Related
Hi guys, my Hero encounter the touch screen doesn't work periodically, sometimes it became no response totally, after a few days ,it works well, I think this may be caused by the static electricity, Is there anyone have the same problem? do you guys have some methods to solve it ? Do I need to change a new touch screen?
well i droped mine today and now i have the same issue but the strange part is that i just had a replacement screen and there are no cracks or anything else, so you can't see that it felt out of my pocket.
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
when you say not working properly, what do you mean? the a and l letters on the keyboard dont register unless I press the screen really HARD. so that aria of the screen is unresponsive
what does one do with kaisimg-panel2-320-24-05-10.nbh?
angelodt said:
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
Click to expand...
Click to collapse
Hmm please can you explain what this means ? and where we can find that file because I have the same problem... And now your screen is ok ?
Man one thing I hate about this site is that people do good write ups and it never gets solved!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I got the same problem!! whats the fix? screen replacement? cord lose? what what ?!?!?!!?
This has been discussed a milion times in the General forum.
Screen problems happen to a lot of Hero owners. Just send it to HTC fir a new screen. Don't forget to install an original ruu-rom on it.
Sent from my HTC Hero using XDA App
mach2005 said:
This has been discussed a milion times in the General forum.
Screen problems happen to a lot of Hero owners. Just send it to HTC fir a new screen. Don't forget to install an original ruu-rom on it.
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
I'm over the warranty. How can I fix it? does the screen need replacing? is the cord detached? whats the common issue of this happening? Whenever I touch my screen the notification bar drops down all the time.
i just purchased a old htc hero selling my spice mi300 i usualy get thr same problem in the lower part of thr screen may be i have to.just live with it as there is no warranty or insurance
I have had the same problem.
Mine is fixed within the warranty period.
But i have read something about failing Digitizers.
Maybe that's the problem?
See this topic:
http://forum.xda-developers.com/archive/index.php/t-595485.html
You can buy them at Ebay just look for HTC Hero digitizer.
Below you find a link to the service manual:
http://www.gizmostruction.se/wp-content/uploads/2010/04/Hero_Service_Manual.pdf
If your phone is out of warranty
Maybe you can fix it by yourself
Phone details are in my signature. I reset the phone right out of the box as I always do when new phones or after doing a software upgrade.
I've noticed that marketplace isn't notifying me of app updates available.
When I buy something, it keeps says I have to buy over and over again and never lets me download the app even though I get the email confirmation from MS.
The on-screen keyboard, at the password screen or even when I go to start a text, there is a full 1 second delay or more in the first letter/number I push, always. Is this a defect in the touch screen or software?
My old WP7 had none of these issues.
Anyone else?
92GTA said:
Phone details are in my signature. I reset the phone right out of the box as I always do when new phones or after doing a software upgrade.
I've noticed that marketplace isn't notifying me of app updates available.
When I buy something, it keeps says I have to buy over and over again and never lets me download the app even though I get the email confirmation from MS.
The on-screen keyboard, at the password screen or even when I go to start a text, there is a full 1 second delay or more in the first letter/number I push, always. Is this a defect in the touch screen or software?
My old WP7 had none of these issues.
Anyone else?
Click to expand...
Click to collapse
Take it back and get another one. At a store they should swap it right there and then. It could be software related like every phone at launch has issues or a serious hardware problem
92GTA said:
Phone details are in my signature. I reset the phone right out of the box as I always do when new phones or after doing a software upgrade.
I've noticed that marketplace isn't notifying me of app updates available.
When I buy something, it keeps says I have to buy over and over again and never lets me download the app even though I get the email confirmation from MS.
The on-screen keyboard, at the password screen or even when I go to start a text, there is a full 1 second delay or more in the first letter/number I push, always. Is this a defect in the touch screen or software?
My old WP7 had none of these issues.
Anyone else?
Click to expand...
Click to collapse
Have you synced your device with the desktop Zune client yet? It might be worth a go before you finally swap it.
drupad2drupad said:
Have you synced your device with the desktop Zune client yet? It might be worth a go before you finally swap it.
Click to expand...
Click to collapse
Yes so I could sync all my pics, video, etc.
I already have the device setup exactly how I want it, I'd hate to return it when there is no backup/restore option in Zune. Dang it.
If its a software issue we can rule out Factory Reset... and that Im aware of there hasn't been an RUU leak for 8112 for the titan2 so flashing it is impossible.
Was the issue present from the get go? Like the moment It was turned on before setting up anything?
Tachi91 said:
If its a software issue we can rule out Factory Reset... and that Im aware of there hasn't been an RUU leak for 8112 for the titan2 so flashing it is impossible.
Was the issue present from the get go? Like the moment It was turned on before setting up anything?
Click to expand...
Click to collapse
After turning on my phone out of the box, I went straight and did a hard reset. So I noticed everything after that. Marketplace not notifying of app updates and the touchscreen keyboard issue yes. I only tried buying that app after reinstalling all the other apps I had bought for my previous WP so I can't say about that issue.
I think I will just hang onto the handset until the Tango update is released and hope that resolves the issues.
UPDATE: Looks like marketplace is now notifying me of app updates correctly now and the app purchase I made has no gone through. I guess something was maybe going on with MS's side of things. I'll just deal with the keyboard/dial pad delay thing and hope Tango fixes it, it's only delayed on the first character I enter when I start typing anyway.
92GTA said:
UPDATE:I'll just deal with the keyboard/dial pad delay thing and hope Tango fixes it, it's only delayed on the first character I enter when I start typing anyway.
Click to expand...
Click to collapse
A temporary fix is just to turn off the "key press" sound. Once sound is off, there is no delay. Same issues with the Focus S and my Titan 2.
xs2k said:
A temporary fix is just to turn off the "key press" sound. Once sound is off, there is no delay. Same issues with the Focus S and my Titan 2.
Click to expand...
Click to collapse
Thank you, that worked! I wonder why some windows phone have this issue and some don't? Perhaps the quality & latency of the nand flash? I have noticed this phone is a little slower than my Arrive was.
I had the exact same keyboard / touch screen delay issue. Turning off the keybaord sound definitely seems to have fixed the issue. Thanks.
I had a Lumia 900 and trades it for the HTC Titan II because of the camera issues with the Lumia. The HTC is better in my opinion but the tap delay issue was a real pain and I did not experience it with the Lumia.
I'll give it a shot, too as I have the delay. I also swapped out my Lumia for a Titan 2 and very much prefer it.
I have exactly same issue on my titan II.
I used focus before titan II. But focus hadn't this issue.
I think it can be fixed but now I feel inconvenience a lot.
92GTA said:
Phone details are in my signature. I reset the phone right out of the box as I always do when new phones or after doing a software upgrade.
I've noticed that marketplace isn't notifying me of app updates available.
When I buy something, it keeps says I have to buy over and over again and never lets me download the app even though I get the email confirmation from MS.
The on-screen keyboard, at the password screen or even when I go to start a text, there is a full 1 second delay or more in the first letter/number I push, always. Is this a defect in the touch screen or software?
My old WP7 had none of these issues.
Anyone else?
Click to expand...
Click to collapse
Re-flash the ROM with stock ROM. HTC they have serious problems in doing their initial setup. I had problems with my 2 HTC devices, and flashing helped me.
jazeelkk said:
Re-flash the ROM with stock ROM. HTC they have serious problems in doing their initial setup. I had problems with my 2 HTC devices, and flashing helped me.
Click to expand...
Click to collapse
Do you have the stock ROM for the Titan II?
Anybody please help with htc stoke rom for titan 2, thanks
Stock ROM is much appreciated ! Anyone with some information ?
i too had the keyboard issue, but have mostly gotten used to it, but it would be nice to have it fixed while keeping the keyboard sound.
another issue im having is more hardware related- when i press lightly, on the edges of the screen, there is a "glow" around the area i press like on a pc when you touch the screen. i can also feel the screen around the edges bending slightly, like the screen is loose. anybody else have this?
i have never had this on anything else with a touchscreen- ive had 2 iphones, a samsung gs2 skyrocket, and an asus transformer prime
mbucks911 said:
i too had the keyboard issue, but have mostly gotten used to it, but it would be nice to have it fixed while keeping the keyboard sound.
another issue im having is more hardware related- when i press lightly, on the edges of the screen, there is a "glow" around the area i press like on a pc when you touch the screen. i can also feel the screen around the edges bending slightly, like the screen is loose. anybody else have this?
i have never had this on anything else with a touchscreen- ive had 2 iphones, a samsung gs2 skyrocket, and an asus transformer prime
Click to expand...
Click to collapse
That is probably because of the unibody design they've opted for. This issue is much similar to what annoyingly cheap hardware feeling I get when I press hard on "Windows" softkey. You can feel the spring and at times it makes that cracking sound too. But from what I've read around, as time passes on with these unibody designs, the back case get lose and so does the front chasis. Probably that "glow" you are referring to is due to lose screen chasis?
drupad2drupad said:
That is probably because of the unibody design they've opted for. This issue is much similar to what annoyingly cheap hardware feeling I get when I press hard on "Windows" softkey. You can feel the spring and at times it makes that cracking sound too. But from what I've read around, as time passes on with these unibody designs, the back case get lose and so does the front chasis. Probably that "glow" you are referring to is due to lose screen chasis?
Click to expand...
Click to collapse
no one else has this? because the phone is brand new and did this out of the box
I'm actually having this problem as well new right out of the box. But also its not only the keyboard sound but sound in games as well. When I play games its really glitchy as the game will pause for a split second when there is a long enough gap in sound.
I bought the phone new in box unopend off craigslist for my girlfriend so im not sure if I can get this warrantied. Additionally I tried flashing the stock rom like people have been suggesting but with no luck the issue is still present.
Its a shame that such a nice phone could have such a frustrating problem right out of the box. My first gen wp the HTC Arrive never had this issue. Yet I really haven't seen much online or a fix expect whatever has been said on this thread.
Can my girlfriend just simply activate the phone and take it to at&t and get it replaced without proof that she bought it at the store?
NIKOKAPS said:
I'm actually having this problem as well new right out of the box. But also its not only the keyboard sound but sound in games as well. When I play games its really glitchy as the game will pause for a split second when there is a long enough gap in sound.
I bought the phone new in box unopend off craigslist for my girlfriend so im not sure if I can get this warrantied. Additionally I tried flashing the stock rom like people have been suggesting but with no luck the issue is still present.
Its a shame that such a nice phone could have such a frustrating problem right out of the box. My first gen wp the HTC Arrive never had this issue. Yet I really haven't seen much online or a fix expect whatever has been said on this thread.
Can my girlfriend just simply activate the phone and take it to at&t and get it replaced without proof that she bought it at the store?
Click to expand...
Click to collapse
I found that if you turn off key press sounds and disable the sound enhance, the phone works much much better.
A day or so after upgrading to Jokersax's 0.5.0 build for the Atrix with the Aroma installer, I've discovered that some of the letters on on the keyboard stopped working. Using Touch Test, I've confirmed that there is a roughly 1 inch vertical stripe of my touch pad that just does not register inputs.
Downgrading to previous builds or restoring previous backups of the ROM do not fix the issue.
Is there a chance that the touchpad calibration utility for Aroma caused a miscalibration of the touchpad? Or is this likely physical damage of some sort? I've already tried rerunning through the Aroma installer and recalibrating the touchpad to no good effect.
Any other suggestions from folks?
-----
Update: Solved by replacing the screen/digitizer
mines is doing the same exact thing. from what i have read on there your digitizer is going out. I ordered another one and it should be here today, once I install it, I will let you know if it continues to do this or not.
The digitizer is a common issue with the Atrix. Motorola went cheap on the Atrix.
Funny. I also started experiencing this last week.
How much did your digitizer cost? ( @ Quinto)
Sent from my MB860 using XDA
I just installed JokerSax 0.5.0 2 days ago as well, and today I have noticed a strip up the entire touch screen that is not responding to input. I too used Touch Test to confirm that there is a strip from the back key, all the way up to between 'OROL' in the word Motorola at the top of the phone.
This affects keys B H and Y when in portrait, and the entire qwerty row when in landscape with the usb port to the top.
I dont recall this happening before running Jokersax CM9 but it very well could have been..
shirzadians said:
Funny. I also started experiencing this last week.
How much did your digitizer cost? ( @ Quinto)
Sent from my MB860 using XDA
Click to expand...
Click to collapse
got for $33 off of eBay. Here is the link:
http://www.ebay.com/itm/OEM-Motoroloa-Atrix-4G-MB860-digitzer-frame-/251030640695?pt=LH_DefaultDomain_0&hash=item3a72979837#ht_5015wt_754
It came yesterday and I am going to attempt to put it on tonight.
Thanks, and good luck. Keep us posted.
Sent from my MB860 using XDA
Somebody gave me a stock atrix with a similar condition, it was about 1/2 inch at the top and another 1/2 inch near the bottom (in portrait) mode.....so it's not the rom that you installed.
I too ordered a new digitizer off ebay....except mine cost $43 :-( i should have looked for a little longer...ohh well
I don't think it's necessarily a hardware issue :
The fact that it happened just after installing a new ROM is very disturbing
I have the same problem, and sometimes, with a new ROM, the problem disappears for a couple of hours, then my screen goes totally crazy, then the unresponsive strip reappears
Some people have this problem and a new digitizer didn't solve it
Is there any way that CM9-based ROMs overwrites some touchpad driver ? Does someone else could testify that it could be something else that the digitizer ?
Interesting idea. For the record though, I'm running pure CM7 RC 2. I have heard that the reason one might lose and then regain touch response is due to a hardwear connection/reconnection issue.
When this problem first began to occur, I would briefly retain touch response in the dead strip after rebooting. To test if this was a software or hardwear issue, I physically twisted my phone a few times and regained touch response temporarily, suggesting a hardwear response.
Just my two cents.
Sent from my MB860 using XDA
Anyone have luck with the replaced digitizer yet? I'm hoping to avoid ordering if that doesn't resolve the issue.
Ok, I broke down and bought the digitizer from ebay via the link that quinto0827 provided. I just installed it, and things are working great.
shirzadians said:
Interesting idea. For the record though, I'm running pure CM7 RC 2.
Click to expand...
Click to collapse
Off topic, where did you find cm7 rc2? All I'm finding is rc1 which is what I'm running.
David Guillot said:
I don't think it's necessarily a hardware issue :
The fact that it happened just after installing a new ROM is very disturbing
I have the same problem, and sometimes, with a new ROM, the problem disappears for a couple of hours, then my screen goes totally crazy, then the unresponsive strip reappears
Some people have this problem and a new digitizer didn't solve it
Is there any way that CM9-based ROMs overwrites some touchpad driver ? Does someone else could testify that it could be something else that the digitizer ?
Click to expand...
Click to collapse
I think the same thing.
I had the same problem with my Huawei Ideos U8150 after flashing Dronix 0.5 Rom.
In CWM I can see that the digitizer every 2 seconds it loose my fingers.
same has happened to me on my atrix. one perfectly straight line down the screen which doesnt react to touch. This line is moveable within the aroma installer calibration tool, which btw is what created the problem for me in the first place, after i decided to try the alternate touch option.. So yup, i agree too. I KNOW it was aroma installer that messed my atrix up.. SIGH...And i had just gotten it running top notch too..grrr .. btw that new touch file manager installed through cwm will also move this ghost line around, which could perhaps help some users navigate a little better on their touchscreen.. This is another point that suggests its not a hardware issue. Only other, worse thing i can think of is that the aroma touch installer played with the voltages feeding the screen, and did maybe blow something physically.....
Hey look at this... Just happened today and im so sad... Sometimes this solution in the link seems to work so it should be a hardware issue... http://forum.xda-developers.com/showpost.php?p=27595402&postcount=1
Hello,
I have a Samsung Galaxy s6 Edge G925F with custom rom, i have a problem with my sensor.
I turn my auto-brightness in ON and nothing chang, it's always stay at the same level of brightness, i tested it, if it was a hardware problem with calling "*#0*#" but not, it work perfectly in that.
and for the proximity sensor, when i call someone, the screen turn automaticaly in black, same think, i tried to test hardware, it's work, when i call someone with What's App for exemple, it's work, but it's not work with phone dialer.
(Sorry for my bad english, i'm french)
Can someone help me ? I tried an other rom, same problem, other bootloader / modem, same again.
Same issue here! Don't know what the problem is. Sensor is working when being tested, but somehow system is not receiving that info. Factory reset did not help either. I am on stock everything (5.1.1).
and you have no problem with brightness in mode auto ?
Auto brightness is not working either. It is always at same output value, no matter what I do. And also navigation buttons are not lighting up anymore.
Phone is all stock. Not sure if I should try with other roms...
Sent from my Nexus 6 using Tapatalk
Oh, we have the exact same problem, I just noticed that, my softkey lighting doesn't work too.
Have you got a problem like that, you put your headset's jack into your phone, and It's not detected by your phone ? İ have that issue too, I bought a jack, dock replacement for replace this part, I will tell you what happening next.
I saw your thread, did you disassembly your s6 ? By you or other guys.
If you find any solution to this problem please report it here and I will do the same. Hope we will be able to fix it .
Sent from my Nexus 6 using Tapatalk
Emzelim said:
Have you got a problem like that, you put your headset's jack into your phone, and It's not detected by your phone ? İ have that issue too, I bought a jack, dock replacement for replace this part, I will tell you what happening next.
I saw your thread, did you disassembly your s6 ? By you or other guys.
Click to expand...
Click to collapse
I just checked this, and unfortunately it's not working...not recognized by the phone . Guess it's identical problem.
I did not touch any internals...just sent this phone for repairs, but they did not fix it because they found out that someone was already open it before. Now I do not know what to do.
Sent from my Nexus 6 using Tapatalk
Okay, then, The Phone was already opened before, I will tell you if I found something for that.
Emzelim said:
Okay, then, The Phone was already opened before, I will tell you if I found something for that.
Click to expand...
Click to collapse
Yes, as I wrote in my original thread phone had a problem with faulty battery. It was refurbished phone and seller stated that it has 2 years of manufacturer warranty, but as it turned out warranty was void because someone damaged that battery before and tried to fix it with some tape.
btw. everything else was working fine before we sent the phone for service. When they returned it all these problems started. I have ordered new battery and will replace that by my own I guess because Samsung is not responding to our messages. I guess my girlfriend will have to live with these issues if we are not able to fix them...
if you think your auto brightness is not working check out this app. If that doesn't work then your sensors are faulty/defective and contact Samsung support or your authorized reseller
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
paviol said:
if you think your auto brightness is not working check out this app. If that doesn't work then your sensors are faulty/defective and contact Samsung support or your authorized reseller
https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Click to expand...
Click to collapse
As we mentioned already...every sensor checking app is reporting that senors are working just fine. I removed the battery so can't try this app right now, but will definitely check as soon as I can, thanks.
Update regarding my situation: Since everything failed to fix this device or receive our money back, I decided to open the phone and check if anything else is wrong with it (besides battery) and guess what...audio jack port was completely broken. Plugging in headphones was working before it went to official repair centre, and now I know they broke it. But still I can't do anything about it because Samsung is refusing to fix it. My best bet is to replace that part together with battery and live with other issues.
Worst service I have ever experienced...
Ok so, I will receive this replacement part (jack) this week, I hope it will fix the other problems too.
I'll tell you what happen after that.
Emzelim said:
Ok so, I will receive this replacement part (jack) this week, I hope it will fix the other problems too.
I'll tell you what happen after that.
Click to expand...
Click to collapse
Please do! I also ordered whole usb connector board with headphone jack on it. Let's hope it will work.
btw. I just contented old battery back and tried this app. It is working great, so sensors are fine.
Hıı, I have A good news for you, I just replaced the usb, Jack part and all is working back, proximity sensor, auto brightness control and jack.
Good luck for you ?
Emzelim said:
Hıı, I have A good news for you, I just replaced the usb, Jack part and all is working back, proximity sensor, auto brightness control and jack.
Good luck for you ?
Click to expand...
Click to collapse
Same here! Just replaced and packed everything up few minutes ago. Working great!! Finally! I'm glad we managed to fix this one ...
Just dry up the edges. Try to blow the corners. It is just a little bit wet because the corners have little gaps that let water and dust in. I blow dried my phone and it fixed the problem. If you try to wipe screen with water and it gets inside the edges, problem comes back again
Ich have the same problem. But how can it be a hardware issue when the sensors are working in test module? I don't want to send it in :/
Mine was having this exact problem and was solved by an update I didn't know existed. Go to where you find your updates and download any available. Mine worked great again afterwards. If that doesn't work, Try clearing your cache partition.
prov1kenobi said:
Mine was having this exact problem and was solved by an update I didn't know existed. Go to where you find your updates and download any available. Mine worked great again afterwards. If that doesn't work, Try clearing your cache partition.
Click to expand...
Click to collapse
we are already finishing the year 2017 and apparently samsung continues to present the same defects !! Were you able to solve your sensor problem? Please take a look at my post and please help me!
https://forum.xda-developers.com/galaxy-s8/help/sensors-android-update-please-help-t3721874 join please <<<<<<<<<<<
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Hai Karate said:
As far as I know, ghost touch is almost always a digitizer hardware problem, but I stand to be corrected on that. Have you tried pulling the battery and leaving the phone off for a while (15+ minutes)?
Click to expand...
Click to collapse
yes, i tried, and nothing has changed
any other ideeas?
Oculle said:
yes, i tried, and nothing has changed
any other ideeas?
Click to expand...
Click to collapse
I don't think you have that many options. Here are the things I would try, in order:
- Open the phone and disconnect the screen from the motherboard, then reconnect it
- Factory reset (back up the phone with LG Backup, or TWRP if you have a model that supports it)
- Replace the screen
I have a feeling that a factory reset isn't going to do much of anything, but it's worth trying before you spend money on a new screen.
Re: ghost touch
I had mine doing the same thing, I'm on a h820 however the screens weren't different amongst the variants as far as I know. Was able to get an oem replacement on Amazon for like 68$. The install wasn't all too difficult and did alleviate the ghost touch. Mine was bad bad before changing out the screen. Like it would press and hold the home button or the back button and make the phone unusable. No problems with the new screen so far.
Here's a link to the one I bought. It was two numbers off from the original one on the underside of the screen where the LG info is stamped.
Well it won't let me post the link.. Not enough posts. But it was from a US seller and said oem in the listing title.
Oculle said:
Hello guys,
As i mentioned in the title, i have a problem with my lg h860 variant, this problem is called ghost touch.
Someone have this problem, or any solution...i really don't know what to do, i would like to know if is a software issue or hardware, because i really don't wanna buy a new display if i am not sure about the problem.
Regards.
Click to expand...
Click to collapse
have you tried the touch screen calibration settings?