I just ported from LG L90 to LG G2 mini d618.
original post is Here
thanks a lot for @BigMajster as the creator
You need:
-LG G2 mini d618
-Custom recovery
-30mb free space on external SD card
-external SD card with backup or update.zip with system
Warning:
- Do backup your ROM and internal SD, because this will erase the partitions /system, /cache & /data (including /data/media).
Ready? Let's get started:
-Boot phone to recovery mode
-Install PartitionTableTool_d618.zip from sdcard
-Now you have 3 options to choice:
Maximal- system partition have only 730mb so you can install only custom rom like CynogenMod
Optimal- system partition have 1,5gb so you can also install stock LG rom, but you still have more data.
Stock- this is orginal partition table
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Restore you backup or install new rom form update.zip
-Restore Internal SD
Disclaimer:
- I am not responsible if you brick your device or lost your data. It is possible that it does not work on all variants.
DOWNLOAD: http://d-h.st/mevf
lol, i'm using it for 5-6 months. Hack from l90 is fully supported on our g2 mini =)
System_F said:
lol, i'm using it for 5-6 months. Hack from l90 is fully supported on our g2 mini =)
Click to expand...
Click to collapse
Yes me too. I think not everyone knows about it, so I make a thread here.
myllo.setya said:
Yes me too. I think not everyone knows about it, so I make a thread here.
Click to expand...
Click to collapse
anyway thanks =)
System_F said:
lol, i'm using it for 5-6 months. Hack from l90 is fully supported on our g2 mini =)
Click to expand...
Click to collapse
Same here, i didn't know this need a port, in my case worked perfectly only editing updater-script
Its funny to see that lg set 890mb for cache, mostly useless
sergioslk said:
Same here, i didn't know this need a port, in my case worked perfectly only editing updater-script
Its funny to see that lg set 890mb for cache, mostly useless
Click to expand...
Click to collapse
in this version, I change kernel of ptt.img with d618 kernel. and I remove the phone type selection menu. in order to avoid mistakes in choosing the type of phone.
Woah cool. Ill try this tonight
please log d618
ls -al /dev/block/platform/msm_sdcc.1/by-name/
SkyLK said:
please log d618
ls -al /dev/block/platform/msm_sdcc.1/by-name/
Click to expand...
Click to collapse
see this attachment.
myllo.setya said:
I just ported from LG L90 to LG G2 mini d618.
original post is Here
thanks a lot for @BigMajster as the creator
You need:
-LG G2 mini d618
-Custom recovery
-30mb free space on external SD card
-external SD card with backup or update.zip with system
Warning:
- Do backup your ROM and internal SD, because this will erase the partitions /system, /cache & /data (including /data/media).
Ready? Let's get started:
-Boot phone to recovery mode
-Install PartitionTableTool_d618.zip from sdcard
-Now you have 3 options to choice:
Maximal- system partition have only 730mb so you can install only custom rom like CynogenMod
Optimal- system partition have 1,5gb so you can also install stock LG rom, but you still have more data.
Stock- this is orginal partition table
-Restore you backup or install new rom form update.zip
-Restore Internal SD
Disclaimer:
- I am not responsible if you brick your device or lost your data. It is possible that it does not work on all variants.
DOWNLOAD: http://d-h.st/mevf
Click to expand...
Click to collapse
What should I change to make it work on d620?
Fulga666 said:
What should I change to make it work on d620?
Click to expand...
Click to collapse
Just edit update-script from the zip. Remove the first line.
Now I can't mount Data/Cache, could I do something to fix this? I don't really want to flash a new kdz. :/
EDIT: Okay, I've fixed it, palyed with the wiping buttons and rebooted a few times.
myllo.setya said:
see this attachment.
Click to expand...
Click to collapse
thanks, please parameter -al
ls -al /dev/block/platform/msm_sdcc.1/by-name/
I want to compare size and name partitions d618 and d620r
SkyLK said:
thanks, please parameter -al
ls -al /dev/block/platform/msm_sdcc.1/by-name/
I want to compare size and name partitions d618 and d620r
Click to expand...
Click to collapse
This..
Code:
[email protected]:/ # ls -al dev/block/platform/msm_sdcc.1/by-name
lrwxrwxrwx root root 1970-03-10 07:57 DDR -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 1970-03-10 07:57 aboot -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 1970-03-10 07:57 abootb -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 1970-03-10 07:57 boot -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 1970-03-10 07:57 cache -> /dev/block/mmcblk0p33
lrwxrwxrwx root root 1970-03-10 07:57 cust -> /dev/block/mmcblk0p30
lrwxrwxrwx root root 1970-03-10 07:57 drm -> /dev/block/mmcblk0p24
lrwxrwxrwx root root 1970-03-10 07:57 eksst -> /dev/block/mmcblk0p31
lrwxrwxrwx root root 1970-03-10 07:57 encrypt -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 1970-03-10 07:57 factory -> /dev/block/mmcblk0p26
lrwxrwxrwx root root 1970-03-10 07:57 fota -> /dev/block/mmcblk0p27
lrwxrwxrwx root root 1970-03-10 07:57 fsc -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 1970-03-10 07:57 fsg -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 1970-03-10 07:57 grow -> /dev/block/mmcblk0p35
lrwxrwxrwx root root 1970-03-10 07:57 laf -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 1970-03-10 07:57 misc -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 1970-03-10 07:57 modem -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 1970-03-10 07:57 modemst1 -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 1970-03-10 07:57 modemst2 -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 1970-03-10 07:57 mpt -> /dev/block/mmcblk0p29
lrwxrwxrwx root root 1970-03-10 07:57 pad -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 1970-03-10 07:57 persist -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 1970-03-10 07:57 rct -> /dev/block/mmcblk0p23
lrwxrwxrwx root root 1970-03-10 07:57 recovery -> /dev/block/mmcblk0p17
lrwxrwxrwx root root 1970-03-10 07:57 rpm -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 1970-03-10 07:57 rpmb -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 1970-03-10 07:57 sbl1 -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 1970-03-10 07:57 sbl1b -> /dev/block/mmcblk0p28
lrwxrwxrwx root root 1970-03-10 07:57 sdi -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 1970-03-10 07:57 sns -> /dev/block/mmcblk0p25
lrwxrwxrwx root root 1970-03-10 07:57 ssd -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 1970-03-10 07:57 system -> /dev/block/mmcblk0p32
lrwxrwxrwx root root 1970-03-10 07:57 tz -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 1970-03-10 07:57 tzb -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 1970-03-10 07:57 userdata -> /dev/block/mmcblk0p34
Sent from my LG-D618 using XDA Free mobile app
I have a problem. Device: d618 Rom: CM12.1
Can someone help me? Thanks. [emoji1]
lance26 said:
I have a problem. Device: d618 Rom: CM12.1
Can someone help me? Thanks. [emoji1]
Click to expand...
Click to collapse
Try this version: https://yadi.sk/d/CXh7jR6EgbLnc
Nikita Pro Android said:
Try this version: https://yadi.sk/d/CXh7jR6EgbLnc
Click to expand...
Click to collapse
It kinda worked but now I'm stuck in a bootloop. I guess i'll just have to flash my rom again. How do I enter cwm? What button combinations?
for recovery is: hold power + vol up, when you see lg logo, release both keys and press it and hold again until you see a warning for deletion of data, select yes with volume keys and enter with power key, both times yes
sergioslk said:
for recovery is: hold power + vol up, when you see lg logo, release both keys and press it and hold again until you see a warning for deletion of data, select yes with volume keys and enter with power key, both times yes
Click to expand...
Click to collapse
It worked. Thanks
myllo.setya said:
I just ported from LG L90 to LG G2 mini d618.
Click to expand...
Click to collapse
Hi, possible to port to LG G2 D802?
Related
I know this was requested by others and here I present a list for other devs of the partition mount points for the i9205.
You can search various folders for this info but its not complete. Apps wont show the main partion points
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To get this information for your device, open up terminal emulator and enter the following
Code:
ls -al /dev/block/platform/msm_sdcc.1/by-name
Here is the code
Code:
lrwxrwxrwx root root 2013-01-17 21:07 aboot -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 2013-01-17 21:07 backup -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 2013-01-17 21:07 boot -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 2013-01-17 21:07 cache -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 2013-01-17 21:07 efs -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 2013-01-17 21:07 fota -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 2013-01-17 21:07 fsg -> /dev/block/mmcblk0p17
lrwxrwxrwx root root 2013-01-17 21:07 hidden -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 2013-01-17 21:07 modem -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 2013-01-17 21:07 modemst1 -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 2013-01-17 21:07 modemst2 -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 2013-01-17 21:07 pad -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 2013-01-17 21:07 param -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 2013-01-17 21:07 persist -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 2013-01-17 21:07 recovery -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 2013-01-17 21:07 rpm -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 2013-01-17 21:07 sbl1 -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 2013-01-17 21:07 sbl2 -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 2013-01-17 21:07 sbl3 -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 2013-01-17 21:07 ssd -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 2013-01-17 21:07 system -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 2013-01-17 21:07 tz -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 2013-01-17 21:07 userdata -> /dev/block/mmcblk0p23
Hope this helps someone
Sent from my GT-I9205 using xda premium
Thanks.
Two questions please:
- The LTE modem is installed on 3 partitions? Odin know this, work well?
- A Rom have also "persist.img.ext4" and "tz.mbn". Wath is this, a booloader?
At the moment installing new lte modems is a no go, its a known problem on the s4 thread and people over at darkys are working on it.
odin is samsungs software so stock packages will be ok, currently ive left modem out of the custom rom for now
thering1975 said:
At the moment installing new lte modems is a no go, its a known problem on the s4 thread and people over at darkys are working on it.
Click to expand...
Click to collapse
The S4 have the modem.bin from 52,... MB and NON-HLOS.bin from 9,... MB.
The Mega have only NON-HLOS.bin from 49,... MB. Are different.
I flashed the Odex Rom XXUAMG3 by Odin and the 4G work well whit new modem.
thats correct it will with odin yes, but not in cwm hence why most 4g s4 roms leave out the modem
taken from the s4 lte modem thread
CWM/TWRP flashable modems for Samsung Galaxy S4 LTE - GT-I9505
At the moment it is IMPOSSIBLE to flash ANY modem for I9505 through ANY Custom Recovery!
Click to expand...
Click to collapse
thering1975 said:
thats correct it will with odin yes, but not in cwm hence why most 4g s4 roms leave out the modem
Click to expand...
Click to collapse
Alright. I understood now.
Thank You
EDIT: In this case, for new Rom's we can extract the modem, make a .tar.md5 and flash by Odin. Work it, like this?
Only one way to find out lol
Anyone with the I9200 done this yet as i need to verify before i can start building for the I9200
thering1975 said:
Anyone with the I9200 done this yet as i need to verify before i can start building for the I9200
Click to expand...
Click to collapse
Here is my result from i9200 in attachment...
Excellent thanks I can start work on a rom ta
Sent from my GT-I9205 using xda premium
actually what base rom are you on
Right now i'm on I9200XXUAMEE
Sent from my GT-I9200 using xda app-developers app
hey guys,
can someone give me the exact mount point from the internal and external sdcard please
it's for 9205
thanks in advance
sent from my G-Note
To copy something to sdcard you dont need to mount so to speak in cwm
Just extraxt to /sdcard
Sent from my GT-I9205 using xda premium
no no,
I have to know the exact mount points for my uft zips that the battery icons will be flashed correctly
Kangburra posted yesterday a mount point for the internal sd but it is the path for the external
now I only have to know that correct path for the internal,
then it doesn't matter from which one the people flash the zips
sent from my G-Note
hara74 said:
no no,
I have to know the exact mount points for my uft zips that the battery icons will be flashed correctly
Kangburra posted yesterday a mount point for the internal sd but it is the path for the external
now I only have to know that correct path for the internal,
then it doesn't matter from which one the people flash the zips
Click to expand...
Click to collapse
Here You have the mobileodin.txt made by MobileOdin to send to Chainfire to make compatibility from i9205 whit MO.
From Stock Rom Sammobile XXUAMG4. You have here all about partitions, sizes and more info.
I hope this will useful.
hi, i need a i9205 pit file.
it's not working nomal booting - encryption failed
i tried factory reset but error - can't mount /data,
please, help me.
Hi,
Anyone knows which partition holds the bootloader?
treare said:
Hi,
Anyone knows which partition holds the bootloader?
Click to expand...
Click to collapse
Its normaly sbl. But as we have 3 i not sure
Sent from my GT-I9205 using XDA Premium 4 mobile app
This partition apparently holds the IMEI (well on the Moto G 2013 it does) but I don't even see that it exists on this phone (xt1527). I can't seem to make a backup of it but the phone works so, is it even there or have they changed how it works?
bump, same issue
seems a bunch of us have this issue.
sad there seems to be no answer anywhere..
edit:
here is what i got listing partitions.
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
[email protected]_umts:/ $ su
[email protected]_umts:/ # ls -l /dev/block/platform/msm_sdcc.1/by-name/
lrwxrwxrwx root root 1970-06-10 11:47 DDR -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 1970-06-10 11:47 aboot -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 1970-06-10 11:47 abootBackup -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 1970-06-10 11:47 boot -> /dev/block/mmcblk0p33
lrwxrwxrwx root root 1970-06-10 11:47 cache -> /dev/block/mmcblk0p43
lrwxrwxrwx root root 1970-06-10 11:47 carrier -> /dev/block/mmcblk0p41
lrwxrwxrwx root root 1970-06-10 11:47 cid -> /dev/block/mmcblk0p28
lrwxrwxrwx root root 1970-06-10 11:47 clogo -> /dev/block/mmcblk0p30
lrwxrwxrwx root root 1970-06-10 11:47 dhob -> /dev/block/mmcblk0p24
lrwxrwxrwx root root 1970-06-10 11:47 factorytune1 -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 1970-06-10 11:47 factorytune2 -> /dev/block/mmcblk0p35
lrwxrwxrwx root root 1970-06-10 11:47 frp -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 1970-06-10 11:47 fsc -> /dev/block/mmcblk0p26
lrwxrwxrwx root root 1970-06-10 11:47 fsg -> /dev/block/mmcblk0p25
lrwxrwxrwx root root 1970-06-10 11:47 hob -> /dev/block/mmcblk0p23
lrwxrwxrwx root root 1970-06-10 11:47 hyp -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 1970-06-10 11:47 hypBackup -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 1970-06-10 11:47 keystore -> /dev/block/mmcblk0p39
lrwxrwxrwx root root 1970-06-10 11:47 kpan -> /dev/block/mmcblk0p36
lrwxrwxrwx root root 1970-06-10 11:47 logo -> /dev/block/mmcblk0p29
lrwxrwxrwx root root 1970-06-10 11:47 logs -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 1970-06-10 11:47 metadata -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 1970-06-10 11:47 misc -> /dev/block/mmcblk0p32
lrwxrwxrwx root root 1970-06-10 11:47 modem -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 1970-06-10 11:47 modemst1 -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 1970-06-10 11:47 modemst2 -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 1970-06-10 11:47 oem -> /dev/block/mmcblk0p40
lrwxrwxrwx root root 1970-06-10 11:47 padA -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 1970-06-10 11:47 padB -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 1970-06-10 11:47 padC -> /dev/block/mmcblk0p37
lrwxrwxrwx root root 1970-06-10 11:47 persist -> /dev/block/mmcblk0p31
lrwxrwxrwx root root 1970-06-10 11:47 recovery -> /dev/block/mmcblk0p34
lrwxrwxrwx root root 1970-06-10 11:47 rpm -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 1970-06-10 11:47 rpmBackup -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 1970-06-10 11:47 sbl1 -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 1970-06-10 11:47 sec -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 1970-06-10 11:47 sp -> /dev/block/mmcblk0p38
lrwxrwxrwx root root 1970-06-10 11:47 ssd -> /dev/block/mmcblk0p27
lrwxrwxrwx root root 1970-06-10 11:47 system -> /dev/block/mmcblk0p42
lrwxrwxrwx root root 1970-06-10 11:47 tz -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 1970-06-10 11:47 tzBackup -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 1970-06-10 11:47 userdata -> /dev/block/mmcblk0p44
lrwxrwxrwx root root 1970-06-10 11:47 utags -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 1970-06-10 11:47 utagsBackup -> /dev/block/mmcblk0p17
[email protected]_umts:/ #
Not up to speed on this device yet but it seems to me that if you know where the PDS partition is from a terminal you should be able to use a form like:
dd if=/dev/block/mmcblk??? of=pds.img
provided your current working directory has enough room in it to hold the .img file
conductive said:
Not up to speed on this device yet but it seems to me that if you know where the PDS partition is from a terminal you should be able to use a form like:
dd if=/dev/block/mmcblk??? of=pds.img
provided your current working directory has enough room in it to hold the .img file
Click to expand...
Click to collapse
on another phone it's mmcblk12 (i have been doing a LOT of searching on this)
i looked at the root folder on my phone and i see a shortcut to "pds"
when i open it it's empty.
i have some experience with Linux but i am no pro and it's been a while for my nix activity.
and i have almost no experience with Android.
i am good with computer stuff though. cracking, coding reversing, graphics etc.
i love modding everything i can.
i say that to give a bit of context to this..
if anyone else has any idea or leads on what i can do or where to look i am all ears.
i posted that partition command because i found it on Google
and i remember using it (ls) before trouble shooting driver issues on Linux in the past.
you guys will notice the console log i posted does not list a pds partition by-name..
is it because it's not mounted maybe ? or is it using a different name on this phone ?
i'd love to try and update to 5.1 (from 5.0..2) on my Telus XT1527 but i think it's time i make a PDS backup before i carry on any further.. so far i have installed a custom kernel and TWRP + root.
So i can't continue until i figure out a way to back that stuff up (irresponsible otherwise i think)
Based on this post http://forum.xda-developers.com/showthread.php?t=1138220 the OS uses /dev/block/mmcblk0p3 and it was dumped to the /tmp directory.
from here you can use dd to flash it to an sd card where you can read it to see if it has pds information. You can also use (mount -a) to mount all partitions and do another ls -l
conductive said:
Based on this post http://forum.xda-developers.com/showthread.php?t=1138220 the OS uses /dev/block/mmcblk0p3 and it was dumped to the /tmp directory.
from here you can use dd to flash it to an sd card where you can read it to see if it has pds information. You can also use (mount -a) to mount all partitions and do another ls -l
Click to expand...
Click to collapse
That says Atrix though and on another posting i found it was mmcblk0p12
If you look at the log i posted earlier that number mmcblk0p3 is mapped to DDR
I have been dumping the partitions and checking them (if the file size is roughly correct)
I heard it was suppose to be about 8mb as an .img on another device.
and i have one downloaded as an image and extracted (some other guys data)
so if i find the files on my phone i think i can match them to my downloaded files.
i also got a windows tool to extract the images ready..
One last thing i said i seen a shortcut to "pds" on the filesystem of my Telus XT1527
so i take it that it's there just that i can't see it or something.
I'm basically poking around in the dark LOL
edit:
oh and i seen on other phones that pds partition can be backed up with TWRP.
The TWRP i have installed does not show it for me (i am using Squid's TWRP)
The partitions are probably associated with the OS version and not the hardware so you should probably compare your version to a similar version.
If you can find fstab file you should be able to (cat fstab) and see what the partitions are mounted as.
The partition should be mounted or else your device will not work.
I've modded fstab on linux before but i am not finding it i think on the XT1527
found a couple with "fstab" in the title and it don't say much..
just one line about mounting the sdcard.
Thanks but i am lost.. i wonder how it's created because it's prob not files in the Firmware package right ?
So then i'd have to assume the contents of PDS would be created on the phones first boot maybe.
i don't know what else to do really i am going around in circles ..i might just say screw it and give up.
too bad guys here who DO have the ability to find it can't help
100% of Moto-E users seem to carry on flashing their phones with out it
so i take it backing up the PDS is pointless ?
Just kind of dumb i see tutorials on how to do it all over but no one can claim it actually works LOL
If you google it you will see what i am saying (people tell you to you to do it becuase it's sooooo important..
then it doesn't work ahahaha
thanks for your help conductive.
edit:
Oh and guys.. i tried to do this because... Q13:
http://forum.xda-developers.com/moto-e-2015/help/faq-frequently-questions-moto-e-2015-t3044929
The stickied topic here tells us all how to do it.
..but did anyone at all bother to verify it actually works ?
Ok so i think i got it.. sort of.
I installed "Root Explorer Pro" and when i opened it this time it showed files/folders.
I then selected .zip it up and copied it manually to my sdcard then to my PC.
I have been hex viewing the contents with UltraEdit and the files contain data.
I also compared to a pds dump from an Atrix and they are some what similar.
I did see a reference in one of the root config files about the pds partition though..
I can't recall which file it was but it said something about
setting the dummy directory "pds" as persistent.
I don't know what is going on but i got the content off the phone i think.
edit:
Here is what the root of that folder looked like (folder names)
Code:
.bt_nv.bin
batt_health
bt
camera
data
factory
lost+found
public
security
WCNSS_wlan_dictionary.dat
wifi
wmdrm
This is my phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the phone I just bought for my mother:
Bought less than a week from each other. Same phone, different android versions- mine Android 4.4.4 and hers is Android 5.1.
How can I upgrade mine to 5.1? Upgrade button in the settings menu returns the server is unreachable.
bump
bump
BUMP
Do you have a data connection on your phone (mobile data or WiFi)? Same carrier?
augie7107 said:
Do you have a data connection on your phone (mobile data or WiFi)? Same carrier?
Click to expand...
Click to collapse
Yes. Everything is the same.
Both purchased at Walmart.
Both on Straight Talk.
Both used Mobile and WiFi without any problems.
BUMP
Bump
There is no way to update via pc. Look up ZTE USA service number and give them a call. They will connect you with tech support to get it sorted.
Did you ever get this sorted out? I just bought the same phone and it came with 4.4.4. Called ZTE and they said there's no update for this phone yet
Ive got a zte z936l I can obtain a temp root on it with king root but I think its unstabe can't seem to flash a custom
If you want to root this phone, you need to obtain temp root and dump your entire ROM to a safe place, like a computer. Then SWAP boot and recovery. And boot the ROM via recovery buttons. This will give you full root but when youre done using it you newd to switch boot and recovery back. ZTE is known for their system lockdown and this way circumvents it. If you can obtain the 5.1.1 bootstack from your moms phone via temp root and using dd commands to dump we can ALL have 5.1. All we will need is a twrp build.
bichofelix said:
If you want to root this phone, you need to obtain temp root and dump your entire ROM to a safe place, like a computer. Then SWAP boot and recovery. And boot the ROM via recovery buttons. This will give you full root but when youre done using it you newd to switch boot and recovery back. ZTE is known for their system lockdown and this way circumvents it. If you can obtain the 5.1.1 bootstack from your moms phone via temp root and using dd commands to dump we can ALL have 5.1. All we will need is a twrp build.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=63578570&postcount=11
I seen this above post. Full root can be gained if instructions are followed. Can you confirm this? I may just email them and pit in the request for both of the zte lever phones here in the house.
As for following your instructions, I'd have no issue doing as you say and providing 5.1 for xda. I'd prefer some more detailed instructions and possibly a irc/messaging platform for instant communication.
After temp root, open terminal and dump everything in "dev/block/bootdevice/by-name/" with dd commands onto your sdcard or PC. (dd if=/path/to/partition of=/dump/location/filename)
From there we decompile the candidates for boot and recovery and once we know which is which, they can be swapped. Then you reboot and obtain temp root again, which this time it should give you full root. When you're done using it, just swap them back and reboot.
I'm not sure about that guy saying you can just unlock bootloader because even with twrp the system will have ro lock on it unless boot and recovery are swapped. Look at the zmax if you're curious how it works.
bichofelix said:
After temp root, open terminal and dump everything in "dev/block/bootdevice/by-name/" with dd commands onto your sdcard or PC. (dd if=/path/to/partition of=/dump/location/filename)
From there we decompile the candidates for boot and recovery and once we know which is which, they can be swapped. Then you reboot and obtain temp root again, which this time it should give you full root. When you're done using it, just swap them back and reboot.
I'm not sure about that guy saying you can just unlock bootloader because even with twrp the system will have ro lock on it unless boot and recovery are swapped. Look at the zmax if you're curious how it works.
Click to expand...
Click to collapse
ZMAX?
I am installing ADB now and will follow these instructions the best I can.
Team Win Recovery Project (TWRP), they do not show my device so which one is it that I need? That link I posted about root and boot loader codes, he shows 2.8.70 and the closest device I see is the ZTE Blade.
The fella you replied to said he could get temp root with king root.
bichofelix said:
After temp root, open terminal and dump everything in "dev/block/bootdevice/by-name/" with dd commands onto your sdcard or PC. (dd if=/path/to/partition of=/dump/location/filename)
Click to expand...
Click to collapse
I have done it.
Now to do the rest. I am not sure what file types I should name them all though.
Humphrey1989 said:
I have done it.
Now to do the rest. I am not sure what file types I should name them all though.
Click to expand...
Click to collapse
They are all .img files except a few. You may simply leave them blank.
As for twrp, somebody has to actually build it for our device. We currently have none.
Once the partitions are all dumped, please zip them and link me.
There should also be a fastboot mode we have access to, if we do, we can all simply flash the lollipop bootstack.
bichofelix said:
There should also be a fastboot mode we have access to, if we do, we can all simply flash the lollipop bootstack.
Click to expand...
Click to collapse
I tried >fastboot devices and it didn't show any.
I have restarted my phone once or twice after kingroot and it seems that I have perm root if I read the below right.
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ # su
/system/bin/sh: su: not found
127|[email protected]:/ # id
uid=0(root) gid=0(root) context=u:r:shell:s0
[email protected]:/ #
This is what I have and while be making copies of:
Code:
[email protected]:/dev/block/bootdevice/by-name # ls -l
lrwxrwxrwx root root 1970-04-01 08:25 DDR -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 1970-04-01 08:25 aboot -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 1970-04-01 08:25 abootbak -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 1970-04-01 08:25 boot -> /dev/block/mmcblk0p23
lrwxrwxrwx root root 1970-04-01 08:25 cache -> /dev/block/mmcblk0p30
lrwxrwxrwx root root 1970-04-01 08:25 config -> /dev/block/mmcblk0p28
lrwxrwxrwx root root 1970-04-01 08:25 fsc -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 1970-04-01 08:25 fsg -> /dev/block/mmcblk0p17
lrwxrwxrwx root root 1970-04-01 08:25 hyp -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 1970-04-01 08:25 hypbak -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 1970-04-01 08:25 keystore -> /dev/block/mmcblk0p27
lrwxrwxrwx root root 1970-04-01 08:25 misc -> /dev/block/mmcblk0p26
lrwxrwxrwx root root 1970-04-01 08:25 modem -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 1970-04-01 08:25 modemst1 -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 1970-04-01 08:25 modemst2 -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 1970-04-01 08:25 oem -> /dev/block/mmcblk0p29
lrwxrwxrwx root root 1970-04-01 08:25 pad -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 1970-04-01 08:25 persist -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 1970-04-01 08:25 recovery -> /dev/block/mmcblk0p24
lrwxrwxrwx root root 1970-04-01 08:25 rpm -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 1970-04-01 08:25 rpmbak -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 1970-04-01 08:25 sbl1 -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 1970-04-01 08:25 sbl1bak -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 1970-04-01 08:25 sec -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 1970-04-01 08:25 splash -> /dev/block/mmcblk0p25
lrwxrwxrwx root root 1970-04-01 08:25 ssd -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 1970-04-01 08:25 system -> /dev/block/mmcblk0p31
lrwxrwxrwx root root 1970-04-01 08:25 tz -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 1970-04-01 08:25 tzbak -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 1970-04-01 08:25 userdata -> /dev/block/mmcblk0p32
lrwxrwxrwx root root 1970-04-01 08:25 ztecfg -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 1970-04-01 08:25 ztelk -> /dev/block/mmcblk0p11
[email protected]:/dev/block/bootdevice/by-name #
Humphrey1989 said:
I tried >fastboot devices and it didn't show any.
I have restarted my phone once or twice after kingroot and it seems that I have perm root if I read the below right.
This is what I have and while be making copies of:
Click to expand...
Click to collapse
Oh **** yeah they're named. Zte has been known to only use /by-num/.
For fastboot to work you will need the fastboot drivers installed. Not sure if it uses the standard fastboot drivers or its own so Google might help. Try the ones in the zmax forum. You're the guy with lollipop, right?
bichofelix said:
You're the guy with lollipop, right?
Click to expand...
Click to collapse
lollipop? As in Android 5.1 on a ZTE LEVER LTE? Yes I am that guy. Right now I am doing all this on my phone which is 4.4.4 and then I will perform the same on the 5.1 ZTE LEVER LTE.
STOCK FIRMWARE FOR E2303 FLASHABLE ZIP
UPDATE: Uploading because this time IT WORK! Thanks to @TheVektor for updater-script! But this isn't pre-rooted, because it not flash SuperSU. But it's still awesome because if you have problems with flashmode or other you can flash this as a recovery zip! Tested on E2303 with TWRP. Made with PRFCreator
alby_var said:
STOCK PRE-ROOTED FIRMWARE FOR E2303 FLASHABLE ZIP
Hey guys! I had a problem entering flashmode and the only way for unbrick my phone was enter into recovery/flash a zip or fastboot flash.
For this, i made a pre-rooted firmware with PRFcreator. Now I am testing it. It will not install a recovery because xzdualrecovery is not compatible with our device. That means you have to flash it manually before start installing this.
STATUS: RECOVERY NOT INSTALL ZIP FILE....
Download: testing and uploading...
Click to expand...
Click to collapse
Hey! I'm interested in this ROM, my device has a locked bootloader and I think this would solve out the issue of rooting without unlocking the bootloader. I can test the ROM. My model is: E2306
Do you have any finished projects?
Quien mucho abarca poco aprieta
rascayus said:
Quien mucho abarca poco aprieta
Click to expand...
Click to collapse
English please
Don'te bite more than you can chew
I think every thread you have created is pointless. "Uploading"... yeah great.
Maybe get something uploaded first, then create a thread instead of having multiple threads that are pointless...
I respect your efforts but still
Guys, the rom are completed, the problem is that we haven't a working updater-script file. It is needed for flash roms, and I am working to make one that work. I can upload the rom and give you the link, but if it not flash, where is the sense in that?
Code:
if
run_program("/tmp/busybox", "ls", "/dev/block/platform/msm_sdcc.1/by-uuid/F9CDF7BA-B834-A72A-F1C9-D6E0C0983896") != "0"
then
abort("Error: UUID link to system partition does not exist");
endif;
assert(package_extract_file("system.ext4", "/dev/block/platform/msm_sdcc.1/by-uuid/F9CDF7BA-B834-A72A-F1C9-D6E0C0983896"));
M4 Aqua (E2303) does not have "msm_sdcc.1" and "by-uuid" folders or whatever is it....
We have MMC device partitions:
Code:
lrwxrwxrwx root root 1970-02-06 11:48 DDR -> /dev/block/mmcblk0p23
lrwxrwxrwx root root 1970-02-06 11:48 FOTAKernel -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 1970-02-06 11:48 LTALabel -> /dev/block/mmcblk0p25
lrwxrwxrwx root root 1970-02-06 11:48 TA -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 1970-02-06 11:48 aboot -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 1970-02-06 11:48 alt_aboot -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 1970-02-06 11:48 alt_hyp -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 1970-02-06 11:48 alt_rpm -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 1970-02-06 11:48 alt_s1sbl -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 1970-02-06 11:48 alt_sbl1 -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 1970-02-06 11:48 alt_tz -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 1970-02-06 11:48 apps_log -> /dev/block/mmcblk0p26
lrwxrwxrwx root root 1970-02-06 11:48 boot -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 1970-02-06 11:48 cache -> /dev/block/mmcblk0p28
lrwxrwxrwx root root 1970-02-06 11:48 config -> /dev/block/mmcblk0p24
lrwxrwxrwx root root 1970-02-06 11:48 fsg -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 1970-02-06 11:48 hyp -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 1970-02-06 11:48 modem -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 1970-02-06 11:48 modemst1 -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 1970-02-06 11:48 modemst2 -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 1970-02-06 11:48 oem -> /dev/block/mmcblk0p27
lrwxrwxrwx root root 1970-02-06 11:48 persist -> /dev/block/mmcblk0p17
lrwxrwxrwx root root 1970-02-06 11:48 rdimage -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 1970-02-06 11:48 rpm -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 1970-02-06 11:48 s1sbl -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 1970-02-06 11:48 sbl1 -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 1970-02-06 11:48 ssd -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 1970-02-06 11:48 system -> /dev/block/mmcblk0p30
lrwxrwxrwx root root 1970-02-06 11:48 tz -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 1970-02-06 11:48 userdata -> /dev/block/mmcblk0p29
So we need create updater-script using similar formats:
Code:
run_program("/tmp/busybox", "ls", "/dev/block/mmcblk0p30") != "0"
AND
assert(package_extract_file("system.ext4", "/dev/block/mmcblk0p30"));
Im not 100% sure this is the problem, but i hope it can help for you.
Edit:
OK! zip flashing finished (system flashed!), but supersu not installed by updater-script... idk why.
My updater-script: http://pastebin.com/8Lg7UseV
Ohh! Really Really Really thank you!! Now i can unbrick my phone and finally complete the roms!
alby_var said:
STOCK FIRMWARE FOR E2303 FLASHABLE ZIP
UPDATE: Uploading because this time IT WORK! Thanks to @TheVektor for updater-script! But this isn't pre-rooted, because it not flash SuperSU. But it's still awesome because if you have problems with flashmode or other you can flash this as a recovery zip! Tested on E2303 with TWRP. Made with PRFCreator
Click to expand...
Click to collapse
Its flashable zip too... not important pre-rooted or not after flashing is done, simple you can install supersu.zip too. :good:
But You try to build pre rooted Rom?
Wysłane z mojego E2303 przy użyciu Tapatalka
Later I will try to make a flashable working prerooted, tomorrow i will upload it ( i tried today but still at 60% uploading) but for now I will complete de-bloated and other projects....
Ok, I uploaded to Mediafire but it not give me the link.... I am uploading again to Mega and its at 30%
alby_var said:
Ok, I uploaded to Mediafire but it not give me the link.... I am uploading again to Mega and its at 30%
Click to expand...
Click to collapse
And ?? Can you upload pre rooted Rom ?
I not successfully can upload it. All hosting websites stop uploading or still for 2-3 days and i have to shut down pc.
Upload it to google drive and share link,ty
Stock firmware for e2303 flashable zip
Link?
26.1.a.2.167/r12a
Can someone explain what means R12A in 26.1.A.2.167/R12A ?
so, does anybody have this flashable stock rom? I could really use it right now...
Hey, so I got the new Gionee M6S Plus from China and was having problems trying to use Google Play (downloaded by apk). I also downloaded the Google Play Services apk and ran that (if I didn't, Google Play wouldn't even open). But whenever I try to open Google Play, it only shows the white loading screen and seems to "freeze" on the white screen. Also, I keep getting errors messages about "Google Play Services has stopped" messages and was wondering if that was related.
Thanks
WhyChineseAndroidWhy said:
Hey, so I got the new Gionee M6S Plus from China and was having problems trying to use Google Play (downloaded by apk). I also downloaded the Google Play Services apk and ran that (if I didn't, Google Play wouldn't even open). But whenever I try to open Google Play, it only shows the white loading screen and seems to "freeze" on the white screen. Also, I keep getting errors messages about "Google Play Services has stopped" messages and was wondering if that was related.
Thanks
Click to expand...
Click to collapse
U will need to install cwm and flash gapps according to ur Android version
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
U will need to install cwm and flash gapps according to ur Android version
when you say android version, does this mean like Android 6.0 or the Amigos 3.5 firmware its running?
Thanks
Click to expand...
Click to collapse
WhyChineseAndroidWhy said:
Brandon Indar said:
U will need to install cwm and flash gapps according to ur Android version
when you say android version, does this mean like Android 6.0 or the Amigos 3.5 firmware its running?
Thanks
Click to expand...
Click to collapse
Android 6.0
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Brandon Indar said:
WhyChineseAndroidWhy said:
Android 6.0
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
This made be a dumb question, but what is cwm? and where can I find resources on cwm and flash gapps for Android 6.0? Also does this require root?
Thanks
Click to expand...
Click to collapse
Gionee M6S Plus -Need help in installing google apps
Hi ,
I am also facing the same problem . I also have bought Chinese version gionee m6s plus and want to install gapps. I have also tried installing apks like service framework,account manager,play store but in vain and it crashes every time I open . I want to root this phone only to install gapps. Can any one please post the link or help as how to root this version of phone ?
Thanks
Hi just send me ur recovery and boot.img I can port cwm recovery so u guys can flash gapps.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi just send me ur recovery and boot.img I can port cwm recovery so u guys can flash gapps.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Hi Brandaon thanks for your reply.I am a noob in this and need further help. I used following link https://forum.xda-developers.com/showthread.php?t=2027311 to get recovery image.However I am getting error when I run the command
cat proc/mtd
/system/bin/sh: cat: proc/mtd: No such file or directory
Suhi02 said:
Hi Brandaon thanks for your reply.I am a noob in this and need further help. I used following link https://forum.xda-developers.com/showthread.php?t=2027311 to get recovery image.However I am getting error when I run the command
cat proc/mtd
/system/bin/sh: cat: proc/mtd: No such file or directory
Click to expand...
Click to collapse
U can Google ur device and see if there is a stock frimware and send me a link.
Sent from my ONE A2005 using Tapatalk
Hi I found following link
Its not allowing to post the link URL hence typing in below format
https front slash www dot amigo dot cn front slash mobile.php?id=83&mobile=1
It is 64 gb rom black color phone. With the help of google translator I can see it says Download and brush tutorials. My device is running on marshmallow 6.0.1, Amigo version 3.5.3 ,secure version 1.2.a. Does this help you ?
Thanks
Boot Image for M6S PLUS
Brandon Indar said:
Hi just send me ur recovery and boot.img I can port cwm recovery so u guys can flash gapps.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
HI I have attached boot.img file. However I couldn't get recovery img file yet.
Thanks
Suhi02 said:
HI I have attached boot.img file. However I couldn't get recovery img file yet.
Thanks
Click to expand...
Click to collapse
I will need recovery.img too because i will need to post cwm recovery so u can flash the super su zip and get root.
See if u can get ur device firmware online and send me link
Thanks
Brandon Indar said:
I will need recovery.img too because i will need to post cwm recovery so u can flash the super su zip and get root.
See if u can get ur device firmware online and send me link
Thanks
Click to expand...
Click to collapse
Hi , please find following link. It says 2.3GB as size. Is this what is required ?
https://www.amigo.cn/mobile.php?id=83&mobile=1
Thanks a lot
Brandon Indar said:
I will need recovery.img too because i will need to post cwm recovery so u can flash the super su zip and get root.
See if u can get ur device firmware online and send me link
Thanks
Click to expand...
Click to collapse
Hi just like miracle box which is for mediatek devices ,Do we have any such software for snapdragon devices , so that I can read and extract boot image and recovery image without root ?
Thanks
Please help to get recovery file on PC or access it
Brandon Indar said:
I will need recovery.img too because i will need to post cwm recovery so u can flash the super su zip and get root.
See if u can get ur device firmware online and send me link
Thanks
Click to expand...
Click to collapse
HI I am able to get root access from kingroot. But it says it is temporary and after restart will loose the root. I was able to get image file . However I cannot access those files
127|[email protected]_G1602A:/storage/emulated/0 # ls
lmms
qmt
qqsecure
qt
recovery.img
I have extracted recovery image file this is the recovery.img file using dd if=/dev/block/mmcblk0p22 of=/sdcard/recovery.img. However I cannot copy to my pc and sdcard. It is not visible via explorer too. But the file is there. Can you please help me . I tried adb pull /Sdcard/ but it says adb not found. Please help. Thanks
Which files should I extract for boot and recovery image ?
HI ,
I have following thing. Thanks in advance.I have temporarily got root access till i restart my device via kingroot. If not can you please tell me step by step , so that I can sideload gapps and set permissions using root explorer to google play store and other files ? If I give permissions and restart my device will I be able to boot up properly or get stuck ?Because it has locked bootloader and any changes it finds I think it reverts to original stock rom Thanks in advance
Please let me know which one should I extract from the below list? There are 2 files aboot which is of 10 MB and other boot is 65MB. Recovery file also seems to be of 65MB.
lrwxrwxrwx root root 1970-06-06 11:56 DDR -> /dev/block/mmcblk0p15
lrwxrwxrwx root root 1970-06-06 11:56 aboot -> /dev/block/mmcblk0p19
lrwxrwxrwx root root 1970-06-06 11:56 abootbak -> /dev/block/mmcblk0p20
lrwxrwxrwx root root 1970-06-06 11:56 apdp -> /dev/block/mmcblk0p43
lrwxrwxrwx root root 1970-06-06 11:56 boot -> /dev/block/mmcblk0p21
lrwxrwxrwx root root 1970-06-06 11:56 cache -> /dev/block/mmcblk0p25
lrwxrwxrwx root root 1970-06-06 11:56 cmnlib -> /dev/block/mmcblk0p37
lrwxrwxrwx root root 1970-06-06 11:56 cmnlib64 -> /dev/block/mmcblk0p39
lrwxrwxrwx root root 1970-06-06 11:56 cmnlib64bak -> /dev/block/mmcblk0p40
lrwxrwxrwx root root 1970-06-06 11:56 cmnlibbak -> /dev/block/mmcblk0p38
lrwxrwxrwx root root 1970-06-06 11:56 config -> /dev/block/mmcblk0p29
lrwxrwxrwx root root 1970-06-06 11:56 devcfg -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 1970-06-06 11:56 devcfgbak -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 1970-06-06 11:56 devinfo -> /dev/block/mmcblk0p23
lrwxrwxrwx root root 1970-06-06 11:56 dip -> /dev/block/mmcblk0p33
lrwxrwxrwx root root 1970-06-06 11:56 dpo -> /dev/block/mmcblk0p45
lrwxrwxrwx root root 1970-06-06 11:56 dsp -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 1970-06-06 11:56 fsc -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 1970-06-06 11:56 fsg -> /dev/block/mmcblk0p16
lrwxrwxrwx root root 1970-06-06 11:56 keymaster -> /dev/block/mmcblk0p41
lrwxrwxrwx root root 1970-06-06 11:56 keymasterbak -> /dev/block/mmcblk0p42
lrwxrwxrwx root root 1970-06-06 11:56 keystore -> /dev/block/mmcblk0p28
lrwxrwxrwx root root 1970-06-06 11:56 limits -> /dev/block/mmcblk0p31
lrwxrwxrwx root root 1970-06-06 11:56 mcfg -> /dev/block/mmcblk0p36
lrwxrwxrwx root root 1970-06-06 11:56 mdtp -> /dev/block/mmcblk0p34
lrwxrwxrwx root root 1970-06-06 11:56 misc -> /dev/block/mmcblk0p27
lrwxrwxrwx root root 1970-06-06 11:56 modem -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 1970-06-06 11:56 modemst1 -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 1970-06-06 11:56 modemst2 -> /dev/block/mmcblk0p14
lrwxrwxrwx root root 1970-06-06 11:56 mota -> /dev/block/mmcblk0p32
lrwxrwxrwx root root 1970-06-06 11:56 msadp -> /dev/block/mmcblk0p44
lrwxrwxrwx root root 1970-06-06 11:56 oem -> /dev/block/mmcblk0p30
lrwxrwxrwx root root 1970-06-06 11:56 persist -> /dev/block/mmcblk0p26
lrwxrwxrwx root root 1970-06-06 11:56 recovery -> /dev/block/mmcblk0p22
lrwxrwxrwx root root 1970-06-06 11:56 rpm -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 1970-06-06 11:56 rpmbak -> /dev/block/mmcblk0p7
lrwxrwxrwx root root 1970-06-06 11:56 sbl1 -> /dev/block/mmcblk0p4
lrwxrwxrwx root root 1970-06-06 11:56 sbl1bak -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 1970-06-06 11:56 sec -> /dev/block/mmcblk0p17
lrwxrwxrwx root root 1970-06-06 11:56 splash -> /dev/block/mmcblk0p18
lrwxrwxrwx root root 1970-06-06 11:56 ssd -> /dev/block/mmcblk0p3
lrwxrwxrwx root root 1970-06-06 11:56 syscfg -> /dev/block/mmcblk0p35
lrwxrwxrwx root root 1970-06-06 11:56 system -> /dev/block/mmcblk0p24
lrwxrwxrwx root root 1970-06-06 11:56 tz -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 1970-06-06 11:56 tzbak -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 1970-06-06 11:56 userdata -> /dev/block/mmcblk0p46
Boot and recovery file
Brandon Indar said:
Hi just send me ur recovery and boot.img I can port cwm recovery so u guys can flash gapps.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Hi ,
After phone got restarted root was lost. My bootloader is still in unlocked state.
Please find recovery image and boot image link. Please help me to install google apps.
Recovery image URL = https://ufile.io/y88gt
Boot image URL = https://ufile.io/sk85f
Kindly do the needful.
Thanks
Hi, It seems my bootloader is unlocked .I tried fastboot oem unlock-go
c:\adb>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.000s]
finished. total time: 0.000s
I have attached boot image and recovery file image in the previous post
Recovery image URL = https://ufile.io/y88gt
Boot image URL = https://ufile.io/sk85f
Please help me to install google apps. Thanks