[Q&A] [ROM] Echoe ROM v49 - TW - LOLLIPOP - CUSTOMIZED - DEBLOATED - DEODEXED - FAST
Q&A for [ROM] Echoe ROM v49 - TW - LOLLIPOP - CUSTOMIZED - DEBLOATED - DEODEXED - FAST!!!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Echoe ROM v49 - TW - LOLLIPOP - CUSTOMIZED - DEBLOATED - DEODEXED - FAST!!!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
SuperSU?
Hello, thanks for all your hard work. Does the ROM come with root access? Thanks in advance for the reply.
notonmdk said:
Hello, thanks for all your hard work. Does the ROM come with root access? Thanks in advance for the reply.
Click to expand...
Click to collapse
yes and busybox.
Has anyone been able to fix text messaging?
text messages
aznjosh said:
Has anyone been able to fix text messaging?
Click to expand...
Click to collapse
I have also been having issues with text messaging. will probably try and downgrade and wipe factory reset in safestrap and see if that resolves my issues. May also try fresh install again.
I can receive text but not send them
I installed this ROM earlier today. So far I love this ROM. However, I can't send text. I have received them but just can't send them. Any help would be appreciated.
Texting doesn't work for me either
Just flashed this ROM tonight, very slick I like it a lot but I have similar problems with no texting. It appears that my verizon APN is incorrect and when I try to edit it manually it doesn't fix the problem either. Not sure why the option to add another one is grayed out though so I can't make a new APN or edit the APN via the GUI. Had to use ES file explorer to try and edit /system/etc/apns-conf.xml
Anyone else having issues getting into Safestrap? Been having no problems with the ROM other than the inability to send texts, but I just noticed today I can't seem to get into Safestrap. Whenever I restart my phone, the Safestrap screen pops up 4 times, and even if I hit reboot into Safestrap all four times, the phone just boots up normally.
welker85 said:
Anyone else having issues getting into Safestrap? Been having no problems with the ROM other than the inability to send texts, but I just noticed today I can't seem to get into Safestrap. Whenever I restart my phone, the Safestrap screen pops up 4 times, and even if I hit reboot into Safestrap all four times, the phone just boots up normally.
Click to expand...
Click to collapse
Yeah I had the same problem so I went back to kitkat for now.
Great rom! Wiped data and no issues to report.
I am curious how to remove the little data usuage in the top left corner though, I've checked everywhere I can think of and cant find the app via titanium to remove.
Thanks!
just making sure
I read that this is compatible with all s4 versions..that being said it should be safe for a tmobile s4 that's currently running an i9505 rom Right? Also if that's the case do I really need safestrap and/or downgrade and upgrade modem?
SS loaded, broken lock says custom and won't boot
I followed instructions it never booted, and the adb isn't working so i can't flash update, here's my question also about the sms and mms , is there a version of lolipop that fully works ? ok got my adb re-installed and phone finally took update and rebooted and I am now using the phone but still no sms send
Hoodrocka said:
I read that this is compatible with all s4 versions..that being said it should be safe for a tmobile s4 that's currently running an i9505 rom Right? Also if that's the case do I really need safestrap and/or downgrade and upgrade modem?
Click to expand...
Click to collapse
Yes, I actually know of someone running this on a T-Mobile S4. He said he's not had any problems at all. Wi-Fi, data, tether, bt, and sms/mms all working. Take that back...He was having an issue with Safestrap bootlooping 3-4 times before successfully booting the system. But he just uninstalled Safestrap and resolved the issue.
SMSC
Does anyone know how to check the SMSC on lollipop?
Hoodrocka said:
I read that this is compatible with all s4 versions..that being said it should be safe for a tmobile s4 that's currently running an i9505 rom Right? Also if that's the case do I really need safestrap and/or downgrade and upgrade modem?
Click to expand...
Click to collapse
hoodrocka your able to flash custom kernels. just install the ROM via your im guessing TWRP recovery and flash your kernel. I used this ROM on TMobile APNs with MetroPCs worked fine. Some verizon ppl are reporting issues with mms and different things. not having your device I havent been able to test this extensively but with my other ROM Ports Flashing to AT&T, T-Mobile, Sprint etc was possible. you might have to flash kernel, modules, apns or modem to get it fully working. but yes fairly confident itll work for any S4 however when I tried to inform the public about the possibility of a unified US S4 division and post my ports to multiple dev sections I had my threads closed and files pulled for not including a kernel in the ROM package.... lol I tried to tell them that we were beyond all that forced kernel crap but they persecuted all the same
---------- Post added at 07:05 PM ---------- Previous post was at 06:34 PM ----------
androidnoob333 said:
Great rom! Wiped data and no issues to report.
I am curious how to remove the little data usuage in the top left corner though, I've checked everywhere I can think of and cant find the app via titanium to remove.
Thanks!
Click to expand...
Click to collapse
pick a different UI from the aroma installer the one you picked has net data option envoked
Still no change for me on the SMS/MMS front as I still can't send from messaging app or hangouts.
Hey guys. Anyone about to get Viper4Android Fx working with this ROM?
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 08:28 PM ---------- Previous post was at 08:25 PM ----------
Also, a fix for the SMS issues has been found http://forum.xda-developers.com/showthread.php?p=60868269
Sent from my SCH-I545 using XDA Premium 4 mobile app
Thanks MetaMav
The fix for SMS/MMS found by metamav worked for me. I put the files in /system/lib and I am now able to text and send pics with tetra sms. Thanks metamav for finding the fix and gigilie for making an awesome rom!!!!
Side note when I started my phone google maps would crash, I had to update maps for the problem to go away.
Post by metamav
-----------------------------------------------------------------
MetaMav
Working SMS and MMS!
I did some research on other S4 forums, and came across the Sprint S4 development section. They were having the exact same issue with their lollipop ROM's. Their solution, ironically, was to extract a few of the lib files from the released Verizon S4 ROM from @muniz_ri to fix their SMS and MMS problem. However, this has not been implemented into any of their 5.0 TW ROM's as of yet. It is currently a fix posted by @troyboytn. It only involves pushing some files via a root file explorer and changing a couple file permissions.
Here is the link to the post: http://forum.xda-developers.com/show...&postcount=281
(And a big thanks to @thastaniard who assisted with the fix)
It also seems we both have the same issue with the default Samsung messenger app when implementing this fix. You cannot send MMS from it. However, you can use either Hangouts or Textra to send SMS and MMS just fine. I have not tested receiving MMS, but I wanted to get this out for other people to try.
@gigilie I imagine this fix could be implemented in your next release (if you haven't already found this solution). It could also be converted into a flashable zip, I just don't have the time right now to make one. There may also be a solution for the default messenger app and sending MMS.
On a side note, does anyone know how to enable "None" as the screen lock? The options for "Swype" and "None" are grayed out in the settings. I have changed security settings and tried different kernels, but nothing works.
How do I properly install
I'm rooted on OC1, but how exactly do I install this rom? I don't have safestrap as I'm aware it is not compatible on LP. And I saw I have to flash the downgrade tar. Is that through odin? And after that what's next?
777agic said:
I'm rooted on OC1, but how exactly do I install this rom? I don't have safestrap as I'm aware it is not compatible on LP. And I saw I have to flash the downgrade tar. Is that through odin? And after that what's next?
Click to expand...
Click to collapse
Well, I am confused at that part Also.
I would just downgrade to nc5, flash the ROM in safestrap, boot into Download and do the upgrade, and boot. If you want xPosed, you will have to find Muniz_ri's method of a temporary safestrap to flash the fix by arter97
Related
[Q&A] [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY S
Q&A for [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY STUNNING
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY STUNNING. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
everything runs but no transparent anything
did clean wipe etc. but get no transparency on anything
CarHDRom V.32.1S VZW NG6-NCx v1 NG6-NCx STOCK
Every time I attempt to do a clean install of CarHDRom V.32.1S VZW NG6-NCx v1 on my sch-i545, I keep getting the following message while in aroma: file_getprop: failed to stat "/tmp/aroma/emoji.prop" no such file or directory (including quotes). When I reboot the phone I don't get any of the options that I chose during the aroma installation. All I get is the stock S5 rom. Can you please help me with this because I would really like to you use this rom along with all the features that I chose during installation. Thanks so much. Keep up the great work!!
MsBionic said:
Every time I attempt to do a clean install of CarHDRom V.32.1S VZW NG6-NCx v1 on my sch-i545, I keep getting the following message while in aroma: file_getprop: failed to stat "/tmp/aroma/emoji.prop" no such file or directory (including quotes). When I reboot the phone I don't get any of the options that I chose during the aroma installation. All I get is the stock S5 rom. Can you please help me with this because I would really like to you use this rom along with all the features that I chose during installation. Thanks so much. Keep up the great work!!
Click to expand...
Click to collapse
this issue has been resolved it was an error in the aroma scripting look for an update in an hour or 2 (uploading now)
---------- Post added at 01:08 AM ---------- Previous post was at 12:57 AM ----------
[email protected] said:
did clean wipe etc. but get no transparency on anything
Click to expand...
Click to collapse
hmmm interesting havent ran into that yet.... im working on a new version with another theme included and I can verify that transparency works (carotix was the first to have framework with transparency on the S4)
Hi great room as usual but one problem after flashing modules wife turns on but keeps trying to obtain ip address then connection fails wife works fine with other roms any help would b appreciated
I have the same ip issues and ive tried all of the fixes you have posted so far. Anything else i can try? I really like this rom. Also, I have a SCH-I545 on the carHD verizon rom, bit now in phone info it says im on a chaos rom and my phone is a gt-19505. Wassup with that and is that maybe my problem? If it really is the gt model now, does that mean i dont have to use safestrap now and could use a better recovery? Cant wait for your imput bro..
cheppallet said:
I have the same ip issues and ive tried all of the fixes you have posted so far. Anything else i can try? I really like this rom. Also, I have a SCH-I545 on the carHD verizon rom, bit now in phone info it says im on a chaos rom and my phone is a gt-19505. Wassup with that and is that maybe my problem? If it really is the gt model now, does that mean i dont have to use safestrap now and could use a better recovery? Cant wait for your imput bro..
Click to expand...
Click to collapse
not as far as you can throw the phone it shouldnt... i mean I'm on the same thing you guys are on and I use wifi/tethering/gps all day everyday.... I am working on an update for this ROM but our phones are tehnically that gt-19505 its simply so the built in apps recognize it as the same phone but i did mess up and kept the Chaos one in lol wont make a difference but I realize my mistake.
Ever since I upgraded to NG6 from NC5, I've been having the same issues that most have been experiencing with connected to WiFi: It tries to connect but no IP connection and no GPS. WIFI will scan and see available networks, i can attempt to connect to a network and pass authentication. It hangs when obtaining and ip from DHCP. I've tried every NC2 and NG6 WiFi fix and module but still no connection.
One thing that I noticed was that the build is listed as Chaos, ending in NG8, could that be one of the reasons why there's issues connecting to wifi? I really like this rom and I've tried every solution listed within this thread but to no avail. I'll look out for an update but in the meantime, I'll check out Phoenix 10 or just return to stock if nothing else works.
Thanks for all you do!!
MsBionic said:
Ever since I upgraded to NG6 from NC5, I've been having the same issues that most have been experiencing with connected to WiFi: It tries to connect but no IP connection and no GPS. WIFI will scan and see available networks, i can attempt to connect to a network and pass authentication. It hangs when obtaining and ip from DHCP. I've tried every NC2 and NG6 WiFi fix and module but still no connection.
One thing that I noticed was that the build is listed as Chaos, ending in NG8, could that be one of the reasons why there's issues connecting to wifi? I really like this rom and I've tried every solution listed within this thread but to no avail. I'll look out for an update but in the meantime, I'll check out Phoenix 10 or just return to stock if nothing else works.
Thanks for all you do!!
Click to expand...
Click to collapse
Have you or anyone tried the NC5 kernel, modules and bootloader combo to see if it gets rid of the DHCP issue?
Yes I tried using NC5 kernels and modules and still no connection.
LGtMgG2t said:
Have you or anyone tried the NC5 kernel, modules and bootloader combo to see if it gets rid of the DHCP issue?
Click to expand...
Click to collapse
35s v2 not booting for me. No boot animation just blue blinking l.e.d. running mdk.
Anyone get it to boot yet? I don't have enough posts to ask in the other section
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
mochamoo said:
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
Click to expand...
Click to collapse
Yeah I've tried everything I can think of and can't get it. Been running 32.1s myself love it but would like to see what the newer version looks like. Thought we had a shot with the ported version!
mochamoo said:
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
Click to expand...
Click to collapse
Are you on mdk also?
zekesamas said:
Are you on mdk also?
Click to expand...
Click to collapse
Yes I am.
CarHDRom_V.35S_VZW-V2-gogolie
I tried this update and it works fine!! All the modules included in the install (NC2, NC5, NG6) work fine, no need to install any other modules. I'll keep a look out to see if you add the NK1 modules to the install. The wifi works fine. The only issues that I've experienced is that the CarHDRom Turkbey causes force close issues, the GPS isn't working and there are force close issues when trying to access Contacts. Which may have to do with the Google Play Services since my apps from the play store no longer do an automatic update although I do have it set to do it. Other than that, a Very good-looking Rom. One of my favorites. Thanks for the great work!!
Will ss 3.72 work for this, or do I need ss 3.75?
Thanks!
Boot animation doesn't work but it will boot. No Wifi!!!!!! Other than that it's beautiful and I am using safe strap 3.75. Any ideas?
Sent from my GT-I9505 using XDA Free mobile app
Q&A for [ROM] Stock ZV6 Base - Odex & Deodex
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Stock ZV6 Base - Odex & Deodex. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can this be flashed over my current setup?
Yup. And you can restore back if you want. The only thing that sticks is the modem
Again thanks for all the hard work. Really love the work you do.
OK so I made the leap and dirty flashed this over my current setup. Now I'm having issues with gmail fc'ing. So I uninstalled it thinking that may help. So I tried to install it from the play store and it says "incompatible update"??? Now I can't even sideload it as it tells me " application not installed". Any ideas as to why its doing this?
---------- Post added at 12:59 PM ---------- Previous post was at 12:47 PM ----------
OK so something weird just happened... I went into recovery to fix permissions to see if that would help and gmail was somehow reinstalled... Its still not working but weird.
---------- Post added at 01:04 PM ---------- Previous post was at 12:59 PM ----------
Disregard my previous posts. Its working now.
I'm really liking the ZV6 update! The ROM is smooth and no lag noticed. I was able to pick up cell signal quickly. Great Job!
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
klarthur said:
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
Click to expand...
Click to collapse
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
engine95 said:
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
Click to expand...
Click to collapse
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
klarthur said:
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
Click to expand...
Click to collapse
You got it.
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
bryster126 said:
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
Click to expand...
Click to collapse
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
engine95 said:
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
Click to expand...
Click to collapse
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
bryster126 said:
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
Click to expand...
Click to collapse
Clean install.
If you used an app to change DPI, then that's probably the issue. You need to wipe data also.
If through the build.prop, then it should've been OK.
You might be able to dirty flash the odexed as that's like factory.
Again, were taking about a factory update so it really should be a clean install.
Anyone having issues with Android Wear and ZV6? When connected to my Moto360 I get running sync loop. The only thing I haven't tried is resetting the phone and watch.
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Edit. I wouldn't think stock recovery would flash this. It's using bits and pieces of ZV6 but not all of it.
And I think the updater-scipt would make it fail. I may be wrong though.
engine95 said:
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Click to expand...
Click to collapse
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
And again, I'm outta Thanks, so Thank you.
The 5 sec delay I talked about has disappeared for me now. But then I've flash about a million Roms in the last few days.
Others aren't getting the delay at all.
I guess what I'm saying is you don't need to reflash Bump TWRP. It works just fine. Even if you get that slight delay. Eventually it'll go away.
Edit. Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
engine95 said:
Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
Click to expand...
Click to collapse
I will get TWRP and have some fun when I get back. I'm traveling right now, so I'd rather be at home if something goes awry.
Sent from my LGLS990 using XDA Free mobile app
Q&A for [ROM] Cleaned & Enhanced Stock Verizon NK1 4.4.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cleaned & Enhanced Stock Verizon NK1 4.4.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nk1 s4 wont reboot without battery pull.
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
Are you running with Safestrap or MDK bootloader?
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
Safestrap
shanething said:
Safestrap
Click to expand...
Click to collapse
The issue must be related to safestrap. I've only tested this rom with MDK bootloader so safestrap isn't officially supported. Have you installed all the NK1 modules for safestrap already?
NK1
Thanks
wifi
For the life of me I can't get the wifi to work. I'm on ss 3.72. I've flashed nc5, ng6 , and nk1 modules, none work.
Also, in Samsung gear app, went I go to Samsung apps, nothing happens.
Thanks
mush2699 said:
For the life of me I can't get the wifi to work. I'm on ss 3.72. I've flashed nc5, ng6 , and nk1 modules, none work.
Also, in Samsung gear app, went I go to Samsung apps, nothing happens.
Thanks
Click to expand...
Click to collapse
Try here
Download the "I545_NK1_Stock_Partitions" file and flash with Odin (AP button) and give that a whirl. My wifi is dead whenever I come back to my stock slot after playing with another custom ROM on Slot 1 (Safestrap). To be honest I haven't a clue why it works (kernels, bootloaders, modems, etc makes my mind melt) but it's worked for me every time.
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
shanething said:
I have cleaned & enhanced stock verizon nk1 4.4.2 Rom. Everything works fine but I have to battery pull to reboot . It locks up with the all the outside lights still on. Any ideas?
Click to expand...
Click to collapse
From the Safestrap thread:
Known Issues:
1) When powering down from the ROM running on a ROM slot the phone will hang. You must long-press the power button to shut down the device. I will debug as time permits.
The long press doesn't work for me and I have to pull the battery, then I go fix my wifi as I posted further down. Or up I guess??
Anybody able to get the mobile hotspot working? Mine says error when I try and use it. I tried to flash the nk1 modules again, but no dice. Running safestrap
Sent from my SCH-I545 using XDA Free mobile app
Debloated OC1 Rom?
First, I am very grateful for muniz_ri's hard work and dedication to get us rooted Lollipop! I also really appreciate all of those who assisted muniz_ri in helping create this lollipop rom. I was curious to know if anyone who was planning on creating a debloated version of this rom. I used Titanium Backup to freeze the Samsung/Verizon bloat. However, there's something knowing that all that bloat is completely removed.
Now that Lollipop is out, is there a ROM of that version that has been modified in the same way as this one?
Q&A for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lollipop galaxy s5 tmobile
Would you lose root?
Would metro pcs galaxy s5 beable to flash this
Blitztex said:
Would you lose root?
Click to expand...
Click to collapse
yes most likely. these tars don't wipe data, but they do disable root and replace a custom recovery with the stock recovery.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Dr. Fed said:
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Click to expand...
Click to collapse
Yes the 900t works. My steps posted here: http://forum.xda-developers.com/showthread.php?p=58967459
Sent from my SM-G900T using XDA Free mobile app
your garbage links ,mirrors, are an absolute waste of time.
am i missing A RIDICULOUSLY OBVIOUS SECRET SOCIETY STEP IN *trying* to use THE MOST LIKELY BAD LINKS YOUVE SO GENEROUSLY GIVEN??
IM BAFFLED,....DONT GET IT IVE NEVER HAD SO MUCH GODDAMN TROUBLE ACQUIRING, THEN ATTEMPTING TO OPEN A FILE FROM A LINK.here of all places???? this is outright bull
downloaded from wack mega
attempted to unzip.......FAIL ........"
The link was perfect for me don't know why you're freaking out
OMGitsAlize said:
The link was perfect for me don't know why you're freaking out
Click to expand...
Click to collapse
Sounds like they got up on the wrong side of the bed. I think it is entirely user error.
To the one thay asked about putting Lollipop on the Metro s5 You Can definitely flash the Lollipop tar on a metro s5 But that will make your firmware completely Tmobile based.
Make sure u back up Metro s5 4.4.2 with twrp
Also latest twrp flashed fine on my Tmobile S5 on Lollipop official
Sent from my SM-G900T using XDA Free mobile app
I recently flashed this yesterday with odin. Everything is working great, love it. only issue I have been experiencing isnt really much of an issue but rather just annoying. For some reason I am unable to change any text notification sounds. No matter what I do it is stuck on the whistle notification. Ive even booted back into recovery and tried to wipe cache again and that doesnt seem to work either. I already performed a factory reset in recovery before first boot. So idk. anyone know what the issue could be?
---------------
Sent from my SM-G900T using XDA Free mobile app
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
zmdixon87 said:
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
Click to expand...
Click to collapse
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
androidfine16 said:
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
I am stock not rooted. Used Odin to do all flashing after I first did Ota 5.0 update. Without rooting what would you suggest?
Q&A for [ROM] 100% Stock I545_OC1 - 5.0.1 (MDK)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] 100% Stock I545_OC1 - 5.0.1 (MDK). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installing ROM's
I was wondering since the OTA update that gave Galaxy S4 Verizon users Lollipop, is it possible to install this ROM and then download Cyanogenmod? I'm wondering this because there is Loki in this ROM and as far as I know Loki allows you to install any ROM. Correct me if I'm wrong. Also does flashing this ROM give root access, or is there a separate thread for that? Thanks.
Can I just use CWM recovery to flash this and is there any extra steps that I need to do other than the normal that I usually do when flashing Roms. Im on VRUAMDK bootloader and MDK baseband with CWM version 6.0.4 running Hyperdrive rls 21
Sent from my SCH-I545 using XDA Free mobile app
Ridwan Majid said:
I was wondering since the OTA update that gave Galaxy S4 Verizon users Lollipop, is it possible to install this ROM and then download Cyanogenmod? I'm wondering this because there is Loki in this ROM and as far as I know Loki allows you to install any ROM. Correct me if I'm wrong. Also does flashing this ROM give root access, or is there a separate thread for that? Thanks.
Click to expand...
Click to collapse
If your bootloader is not the MDK version the answer is no. Any bootloader after MDK cannot be exploited with loki. If you don't know which boolloader you have type "getprop ro.bootloader" from within a terminal emulator and the results will tell you.
Okay... So I will respectfully move this question from the main thread of the ROM to here.
Has anyone successfully completed a Tap-n-Pay transaction using Google Wallet?
I am not able to have the reader even recognize the 'tap' much less get to the 'pay'. But on OctOL, I am able to complete these same transactions.
bucklyv said:
Okay... So I will respectfully move this question from the main thread of the ROM to here.
Has anyone successfully completed a Tap-n-Pay transaction using Google Wallet?
I am not able to have the reader even recognize the 'tap' much less get to the 'pay'. But on OctOL, I am able to complete these same transactions.
Click to expand...
Click to collapse
Have you tried any other NFC tasks to see if it's NFC or wallet issue?
I don't use tap and pay so can't help there.
Redflea said:
Have you tried any other NFC tasks to see if it's NFC or wallet issue?
I don't use tap and pay so can't help there.
Click to expand...
Click to collapse
So I have a Note II for my work phone and I just turned on SBeam and transferred a file both directions between the two phones... so I guess it is, in fact, a Google Wallet problem, not a phone/kernel problem. At least on the surface anyway.
Thanks, again for the help.
At least you know NFC can work with the ROM in some applications.
Well... I tried it again and it still will not work with Google Wallet.
Bummer.
Any chance that the kernel posted by Surge might have a tweak that can help with the nfc?
I did go back and confirm that the OctOL Lollipop ROM works flawlessly and actually communicates the transaction more quickly than the TW based Hyperdrive ROM.
Transparent Accuweather Widget
Running MDK. Flashed w/TWRP no problems. But I miss the Transparent Accuweather. Tried flashing a couple mods to no avail. Has anyone installed transparent Accuweather mod with this stock rom? Thanx in advance.
Root
Is there a method to root after flashing the stock ROM? I've been looking but I can't find it.
---------- Post added at 08:57 PM ---------- Previous post was at 08:46 PM ----------
The flashfire link says that there is no beta. Is there another link to use or something else that can be done to install Flashfire?
If you're on 5.0.1 stock unrooted, then you're currently out of luck, I believe, no root/roll-back method.
Anyone Else have problems with overheating?
So I am on MDK rooted flashed TWRP after I flashed this rom. Everything is running smoothly however when I use Bluetooth streaming music in my car and navigation the phone gets extremely hot to the point where I get a cooling down error message. Once that happens the phone goes into closing applications and then eventually gets warm enough to shut down. So at first I thought kernel issue, tried with the Hulk kernel same result. Even on different roms such as Dan's GPE lollipop, the phone heats up and shuts down. I have ODIN back to MDK using a .pit file and NAND erased all on this phone and still the heat has been an issue.
i know its common with these phones to overheat, so I contacted Verizon and had two replacements sent which one was running NG6 and the other OC1. Both overheated and shut down doing the same thing as the MDK baseband phone I originally had. Anybody have any similar situation, or have an idea about what I should try to keep these phones from overheating? As a a side note the phones bloat apps were frozen on the replacements as best I could since neither were rooted. I don't know what I should do since I need the phone for navigation and I don't have an upgrade since I still have unlimited data, and seeing as the replacements are all acting the same, that doesn't leave me too many options with getting a phone that actually works.
Thanks for any help and advise on what I should do.
JCTechie said:
So I am on MDK rooted flashed TWRP after I flashed this rom. Everything is running smoothly however when I use Bluetooth streaming music in my car and navigation the phone gets extremely hot to the point where I get a cooling down error message. Once that happens the phone goes into closing applications and then eventually gets warm enough to shut down. So at first I thought kernel issue, tried with the Hulk kernel same result. Even on different roms such as Dan's GPE lollipop, the phone heats up and shuts down. I have ODIN back to MDK using a .pit file and NAND erased all on this phone and still the heat has been an issue.
i know its common with these phones to overheat, so I contacted Verizon and had two replacements sent which one was running NG6 and the other OC1. Both overheated and shut down doing the same thing as the MDK baseband phone I originally had. Anybody have any similar situation, or have an idea about what I should try to keep these phones from overheating? As a a side note the phones bloat apps were frozen on the replacements as best I could since neither were rooted. I don't know what I should do since I need the phone for navigation and I don't have an upgrade since I still have unlimited data, and seeing as the replacements are all acting the same, that doesn't leave me too many options with getting a phone that actually works.
Thanks for any help and advise on what I should do.
Wife had that message, is your phone in the sun when you are having these issues? I have 0 overheating issues and I even use teather. Rooted MDK and wife's is Verizon non rooted.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
SafeStrap question?
If I rooted my device with ss how do I install this ? Not sure about changing over to twrp or how to. and I want to get rid of the custom lock screen at boot up. any help please and thank you in advance . ok just so everyone knows what I am running http://forum.xda-developers.com/galaxy-s4-verizon/development/rom-echoe-rom-v49-tw-lollipop-t3099930
Hi there... Just bought a Verizon S4 for my wife. Don't know anything yet about flashing it with custom rom. Heard about safestrap, locked boot loader... some complicated stuffs I don't mind with my Note 2.<br />
So can someone give me the right steps coming from a stock NK1? Not yet rooted, not yet flashed... all stock...<br />
Thank you in advance.<br />
<br />
Envoyé de mon SM-N910C en utilisant Tapatalk<br />
---------------<br />
<b>Admin Note: this thread has a dedicated questions and answers section which you can access here -->.</b>
Envoyé de mon SM-N910C en utilisant Tapatalk
Known issues - none = wrong!
There is a very major issue. Non MDK users cannot install Viper4Android because SELinux mode cannot be changed to permissive. Spent all day getting this rom installed and working out the kinks only to find out that Viper4Android cannot be installed due to stock kernel SELinux mode not being able to be changed to permissive.
Nevermind I found fix
beavis5706 said:
There is a very major issue. Non MDK users cannot install Viper4Android because SELinux mode cannot be changed to permissive. Spent all day getting this rom installed and working out the kinks only to find out that Viper4Android cannot be installed due to stock kernel SELinux mode not being able to be changed to permissive.
Click to expand...
Click to collapse
Nevermind I found a fix over at http://androiding.how/how-to-fix-viper4android-selinux-policy-issues-on-lollipop/
I used Recovery Flashable zip w/ FlashFire and got Viper4Android working with this deodexed rom.
Tether Mod Deodex?
I couldn't find the answer to this on the main thread or here - last night when I tried to flash the tether mod over the top of the standard rooted-odexed ROM, the phone booted up and immediately started throwing System errors. I was able to factory reset back to stock, but the tether mod obviously didn't work. Does that mod need to be flashed over the deodexed version of this ROM to work? If not, any other ideas on how to make the tether mod work?
Help
Good evening,
I get lost in all this. Here are my properties:
SCH-I545
Baseband: I545VRUEMK2
Number version: JSS15J.I545VRUEMK2
Android Version : 4.3
I would like to know:
1-) How to install a recorvery on the SCH-I545 already rooted with saferoot...
2-) How to know if my bootloader is to dévérouiller and if not how to make him(it) 3-) How then I to install(settle) the ROMA OC1
I am afraid of scrubbing my telephone.
Thank you for your help
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Good evening,
I get lost in all this. Here are my properties:
SCH-I545
Baseband: I545VRUEMK2
Number version: JSS15J.I545VRUEMK2
I would like to know:
1-) How to installa recorvery on the SCH-I545 already rooted with saferoot...
2-) How to know if my bootloader is to dévérouiller and if not how to make it
3-) How then I to install) the ROM OC1
I am afraid of scrubbing my telephone.
Thank you for your help