My screen cracked on my galaxy s4 zoom. I would like to know if I just need a screen or do I need the whole kit screen digitizer ect...
Also where can I get one at a reasonable price..
Thanks
Related
Hi,
I just got my GS2 1 week ago and now am in big trouble :-(
I just dropped the S2 from my pocket while taking it out.
Now the screen is cracked (top Screen)
Everything else is working AMOLED display is also working fine.
I took it to a customer care and they said they need to replace both the top screen and AMOLED screen since they come as a piece and asked me 150 $
WHat do u guys think ???
will it cost that much ??
Please guide me on this :-(
i will post some images as soon as possible.
FYI : Only the top screen is cracked near to the BACK Capacitive button and the crack goes upto the middle of screen .
$150 sounds right. Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1175772
ok...i thought it will be possible to replace the top screen alone...
bcoz that AMOLED screen is a waste if i replace it as full rite... ???
alch3mist291 said:
ok...i thought it will be possible to replace the top screen alone...
bcoz that AMOLED screen is a waste if i replace it as full rite... ???
Click to expand...
Click to collapse
Ya both have to be replaced, there fused together.
Sent from Samsung Galaxy S2 on TELUS.
Sometime ago I dropped my SGS3 i9300 and got a bad crack spreading from corner to edges but everything was still working fine only the gorilla glass or digitizer was cracked leaving the Amoled Screen perfectly intact.
Anyway I sent it for repair and when I received it after almost two weeks ,I noticed a dull green-bluish tint on the screen when viewed from an angle, also earlier I could barely see anything in sunlight outdoors (Common for Amoleds) but now I can see clearly even when i keep the screen directly in the sunlight!:silly:
Is it possible that the service center people have changed the original Amoled with a cheap LCD ? It was samsung service center!:crying:
Is it possible for me to know by looking at baseband or build no of rom?
for details about rom and all see the image below
s11(dot)postimg(dot)org/pno7cn91v/Screenshot_2013_05_17_16_24_28.png
anyway
4.1.2
Baseband version
I9300DDELK1
Build no.
JZO54K.I9300XXELLC
If you need more details please tell me
It's entirely possible that you got a different LCD brand. It's not uncommon for Samsung to carry multiple manufacturers for parts. There's a way to tell which LCD you currently have but that won't do you any good now. Samsung won't stick in an inferior LCD to rip you off. If you don't like it just go back and get a replacement.
jinosong said:
It's entirely possible that you got a different LCD brand. It's not uncommon for Samsung to carry multiple manufacturers for parts. There's a way to tell which LCD you currently have but that won't do you any good now. Samsung won't stick in an inferior LCD to rip you off. If you don't like it just go back and get a replacement.
Click to expand...
Click to collapse
Well I'm not complaining for the brand but for is it really an Amoled or LCD? Also in dark I used to see black smudges (common in some amoleds) but now they have disappeard ! Does it make any sense
You can't get an LCD ..Samsung did this once on the Galaxy s1 but named it the Galaxy SL. (New device entirely). You bought the phone with Amoled on the box, they can't give you anything else.
It's probably just a new revision improving the sun light and ink spots..
Sent from my GT-I9300 using xda app-developers app
Hi, i have i545 Verizon Galaxy S4 and amoled itself is broken the Digitizer, not just the glass. So screen is cracked. It needs a replecement.
Do you know if its compatible with i9505 models or is it have to be specific i545 model Digitizer to replace it?
And some people sells it without frame, my capacitive buttons are working, i tested them. just touchscreen is not working.
So what is this frame? Does it matters do i have to change it? just my touchscreen and amoled screen is not working
jjjameson said:
Hi, i have i545 Verizon Galaxy S4 and amoled itself is broken the Digitizer, not just the glass. So screen is cracked. It needs a replecement.
Do you know if its compatible with i9505 models or is it have to be specific i545 model Digitizer to replace it?
And some people sells it without frame, my capacitive buttons are working, i tested them. just touchscreen is not working.
So what is this frame? Does it matters do i have to change it? just my touchscreen and amoled screen is not working
Click to expand...
Click to collapse
I have a Verizon s4 that I got with a broken screen and I bought a sprint s4 with a fried motherboard and perfect screen all I did was put my motherboard in the sprint one and works perfect took about 10 mins.
I googled the i9505 motherboard and all connections look the same as the sprint / Verizon motherboards so the screen from a i9505 should work but im not 100%
cmlucht said:
I have a Verizon s4 that I got with a broken screen and I bought a sprint s4 with a fried motherboard and perfect screen all I did was put my motherboard in the sprint one and works perfect took about 10 mins.
I googled the i9505 motherboard and all connections look the same as the sprint / Verizon motherboards so the screen from a i9505 should work but im not 100%
Click to expand...
Click to collapse
well as i heard sprint, metro pcs and verizon has the same frame so if i want to change whole screen it should not be issue between those. but i9500 and i9505 even at&t has different frame.
well i'll check out some places tomorrow. i hope i can find something.
i'll report it here for future, i hope no one would have these issues.
also its way easier with the frame less to worry about and around the same price
so I got this phone a few months back and went to plug it in went for a leak and when i came back the screen had cracked from the port upwards
samsung says its out of warranty (douchebags) so i have to fix it myself because id rather not pay them to do it it feels liek im getting ripped off.
any way the top section looks fine not a scratch its sort of underneath if that makes sense like its a second screen
i tap the screen but it makes no sound
judging from it as you all seem to be in the know here do i need
"NEW Replacement Touch Screen Digitizer Assembly For Samsung Galaxy i9300 Siii S3 L710 White"
or do i have to get
"White Full LCD Display + Touch Screen Digitizer Assembly For Samsung Galaxy S3 I9300-VeryDeal "
both of these are for sale on amazon i was going to post links but i cant cause im a new member
also i dont know if it is relevant but i have the international version of the s3 in white
i have took a few quick pics (bad quality but you can sort of see whats up with it) just incase it helps
i didnt get insurance sadly but i hope someone can help me get this working even if i can just do some kind of temporary quick fix till i get the cash to buy the new screen
thanks
Hi all, I broke my phone's screen. I keep hearing that this model's screen is different and I need this exact model to replace it. Is that true? I looked around and what they sell is a s6 Edge plus screen with no extra details. Would any screen work? I want to change the whole screen assembly since the broken glass is touching the screen. Thanks