If anyone could enable the sharpness menu in manual and RAW camera mode, that would be a killer feature!
That would make this phone killer, absolutely killer. Should be one single hex/framework edit.
The auto-sharpen is awful and should not be on by default in Manual or Raw mode. Manual mode (the big "M" when you click the Camera logo in the settings within the camera) lets you change focus, contrast, zoom, exposure time, but not sharpness (?!) even though sharpness can be adjusted in the "Auto" camera. Very bad oversight, HTC! Hoping you can mod this fixed, ungray the menu.
Another nice camera tweak would be to enable ISO from 50, 75, 150 in the ISO slider (manual/RAW) and exposure time >2 seconds for those night-time scenes and light painting, etc.
But just that sharpness thing would be miraculous, thanks!
curiousGeorge said:
If anyone could enable the sharpness menu in manual and RAW camera mode, that would be a killer feature!
That would make this phone killer, absolutely killer. Should be one single hex/framework edit.
The auto-sharpen is awful and should not be on by default in Manual or Raw mode. Manual mode (the big "M" when you click the Camera logo in the settings within the camera) lets you change focus, contrast, zoom, exposure time, but not sharpness (?!) even though sharpness can be adjusted in the "Auto" camera. Very bad oversight, HTC! Hoping you can mod this fixed, ungray the menu.
Another nice camera tweak would be to enable ISO from 50, 75, 150 in the ISO slider (manual/RAW) and exposure time >2 seconds for those night-time scenes and light painting, etc.
But just that sharpness thing would be miraculous, thanks!
Click to expand...
Click to collapse
Could a moderator move this thread where it belongs? I'm not sure this is the right place for this.
That would or could be a great mod.
Sent from my 0PJA2 using Tapatalk
Related
Since the SGSII has a pretty good camera I was wondering if it is possible to manually lock exposure, shutter and ISO settings?
With a full HD resolution I would like to get some nice filming done but without the camera automatically adjusting settings. It ruins the look.
Maybe there is already software out there which I havent found?
Cheers!
Sent from Desktop PC.
The main thing is seems that you'll want to do is to manually adjust the white balance rather than keeping that on Auto.
Exposure lock: There's no exposure lock. However, you can manually adjust the exposure value. So if you want to shoot something bright, you can lower it. If you want to shoot something dark, you can increase it.
Shutter speed. There's no way to manually adjust the shutter speed. (So you can't capture something like a waterfall with slow shutter speed to get the motion effect.) Like most non-DSLR cams, the shutter speed is automatically adjusted depending on lighting conditions, flash, and ISO.
ISO. Yes, ISO can be manually adjusted.
The cam is great and can probably replace most people's dedicated point&shoot cams. But it's definitely not as versatile as even a budget DSLR cam.
The camera changes exposure wile you are shooting. That my problem is.
When I walk out of my flat with my camera switched on I don't want to see the automatic exposure correction. Dunno how to describe but have you never seen the effect when you pan from a window to your wall? It must be possible to lock these settings to eliminate the automatic correction.
What I like to see as an option is the autofocus, I got lot's of refocussing in low light conditions when focus was actually perfect
Also would be really awesome if you could set the exposure time to image starry nights, I mean, the device is called Galaxy is it not
Unfortuanely I am not a developer so I cannot contribute to these options and can only hope some cool devguy with the knowhow has the same wishes as me
Has anyone noticed that you can set iso in manual mode and then modify shutter speed and boom iso is set to auto again? How can I have need control? Love the size and weight of this phone but camera is kind of weak compared to s7.
Yes, I would like to adjust ISO and shutter speed togheter and separately, but as far as I know this is not possible. I hope they can adjust it in future release.....
Manual Camera lets you adjust both of them independently, but you can only take pictures up to 8 mp. I'm really no too familiar with camera APIs and such (or photography for that matter) so I don't know if this has any implications, but I would say that picture quality is very similar otherwise. If you don't mind the resolution and price ($3) it's not too bad. Here's a comparison: Stock / Manual Camera
I would say the stock camera does a good job of setting the ISO on its own, but I understand the need for manual controls.
No it's not! Even in 3 mp if you set for example 50 iso and than set shutter speed to for example 1/50 and go back to setting...... voilà iso is in auto mode again
cingolat said:
No it's not! Even in 3 mp if you set for example 50 iso and than set shutter speed to for example 1/50 and go back to setting...... voilà iso is in auto mode again
Click to expand...
Click to collapse
Manual Camera the app, not manual mode in the stock camera
Play Store
I also tried Camera FV-5 because I used it on my Nexus 4, and though it does support manual control of ISO and shutter speed (still with the same 8mp cap,) focus breaks completely when the shutter speed is set low which makes in unusable.
Hello, I don't know much about manual set up the Photo Quality (Raw), what settings did the pros of you use to get out max of the camera?
Would be happy about some tutorial Thank you!
There's no such thing as "best" setting when running manual. It all depends on the situation you're in. The flexibility of manual is what makes it so wonderful.
-If you want better low light photos, use as low shutter speed as possible and as low ISO as possible for lowest amount of noise
-When shooting action in bright light crank up the ISO and shutter speed to freeze action
-Changing white balance manually when it's needed
-Manual focus for tricky focus situation, like if you want focus on a very small/thin thing that the autofocus refuses to find
That's like the most common situations for me anyway when I want to run manual settings. But basically, for the best image quality as low ISO as possible but it needs slow shutter speed so if you set shutter too low the image will get blurry. OIS would have helped a lot.
dannejanne said:
There's no such thing as "best" setting when running manual. It all depends on the situation you're in. The flexibility of manual is what makes it so wonderful.
-If you want better low light photos, use as low shutter speed as possible and as low ISO as possible for lowest amount of noise
-When shooting action in bright light crank up the ISO and shutter speed to freeze action
-Changing white balance manually when it's needed
-Manual focus for tricky focus situation, like if you want focus on a very small/thin thing that the autofocus refuses to find
That's like the most common situations for me anyway when I want to run manual settings. But basically, for the best image quality as low ISO as possible but it needs slow shutter speed so if you set shutter too low the image will get blurry. OIS would have helped a lot.
Click to expand...
Click to collapse
Best answer bro
Also,
Picture is based on situation ,optimise the settings according to it .
You would have to mess around with the settings yourself. As each person has a different perception of their own version of a perfect image.
One of thing that can improve photos is shooting to raw and develop them on computer where you have much more control over it and could get better performing algorithms. Anyway everything said above still apply.
dannejanne said:
There's no such thing as "best" setting when running manual. It all depends on the situation you're in. The flexibility of manual is what makes it so wonderful.
-If you want better low light photos, use as low shutter speed as possible and as low ISO as possible for lowest amount of noise
-When shooting action in bright light crank up the ISO and shutter speed to freeze action
-Changing white balance manually when it's needed
-Manual focus for tricky focus situation, like if you want focus on a very small/thin thing that the autofocus refuses to find
That's like the most common situations for me anyway when I want to run manual settings. But basically, for the best image quality as low ISO as possible but it needs slow shutter speed so if you set shutter too low the image will get blurry. OIS would have helped a lot.
Click to expand...
Click to collapse
Best answer so far.
Sent from my Honor 8 using XDA Labs
I think like many, I've disabled all the beautification effects and lightning effects in portrait mode.
Wondering in that case if anyone is aware of a difference between both modes? I've kept using portrait but actually wondering if I should use aperture instead since it allows to change the point of focus and aperture strength effect afterwards which would be beneficial when portrait mode fails to blur some stuff or blurs too much stuff.
Just wondering what others have tried, thoughts, etc.
Aperture is more like a real DSLR. Portrait mode will try and keep faces in focus whilst also having bokeh.
Personally I prefer aperture mode. This allows you to edit after the fact and is better quality.
Maybe you can select different bokeh-types in portrait mode.
I don't get the soft effect.. tried the suggested on other thread.. disable all beauty effects and choose the darkest skin tone finally choose the the shapes (the star icon) of the lights on the background
First, let me say I'm a camera dummy. This is the first phone I have that I try to take pics with. That said, I can't seem to get indoor shots right with this camera. Pics always too bright and too cool.
My room is well lit with florescent warm lights. But pics come out looking like I'm in a hospital room. Bright, cool. I'm in a hotel lounge right now. Plenty of light, not dim, but warm. Pics come out too bright, too cool.
I've tried using all the temp settings in the stock app. I've tried gcam 6, 7, hypercam. HDR off, on, enhanced. AI, no AI. Doesn't matter.
For reference, with a borrowed iPhone 10, default settings, point and shoot, pics come out looking like what my eyes see in same room. Okay, that's a much more expensive phone, obviously, but seeing posted pics I know this phone can take good pictures.
I'd appreciate any pointers. Thanks in advance
Stock camera HDR definitely produces "colder" pics comparing to gcam. Among gcam modes I've tried the most liked was Parrot's Astrophoto V12. Also I don't like elevated ISO of pics produced with stock camera HDR. Can you try Parrot's gcam with AWB mode set to IMX586 in Photo Advanced Settings?
qwertysmerty said:
Stock camera HDR definitely produces "colder" pics comparing to gcam. Among gcam modes I've tried the most liked was Parrot's Astrophoto V12. Also I don't like elevated ISO of pics produced with stock camera HDR. Can you try Parrot's gcam with AWB mode set to IMX586 in Photo Advanced Settings?
Click to expand...
Click to collapse
Thanks. I'll try it when I get home and have decent connectivity.
qwertysmerty said:
. Can you try Parrot's gcam with AWB mode set to IMX586 in Photo Advanced Settings?
Click to expand...
Click to collapse
I downloaded the gcam from the link and made setting change as suggested. Unfortunately it did not make a big difference from the stock camera temp-wise. To make sure it's the camera and not the screen, I looked at the same photos on my OLED TV set to warm 2 (closest to D65), it's still skews blue.
Manually reducing exposure helps with brightness, but not so much the temp. HDR is kind of a mixed bag.
Maybe I just have wrong expectations of what a camera should be able to do lol
From my experience stock camera gets exposure and white balance pretty good (AI turned on), very close to what I see with a naked eye. Pretty much all Gcam apps take very cool and desaturated pictures on default settings. It needs quite a lot of tinkering to get them right, and even then stock camera produces more natural results. Stock HDR is a joke (at least in situations where I tried it). Gcam clearly wins in very low light, otherwise I use stock app exclusively.
I would advise to try manual WB settings in stock camera, but you already did that with no improvement (which sounds a bit strange to be honest), so not sure what else to suggest.
About the exposure - what Auto Exposure settings do you have? Mine is center weighted and works good. If there is a face in the photo, it gets priority and the rest of the photo might be under/overexposed, but that's the point of this feature.
_mysiak_ said:
From my experience stock camera gets exposure and white balance pretty good (AI turned on), very close to what I see with a naked eye. Pretty much all Gcam apps take very cool and desaturated pictures on default settings. It needs quite a lot of tinkering to get them right, and even then stock camera produces more natural results. Stock HDR is a joke (at least in situations where I tried it). Gcam clearly wins in very low light, otherwise I use stock app exclusively.
I would advise to try manual WB settings in stock camera, but you already did that with no improvement (which sounds a bit strange to be honest), so not sure what else to suggest.
About the exposure - what Auto Exposure settings do you have? Mine is center weighted and works good. If there is a face in the photo, it gets priority and the rest of the photo might be under/overexposed, but that's the point of this feature.
Click to expand...
Click to collapse
How do I do manual WB in the stock cam? AE is center weighted (it's the default). Thanks
barth2 said:
How do I do manual WB in the stock cam? AE is center weighted (it's the default). Thanks
Click to expand...
Click to collapse
You need to switch to pro mode.
Btw.manual white balance works only in certain gcam versions, more often than not it doesn't do anything. The most easy way is to try some "crazy" WB and tap to focus. If the screen doesn't change the color tint, you need to use different gcam version (or maybe change some low level gcam settings, but not sure which ones).
Edit: in Hypercam, enabling "focus tracking" breaks manual white balance settings. Without this feature white balance can be changed.