Follow instructions in Blue 1pm est
Step 1: Talk and Text
What you need:
A QPST
B. HTC Diagnostic drivers for the Hero
C A Windows PC with either win7, XP or Vista running in 32 bit mode (64 bit will not work)
e. Cricket's 01039.prl -- get it here
fast PRL change dial ##PRL# and phone will enter prl mode, just browse to your sdcard and select 1039PRL, hit menu to change prl. Phone reboots. now call *228 to activation and program. NOW SKIP TO STEP 2.
step 1 long route
1. Once you have all of the items above installed, go to your number pad on your ERIS and dial ##3424# and hit Call. You will see a screen come up on the ERIS called the "DM Command Service."
2. Now, plug in your phone via the USB and your computer should install the necessary drivers. These will be the drivers mentioned above.
3. Once they are installed, open QPST Configuration, Listed under the QPST Folder on your start menu.
4. Click Ports, then click "Add New Port". You should see a port in the left part of the window. If not, unselect the button that says "Show Serial And USB/QC Diagnostic Ports Only".
5. Select the port and Click OK. There may be several ports, so repeat this process until you see a port where it says "Surf..."
6. Take not of which port says Surf, then open CDMA Workshop. Do not close QPST Configuration yet.
7. On the right side of the window select the same port as was in QPST with the word "Surf..." next to it and click "connect".
8. Click on the Security Tab on the top of the screen and click "Read" under the SPC/User Lock, ensuring that the default setting is listed in the drop-down menu.
9. Select the 6 digit number it generates and copy it.
10. Go back to the QPST Configuration and click on "Start Clients" and click on "Service Programming".
11. It will come up with a window displaying active phones. You should see one, the Surf....(whatever). Select it and click OK.
12. Click "read from phone". It will ask you for an MSL/SPC Code. Paste the 6 digit code you copied earlier and click Ok. In the settings tab you will see a box for the MSL/SPC code. Replace whatever is written in it with six zeros (000000). Click "write to phone". Ignore any errors that occur.
13. Click The CDMA Tab. Under Directory Number enter your 10 digit cricket number.
14. Click The Display Tab and type "Cricket" in the Banner.
15. Click the Roaming Tab and click "Browse" under the Preferred Roaming box.
16. Find and select the 01039.prl that you downloaded.
17. Click Write to Phone on the bottom. Ignore any errors that occur.
18. Unplug phone and dial *228.
Step 2. Setting up Web
What you need:
The same programs and drivers listed above
Anycut.apk-- get it in the android market place VIA Wifi.
1. Connect Phone Via QPST and open Service Programming. (See steps 1-3, 10 above)
2. Once you have begun Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000) -see step 12 above.
3. Click M.IP (may be M.IPv6 and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary ha, and secondary HA to all zeros.
7. On both HA Shared and AAA Shared Secret, click enter text string and type in the following password (all lower case): cricket
8. click ok
9. Set active user as 0.
10. Click PPP Config
11. The "Um" Button
12. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter cricket in the password box.
13.Click "AN" Button and repeat step 12.
14. Click "write to phone". Ignore any errors that occur.
YOUR DONE NOW
NexT Follow instructions from the 3rd post. Below by Token419 to apply cricketmmsweb.zip in recovery for fully functional web/MMS/and apps
15. Install the anycut.apk mentioned above on your HTC ERIS. If you need help with that, pm me and I will explain a few ways to do it.
16. Open Anycut and click New Short Cut.
17. Click Activity and scroll down to Proxy Settings. Select it and Click Ok on the window that comes up.
18. Go to The home screen on your Hero and find the Proxy Settings on your hero.
19. For Hostname enter: wap.mycricket.com and for port enter 8080.
Step 3: MMS!
What you need:
a. Android SDK---
b. Modified Telephony.db --
c. Have Eris phone flashed for talk text and web (see above if you have not done this).
1. Unzip android sdk to a place where you can find it (the shorter the directory name the better as you will soon see. Mine is saved in C:\android
Also unzip the telephony.db into a folder where you can find it. Mine is saved in C:\android
2. In windows xp click start, then run, then type cmd and hit enter. In Vista or windows 7 click start and type cmd in the search and hit enter.
3. Navigate to the folder where you unzipped the Android SDK. If you are not familiar with the command prompt, I will make a list of the commands I enter in blue. The rest you see will be the text that will be generated by the command prompt: CD the directory of adb!!! ex. type cd hit space the drag the tools folder into cmd window. now you can adb push/adb pull etc.
4. Type the Following command
C:\android\tools>adb root
* daemon started successfully *
adbd is running as root
--------------------------------------------------------------------------------------
5. Send the Modified telephony.db to the phone with the following command (keep in mind that you will need to substitute the directory I am using for the one where your telephony.db file is located
C:\android\tools> adb push c:\android\telephony.db /data/data/com.android.providers.telephony/databases/telephony.db
85 KB/s (4096 bytes in 0.046s)
6. Unplug your Phone and hold the power button to turn it off. Turn it back on and there you go!
some roms arent allowing the telephony.db to work giving 245kb/s or any other like 130kb/s.
My advice is if you get one to work, do a Nandroid back up, so you will always have a working web browser and MMS.
Download link 1 Download Link 2
.....space.....
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
As promised here is a zip file containing 2 flashable zips:
One will handle the OS side to get Web/MMS up and running
The other will only do the web portion (Some people don't have good luck with the MMS that i did)
Download from the attachment below, or from here:
http://www.multiupload.com/EKQ8CC27Y9
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
token419 said:
your instructions/title look exactly like brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit also you may want to change the words "hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from cdma ws, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. I simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
as promised here is a single flashable zip that will hande the os side to get web/mms up and running
download from the attachment below or from here:
http://www.multiupload.com/lx7zvgloc2
as always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
so does the same process work for metro pcs and where can i get those files
Should work with any carrier so long as you know the proxy information and apn settings, in my zip you can modify the autostart.sh file and change the port numbers and ip addresses to match your carrier, then you can edit the apn to match your carriers settings as well and you should be good.
Im working on getting one for metro for you all, but i dont have all the info required and iv been busy with work, its really simple to do, i just haven't gotten around to it yet.
token419 said:
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
As promised here is a single flashable zip that will hande the OS side to get Web/MMS up and running
Download from the attachment below or from here:
http://www.multiupload.com/LX7ZVGLOC2
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Puxxie said:
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Click to expand...
Click to collapse
Sorry about that, i reuploaded the file as well as modified the attatchment.
Use at your own risk, there are 2 flashes inside the zip, one for web and one for Web+mms, some people cant get the MMS to work, works fine for me, but not sure why it doesnt work for others.
Make a nandroid backup first as always and feel free to mod it however you want
You don't need QPST, and it is in fact easier WITHOUT QPST
You don't need Windows Vista or Windows 7 (or windows at all).
Thank you for your contribution for this community.
I posted a thread for full functionality as well, with a different methodology.
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
You don't need QPST, and it is in fact easier WIT
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Click to expand...
Click to collapse
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
qpst wont read my phone any thoughts or links?
i tried everything
You don't need, QPST.
Just open up your phone, then dial ##778 (call).
ALL of the settings you need to edit in QPST are available in your phone's built in program, EPST.
bigslanki said:
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
bigslanki,
No flaming intended. I was being serious when I said thank you for your contribution. All I've done is copied and pasted things from other sources that have worked for me as I've tried them. I should edit it more fully and maintain it better. Thank you for your suggestion.
I haven't used QPST since the days of ##778 on this phone, and I was only suggesting that less tech-savvy people, who may have trouble getting QPST working just right in Windows, might have an easier time without it.
All is well. Thank you, seriously, for your contribution.
What is the newest/easiest way?
Looks like alot of advancements have been made in the last 3 or 4 months to make the process easier. Is this thread still the best way to get an eris setup on Cricket with full functionality?
Please help out a noob! I've read so many posts, tried so may methods...I think I am SOOOOO close! But I just can't get the web/mms working.
Thanks!
Will this work for HTC Incredible? I seem to be stuck. *228 calls cricket but a voice says they can not program my phone. I have tried nearly ALL the prl files for cricket available on the link. I can call 611 from it also and speak to a csr but that was little/no help..
Please change this to hero thanks
Web on Eris
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
EthicsDesign said:
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
Click to expand...
Click to collapse
If you have a 3g indicator in the notification bar of your phone (as long as you have Mobile Network turned on - hold the power button, and turn it on, if it's not on already), then you're ready to flash the web/mms flash.
Flashing the web/mms flash or ANY kind of flash from Recovery will NOT affect your talk/text abilities whatsoever. It can only enhance the ability of your phone to do things.
I recommend flashing the Cricket v10 flash from token419's thread here, then using APN Backup & Restore to backup your APNs, modify them, then Restore them to make MMS work perfectly:
http://forum.xda-developers.com/showthread.php?t=730289
Let me know where you get stuck, if you get stuck.
Here's what I did, exactly, to get my ex-gf's working 100%
http://forum.xda-developers.com/showpost.php?p=7665352&postcount=135
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
EthicsDesign said:
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
Click to expand...
Click to collapse
That's not true.
But if you go into the store, and ask for your Android phone to be on Cricket, then yes, you'll have to pay for the plan.
Otherwise, unless they're keeping inventory of customer provided equipment (which they never have before), you're fine.
In their notes they just have 'customer-provided equipment' listed, not HTC Droid Eris.
I wouldn't worry about it. My ex-gf has this going on, so we'll see. Sprint is $69.99 for a better/faster/more reliable network, so if Cricket does this, they might lose out to that, unless people really use the unlimited minutes.
Quick question. I am very new to the android unlocking scene but I have done a good amount of research. Step 1 of this guide shows us how to get text and talk working for cricket (and I'm assuming Metro as long as you load the Metro prl). What I want to know is Step 1 EXACTLY the same as getting MetroFlashed minus adding the esn to Metro's db?
The reason I want to know is because I got my phone MetroFlashed and set up data and mms. The next day I did a hard reset. Contrary to others beliefs doing so put me back on Verizon so I brought it back to be flashed again. Now I'm reading this and would like to know if Step 1 is all I need to do to get back on Metro in the event I need to do another hard reset for whatever reason.
Thank you to m4f1050 for pointing me in the right direction!
This is used to change the PPP user ID so that you can switch to another CDMA provider and use their data plans. Normally if you try to change the User ID to (ESN)@new.carrier.com, the phone will revert back to (ESN)@mdata.vmobl.com upon reboot. If you follow these directions, the settings should stick. This was created for the Optimus V but it will most likely work for other phone with the same issue.
Warning: Do not do this unless you understand the consequences. You will lose access to your VM data plan by doing this. You will need to change your User ID back if you want to use VM again.
Download QXDM and QPST.
Install both QPST and QXDM.
Follow the steps found here to get your MSL code and to configure QPST. You can stop at step 8 of "Update your PRL". As a last resort, if the previous method fails, you can get your MSL code by following this.
Download these rar'ed text files: Qualcomm.rar
Unrar them and place them inside C:\Users\Public\Documents\Qualcomm\QXDM\Vendor\Qualcomm\
Overwriting the original files. If they fail to overwrite the files, right click Diag.txt, select properties and uncheck "read only". Do the same for NVItem,txt.
Open QXDM Professional
If your phone isn't already recognized and connected, Go to Options > Communications and select the appropriate Target Port. This will be the port you configured in step 2.
Once connected, under view, select NV Browser.
Scroll all the way down to item 39939 and select it. The lower half of the window should show a list of values.
Hit read. Take note of the values in case you want to reverse what we are doing, and then turn them all to zero under "input". You edit them by double clicking them
Hit Write.
Next, without touching anything else, open QPST Service Programming.
Select Read, enter your MSL from step 2. An error will pop up, but ignore it.
Edit M.IP and PPP Config - AN entries to your desire.
Hit Write and Enjoy!
After you do this once, you can change your User ID by starting with step 12. You do not need QXDM any more.
doesn't seem to work for me. 39939 is empty
mmarz said:
This is used to change the PPP user ID so that you can switch to another CDMA provider and use their data plans.
Click to expand...
Click to collapse
I plan to use a regular Evdo dumb-phone (not an Android) as a donor. Is it even possible?
got it to change but still no internet on VM. I am converting sprint Optmimus s to virgin mobile .. but I haven't been able to get data to work. I am now able to change the MIP settings but the first profile always gets enable and the 3 disable. I can change the 1profile to anything now with tutorial, just not able to disable it.
prominator said:
got it to change
Click to expand...
Click to collapse
How did you solved the problem of 39939 being empty?
followed the instruction but on my winxp machine.
prominator said:
followed the instruction but on my winxp machine.
Click to expand...
Click to collapse
How come? Can you please explain?
you know how you have to put some files in C:\Users\Public\Documents\Qualcomm\QXDM\Vendor\Qua lcomm\??
well my windows 7 machine didnt have that directory. so I couldnt do it.
on my windows xp it had it.
help nv edit
mmarz said:
Thank you to m4f1050 for pointing me in the right direction!
This is used to change the PPP user ID so that you can switch to another CDMA provider and use their data plans. Normally if you try to change the User ID to (ESN)@new.carrier.com, the phone will revert back to (ESN)@mdata.vmobl.com upon reboot. If you follow these directions, the settings should stick. This was created for the Optimus V but it will most likely work for other phone with the same issue.
Warning: Do not do this unless you understand the consequences. You will lose access to your VM data plan by doing this. You will need to change your User ID back if you want to use VM again.
Download QXDM and QPST.
Install both QPST and QXDM.
Follow the steps found here to get your MSL code and to configure QPST. You can stop at step 8 of "Update your PRL". As a last resort, if the previous method fails, you can get your MSL code by following this.
Download these rar'ed text files: Qualcomm.rar
Unrar them and place them inside C:\Users\Public\Documents\Qualcomm\QXDM\Vendor\Qualcomm\
Overwriting the original files. If they fail to overwrite the files, right click Diag.txt, select properties and uncheck "read only". Do the same for NVItem,txt.
Open QXDM Professional
If your phone isn't already recognized and connected, Go to Options > Communications and select the appropriate Target Port. This will be the port you configured in step 2.
Once connected, under view, select NV Browser.
Scroll all the way down to item 39939 and select it. The lower half of the window should show a list of values.
Hit read. Take note of the values in case you want to reverse what we are doing, and then turn them all to zero under "input". You edit them by double clicking them
Hit Write.
Next, without touching anything else, open QPST Service Programming.
Select Read, enter your MSL from step 2. An error will pop up, but ignore it.
Edit M.IP and PPP Config - AN entries to your desire.
Hit Write and Enjoy!
After you do this once, you can change your User ID by starting with step 12. You do not need QXDM any more.
Click to expand...
Click to collapse
what's item 39939 called in NV Browser not all phones have item 33939 thanks for any help
Anybody still have these files? Qualcomm.rar mediafire link is dead. Thanks
bump
links dead please revive thread
bump again. mmarz has had no activity since 2011 on both here and androidcental. Someone with these files please chime in.
Just ran across this on another forum... anybody tried this, I don't have time right now, might look at it later, the menu comes up but I didn't have time to get any further than that.
Wifi Hotspot Hack 4 No Root And Infrastructure Tether 4 Root Updated 7/17 Incredible2
WiFi Hotspot Hack
Steps:
1) Dial ##778#, SEND.
2) EPST dialog comes up. Select 'Edit Mode'. Enter SPC (000000), hit OK.
3) Scroll to down to 'Security', select it. Change 'S.IP DUN User name just take out dun. Of the email address.
4) Hit back arrow to go back and go/select 'M.IP Default Profile' just take out dun. Of the email address.
5) Hit menu button, and 'Commit Modifications', phone will save changes and reboot.
If Your Rooted And No Longer Needing Hack.
(Cygenmod Doesnt Work With This Your Must Do This Before)
Steps:
1) Dial ##778#, SEND.
2) EPST dialog comes up. Select 'Edit Mode'. Enter SPC (000000), hit OK.
3) Scroll to down to 'Security', select it. Change 'S.IP DUN put dun. back in front of vzw.
4) Hit back arrow to go back and go/select 'M.IP Default Profile' change only the DUN NAI back to .
5) Hit menu button, and 'Commit Modifications', phone will save changes and reboot.
In no way did i write this. I stumbled onto this here http://forum.xda-developers.com/showthread.php?t=1794956 (many thanks AlpineMan btw) and have seen the question here in the Evo 3d section a few times and thought it was worth a share for those running a Sprint ROM and VM or Boost service. I did step one and it worked like a charm. And to me any fix is a good fix. Especially in the land of root phones.
Method 1 - (the real fix, but requires a rooted phone):
***UPDATE***
I've confirmed that this method works on Jellybean ( 4.2.2). Tested and working on VM Evo 3d
1a) Download this working Sprint APN xml file: https://www.box.com/s/40x5ac2c6u0ckzfz59ig (click on download button at the top)
OR
1b) For Boost, download this xml file: https://www.box.com/s/o9folfrq00ee9p2qj5pv (click on download button at the top)
OR
1c) For Virgin Mobile, download this xml file: https://www.box.com/s/9itl21drpp84enqeszc9 (click on download button at the top)
2) Download and install "APN Backup & Restore" from the Google Play Store to your phone: https://play.google.com/store/apps/d...pRestore&hl=en
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
Method 2 - (work around, doesn't require rooted phone)
1) Download and install Go SMS Pro to your phone from the Google Play Store.
2) Launch Go SMS Pro and skip through the intro message screens.
3) Skip the Go Chat Service offer unless you really want that.
4) Press Menu button on your GS3.
5) Choose Settings.
6) Scroll down the menu and choose Set default SMS program.
7) Press each entry in the list and put a check mark on "Use by default for this action" then choose Go SMS Pro. When both are done, press the back button on your phone.
8) Up on top, press "Advanced"
9) Scroll down the list and press "MMS Settings"
10) Scroll down the list and put a check mark on "Fill APN configuration manually"
11) Press "MMSC".
12a) Type in "http://mms.sprintpcs.com" - do not include the double quotes. Press OK button.
OR
12b) Type in "http://mm.myboostmobile.com" for Boost
OR
12c) Type in "http://mmsc.vmobl.com:8088/mms?" for Virgin Mobile
13) Press "MMS PROXY".
14) Type in "68.28.31.7" (Sprint & Boost) OR "205.239.233.136" (Virgin Mobile) - do not include the double quotes. Press OK button.
15) Press "MMS PORT".
16) Type in "80" (Sprint & Boost) OR "81" (Virgin Mobile) - do not include the double quotes. Press OK button.
17) Press back button on phone twice.
18) Send/receive a few SMS/MMS messages to test.
19) Done.
Works for Kit KAt (4.4) too
Hey,
Method 1 works for Kit Kat 4.4.1. I'm on a VM evo 3d with the CyanogenMod 11.0 VILLUMINATI Rom
The only difference is the app has to be moved to the /system/priv-app folder for it to be able to acquire the correct permissions.
I also did step 3) with titanium backup, not sure if it helped or not.
Cheers.
Anybody know how to add the 4g only setting
https://forum.xda-developers.com/me...te-4g-mode-t3828656/post77318151#post77318151
try this...
Unfortunately, it doesn't work for me. 4g only is not unlocked. Has anyone else's ideas
MasterLu2k said:
Unfortunately, it doesn't work for me. 4g only is not unlocked. Has anyone else's ideas
Click to expand...
Click to collapse
Hello,
yes, now we finally found a solution.
Do exactly as described:
Download Settings Database Editor from playstore and open it
Look for hw_networkmode_preference and edit the stock value "9,6,2,1" to "11"
Restart the device
Open Settings Database Editor
Click on + Add new setting at the top
Type "hw_add_4g_only" (without " ") and press save changes
Type in your country code, example "502" Malaysia or "262" Germany. Press save changes
Type "hw_add_4g_only" (without " ") and press save changes (YES, REPEAT STEP 6)
Type in your country code, example "502" Malaysia or "262" for Germany and press save changes (YES, REPEAT STEP 7)
Restart the device and VOILA!
Now you have access to ALL network modes. Select "LTE" or "4G" for 4G only functionality.
Like this, you have stable Internet nearly where ever you go, without dropping back to overcrowded 2G/3G Networks.
Best,
Stefan
p.s.: thanks to ronald_loulan for original solution!
will this work when travelling to other countries?
It's work
Thank you very much
Edit: got it working 4g only now.
One question though, the UK country code is 234 and 235.
Do I add both numbers and just separate them with a comma?
Thanks.
Mate 20 pro 4g only
Xergi said:
Hello,
yes, now we finally found a solution.
Do exactly as described:
Download Settings Database Editor from playstore and open it
Look for hw_networkmode_preference and edit the stock value "9,6,2,1" to "11"
Restart the device
Open Settings Database Editor
Click on + Add new setting at the top
Type "hw_add_4g_only" (without " ") and press save changes
Type in your country code, example "502" Malaysia or "262" Germany. Press save changes
Type "hw_add_4g_only" (without " ") and press save changes (YES, REPEAT STEP 6)
Type in your country code, example "502" Malaysia or "262" for Germany and press save changes (YES, REPEAT STEP 7)
Restart the device and VOILA!
Now you have access to ALL network modes. Select "LTE" or "4G" for 4G only functionality.
Like this, you have stable Internet nearly where ever you go, without dropping back to overcrowded 2G/3G Networks.
Best,
Stefan
p.s.: thanks to ronald_loulan for original solution!
Click to expand...
Click to collapse
Here is what work for me.
If you already had a hauwei phone and used "setedit" and you now upgraded to you Mate 20 pro with using the "phone clone" app.
You will notice the "setedit" app won't be copied over. So head on over to "play store" and download it.
Follow the steps give in this thread to enter all the setting on the "setedit" app.
Restart your device. You will see it didn't work. No problem. Just uninstall the "setedit" app and restart your device.
Now go to your mobile network setting and you will see you will have all the setting for networks including 4g only.
you can try this at teknokia site