Hi guys!
I am kind of new to Android, but I bought a Lenovo A7600H, updated to 4.4.2 and rooted it.
By "mistake" I deleted at least one apk-file in the system folder. I wanted to update to the newest firmware, but due to the missing files I wasn't able to update. So I tried to flash it with the original factory image, which didn't work with SP flash tool, so I tried to flash with fastboot.
Apparently I applied the "system.img" to the recovery partition with the command "fastboot recovery system.img". Now, when I turn on the tab, it just says "SYSTEM image incorrect! Shutdown after 10,9,8,... seconds".
Is there anything I can do now or is my tab lost forever?
Thanks in advance for any help and sorry for the bad description.
Related
Hello, I bricked my wiko ridge 4G (snapdragon 410).
I can only start in the stock recovery with the option "apply update from sdcard".
I have a full backup of my rom I have done just prior to booting on a cwm.
How can I do to create update.zip me to restore my boot.img or even be able to boot me in the cwm?
Note that I have no ADB and fastboot otherwise I would have already been able to access back on my backup.
Thank you in advance
chuppito said:
Hello, I bricked my wiko ridge 4G (snapdragon 410).
I can only start in the stock recovery with the option "apply update from sdcard".
I have a full backup of my rom I have done just prior to booting on a cwm.
How can I do to create update.zip me to restore my boot.img or even be able to boot me in the cwm?
Note that I have no ADB and fastboot otherwise I would have already been able to access back on my backup.
Thank you in advance
Click to expand...
Click to collapse
Hi
Could you tell me how you solve you problem ?
I have the same problem but dont have any backup.
Any help will be wellcome
Thanks
Return to wiko
Try to flash the Stock Rom with the PC tool available on the Wiko page.
yes they put online following my brig. Wiko the so repaired me, returned and put online flash tool
chuppito said:
yes they put online following my brig. Wiko the so repaired me, returned and put online flash tool
Click to expand...
Click to collapse
Hi,
I've had the same problem with my Wiko. I rooted it with King root application and after installing the software update v40 it complained about debuggerd file. I also tried to upgrade the phone with the PC upgrade program but once it reached 35% the process finishe with "download failed". Then, I manage to get debuggerd file from the upgrade PC version and substitute it by the new one. The installation started but just at the end of it complained about a "set_metadata_recursive: some changes failed" and the installation finished. Once the mobile was rebooted it was always looping in the Wiko Logo. I cannot put the mobile into fastboot mode neither factory, just recovery. I'm really desperate. I read something about editing the update.zip file with the OTA firmware and change the method set_metadata_recursive by set_perm_recursive but once I change that the update.zip file is damaged and the Wiko signature is lost (I signed it with android signature but it's not the same. I also tried to upload a new recovery from sdcard (the only thing I can do now) but it also complains about wrong footer and signature validation.
Any ideas?
Thanks.
Br.
Hi guys, i have a big problem. I tried to update my girlfriend's phone (huawei g play mini chc-u01). I read some guides and i downloaded all firmwares from huawei site, unlock bootloader and tried to install updates. But at some point, phone won't boot up ! I made a mistake ! Now the situation is that when i turn on the phone, it shows the honor logo. I tried to flash via fastboot the system, recovery and boot image that i extracted from UPDATE.APP of the firmware taken from huawei site. Also tried to flash twrp recovery and find out a way to unbrick phone, but nothing. I can't find anything that works. An other thing is that in fastboot mode, when i type some erase command, output is remote command not allowed, but flash command seems to work.
How can i restore phone ? Is not there a way to restore it, I can make a aspo or cm based rom from system.img and other stock stuff ? Just split image to see files inside.
The last thing and maybe the core of mistake. I flash via twrp an oem file and then honor logo is appeared.
Thanks at all guys !
Edit: I finally restored phone. it works again flashing its lollipop version firmware.
bob1791 said:
Hi guys, i have a big problem. I tried to update my girlfriend's phone (huawei g play mini chc-u01). I read some guides and i downloaded all firmwares from huawei site, unlock bootloader and tried to install updates. But at some point, phone won't boot up ! I made a mistake ! Now the situation is that when i turn on the phone, it shows the honor logo. I tried to flash via fastboot the system, recovery and boot image that i extracted from UPDATE.APP of the firmware taken from huawei site. Also tried to flash twrp recovery and find out a way to unbrick phone, but nothing. I can't find anything that works. An other thing is that in fastboot mode, when i type some erase command, output is remote command not allowed, but flash command seems to work.
How can i restore phone ? Is not there a way to restore it, I can make a aspo or cm based rom from system.img and other stock stuff ? Just split image to see files inside.
The last thing and maybe the core of mistake. I flash via twrp an oem file and then honor logo is appeared.
Thanks at all guys !
Edit: I finally restored phone. it works again flashing its lollipop version firmware.
Click to expand...
Click to collapse
how did you restore your phone ?
I have a g play mini chc-u01 and I upgraded it directly from android 4.4.2 (c185b067 ) to 6.0 (c185b560 ) but this build has many issues. now I want to downgrade to lollipop but I can't get into the recovery mode. whenever I try to enter the recovery mode, the bootloop happens. I tried to flash the system recovery extracted from UPDATE.APP but it didn't work neither did twrp. so can you show me the steps you made to restore your phone ??
Same Problem here. can you share how you fixed it?
Hi experts!
Is there an available factory image of the latest firmware for griffin xt1650-03 for download? I unlocked my boot loader and tried to flash custom firmware now I am stuck in boot loop. My phone was nougat and updated via OTA last week before I decided to unlock boot loader. I tried loading the latest image I got from firmware.center but I am getting Downgrade version and verification failed when flashing stock partition and not loader. Please help
Note: I did this my wifi became unusable after my last OTA (mac 02:00:00:00) and thought using custom firmware would help
And I did not make a back up
Get it in fastboot mode, flash TWRP and root it. That might work.
I am in exactly the same position as OP, although I have successfully installed TWRP and have open bootloader from which I can boot into TWRP no probs. I didnt do a backup (will never again make this error!!)
The problem arises when I try to flash (any) files over to device I get the "Downgrade version and verification failed" like OP when flashing stock Telus rom (telus phone) or any other rom/files.
Rebooting brings me back to the moto unlocked bootloader page (horrible!) and the only way out is to get key combo or fastboot into bootloader/recovery etc.
Tried flashing multiple images as whole or bit by bit, always get the same bad validation message. Finding it hard to believe this 700dollar phone is a brick after literally following MotoS own 'unlock your bootloader' instructions. Never had issues like this on OPO, S6, S7, LG etc.
PC shows android device connected, nothing in the two empty folders that appear. TWRP confirms I have no OS installed and throws me back to bootloader.Wondering if locking bootloader again will allow me to install 'stock' ROM or at least recovery? I have reached my android knowledge limit and am not sure where to go from here, any help much appreciated!
OK. This happened to me. The way that I solved it was by flashing the RETUS NPL86.25.15 and then flashing the OTA 25.17-3-3 through twrp. Although I think I could've saved the headache if the original instructions included flashing the OEM.bin but anyways. That's what I did. Hope it helps.
Thanks. I did try flashing the oem.bin but got partition name error.
Can you link to the files you mention I think it's a kernel and then an OTA image? Thanks again in advance.
What I mean is that when I first started flashing the RETUS rom the instructions skipped that part so I ended up flashing most of the file system without something so it would never boot but it wouldn't loop it'd just hang. So basically you flash everything and then include the OEM.bin after you do the system chunks
Just a little disclaimer: I am an ABSOLUTE NOOB at this stuff and I just followed tutorials and guides; no experience whatsoever and I badly need your help
It all started when I wanted to root my phone. So I decided to install a custom recovery on the phone first(CWM to be exact). I flashed the recovery.img file and soft bricked my phone. I managed to fix it easily just by erasing recovery by using adb. Afterwards, recovery was accessible again. Since I couldn't do it that way, I tried downloading the phone's latest firmware from ASUS' website and pulled the boot.img out of it and patched it with Magisk. Flashed it and boom, bricked my phone. I tried fixing it the same way I did with the recovery.img but it didn't work. I even tried erasing it and flashing the original boot.img file I pulled out of the firmware file I got from ASUS' website, but it wouldn't work; it would boot up, show the ASUS logo, then shut off. Please, tell me there's a way through this, and btw the phone's bootloader was unlocked for sure; I used ASUS bootloader unlocker from the website. I have all firmware files already downloaded in case I need 'em.
UPDATE: I flashed a boot.img form an older firmware file from the same website and it kinda worked. It boots now and it seems to be stuck on the Zenfone logo now :/
Hey. I remember that you can boot into adb mode and then do
adb sideload "yourfirmware.zip"
The instruction holds true for earlier zenfones. See if it works here.
I have the same phone, but is dead, no recovery, no fastboot mode, no screen.
What can i do?. My pc just detect QDloader driver help plz.
Try this
msoliveras said:
What can i do?. My pc just detect QDloader driver help plz.
Click to expand...
Click to collapse
You need unbrick with: stock ROM
addrom.com/raw-rom-unbrick-for-asus-zenfone-live-l1-za550kl
QFIL program 1.0.0.2 versión
androidmtk.com/download-qualcomm-flash-image-loader-qfil
And valid version of QDloader driver
gsmusbdrivers.com/download/android-qualcomm-usb-driver
watch this video: youtube.com/watch?v=Ao5FB9mVZCU
Important if you zenfone live l1 is 2/3Gb Ram or is Go version 1Gb Ram to download correct stock ROM
Deceinard said:
Just a little disclaimer: I am an ABSOLUTE NOOB at this stuff and I just followed tutorials and guides; no experience whatsoever and I badly need your help
It all started when I wanted to root my phone. So I decided to install a custom recovery on the phone first(CWM to be exact). I flashed the recovery.img file and soft bricked my phone. I managed to fix it easily just by erasing recovery by using adb. Afterwards, recovery was accessible again. Since I couldn't do it that way, I tried downloading the phone's latest firmware from ASUS' website and pulled the boot.img out of it and patched it with Magisk. Flashed it and boom, bricked my phone. I tried fixing it the same way I did with the recovery.img but it didn't work. I even tried erasing it and flashing the original boot.img file I pulled out of the firmware file I got from ASUS' website, but it wouldn't work; it would boot up, show the ASUS logo, then shut off. Please, tell me there's a way through this, and btw the phone's bootloader was unlocked for sure; I used ASUS bootloader unlocker from the website. I have all firmware files already downloaded in case I need 'em.
UPDATE: I flashed a boot.img form an older firmware file from the same website and it kinda worked. It boots now and it seems to be stuck on the Zenfone logo now :/
Click to expand...
Click to collapse
I had the same problem and qfil didn’t worked. Try mi flash tool( try all versions, because not all work). It was able to flash my phone.(zenfone l1)
Hi, I have a allview viva h1001 LTE, I accidentally bricked my device while trying to install twrp(custom one) and now it's bootlooping, I can't boot into recovery or fastboot mode, I tried using SP Flash Tool, but I need the original stock firmware, can someone help me?
Hi. I am also looking for the firmware for this device. There is one firmware that I tried to fill, but it does not have a native scatter and I put it together as best I could. The tablet is boot to recovery but the system does not boot. If you have the opportunity to load the scatter from your original device, then there is a chance that we will defeat this device.
If it's still relevant, then I attach a recovery from a tablet that goes into recovery. I considered the entire dump if someone can see its integrity. Here is full flash read with EFT from other tablet who too restart.
Hi. I wrote down the firmware merged with the EFT, then I downloaded the image from allview p6 pro and using CM2MTK I filled in only the system. The tablet started up but without navigation buttons, with kingorut I made a root, and installed a buildpropeditor. At the end of the build.prop added the line qemu.hw.mainkeys=0 . After the reboot, the buttons appeared. I went into the update and saw the opportunity to install the update over the air but for p6 pro. Can someone tell me where to edit so that the device thinks that it is not p6 about but Viva H1001 LTE ? Thus, download the original update and make the original firmware. Thank you.
I atach build.prop for H1001 and P6_PRO