/bin)
9. Save .img in Dragonface
10. Flash your ROM - Done!
HowTo - PreRoot your ROM (Firmware V2.1.0 - V2.1.3 all Versions)
Step 1 - 10 are the same, only change:
Step 5:
chmod 0755 /sbin/busybox (Instead of: chmod 0755 /xbin/busybox)
Important: If you reopen a prerooted ROM with Dragonface, you have to recreate the .ext folder again and place .su again in it. During the extracting the .ext folder disappears due the restrictions of Windows. Saving without recreating breaks the prerooting!
HowTo - Theming your system:
The following instructions are made for the new V2.1 Firmware and should work with all Versions.
Indroduction: now we start modifying existing APPs. In the first step there are HowTo´s which can be easy done without using any app tools. The simple reason for that is, as long as we don´t take away or add graphics inside an app, and only modify them, for Android everything is fine. When we start to add or remove files inside the app or we want to change the behaviour of an app or add Features, for example in the Settings menu, we will need to de- and recompile and sign the app, ortherwise it won´t work. But this will come later.
Change the default Wallpaper:
additional needed programs: WinRAR
1. First find a Wallpaper you like with a Resolution of 2048*2048 and .jpg format, and save it to your computer
2. Rename the Wallpaper to default_wallpaper.jpg
3. Do the steps 1&2 in the first Post
4. Navigate to fsop/system/framework and find: framework-res.apk
5. Open it with WinRar and navigate to the folder drawable-nodpi
6. Now insert your Wallpaper with drag´n drop
Attention: There is now a Window popping up and asks you what to do. Choose under "COMPRESSION
METHOD" on the left side the option "SAVE".
When you look on WinRar you see that the pictures aren´t compressed, so just leave them
uncompressed.
7. Close WinRAR and you are done!
8. Save .img in Dragonface
9. Flash your ROM - Done!
Change the Wallpaper on the LockScreen (Firmware V2.1.0 - V2.1.3 all Versions)
additional needed programs: WinRAR
1. First find a Wallpaper you like with a Resolution of 2048*2048 and .jpg format, and save it to your computer
2. Rename the Wallpaper to wallpaper_03.jpg
3. Do the steps 1&2 in the first Post
4. Navigate to fsop/system/priv-app and find: JuiKeyguard.apk
Alternativ, on a running system, copy JuiKeyguard.apk to your PC, make the changes descriped in the next
steps and copy the modified apk back to the tablet. Don't forget to set the right permissions for the apk.
5. Open it with WinRar and navigate to the folder drawable-nodpi
6. Now insert your Wallpaper with drag´n drop
Attention: There is now a Window popping up and asks you what to do. Choose under "COMPRESSION
METHOD" on the left side the option "SAVE".
When you look on WinRar you see that the pictures aren´t compressed, so just leave them
uncompressed.
7. Close WinRAR and you are done!
8. Save .img in Dragonface
9. Flash your ROM - Done!
When you chance the Lockscreen Wallpaper direct on the tablet (already running system), wipe the Dalvik Cache, otherwise the Wallpaper won't change.
Change the icons in the Statusbar
additional needed programs: WinRAR
Paint.net (optional)
1. Do the steps 1&2 in the first Post
2. Navigate to fsop/system/priv-app and find: JuiSystemUI.apk
3. Open it with WinRar and navigate to the folder drawable-xhdpi
4. Look for the icons you want to change and notice the resolution
Optional: you can edit the icons by using Paint.net
5. Replace the icons you want with drag´n drop or replace the icon with an already existing in the folder (make a duplicate and rename the duplicate to the correct filename)
THEY SHOULD HAVE THE SAME RESOLUTION AND MUST BE IN .PNG FORMAT!
DON`T ADD OR REMOVE ICONS, ONLY REPLACE THEM USING THE CORRCT FILENAME - OTHERWISE YOU
CORRUPT THE APP
IF YOU WANT TO ADD OR DELETE ICONS OR ADD NEW FEATURES YOU HAVE TO DE- AND RECOMPILE IT
Attention: There is now a Window popping up and asks you what to do. Choose under "COMPRESSION
METHOD" on the left side the option "SAVE".
When you look on WinRar you see that the pictures aren´t compressed, so just leave them
uncompressed.
6. Close WinRAR and you are done!
7. Save .img in Dragonface
8. Flash your ROM - Done!
Enjoys and press Thanks!!!!!!!!!!!!!!!!!
Dragonface software
Hello,
Are there any guides/tutorials for the Dragonface software in english anywhere please? I have googled but they are in Chinese or some other other language. Something for Dragonface v2.2.5 would be appreciated.
Thank you.
trustytrev.
Sir this is tutorial for dragonface in english
more space for apps in V989 v1
Hello,
firmware
989 Air Core8 v1.0.6_v2.img
onda v989 v1
I use dragonface to add space for apps. then i use phoenixsuite to apply img file modified... but it no works!
i need to back 989 Air Core8 v1.0.6_v2.img
this table have 2Gb for apps 2gb RAM and 32Gb more...
heeelp please
Devmountsu77 said:
Sir this is tutorial for dragonface in english
Click to expand...
Click to collapse
Hello,
Sorry I was meaning how to video tutorials of using the dragonface software in english.
I have now found something that was suitable for me as a complete novice.
Thank you.
trustytrev.
A83T
I have tried using Dragon Face for A83T image file. But looks like I am stuck.
The Software does unpacking properly. But during packing image, I am not sure what goes wrong, the initial Green Progress bar of Flashing Firmware also does not show up in the device.
I have in fact tried - unpacking stock firmware and packing the firmware without making any changes to the Image.
It fails!
Any help will be greatly appreciated.
bumping this old thread trying to root this POS irulu tablet I got the firmware image rooted and resaved
flash it but it hangs at the pre-boot splash
edit: I am pretty sure its either a int.rc or su binary problem, if I flash just the stock boot/env it boots
so there is something in the init.rc it doesn't like
here is my init rc
https://pastebin.com/NwZ9ntEB
after hours of monkeying about with it I am pretty sure its a issue with dragonface
any attempt to modify int scripts results in it hanging on splash, possibly some form of boot image checking
I can modify system all day long but I can't touch the boot partition
I don't have the capability to build a generic twrp image for the A33 so I can't even get to a decent recovery
Bringing this thread back to life, is there a way to set the default launcher through file manipulation (as with the above tutorial) rather than with ADB or in the Android Settings app? I've been searching, but haven't found any good information.
Edit: Nevermind, it was an issue with the default launcher and possibly pheonixcard. Got it resolved
Aug 28 (21 hours ago)
I have tried so many options/blogs/scripts to install GooglePlay for Emulator (running through Android Studio) but it never works. I have seen so many different errors
1. Failure [INSTALL_FAILED_UPDATE_INCOMPATIBLE]
2. Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
3. No space left on /system
Why is it so hard to install GooglePlay on Emulator, can someone provide steps or GApps that work with Marshmallow/Noughat.
Here's the gist of what I have tried :
1. Copy GApps from http://opengapps.org/ [ Platform: x86_64; Android: 6 & 7; Variant: full ]
2. Extract the zipped file to temporary folder and then extract following apks from it to another folder
* gsfcore-all/nodpi/priv-app/GoogleServicesFramework/GoogleServicesFramework.apk
* gsflogin-all/nodpi/priv-app/GoogleLoginService/GoogleLoginService.apk
* gmscore-x86_64/nodpi/priv-app/PrebuiltGmsCore/PrebuiltGmsCore.apk
* vending-all/nodpi/priv-app/Phonesky/Phonesky.apk
3. Try pushing these apks through this script
IMAGE_NAME=Nexus_5X_API_24 #Nexus_5X_API_23
emulator @${IMAGE_NAME} -no-boot-anim -writable-system &
adb wait-for-device
adb root
adb shell stop
adb remount
adb push PrebuiltGmsCore.apk /system/priv-app/
adb push GoogleServicesFramework.apk /system/priv-app/
adb push GoogleLoginService.apk /system/priv-app/
adb push Phonesky.apk /system/priv-app/
I would really appreciate any help !!
Hello and welcome to XDA Q&A section of the Forums.
In the .zip file you got from GApps, there should be a thing called "updater-script" located in the first folder then the subfolder of that and so on till you find it. In this script it tells your recovery what do you with the file rather than just smile at it . I guess you can say it is time for a human to do those steps manually instead (I guess you can say that).
If I helped, hit "thanks" .
Its not clear by your comments what you are suggesting, you mean to say that I should read this script "updater-script" and apply those steps manually ?
maqzee said:
Its not clear by your comments what you are suggesting, you mean to say that I should read this script "updater-script" and apply those steps manually ?
Click to expand...
Click to collapse
Yup! Use notepad++ to view it btw, good luck! At least it's not smali code.