Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, blah, blah, blah, this is dangerous,
* but also recoverable in case something goes wrong, so
* don't be stupid and you'll be good.
*/
Woah, woah, woah. Custom download mode? What are you smoking?
Nothing actually, and yes, this is a custom download mode -- your eyes did not deceive you.
That's kinda cool I guess, but what can it do that mine can't?
Well, I didn't go all crazy with messing with things yet, but at the moment, it has the following extra features over the stock download mode:
- adbd insecure (thanks, @Chainfire) (and yes, I did just say you can now use adb in Download Mode)
- Changed all instances of light blue and bright green to semi-dark purple (it looks better that way in my opinion)
Sounds pretty sweet. Where can I download it from?
You can find the current version here and a listing of all of the versions here.
Pretty nice! How do I install it though?
Please note that this is only for Verizon LG G3 owners that are on KitKat (or use the KitKat bootloader, at least, because this uses BUMP!) and you must be rooted to install it
First off, please note that installing a custom download mode is nowhere near as complicated/dangerous as it sounds. When you are ready, either connect your device to your computer via adb and open an adb shell, or use a terminal emulator app to run the following commands:
Code:
su
dd if="/dev/block/platform/msm_sdcc.1/by-name/laf" of="/sdcard/laf.img"
We just backed up your current download mode (laf) image, so upload that somewhere and keep it safe. Now we are going to install PurpleDL!
If you downloaded the image to your computer, either adb push it to your phone or just drag-and-drop it on to your phone's internal sdcard (there's not actually an sdcard inside your phone, it's just called that. It's your internal storage), and please note where you put it because you will need that for this next step.
Now, in that same adb shell or terminal window, run these commands:
(replacing XXXX.img with the location and name of the image you downloaded)
Code:
dd if="/sdcard/XXXX.img" of="/dev/block/platform/msm_sdcc.1/by-name/laf"
Ta-da! It's installed! That's all there is to it! You can now boot into PurpleDL mode or continue to carry on with your day.
Sweet, how do I use it?
I'll leave you with this (video not by me)
It sucks and I hate you. How do I uninstall this garbage?
Remember that backup I told you to make earlier, in the installation process? Well, you put that on your phone's internal storage and you flash it to your device with:
(assuming the backup is named "laf.img" and is in "/sdcard/")
Code:
dd if="/sdcard/laf.img" of="/dev/block/platform/msm_sdcc.1/by-name/laf"
FAQ
- To be filled out
Changelog
- v1
--- Initial version
Cool stuff to do with PurpleDL
- Custom Error Message (see the last photo here: https://twitter.com/r3pwn/status/587713686401232897)
--- This one is actually kinda fun. It's a "fake" error screen, so nothing is actually wrong with your device when you use this. If you want to mess around with it, read on.
--- So, first off, put your device in "PurpleDL" mode and open an adb shell.
--- Now, type the following:
Code:
wallpaper -framework
1
text
your_message_here
--- When you type your custom message, separate words using hyphens (-) or underscores (_), otherwise, it will not work. This is not something I can fix, as this little utility was made by LG.
Wow, amazing!
There's not lot to it features-wise, but it still sounds awesome!
So what would I use download mode for? Just wondering.
bb12489 said:
So what would I use download mode for? Just wondering.
Click to expand...
Click to collapse
You can use it to go back to stock, flash firmwares, etc and also, there were many many many references to potential bootloader unlock scenarios. However, investigating any of them resulted in a dead end, although I'm sure one of them would work if I tried hard enough.
I have been contemplating adding a new way to flash single partitions and provide a shell scripts for Linux/osx and a batch file for Windows. Before I actually start working on it, is this anything anyone would want?
r3pwn said:
I have been contemplating adding a new way to flash single partitions and provide a shell scripts for Linux/osx and a batch file for Windows. Before I actually start working on it, is this anything anyone would want?
Click to expand...
Click to collapse
I'm interested in something exactly like that if you find the time. Thanks for the custom DL mode.
roirraW "edor" ehT said:
I'm interested in something exactly like that if you find the time. Thanks for the custom DL mode.
Click to expand...
Click to collapse
Okay, it shouldn't be too hard. It'll basically just be a tool to dump/flash partitions and be "wrapped around" adb.
r3pwn said:
Okay, it shouldn't be too hard. It'll basically just be a tool to dump/flash partitions and be "wrapped around" adb.
Click to expand...
Click to collapse
Thanks!
Download Mode
If my download mode is not being recognized by my PC. Will entering into this custom download mode fix that?
Also Flash Tool, Verizon SU and pretty much all tools don't recognize.
calseen said:
If my download mode is not being recognized by my PC. Will entering into this custom download mode fix that?
Also Flash Tool, Verizon SU and pretty much all tools don't recognize.
Click to expand...
Click to collapse
I doubt it, but only trying will tell. Sounds like a driver or Windows problem. Have you tried rebooting the PC after installing the latest Verizon LG drivers with the phone not plugged into it? Have you verified that in Device Manager it doesn't list the phone under the Modem section? It can take up to 10 minutes for Windows the load the driver you had installed, the first time you connect a different device to a different USB 2.0 port, and USB 2.0 is recommended over USB 3.0, and preferably a port that comes directly off the motherboard, and not through a hub.
If the phone isn't listed in the Modem section of Windows' Device Manager, no software looking for Download mode will be able to recognize it.
Related
Today I tried to flash the CyanogenMod 9 Nightly 06-30-12, coming from Build 35 of AOKP and after factory resetting and clearing Dalvik I went to install the zip and while flashing it I got a build-prop related error!
All of my NANDROIDS gave me a data error when flashing and now I am pretty f'd! I /really/ need to fix this ASAP but have no idea how.
-Samsung Galaxy Tab 10.1 Wifi-
-CWM 4-
On a second note, does anywhere know where I can get my screen replaced for cheap? I dropped my tab a few months back and the screen got MAJOR cracked, though it still does technically work (I still use the screen, it works but it's cracked is all...) and after calling Samsung and waiting for over 1 and a half hours they told me they wanted $150 to fix it, which if I recall is about half of what I payed for it anyway...
To be honest, I'd be lying if I said I was happy with Samsung over all.
I mean, bad customer support, the proprietary connection cable, and lack of official updates (along with the ugly TouchWiz that I'm not sure /who/ likes ) don't make me that happy...
Anyway, can anyone help me please?
Thanks in advance!
Update your recovery: http://droidbasement.com/db-blog/?p=2655
If you have a GT-P7510 (p4wifi), in this post are flashable zips (with your current recovery) of CWM and TWRP, in case you prefer this method: http://forum.xda-developers.com/showpost.php?p=28051448&postcount=29
After that, flash your ROM like always.
Yeah, thanks, were it so easy. I fired up ODIN multiple times, no matter what, unsuccessful. Like always, my computer would not recognize my tablet. Yes, I have the bloody Samsung drivers, yes I've tried reinstalling them (several times in the last few months), yes I've tried using different USB ports! And what? Nothing. Nothing at all. For the last few months I have not been able to transfer movies/music to my tablet via file transfer and I can't even get the stupid odin download thing to work. To be honest, I really am pissed off with this broken pile of trash. Would trade it in for a similar tablet any time.
Did you try any of the flashable zips for a new recovery?
About the USB, it sounds like a different problem, but for the file transfers, are you sure you have MTP selected? (answer #5 --> http://forum.xda-developers.com/showthread.php?t=1642009 )
If you haven't tried it yet, you could use a different computer, another OS (some Linux distro and check that adb works), change the USB cable.
I can't use a flashable zip since I can't copy files onto the tablet >.>
Also, yes, for file transfers I /do/ have MTP selected always and it doesn't work eitherway.
Essentially, I am stuck with a $300+ ugly and broken thing that I can only use as a paperweight for the huge mess I call my desk. Yay.
>Rage sidenote; Samsung, go take the money I payed for **** and shove it.
And I guess you don't have your old ROM (AOKP build 35) in your tab.
Try with adb (in recovery), but if you can't get a working USB connection (using other computers or OS), maybe there's something physically wrong with your tablet.
No, I don't. I'm stupid enough to delete the ROM zip after flashing it to save space on the tablet...
How do I do this ADB thing? I've heard of it before alot but never used it or looked into it...
Read this: for windows -> http://forum.xda-developers.com/showthread.php?t=1387527 , for Ubuntu -> http://forum.xda-developers.com/showthread.php?t=921169
After everything is installed, boot your tablet into recovery and try running in your command line application (CMD for windows):
adb devices
If it shows that a device (and ID number and the actual state, e.g. recovery) is connected, your golden!
If you have another android device, try it too, to be sure that is working.
To transfer a file the command is
adb push /path/to/file /path/in/tablet
In windows I guess is something like this:
adb push C:\path\to\file /path/in/tablet
so I'd do something like
adb push C:\ADB\CWM-5.5.0.4-p4wifi.zip mnt/sdcard/ ?
Im dling the ADB files right now
adb push C:\ADB\CWM-5.5.0.4-p4wifi.zip /mnt/sdcard/
You need the slash at the star and end of the path of the tablet.
While installing PdaNet it failed, said it couldnt connect through to the device or w/e
Also,I don't recall having ADB on when I had the tablet. I might've but I don't think I kept debugging on for the general time...
This is so frustrating >.>
I'm not sure about that error in PdaNet, I can help you with adb but I don't use Windows, so there's things I can't test.
If you didn't select ADB debugging in your ROM it doesn't matter, you're doing this from recovery.
BTW, do you have other android device?
adb seems to be working and copying, but I can't find the file in Recovery while doing choose a zip to apply!
Yes, I have an LG Optimus V on Virgin Mobile running tdm's AMAZING Quattrimus Alpha 10 on Ice Cream Sandwich/ Android 4.0.4
this is what I get
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb devices
List of devices attached
43C800340009517 recovery
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb push C:\CWM-5.5.0.4-p4wifi.zip
43C800340009517\sdcard\download
1328 KB/s (4147569 bytes in 3.048s)
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>
If you connect your phone and execute
adb devices
What's the output?
If you do the same with your tablet, what's the output?
with the tablet it's
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb devices
List of devices attached
43C800340009517 recovery
with my phone it doesn't wanna show up in Recovery or not.... Hmm.
Well, it shows fine, then you should be able to transfer the files
First, in your recovery, go through the steps to install some zip file, but just go as far as selecting the directory, then go back
Now in your PC try running something like this, change your path in windows:
adb push C:\CWM-5.5.0.4-p4wifi.zip /sdcard/
The in your recovery, select install and should show there. The thing is that most likely the sdcard wasn't mounted in your tab
Edit, to mount your sdcard in recovery do: mounts and storage > mount /sdcard > Go back
The do the transfer in your PC.
Hmm
While I was holding it to my gut, pushing the end of the cable into my stomach (It was the only way to get it to be recognized) I fooled around and went into download mode, hoping that on the contrary I could do that, turn it off, and when I went back into Recovery it would be there when it finally said the cable WAS connected and then I rushed to open Odin and wrote it through, and it frickin' wrote CWM v5 right on and it worked, I'll be damned!
Maple, I can not thank you enough for helping me with this, I am in great debt.
You're welcome, I'm glad it worked. Knowing how to use adb is really useful. And now you know that something is wrong with your cable.
Or in the connector pins or w/e of the tablet... The cable works fine for charging though....
You are my savior, bro.
Howdy folks,
Yesterday, I was the proud owner of a sleek little TCT.Alcatel OneTouch A554C, formally know as a Virgin Mobile Venture running Android version 2.3.5.
It was successfully and surprisingly easy to root by utilizing 2 cool little apps, Ministro and Poot-Debug.
After root, I subsequently downloaded some root tools (eg., Titanium Backup Pro, Superuser Elite, System App Uninstaller).
That was last week.
Yesterday, I got a bit cocky. I needed to clear up some internal memory so I used "System App Uninstaller" to uninstall a few apps. If I remember correctly, the apps were as follows: Google Maps, Google Maps Street View, Calculator, Digital Clock, Setup Wizard, Android Live Wallpaper, Live Wallpaper Picker, Magic Smoke Wallpaper, Music Visualization Wallpaper, and the TouchPal Keyboard French and Spanish Language Packs.
So far so good, right? However, I believe I may have snarfed-up when I uninstalled the Setup Wizard. But I'll get to that in a minute.
Now with Titanium Backup, I moved some apps to the sd card. Included was the stock launcher, Smart Launcher Pro, SPB Shell, AVG Anti-Virus, and Superuser Elite. Then I rebooted through Titanium Backup and I haven't viewed any pornographic material since!
After reboot, the phone got stuck on the final boot animation frame. I panicked, pulled the battery, booted into recovery then rebooted a 2nd time.
This time it booted to the pull-down lock screen. I unlocked and seen:
"Sorry! The application com.android.setup wizard has stopped unexpectedly. Please try again." Along with a "Force Close" option. I forced closed and the screen went black with the exception of the status bar. The phone is still on but otherwise...nada.
When I press the power button, same thing happens: pull-down lock screen, screen goes black. Or sometimes, it will turn on and boot loop.
Major panic time!!! I booted into recovery again and performed a factory reset to no avail.
Another clue to note: I can connect & access the sd card via usb to desktop.
Also, I did have the good sense to backup all apps, system and user, through ES File Explorer and stored them both on sd card and in the cloud via Yandex Disk prior to this bricking fiasco. Now, what do I do with them? I now realize it was possibly a mistake moving all 3 launchers to the sd card. How do I get the stock launcher back to the phone?
Or, should I:
1- Attempt a base rom reinstall or
2- Attempt a custom rom install or
3- Use it solely as a time piece/mass storage device or
4- Throw it very hard and very ******* far away from me!?
I realize this is an obscure little cheap phone but it's the only one I have. Any valid feedback would be greatly appreciated.
You can go to the Play Store on any browser and choose a launcher to install. Or if you have USB Debugging on, you can side load an launcher apk. Or if you install a custom recovery, you can install another rom or sideload an apk there. Or you can flash the original firmware via SP Flash Tool.
Lots of options and none of them need to be throwing it against the wall.
es0tericcha0s said:
You can go to the Play Store on any browser and choose a launcher to install. Or if you have USB Debugging on, you can side load an launcher apk. Or if you install a custom recovery, you can install another rom or sideload an apk there. Or you can flash the original firmware via SP Flash Tool.
Lots of options and none of them need to be throwing it against the wall.
Click to expand...
Click to collapse
Hmmm...Ok, thanks. Dig your username, by the way.
First thing is, install from play store would be possible if I had data service or if I was able to enable wi-fi. I only have calling & texting service on this phone and as for wi-fi, I can't enable it due to the problem of not being able to access the settings menu. All I have when it does boot, and it only fully boots when it is connected to a PC, is the pull-down lockscreen displaying time, date, status bar and the original wallpaper. Pull it down and the screen goes black with status bar still displayed along with time & battery level.
Secondly, USB debugging was enabled prior to all of this but I panicked & performed a factory reset. Don't think it's still on.
And lastly, is installing either a custom recovery, (which, to be frank, I'm just not that savvy) another rom or flashing original firmware even possible without a PC? Because I only have access to a PC without administrative privileges so therefore...no installing exe's without a password. Maybe this program lab will allow me, quite possibly not.
Hell, would I even still have root after a reset/data wipe?
Thanks, anyway, Esoteric Chaos
Off subject: The Joker was an Agent of Chaos. Loved Heath Ledger as The Joker.
Silver Rivers said:
Hmmm...Ok, thanks. Dig your username, by the way.
First thing is, install from play store would be possible if I had data service or if I was able to enable wi-fi. I only have calling & texting service on this phone and as for wi-fi, I can't enable it due to the problem of not being able to access the settings menu. All I have when it does boot, and it only fully boots when it is connected to a PC, is the pull-down lockscreen displaying time, date, status bar and the original wallpaper. Pull it down and the screen goes black with status bar still displayed along with time & battery level.
Secondly, USB debugging was enabled prior to all of this but I panicked & performed a factory reset. Don't think it's still on.
And lastly, is installing either a custom recovery, (which, to be frank, I'm just not that savvy) another rom or flashing original firmware even possible without a PC? Because I only have access to a PC without administrative privileges so therefore...no installing exe's without a password. Maybe this program lab will allow me, quite possibly not.
Hell, would I even still have root after a reset/data wipe?
Thanks, anyway, Esoteric Chaos
Off subject: The Joker was an Agent of Chaos. Loved Heath Ledger as The Joker.
Click to expand...
Click to collapse
You can go to ANY browser - even on the PC and log into your account and hit Install and it will send the command to your phone to install it. Pretty nifty. But you did say you factory reset, so that isn't actually going to work. Sorry.
The rest of the stuff would require a PC, though I don't think admin rights are needed, so there's that...
If you don't have your phone logged into Google or USB Debugging enabled, you're kind of stuck without a PC.
es0tericcha0s said:
You can go to ANY browser - even on the PC and log into your account and hit Install and it will send the command to your phone to install it. Pretty nifty. But you did say you factory reset, so that isn't actually going to work. Sorry.
The rest of the stuff would require a PC, though I don't think admin rights are needed, so there's that...
If you don't have your phone logged into Google or USB Debugging enabled, you're kind of stuck without a PC.
Click to expand...
Click to collapse
Well, on these PCs it certainly does. I thought I was on track yesterday and tried to install a copy of Odin that I found. Can't install without a frigging admin pass.
Someone else just suggested I try a stock rom flash. Might as well, right? Happen to know where I could find a good reliable copy? That also happens to be free?
Not sure why you were trying to use Odin for a non Samsung phone...?
The stock rom flash would only be possible via PC or if you had a custom recovery installed.
Here's what you would need to do for the Virgin Mobile Venture:
Download CWM: http://www.sendspace.com/file/4gt04i
Download adb/fastboot: http://forum.xda-developers.com/showthread.php?t=2317790
Download rom: http://goo.im/devs/LeslieAnn/Venture/Stock_Venture.zip - Put on SD card.
Drivers: http://pdanet.co/bin/PdaNetA4150.exe (this program is for USB tethering and installs the adb drivers for your phone as well as many others)
The CWM img will need to be in the folder you unzipped for adb/fastboot. You'll need to boot to fastboot mode by powering on with while holding Volume Up.
Open a terminal prompt and change directories to your adb/fastboot folder. Then run this command:
fastboot flash recovery nameofrecovery.img - fill in the nameofrecovery with whatever the CWM file name is.
(if this doesn't work - make sure that your PC is reading the phone correctly by using the command: fastboot devices . If you don't get anything back, make sure you check the Device Manager for errors. If you have them, try reinstalling the drivers and rebooting the PC)
Then pop the battery out and then reboot to recovery via powering on while holding volume down. Once there, you should be able to do a factory reset and then install the stock rom zip. The volume keys should scroll through selections and the Enter key for accept, or Power if that doesn't work. Not really sure about this particular phone.)
Actually, you might just be able to use adb to install a launcher apk once you have CWM installed. Might be a little easier.
launcher apk must be in adb folder then while in CWM:
adb install nameoflauncher.apk
Note: You can rename zips and apks to be easier to type the commands.
es0tericcha0s said:
Not sure why you were trying to use Odin for a non Samsung phone...?
Click to expand...
Click to collapse
Yeah, me either. I was all over the place yesterday grasping at anything. So Odin is only for Samsungs, huh? Guess I can delete the exe file from my sd.
Right then. I'm about to proceed with your advice. Cross your fingers and toes.
Thanks mate!
The CWM img will need to be in the folder you unzipped for adb/fastboot.
Click to expand...
Click to collapse
and
launcher apk must be in adb folder then while in CWM
Click to expand...
Click to collapse
Wait, what? Please excuse my ignorance, but am I missing something. ADB didn't come in a zip. It's an installer. I think you may have to dumb this down a bit more, mate.
Silver Rivers said:
and
Wait, what? Please excuse my ignorance, but am I missing something. ADB didn't come in a zip. It's an installer. I think you may have to dumb this down a bit more, mate.
Click to expand...
Click to collapse
Sorry, I meant in the folder that it extracts the files too.
es0tericcha0s said:
Sorry, I meant in the folder that it extracts the files too.
Click to expand...
Click to collapse
Right, got it.
Silver Rivers said:
Right, got it.
Click to expand...
Click to collapse
If you can't run the exe file, then let me know, and I'll just upload a zip / folder with the necessary files. You do not need admin access to run the adb commands.
es0tericcha0s said:
If you can't run the exe file, then let me know, and I'll just upload a zip / folder with the necessary files. You do not need admin access to run the adb commands.
Click to expand...
Click to collapse
That would be really cool, actually. But check this out:
I talked someone into allowing me to utilize his laptop. I installed ADB, moved the Launcher APK to the folder suggested, ran the commands but the command prompter responded with "waiting for device" and progressed no further. Could it be a driver issue? I was under the impression that if the PC recognizes your device (which it did) then a new driver install was not necessary.
Dude was real cool about it even though I ran his battery down quite significantly and didn't even accomplish anything.
So, if I had the ADB files then I could just copy them to...say the PC desktop and run the command prompter from there? If so, then yes please upload and I'll just try it that route rather than rely on someone's personal PC. Know what i mean?
I do appreciate all of this. I'm getting quite the education here. If you ever get married, let me know and I'll come and dance as my favor to you.:good:
Peace...I'll return tomorrow.
What mode were you in when trying to install? The laptop had the most up to date drivers? You checked the Device Manager to make sure there was no yellow exclamation mark next to the phone? It's not unheard of for the PC to recognize in one mode, but not load the correct drivers in another, as there are different drivers for the phone depending on if it is booted, in recovery, or download mode or whatever they call it for that phone. Just make sure to get the PDAnet drivers installed and reboot. That should do the trick.
Everything else you should need will be in here:
https://dl.dropboxusercontent.com/u/9903887/adbfastboot.zip
es0tericcha0s said:
What mode were you in when trying to install? The laptop had the most up to date drivers? You checked the Device Manager to make sure there was no yellow exclamation mark next to the phone? It's not unheard of for the PC to recognize in one mode, but not load the correct drivers in another, as there are different drivers for the phone depending on if it is booted, in recovery, or download mode or whatever they call it for that phone. Just make sure to get the PDAnet drivers installed and reboot. That should do the trick.
Everything else you should need will be in here:
https://dl.dropboxusercontent.com/u/9903887/adbfastboot.zip
Click to expand...
Click to collapse
I was in Recovery and I was also attempting to install the just the Launcher versus the entire ROM. And I was also feeling a tad bit rushed, cause dude was right there informing me of his battery status. "Well, it's down to 30%." Then 2 mins later.."Ok, looks like it just fell to 25%."
Haha...so yeah, with him pressuring me, I spaced on checking the device manager. This desktop that I'm on today seems to be cool. Just checked the manager & it informs me that my device is 'working properly'.
Off to give it another bloody joust, mate. Wish me luck...
Can you fully explain how to do this
es0tericcha0s said:
Not sure why you were trying to use Odin for a non Samsung phone...?
The stock rom flash would only be possible via PC or if you had a custom recovery installed.
Here's what you would need to do for the Virgin Mobile Venture:
Download CWM: http://www.sendspace.com/file/4gt04i
Download adb/fastboot: http://forum.xda-developers.com/showthread.php?t=2317790
Download rom: http://goo.im/devs/LeslieAnn/Venture/Stock_Venture.zip - Put on SD card.
Drivers: http://pdanet.co/bin/PdaNetA4150.exe (this program is for USB tethering and installs the adb drivers for your phone as well as many others)
The CWM img will need to be in the folder you unzipped for adb/fastboot. You'll need to boot to fastboot mode by powering on with while holding Volume Up.
Open a terminal prompt and change directories to your adb/fastboot folder. Then run this command:
fastboot flash recovery nameofrecovery.img - fill in the nameofrecovery with whatever the CWM file name is.
(if this doesn't work - make sure that your PC is reading the phone correctly by using the command: fastboot devices . If you don't get anything back, make sure you check the Device Manager for errors. If you have them, try reinstalling the drivers and rebooting the PC)
Then pop the battery out and then reboot to recovery via powering on while holding volume down. Once there, you should be able to do a factory reset and then install the stock rom zip. The volume keys should scroll through selections and the Enter key for accept, or Power if that doesn't work. Not really sure about this particular phone.)
Actually, you might just be able to use adb to install a launcher apk once you have CWM installed. Might be a little easier.
launcher apk must be in adb folder then while in CWM:
adb install nameoflauncher.apk
Note: You can rename zips and apks to be easier to type the commands.
Click to expand...
Click to collapse
I have a old ass iMac desktop that has not been used in 5plus years at all and I'm a mother of 3 with no clue how to do any of this if you can dumb it down for me that would be very help full as well I have no clue where to download any of the needed files please help. My email is [email protected]
Thank you
Intro
This is a guide for people who want to make some modifications to config files, or other files, on System partition but do not want to root their phone or install custom recovery in order to keep OTAs and some apps, which don't play nicely with rooted phones, working. Examples of those config mods could be changing DPI or changing volume levels etc, which you would only do once and forget about it.
While root allows you to do those kinds of changes from within android, this methods would require a PC.
If you are familiar with temporary booting into a custom recovery, skip to step 5.
The usual i am not responsible for any of your actions / bricked phones disclaimer applies.
Prerequisites
- A working adb / fastboot environment. Please use Android SDK, if you installed your adb and fastboot using other tools, things might not work, so please just install SDK, install Google USB Driver from SDK manager, install Platform-Tools from SDK manager (should be installed by default) and then add your sdk platform-tools path to your PATH environment variable to have it available in cmd in every path.
- Unlocked bootloader
- TWRP image for you phone (.img) https://twrp.me/devices/huaweinexus6p.html
Follow the [GUIDE] Unlock/Root/Flash for Nexus 6P for that.
Instructions
Here is an example of modifying DPI. I prefer build.prop method of modifying DPI because using the adb wm density command usually caused some issues for me, but modifying via build.prop didn't.
1 - With you phone ON, connect it to the PC and make sure adb is working by running
Code:
adb devices
and making sure that device is listed
2 - Reboot into bootloader. and make sure fastboot is good to go too. Run commands one at a time:
Code:
adb reboot bootloader
fastboot devices
3 - Place your TWRP image file in some easily accessible folder, for the sake of this example i will use C:\Mods.
4 - Temporary boot into TWRP (we are not flashing it here at all).
Code:
fastboot boot c:\Mods\twrp-2.8.7.0-angler.img
Here is where things may not work. If you don't see your phone boot into TWRP then either your adb / fastboot environment not setup correctly (installed via a tool instead of SDK) or your img file is corrupt.
One thing that works for me when TWRP refuses to boot is to restart cmd and issue the command again this closes and reopens adb/fastboot daemon.
5 - Once TWRP is up on your phone it may display a warning saying "TWRP has detected an unmounted system partition". Swipe to allow modifications at the bottom. This screen may not come up at all.
6 - Go to Mount >>> Tick System >>> Make sure "Only Mount System Read Only" is unticked >>> Press Back button
7 - Back on your PC check if your device is listed
Code:
adb devices
8 - Pull the file you need to modify from system partition to your PC. Please note the direction of the slashes:
Code:
adb pull /system/build.prop c:/Mods
9 - Now you should see build.prop in your c:\Mods folder. Use Notepad++ or something like that to edit the file. Find the line with lcd_density= and change it's value to whatever you need and save the file.
10 - Push the file back to your phone:
Code:
adb push c:/Mods/build.prop /system
11 - Reboot
Code:
adb reboot
12 - Profit.
Hope this will help anyone who is looking to do some mods without installing custom recovery and rooting your phone.
Cheers.
Would this work for adding the tethering bypass line in the build prop?
Yes it will. What's the line again I was looking for it the other day and couldn't find it...
Works are per OP's original post, tested and boosted the headphone volume without a problem.
Headphone path is /system/etc/mixer_paths.xml
So as per OP's example to pull: adb pull /system/etc/mixer_paths.xml c:/Mods
push: adb push c:/Mods/mixer_paths.xml /system/etc
I'm using the OP's "Mods" folder to demonstrate the file path but this may vary on your PC.
Can I use this to push SuperSU / etc to my device without having to permanently flash TWRP?
skrowl said:
Can I use this to push SuperSU / etc to my device without having to permanently flash TWRP?
Click to expand...
Click to collapse
You can certainly push the files to system partition and they will retain there after reboot. So if you know which files have to be pushed for SuperSU then give that a go. It shouldn't break anything.
I haven't tried pushing SuperSU files to system partition before so I can't guarantee that OTAs will work after this. The only way to find out is to try it i guess...
Can you run nandroids?
not sure if it's allowed or not.. but with this can i push hosts file onto the phone as well for ad-blocking...?????
I will say thanks now and try it later. These are the type of tweaks I would like to make to my phone. Do you know if changing the DPI cause any stock applications to show up broken like they do on the Samsung phones?
NCguy said:
Can you run nandroids?
Click to expand...
Click to collapse
Im not sure what you mean?
rohit25 said:
not sure if it's allowed or not.. but with this can i push hosts file onto the phone as well for ad-blocking...?????
Click to expand...
Click to collapse
If it's on the system partition then I yes you can.
locolbd said:
I will say thanks now and try it later. These are the type of tweaks I would like to make to my phone. Do you know if changing the DPI cause any stock applications to show up broken like they do on the Samsung phones?
Click to expand...
Click to collapse
I've never had a problem with changing DPI using this method on a nexus phone if that helps.
denk said:
Im not sure what you mean?
Click to expand...
Click to collapse
Can you run nandroids backups from TWRP by just booting into it?
okay so after i did this i get the following during boot up
"Your device is corrupt. It can't be trusted and may not work properly". Does this mean i will not get Securty Updates any more? I saw i had an update before i performed this however, now i do not see that update notifications any more.
locolbd said:
okay so after i did this i get the following during boot up
"Your device is corrupt. It can't be trusted and may not work properly". Does this mean i will not get Securty Updates any more? I saw i had an update before i performed this however, now i do not see that update notifications any more.
Click to expand...
Click to collapse
I got this too when I flashed MOAB via adb sideload. I'm just wondering if the same warning appears with the adb push method. Also, the file's permissions don't need to be set after adb push?
My main concern is if Android Pay still works with the red triangle warning. Anyone?
FYI Flashing back to stock is no issue for me.
NCguy said:
Can you run nandroids backups from TWRP by just booting into it?
Click to expand...
Click to collapse
I think if you get the latest TWRP which supports decryption of data partition (where all your stuff is) you should be able to back it up.
Edit: backup works on nexus 5 with temporary TWRP boot. Sorry I'm still waiting for my 6p to arrive.
locolbd said:
okay so after i did this i get the following during boot up
"Your device is corrupt. It can't be trusted and may not work properly". Does this mean i will not get Securty Updates any more? I saw i had an update before i performed this however, now i do not see that update notifications any more.
Click to expand...
Click to collapse
Thanks for trying it out! Sometimes OTA notifications take a little while to come up after reboot. But based on the warning Im afraid that they might be disabled now. It looks like it runs some sort of a check on the system partition to verify its legitimacy. So modifying files would be fine on it using this method but looks like adding them won't work.
TWRP just released their recovery with decryption support so you can just follow the standard procedure or just temporary booting into TWRP and rooting from there which works as well.
denk said:
I think if you get the latest TWRP which supports decryption of data partition (where all your stuff is) you should be able to back it up.
Edit: backup works on nexus 5 with temporary TWRP boot. Sorry I'm still waiting for my 6p to arrive.
Click to expand...
Click to collapse
On your Nexus5 I assume you are also unrooted? And have you tried a Nandroid restore, booted TWRP, no root?
NCguy said:
On your Nexus5 I assume you are also unrooted? And have you tried a Nandroid restore, booted TWRP, no root?
Click to expand...
Click to collapse
Just ran a restore to test it for you. Works fine as well.
My N5 is unrooted.
.
denk said:
Just ran a restore to test it for you. Works fine as well.
My N5 is unrooted.
.
Click to expand...
Click to collapse
Thanks a lot for that. I didn't unlock the bootloader. Ugh. Time to start over. To me nandroids alone make it worth the effort.
Long story short... I have a non-rooted SGH-M919 (Samsung Galaxy S4) with a completely broken screen. USB to PC transfer doesn't work, it's set to charge only, Kies doesn't see it...etc.
I have found that it's still on my wifi and on my google play account so I can install apps from the website. Does anybody know any apps I can install that will instantly let me access my files (and transfer them) without needing to do anything on the phone's side? Remote access would be great but I'd settle for file sharing even if only on the local network.
Any other ideas would be great! I need to recover pictures and contacts that aren't on google, or the SD card. New phone doesn't take the SIM.
You're probably not going to like this answer, but I recommend you simply have the screen fixed. If MTP isn't enabled and you can't enable it, and it's not rooted... There's just not much you can do.
NetworkAuditor said:
You're probably not going to like this answer, but I recommend you simply have the screen fixed. If MTP isn't enabled and you can't enable it, and it's not rooted... There's just not much you can do.
Click to expand...
Click to collapse
That's not too helpful... I found a (paid) app that attempts to recover files from the phone's download mode, which I think I could get to. There's gotta be other (free) options out there if download mode has access to files. Also as I said, I'm sure there's some app out there that shares files on the local network. I just need a name if anybody has one.
Thanks for answering still... but I know there's options.
UnknownCloakedMan said:
That's not too helpful... I found a (paid) app that attempts to recover files from the phone's download mode, which I think I could get to. There's gotta be other (free) options out there if download mode has access to files. Also as I said, I'm sure there's some app out there that shares files on the local network. I just need a name if anybody has one.
Thanks for answering still... but I know there's options.
Click to expand...
Click to collapse
Oh! Well if you can get to recovery, you may be able to pull the files off the device or back it up entirely.
Search "adb from recovery" and see if that gets you anywhere. If you *can* use adb, you might be able use adb's "backup" command to back up whatever you have on there.
NetworkAuditor said:
Oh! Well if you can get to recovery, you may be able to pull the files off the device or back it up entirely.
Search "adb from recovery" and see if that gets you anywhere. If you *can* use adb, you might be able use adb's "backup" command to back up whatever you have on there.
Click to expand...
Click to collapse
No custom recovery and no root access so I don't think adb will work for me... will it? I've confirmed USB debugging is off.
UnknownCloakedMan said:
No custom recovery and no root access so I don't think adb will work for me... will it? I've confirmed USB debugging is off.
Click to expand...
Click to collapse
Well, I've never used adb from recovery before, but a quick search makes me think it could be possible. If you're desperate to recover the data, I' m assuming anything is worth a try.
Now most of the time, stock recovery doesn't have adb access, but if you can manage to unlock your phone, you would be able to install CWM recovery and boot to it.
However, this is unlikely, as IMO, the SGS4 is one of the most painful phones to try to unlock, especially when you don't have access to the screen.
soo.. I am trying adb right now. I did...
adb shell
cd /sdcard/DCIM/Camera
ls
and all my pictures are listed! I tried doing a pull at that point and it says device not found... which it clearly is since it's reading the info. Any idea what my next step is? mounting or something? I feel like I'm so close!
EDIT:
BOOM! got it! I read one post online that said "stay out of shell for pull" I reopened my adb window and just did "adb pull /sdcard/DCIM/Camera" and all is recovered now. Thanks and I hope this post helps somebody in the future!
UnknownCloakedMan said:
soo.. I am trying adb right now. I did...
adb shell
cd /sdcard/DCIM/Camera
ls
and all my pictures are listed! I tried doing a pull at that point and it says device not found... which it clearly is since it's reading the info. Any idea what my next step is? mounting or something? I feel like I'm so close!
EDIT:
BOOM! got it! I read one post online that said "stay out of shell for pull" I reopened my adb window and just did "adb pull /sdcard/DCIM/Camera" and all is recovered now. Thanks and I hope this post helps somebody in the future!
Click to expand...
Click to collapse
Glad you got everything resolved! Now for my own curiosity, how did you manage to get adb working?
NetworkAuditor said:
Glad you got everything resolved! Now for my own curiosity, how did you manage to get adb working?
Click to expand...
Click to collapse
Nothing special at all. It only required:
> Phone in download mode, wired to PC with USB cable
> ADB installed on PC
> Samsung USB Drivers
> Open adb command prompt, and run the pull command (after finding the exact directory using adb shell)
None of this is my work and all recognition goes to the awesome developers that made this possible, I will link their guides in here with some minor notes for newbies like me that may had some issues trying to unlock and root the Fire Stick (FS) 4K
DISCLAIMER: BE WARNED THAT YOU HAVE TO OPEN YOUR FIRE STICK AND IT WILL VOID YOUR WARRANTY, THIS IS NOT FOR THE FAINT OF HEART AND NEITHER THE DEVELOPERS OR MYSELF ARE RESPONSIBLE IF YOU BRICK YOUR DEVICE OR VOID YOUR WARRANTY
Ok, now let's begin:
UPDATE: Per Sus_i, this makes perfect sense:
"Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen)."
First very important, I wish I would have known this before but make sure you have a Laptop and a Monitor to Connect the FS to, so basically the USB Power cable from the FS connect it to your laptop and connect the HDMI portion to a monitor or TV
I also strongly recommend to have your FS deregistered before continuing as this will prevent your FS from automatically updating after rooting
In order to unlock the bootloader follow "THIS GUIDE"
I made a quick video on how to open your device and how to Short it using Aluminum Foil:
https://www.youtube.com/watch?v=h4I6ifBLWJ4
Process is pretty self explanitory, make a USB ISO from the image provided on that thread, boot into it and open terminal, make sure you put the file he provides on a RW location, my mistake was that I put it inside a RO folder and it would not load the script, so I mounted the kamakiri-mantis-v1.2.zip unto the /mnt directory of the usb and I was able to run the script successfully, make sure to run the commands quickly as the first time that I it finished the ./bootrom-step.sh script and I left it sitting for 10 minutes to grab a bite, I couldn't run the second script and had to start all over. After the second ./fastboot-step.sh script, your device will be on the TWRP recovery, now on the same terminal page or a new one enter these commands:
Code:
adb devices
adb shell
exit
You should see your device's serial number from the first command with "device" to the right of it and the second command will basically put you inside the device's directory assuming you have established a successful connection. The last command just put you back to your starting point, now open the firefox browser on the FireOS USB and navigate to the URL below
Download the Pre-Rooted Image from "HERE" This image contains Magisk already so you don't have to worry about installing it separately, the image is larger than the available partition on this USB so this is a good time to either get a second USB or if you want to download the file to your local hdd and pull them from there its up to you, then run these commands:
Code:
adb push <your download location you decided earlier here>/mantis-6.2.6.8-rooted_r1.zip / sdcard/
adb reboot recovery
adb shell
twrp install /sdcard/mantis-6.2.6.8-rooted_r1.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
This basically installs the pre-rooted image to your device, after the last command, you should see on your monitor the Fire Stick Reboot and boot to the Amazon GUI Splash Screen, now very important if you followed my previous instructions of deregistering your device before performing all these steps, it should bring you up to the Amazon Initial Setup Screen, now what you want to do is do the following commands before continuing on terminal:
Code:
adb devices *you should see something your screen where the FS is connected to, click accept or enter can't remember*
Now it should show you in terminal your serial number and "device" next to it, meaning you can run adb commands in which you will run the following to disable OTA updates:
Code:
adb shell
su *after this command you should see something again on your screen, click the check the box "Always Remember" and click ok" *
if "su" was successful, you should see something like this:
mantis:/ $ su
mantis:/ # *the hash means you're running as root, if you don't have a "#" you are not running as root"
Than continue with these commands and should get the following results:
pm disable com.amazon.tv.forcedotaupdater.v2
***Package com.amazon.tv.forcedotaupdater.v2 new state: disabled***
pm disable com.amazon.device.software.ota
***Package om.amazon.device.software.ota new state: disabled***
pm disable com.amazon.device.software.ota.override
***Package com.amazon.device.software.ota.override new state: disabled***
After running all these commands exit adb and continue with the normal Amazon Setup including adding your amazon account. After you get to the screen where you can see all the apps, open a new web page browser in firefox and download "This Add-On" , this one is less than 200MB so it should fit on the Fire OS USB, so I would download it and copy it to /mnt for ease of access, go back to terminal and type this:
Code:
adb devices
adb push <your download location you decided earlier here>/AFTV-MM-1.7-6.2.6.8.zip/ sdcard/
adb reboot recovery *it will boot into TWRP*
adb shell
twrp install /sdcard/AFTV-MM-1.7-6.2.6.8.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
Your device will reboot and if everything went smoothly, you should have a rooted amazon fire stick 4k, Congrats :good:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Edit: S̵i̵n̵c̵e̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵ ̵c̵a̵n̵'̵t̵ ̵b̵e̵ ̵p̵a̵t̵c̵h̵e̵d̵,̵ ̵i̵t̵'̵s̵ ̵i̵n̵ ̵m̵y̵ ̵o̵p̵i̵n̵i̵o̵n̵ ̵t̵h̵e̵ ̵b̵e̵s̵t̵ ̵t̵o̵ ̵d̵o̵ ̵t̵h̵e̵ ̵s̵e̵t̵u̵p̵ ̵a̵t̵ ̵t̵h̵e̵ ̵b̵e̵g̵i̵n̵n̵i̵n̵g̵,̵ ̵p̵a̵i̵r̵ ̵t̵h̵e̵ ̵r̵e̵m̵o̵t̵e̵,̵ ̵t̵h̵e̵n̵ ̵u̵p̵d̵a̵t̵e̵ ̵t̵o̵ ̵t̵h̵e̵ ̵l̵a̵t̵e̵s̵t̵ ̵o̵v̵e̵r̵ ̵f̵i̵r̵e̵O̵S̵.̵ ̵T̵h̵a̵t̵ ̵w̵a̵y̵ ̵y̵o̵u̵ ̵a̵v̵o̵i̵d̵ ̵a̵ ̵p̵e̵n̵d̵i̵n̵g̵ ̵u̵p̵d̵a̵t̵e̵ ̵n̵a̵g̵ ̵s̵e̵t̵u̵p̵ ̵s̵c̵r̵e̵e̵n̵ ̵a̵f̵t̵e̵r̵ ̵d̵o̵i̵n̵g̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵.̵ ̵T̵h̵e̵n̵ ̵e̵n̵a̵b̵l̵e̵ ̵A̵D̵B̵ ̵a̵n̵d̵ ̵u̵n̵k̵n̵o̵w̵n̵ ̵s̵o̵u̵r̵c̵e̵s̵.̵ ̵ After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Edit: Update: meanwhile, the fix for the mentioned 'contact manufacturer' error is known...
Take a look here and here.
Edit/Update: Due to efuses (blocking the bootrom access), it isn't recommended to do any update infront of the unlock...
Sus_i said:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Click to expand...
Click to collapse
Ops Typo let me edit it, I meant to put 6.2.6.8 on the command lol, and aaaa I see I didn't know the exploit couldn't be patched great info, so than yes I will revise my instructions thank so much
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
nandroidint said:
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
Click to expand...
Click to collapse
No. If I remember correct, it has something to do with flashing, i.e. the vendor partition wasn't flashed propperly.
Maybe you flashed not the prerooted!? With the Kamakiri TWRP version is flashing full ota update packages (renamed to zip) also possible... and in the prerooted thread is such a full 6.2.6.8 ota linked.
Edit: Could be that this error is prime video related, idk. rbox said he looks into it soon...
Just for clarification: The prerooted rom is a perfect thing since years.
My suggestion 'avoid any rom flashing' from my last post is just an attempt to keep it simple for beginners.
By the way, if the stick gets all updates in front of the unlock, it makes no sense to update it after the unlock again (unless addon.d support is needed).
I hope that has become clear I very much appreciate all the prerooted stuff
thanx for the tut nandroidint this is exactly what I needed, I wasn't sure how to do the shorting so the video helped out a lot now I'm ready to do this. But I'm sorta a noob when it comes to android so I got few questions tho, 1) what are the main benefits in rooting the fIrestick 4K 2) are there different roms to install? 3) are there root only .apks? 4)also one main thing I would like to be able to do is spoofing the Mac address any idea if that's possible?
5)Oh and lastly what OTB cable do you recommend? sorry for all the questions ?
'std::bad_alloc'
After running the adb push of the manthis.zip Im getting terminate called after throwing an instance of 'std::bad_alloc'.... What Im I doing wrong?
i gave root can i remove amazon services
i dont want google launcher jsut remove services
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable ?
Can I please get some support guys ? previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
davinci2798 said:
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
Click to expand...
Click to collapse
Did you deregister before rooting like the tut says? This is why I’ve been hesitant on rooting because of the lack of support on this forum
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
tsynik said:
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
Click to expand...
Click to collapse
Nice! That’s awesome thanx for the info and reply.
davinci2798 said:
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
Click to expand...
Click to collapse
Hey so have you figured out what was the problem yet? If so could u explain how you managed to fix it? I’m going to root sometime this week and would hate to run into this issue.
USB drive for storage
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
Yes, You can use a USB drive for App loading and Movie storage.
See Troypoint.com for good video.
I suggest a single USB OTG Cable and a USB HUB for your drive.
Then you can add a Keyboard and Mouse which make it MUCH easier to type commands.
Good Luck
How might one do this on a Mac?
Thanks
gogorman said:
How might one do this on a Mac?
Thanks
Click to expand...
Click to collapse
Do what? The only thing u can do on the MacOS is to create the bootable iso usb, you can follow these steps to do so https://www.google.com/amp/s/www.le...-on-an-apple-mac-os-x-from-an-iso?hs_amp=true
After your create the bootable usb just reboot and hold down option and select the bootable usb, once in open up Firefox and download the kamakiri-mantis-v1 and open a terminal window and change the directory to where u have the kamakiri folder, in terminal type cd then just drop in the kamakiri and hit enter. From there u can just follow the tut, FYI the bootable usb you create is a Linux OS so that’s how you can do it on a Mac, you just can’t do the rooting on MacOS, just clarifying Incase that was your question.
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Step by step instructions would be great?
chinkster said:
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
RPM99 said:
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
Click to expand...
Click to collapse
The link he provided explains all that https://forum.xda-developers.com/fire-tv/orig-development/unlock-fire-tv-stick-4k-mantis-t3978459 all except for when to connect to the tv, but I assume it’s after running the kamakiri script, btw it’s not software, you just download the kamakiri mantis while in the Linux usb os, open a terminal and change the directory of the terminal to the kamakiri folder in order to run the ./bootrom-step.sh and ./fastboot-step.sh commands
Edit: just follow the main guide from the link above then read this guide after, that’s the best way to understand it.