I've had my s6 edge in black for about a week now and since I got it the display doesn't always register my touches or swipes. Whenever I type on the phone it would do a good job and then randomly not register a touch and this goes for all applications. I've also had some problems scrolling through applications sometimes. I would scroll up or down couple of times and it wouldn't register my touch. Does anyone else have this problem? I haven't seen any thread about this yet so I hope some of you can provide me some insight.
Similar issue
mellomelon45 said:
I've had my s6 edge in black for about a week now and since I got it the display doesn't always register my touches or swipes. Whenever I type on the phone it would do a good job and then randomly not register a touch and this goes for all applications. I've also had some problems scrolling through applications sometimes. I would scroll up or down couple of times and it wouldn't register my touch. Does anyone else have this problem? I haven't seen any thread about this yet so I hope some of you can provide me some insight.
Click to expand...
Click to collapse
Hi !
I had a similar issue, I already post something about it 2 weeks ago. In fact for some reason the responsiveness of my touch screen was great for a few hours, but then it has slowly decrease to a point where the touch capacity stop to respond....
I sent it back to repear and got it today, they remplace the screen (and the battery... Why ?)
Now it works perfectly fine !
Good to know that it can be fixed!
Related
I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
I just bought a archos 101 g9 when it was on sale on woot last week and so far it is working pretty good, however I have an annoying problem with it.
If it has been sleeping for over a few minutes (regular sleep, not the deep sleep) and I wake it back up the touch screen goes crazy. The bottom left corner keeps detecting a touch event. It will cycle from multiple on/off touches a second to one on/off every few seconds. If I rotate the tablet to portrait, it will start scrolling the screen none stop to the left. So far the only fix is to do a reboot.
It does not happen every time, just occasionally when I wake it up from sleep.
Today i got a case for it, and whenever it is in the case, the touch screen goes crazy. Same touch events in that same area.
I am guessing something is wrong with the digitizer. Anyone else seen this problem before?
Have the same problem, and as I've read on xda and archosfans forums, this isn't an uncommon issue. We'll just have to wait for a firmware update, as rebooting seems to fix it, so it doesn't seem to be a hardware problem.
Sent from my ARCHOS 101G9 using Tapatalk 2
I have exactly the same problems.
@ARCHOS: PLEASE FIX THIS PROBLEM. THIS IS A SERIOUS BUG !
Sensitive Touch
I have similar problems with the touchscreen. If I'm holding it with one hand by a corner, it detects touch. The rest of the time it is a little jittery and releases or double taps in games. It's still not a deal breaker, though.
I hope we don't have to swap digitizers to fix it.
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
I have a similar issue sometimes.
For me the fix is simply to clean the screen.
The strange thing is, it happens even when the screen doesn't appear to be especially dirty but I put the tablet to sleep, give the screen a serious clean with a microfibre cloth and the touchscreen issues vanish.
Could be a different issue to what you guys are having but the symptoms are the same and it's an easy 'fix' to try.
Hope it helps.
Sent from my ARCHOS 80G9 using xda app-developers app
feffrey said:
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
Click to expand...
Click to collapse
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
omegaRED7 said:
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I had not noticed that area in the settings before. Recalibrating it in the cover has helped a lot.
I pretty much had this since day 1......
The current state is ; it doesn't work at all then all of a sudden It will pop back into life and then pretty much go "mental" as already described, I also found it reacts poorly to minor temperature variations, i.e going from outside to inside and general day to day travelling. Recalibrating used to "help" but now has no effect.
From watching the debug logs part of me thinks it's a bit of both, hardware and software ( just a hunch ) I noticed the driver fail to get a "ping" response from the hardware a couple of times.
I've pratically given up on it myself and plugged a keyboard and mouse in via a hub on the full size usb...... The hub has now stopped working for some reason , I'm now on a OTG Keyboard with a Virtual Mouse Driver using the numeric keypad and some adb input trickery ,
I've got another touch screen/digitizer to plug in, just not got round to putting it in yet and a little part of me is starting to enjoy finding more elaborate ways of interacting with the device... :laugh:
Does anyone know who the OEM of the digitizer Unit is? My previous investigation led me to china but information seems to be thin on the ground with this one
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
Same problem and even managed a RMA from ARCHOS. Thing is your OC edition fixed it for me.
I thought it was only me upgrading P920 from GB to ICS and JB and got touch problems, but a quick google with "ics touch screen issues" reveals a lot. This problem seems well-spread across devices, ROMs, kernels,...
Basically the main problem is that it's harder to get the phone to register/recognize a touch/swipe. I sometimes have to touch/swipe multiple times for the action to happen. Sensitivity doesn't seem like a problem here, because a very light/soft touch can still be recognized. It's just that the screen often doesn't recognize the touch. Turning on pointer location in development options is the best proof. Try tapping the same spot on the screen lightly (as normal use) and some times it will register the touch, sometimes not. At first it seems like no problem but gradually becomes very itchy for everyday use. It's like using a defective product. But it is definitely NOT a hardware issue, because every time I revert back to good old GB (any version, any kernel) the touch screen just comes back alive. Every slightest touch and swipe registers beautifully, never misses.
So if your device does not suffer from this problem, lucky you. Us who are suffering from this, would like to have some cues on how to solve it.
NOTE: SGS touchscreen booster DOES NOT solve this issue. It's a great tool, though, to increase the touch sensitivity. But as this is not about sensitivity, it's useless for me.
So anyone have a solution? Thanks in advance!!!
So, this thing drives me crazy...I've tried everything I knew and still nothing solved this problem.
I'm using HTC One. About 10 days ago weird things with touch started to happen. It seems that touch is partly unavailable/unresponsible on touch in one or two small areas. It seems to me like theres an empty place on my touch. Visualy is everything fine. Screen is crystal clear and has no damages or scratches. But I can't slide icons without troubles. Somwhere on 1/4 of screen, touch brakes briefly and I need another try to slide the icon. The same thing happens with status bar on the top of screen - I can slide it until that 1/4 part and it stops there and goes back. If I slide it quick with short move, it works fine, just slide alone over problematic area.
Also, few times I had that problem where screen works things on itself will. Makes pictures, or adds filters on Instagram, or, I don't know, just jumps around for few secons. Then, I lock the screen, then unlock it and usually that calm down the screen.
Also weird thing is that, when I want to send message, I can't reach "send" button in first try. I have to drop down writing sheet, than to touch the letters to put it in writing mode again, and then I can click the "send" button. On the same place where it was previously!
At first, I thought that plastic case or PVC protection is the problem, so I took off the protector from the screen. That solved problem for a bit. Then, I put back screen guard, and problem came back. After I totally rejected screen guard, problem is still here. I've tried to reset phone on factory, but that wasn't helpfull...
I forgot to state that I'm using Android 4.2.2 and this started to happen after that version update. I had no problem before.
So, now I'm here, as I don't know what else to do before I take this beauty to service. I just hope that this happens because of software bugs :crying:
Is there anyone who could help me? Have similar problem or know how to fix this?
In the meantime, I'll just hope that 4.3 will fix it themself... :fingers-crossed:
I bought a Mate 20 Pro on preorder and noticed within a few days a seemingly non-responsive part of the screen that was an intermittent issue.
Basically every now and again (often enough it’s annoying but not every time) after I unlock the display I am unable to select any app icons in the lower half of the touchscreen. The top half is fine - the home buttons are fine but everywhere from the middle down is non responsive.
I assumed a hardware fault so amazon replaced it for me - and the new device is exactly the same!
Am I just super unlucky and have managed to get two faulty devices a month apart from Amazon or is something else causing the issue?
Thanks.
Think you've just been unlucky,nothing like that on mine
Fine here too. I assume you tested this as soon as you got the phone before installing any app / custom launcher?
Have you tried running smart diagnostic tests manual mode in hicare, there's a touchscreen display test.
Sent from my HUAWEI LYA-L09 using XDA Labs
I only noticed it in use after I used a custom launcher however I tried multiple launchers and saw the same behaviour.
I just did the HiCare test and it says normal. I did hard reset it the other day and it hasn’t happened since so I will see if anything else happens. I can’t say I am thrilled by the thought of another swap from amazon if it does happen. That’s super bad luck.
Hi how did it go after the hard reset?
I got the same issue myself but instead of being the lower half, my entire screen does not respond to touch. I've done a hard reset my self and i do run the stock launcher. Even though my screen still doesn't respond to touch now and then after unlocking the screen or receiving a phone call.
Touchscreen issue
Yup I get it annoyingly so as well! Often takes a "double tap". Pain in the ace!