I'M NOT THE DEVELOPER OF THE ROM
im going to give you a quick guide on how install the rom
BUGS :1. scroll lagging
2. not very good battery life
3. if you set the lock screen to pattern it will always give wrong pattern
REQUIREMENTS :
1. Custom recovery (TWRP,PHILZ......)
2. JB bootloader
3. kitkat baseband
4. gapps for kitkat
INSTALLATION :
1. Reboot into recovery
2. make a nandroid backup
3. wipe (DALVIK/SYSTEM/DATA/CACHE)
4. flash JB bootloader
5. flash KK baseband
6. flash rom file and un-check the reboot phone option
7. flash gapps
8. reboot
DOWNLOADS :
the ROM zip file (MEGA,,[URL="https://drive.google.com/file/d/0B6ic1eoiMGuhc1NVa3J1Z0pyMGM/view?usp=sharing"]GOOGLE DRIVE[/URL])
KK baseband (cluody's)
JB bootloader D802
Gapps chose cm11
NOTE : AGAIN DO NOT CHOSE PATTERN AS A LOCK SCREEN
OFFICIAL THREAD
Related
Umm.. Yeah !
We can easily swap between the two OSs, without unlocking Bootloader or Flashing TWRP
Just Simply Download the Desired OTA zips below and flash via Stock Recovery. (Stable and Safe)
Steps: To Flash Lollipop OTA
Prerequisite: OTA Zips, Get from Links Below
1. Boot to Stock Recovery (Volume Down + Power)
2. Select Language (English/Chinese)
3. Wipe Data/Cache (Yeah you have to otherwise you get stuck at Boot Logo)
4. Flash the desired Lollipop Based zip (Oxygen OS 2.x.x or Hydrogen OS 14-15 )
5. Wait to complete, reboot n Enjoy.
#Note: All OTA zips can also be Flashed via TWRP
Steps: To Flash TWRP & Root
1. Download OnePlus2 Toolbox
2. Extract and Open the "Run_Me"
3. Install OnePlus2 Drivers, ADB Drivers
4. Put Your Device to FastBoot (Vol Up + Power), connect to PC.
5. Unlock Bootloader, phone will restart and will wipe all data
6. Again Put Your Device to FastBoot (Vol Up + Power), connect to PC.
7. Flash Recovery, using option 6.
8. Wait to complete, Enjoy!
#Note: To root your OnePlus2, download the SuperSU Zip and Flash via TWRP
Downloads: (Google Drive)
Hydrogen_LP_OTA_014
Hydrogen_LP_OTA_015
Oxygen_LP_OTA_011
Misc:
Hydrogen_MM_OTA_01_Beta (Better Dont Flash, it will lock your Recovery Partition)
OnePlus2 Toolbox
SuperSU 2.46
GoogleApps_5.1.1
Confused between Hydrogen And Oxygen ??
- Go for Hydrogen, as of now Oxygen is buggy.
Hydrogen OS Pros:
1. Stable
2. Awesome and Clean UI, Dont like H2 Launcher? Use Nova or like, instead.
3. Finger Print Sensor, Faster n Accurate, Home key works perfectly.
4. Awsome Camera, no bugs.
5. BuiltIn apps Like: Gallery, Weather, Tuner, Notes, Manager.
6. Better Battery n RAM Optimization.
7. Better Dual SIM Management.
8. OnePlus Team more interested in Hydrogen OS, as H2OS_MM_Beta developement in progress. ( No News about OOS_MM)
Cons:
1. No Built-In Support for GoogleServices, Flash Gapps instead. [Solved]
2. Pre-Installed Chinese Bloats, use Purify or Like to remove. [Solved]
3. No support for Locales other than English/Chinese, use MoreLocale. [Solved]
If more, let me know.
If i flash Hydrogen os via stock recovery i can flash the gapps with it ?
blior32017 said:
If i flash Hydrogen os via stock recovery i can flash the gapps with it ?
Click to expand...
Click to collapse
For now "NO" Use TWRP to Flash GApps or Use "microG GmsCore" it can be installed as Normal APK, its in beta stage though.
MicroG GmsCore Thread
Su ??
Which su I have to download for hydrogen in one plus two 64 GB ??
I currently have blisspop 4.03 which is based upon lolipop. I want to switch to a marshmallow rom. Do i need to update my firmware, modem, or recovery (TWRPv2.8.7) before flashing a marshmallow rom
Wipe everything.
Install a newer TWRP compatible with Lolipop environment first : https://dl.twrp.me/oneplus2/twrp-3.0.2-0-oneplus2.img.html (install > images > recovery ...)
Install OOS 3.0.2 which changes the bootloader and modem : http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
DO NOT BOOT (stay in recovery)
Install TWRP compatible with MM environment : https://dl.twrp.me/oneplus2/twrp-3.0.2-2-oneplus2.img.html (install > images > recovery ...)
Reboot to recovery (Reboot > Recovery)
If it's a custom rom that you want : Wipe everything then install it (ZIP)
If you want OOS 3.0.2 then I recommand to Wipe everything again and reinstall OOS 3.0.2
PS : If TWRP ask for allowing modification i recommand to swipe to allow.
xWris3 said:
Wipe everything.
Install a newer TWRP compatible with Lolipop environment first : https://dl.twrp.me/oneplus2/twrp-3.0.2-0-oneplus2.img.html (install > images > recovery ...)
Install OOS 3.0.2 which changes the bootloader and modem : http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
DO NOT BOOT (stay in recovery)
Install TWRP compatible with MM environment : https://dl.twrp.me/oneplus2/twrp-3.0.2-2-oneplus2.img.html (install > images > recovery ...)
Reboot to recovery (Reboot > Recovery)
If it's a custom rom that you want : Wipe everything then install it (ZIP)
If you want OOS 3.0.2 then I recommand to Wipe everything again and reinstall OOS 3.0.2
PS : If TWRP ask for allowing modification i recommand to swipe to allow.
Click to expand...
Click to collapse
Thank you appreciate it
Hi everyone,
a quick question.
I am running a:
RN3 Pro SD Kenzo
8.0.6.0 Global Stable firmware ( Lollipop ), unofficial unlock
ZCX TWRP
... yeah, I am still on Lollipop. Reason is that this firmware, at the time of flashing, proved to be the most stable, so I kept it. It still is the best Xiaomi firmware I tested, out all of them, but now, I would like to test out Lineage OS
What would be the fastest way for me to flash the latest Lineage OS on this phone, while keeping the bootloader unlocked?
Can I just wipe the phone, add Lineage and GApps and flash it through recovery?
make sure you have downloaded latest firmware, LOS rom & gapps....next steps is backup your current rom & go flashing.
twrp > wipe > wipe dalvik, system, data & cache > install latest firmware > install LOS rom > install gapps > reboot > done
here is firmware you have needed
Thank you for taking the time to assist me.
Firmware link is not working, sadly.
... so, basically, if I get this right:
1. boot into my TWRP
2. wipe dalvik/system/data/cache
3. after wiping is done, flash/install the latest CM 14.1 firmware without rebooting, select wipe
4. after firmware finishes flashing/installing, flash/install LOS ( without rebooting ), select wipe
5. after that, flash/install GApps, select wipe
6. reboot, and that's it?
Any special steps I should take to keep my unofficial bootloader unlock, or that does not matter with LOS?
EDITED POST FOR CLARITY AND FUTURE REFERENCE.
Tomo123 said:
Thank you for taking the time to assist me.
Firmware link is not working, sadly.
... so, basically, if I get this right:
1. boot into my TWRP
2. wipe dalvik/system/data/cache
3. after wiping is done, flash/install the latest MIUI firmware without rebooting
4. after MIUI finishes flashing/installing, flash/install LOS ( without rebooting )
5. after that, flash/install GApps
6. reboot, and that's it?
Do I flash latest stable or developer firmware in step 3?
Any special steps I should take to keep my unofficial bootloader unlock, or that does not matter with LOS?
Click to expand...
Click to collapse
sorry...find it here
https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
that is right...follow my instructions & no need to worrie about bootloader
Thank you for the link. But, the firmware you provided the link for is only around 46MB. Is that right?
Thank you for the asistance. Everything is flashed, and working.
Additional step I had to do was to flash the camera fix from here:
https://forum.xda-developers.com/re...niversal-camera-binary-patch-kenzo-n-t3572779
... and done.
Now, as for the root access, only option I have available through Developer options is root through ADB. Do I download the root package from here:
https://download.lineageos.org/extras
... or is there another method for RN3Pro SD LineageOS?
Downloaded LOS root package. I am set
This ROM flashes to your current slot and includes TWRP
no need to change the slot after flashing and no need to flash TWRP or Gapps, just flash and reboot
flashing instructions:
1- Boot TWRP
2- flash the rom
3- flash Magisk (optional)
4- reboot and enjoy
If setup wizard or settings crash, wipe data and try again
if you want to use Mi account then:
1- flash miaccountfix.zip in Magisk (on Android File Host)
2- reboot
3- sign in to your account
4- remove the module from Magisk
5- reboot
ROM includes full F2FS support and EAS kernel
Download: https://drive.google.com/file/d/1b6pm-utG8H-m5J5GF03ZNQ3cTDfAta2p/view?usp=sharing
dinhtu1993 said:
This ROM flashes to your current slot and includes TWRP
no need to change the slot after flashing and no need to flash TWRP or Gapps, just flash and reboot
flashing instructions:
1- Boot TWRP
2- flash the rom
3- flash Magisk (optional)
4- reboot and enjoy
If setup wizard or settings crash, wipe data and try again
if you want to use Mi account then:
1- flash miaccountfix.zip in Magisk (on Android File Host)
2- reboot
3- sign in to your account
4- remove the module from Magisk
5- reboot
ROM includes full F2FS support and EAS kernel
Download: https://drive.google.com/file/d/1b6pm-utG8H-m5J5GF03ZNQ3cTDfAta2p/view?usp=sharing
Click to expand...
Click to collapse
Are you sure this is for nubia redmagic? Because afaik there isn't anything you mentioned in the OP!
you know if it works and if it works for the red magic nx609J ????
Mod edit - translated by https://www.deepl.com/translator:
link down
*******************************
enlace caido
hello
i want to flash lineageos to my smartphone
this is the instructions :
Remove lockscreen pattern/pin
2. Flash latest Android 10 stock rom, flash twrp zip, reboot recovery
3. Flash latest Android 10 stock rom, flash twrp zip, reboot recovery (now you have latest unmodified stock vendor in both slots)
after the step 3, i test to reboot but i have a bootloop
i try to change the slot (fastboot --set-active=a or fastboot --set-active=b) and to boot but same problem , android doesn't start and i go in orangefox
i tried with a lot of rom variants, and i still have the same problem
i tried to wipe data
thanks for your help