REQUIREMENTS.
MUST BE ROOTED WITH RECOVERY.
HAVE INIT.D SUPPORT for method 1.
HAVE TERMINAL EMULATOR for method 2.
NOTE: This may work for all android devices but is only tested on a LG D851. The mod will install on all devices but may give unwanted results. If it works let us know.
GENERAL DISCLAIMER.
XDA and I are NOT responsible if anything wrong happens to your device by using this mod. Always make sure you have a backup ready if needed.
ABOUT THIS MOD.
Here is a very simple mod that I wanted to share. This is what has been labeled in the past as the build property to remove a FPS cap on all android devices. This doesn't actually do that but you will see an increase in frames per second by adjusting the EGL swap interval. Unfortunately, this property has always had big issues with visual artifacts that made it useless to use.
I found it frustrating that we could obtain such a high FPS but plagued with issues. So I spent some time and found a new value. One that could actually work on all android devices. Instead of 1 for stock or 0 for modified. Here is the new value...
debug.egl.swapinterval=-60
A general description...
https://www.khronos.org/registry/egl/sdk/docs/man/html/eglSwapInterval.xhtml
While other negative values may work, -60 brought the most bang for the buck when it came to benchmarks. I am truly excited about finding a way to make it work and although it's just a new value, I would appreciate if you could give me credit if using this property as it is the first time it will actually work the way we want it. This value didn't just fall from the sky. Certainly no need to ask for any permissions.
WAYS TO USE THIS MOD.
I figured many people would at least like to try this out so I made it as easy as possible for newer and more advanced users. The mod is actually really easy to apply. Simply add it to your build.prop file and reboot or use one of methods below.
METHOD 1.
Use the proper flashable zip to install into init.d so the mod is ready directly after a reboot.
METHOD 2. (recommended)
Use the proper flashable zip to install into /system/xbin and call upon it when needed and disable it when not needed.
INSTALLATION.
Method 1
version 1.1
1. Download https://www.androidfilehost.com/?fid=23991606952603390
2. Flash in recovery.
3. Reboot.
METHOD 2.(recommended)
version 1
1. Downloadhttps://www.androidfilehost.com/?fid=23991606952602432
2. Flash in recovery.
3. After you reboot open Terminal Emulator and type the following without the quotes.
4. Type "su" and press the enter key.
5. Type "unlockfps" and press enter. This will activate the property for higher fps.
To deactivate type "lockfps"
NOTE: You may need to toggle your screen off/on to fully activate the mod using method 2.
You will also need to activate the mod again after a reboot. The setting won't survive a reboot with method 2.
UNINSTALL
METHOD 1.
version 1.1
https://www.androidfilehost.com/?fid=23991606952603391
Version 1 (depreciated)
https://www.androidfilehost.com/?fid=23991606952602181
METHOD 2.
version 1
https://www.androidfilehost.com/?fid=23991606952602429
CHANGELOG
Method 1 version 1.1- Fixed permissions.
I have had people tell me battery life is better and some say it's worse. You be the judge and let us know.
Happy Flashing!
These zips will flash on any device, so If you have something other than an LG G3 you can try it. If you choose to try I definitely suggest using method 2. This way if you run into trouble all you need to do is reboot and the mod is disabled.
PLEASE!
IF YOU TRY THIS MOD ON ANOTHER DEVICE LET US KNOW HOW IT WORKS!!
So far I have positive reports for Samsung and Sony devices.
thanks bro. gonna try it on my vs985
Installed on my D855 and it improves animation speed an in overall system fluidness. I'm using it in combination with LSpeed tweak and working perfect, for battery impact, if there will be one, will see after daily use. Thanks for this my phone is flaying, so to speak.
Sipi1302 said:
Installed on my D855 and it improves animation speed an in overall system fluidness. I'm using it in combination with LSpeed tweak and working perfect, for battery impact, if there will be one, will see after daily use. Thanks for this my phone is flaying, so to speak.
Click to expand...
Click to collapse
Yea. I thought it was only going to work in games and such but it seems to make everything a little quicker and smoother. Scrolling etc... I wasn't expecting that.
after installing unlockfps antutu score not bad, using darkknight rom.
getting around 42+++ on antutu as well. & yes, everything seem much snappier, considering i got shedloads of listview, ime & toast animations (xuimod/xposed, ftw!).
good example is gosms. starting the app uncached is almost instantaneous. then when i go to a long thread (conversations w/ wifey, go figure) i could really say that load time is quicker than before the mod. close to 1 batt cycle & i don't notice any unusual drain.
tried it on my T700 as well. i'm getting the same results, though antutu scores don't agree. didn't explode so far. btw, does enabling hw/gpu acceleration negate this? or is it the other way around?
maxq1 said:
getting around 42+++ on antutu as well. & yes, everything seem much snappier, considering i got shedloads of listview, ime & toast animations (xuimod/xposed, ftw!).
good example is gosms. starting the app uncached is almost instantaneous. then when i go to a long thread (conversations w/ wifey, go figure) i could really say that load time is quicker than before the mod. close to 1 batt cycle & i don't notice any unusual drain.
tried it on my T700 as well. i'm getting the same results, though antutu scores don't agree. didn't explode so far. btw, does enabling hw/gpu acceleration negate this? or is it the other way around?
Click to expand...
Click to collapse
I have "force gpu rendering" enabled. To boost 2d rendering but that's it as far as dev options.
If your talking build properties then I really don't know for sure.
Hey,
I use Methode 1 on newest BlizzPop at D855.
For First Time i can say...... Wow amazing. The Rom is very very fast with this Mod. No lags. Smooth and Fluid.
Now i hope the Battery hold.
Test right Now @ work.
Thx for your great Mod, work on it and your Time.
razz1 said:
Yea. I thought it was only going to work in games and such but it seems to make everything a little quicker and smoother. Scrolling etc... I wasn't expecting that.
Click to expand...
Click to collapse
For me it seems improve phone and graphics in general, for games I don't know because I don't play games on it. So far didn't notice any heating up or any other side affect from this only improvements and also didn't notice any battery drain.
Working so far
Working great so far ! i also combined this with the CTT mod and the combination is killer so smooth the fastest experience ever!
lg G3 D850 AT&T
Rom : Blisspop v3.2 5.1.1 5/12/15
Kernel: 777 Kernel
flashed on vs985
This mod is amazing! the before and after is huge. My phone already felt really fluid but after installing this is flies--apps open instantly and animations are like butter.
Thank you so much for sharing this with the community. Everyone needs to flash this because the difference it makes is amazing.
NVM!
I combined method 1 with Velocity set to 4300 and a few other tweaks to build.prop, and made this phone run like butter. Only place where I see stutter is on Facebook, but is better than before the mod.
Sent from my Ice Cold D850
Thx alot razz
I have d855 and tried it, method 1 didnt give me any change in antutu benchmark so i tried method 2 and benchmark gave 3000 points more
Both tests after reboot
Why was it locked in the first place?
is this different from the one found in hidden menu? the dynamic lcd refresh on/off - enable 60fps
Sorry for the stupid question... but do i need to add (after i flashed and activated (method2) ) "debug.egl.swapinterval -60" to build.prop ?
sabret00the said:
Why was it locked in the first place?
Click to expand...
Click to collapse
It wasn't. This mod is to adjust a swap interval. Not actually unlock anything.
People have just called it that in the past.
radeonxt said:
is this different from the one found in hidden menu? the dynamic lcd refresh on/off - enable 60fps
Click to expand...
Click to collapse
Completely
broyer10 said:
Sorry for the stupid question... but do i need to add (after i flashed and activated (method2) ) "debug.egl.swapinterval -60" to build.prop ?
Click to expand...
Click to collapse
You don't need to add anything permanent to the build.prop file. These methods will do it on the fly for you.
Used method one and no longer have slight stutter in notification panel!! Now to try antutu
Related
http://forum.xda-developers.com/showthread.php?t=1111145&highlight=tablet
did it on my tablet and it "seems" faster someone tell me if its not just my imagination
you just used CMW zip? on what ROM?
worked for me. stock tab with pershoot kernel apps load faster. its like a dream come true
I flashed it via cwm on bonsai Rom. Can't say I really notice a difference. Couldn't have hurt though.
pretty sure that script does nothing more than what autokiller has been doing for years (with more options + gui + market app)... http://andrs.w3pla.net/autokiller
If you read the whole thing,
SellswordShev said:
pretty sure that script does nothing more than what autokiller has been doing for years (with more options + gui + market app)... http://andrs.w3pla.net/autokiller
Click to expand...
Click to collapse
If you read the whole thing, you would know that it also changes the virtual memory for each app. This helps with multitasking, exiting and closing apps, etc.
So, it does more than Autokiller does. For me its faster and it doesn't crash my phone or tablet so, I like it.
Highriser said:
If you read the whole thing, you would know that it also changes the virtual memory for each app.
Click to expand...
Click to collapse
No idea what that means. Apart from the lowmemorykiller tweaks all I see it changing are some swap / cache write parameters (this are properties of the system vm space not each apps'), most of which is handled in the advanced tweaks section in autokiller. Not to mention the autokiller advanced tweaks also deal with polling parameters of services other than just memory management. It's the more complete, tried and tested solution.
did it on bonsai with CWM yea i dont notice it but doesnt hurt...
Just flashed ona stock, and rooted tab. Ui transitions are improved, but have yet to test serious multitasking.
Guys this will probably not offer any performance improvements considering the highest page size limit set is at 72MB. The GT10.1 has 1GB of RAM, I doubt the tiny low memory page limits set by this script will have any effect.
I would suggest more appropriate page numbers, but it would be better if you just used autokiller over modifying a script like this, it does the same thing but with a GUI like I have already mentioned in the thread. The only advantage this script may have is that settings apply on boot so it could potentially improve boot speed (which is insignificant to me atleast)
Hmm, and I immediately noticed a difference with more free ram. Before, and it would tank, and and slow everything up. I but maybe with that app or some tweaks it could be even better for us!
Anyone got it working with TW?
hshah said:
Anyone got it working with TW?
Click to expand...
Click to collapse
Just flashed it on bonsai with touchwiz and using it for past 24 hrs. Runs beautifully whether its a placebo or not i notice it and I love it.
Thought i'd go ahead and post this very much needed script for our mopho! I take no credit for this work of art! Big ups to zepp for his much appreciated work!
http://forum.xda-developers.com/showthread.php?t=991276
Don't forget to read his thread completely before asking derp questions! His thread is beyond detailed and well explained! Don't forget to hit his thanks button!
Sent from my MB855 using XDA App
Well, I tried it. I'll post my findings.
Trust it makes your mopho a crap ton better! I used it when I was on my epic
beyondinferno said:
Well, I tried it. I'll post my findings.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Thanks for the ups
So what issue is there with the photon? 1gb ram I imagine, yes?
zeppelinrox said:
Thanks for the ups
So what issue is there with the photon? 1gb ram I imagine, yes?
Click to expand...
Click to collapse
I would Highly Recommend this to anyone. Just installed it on My friends Photon. in the config we chose 2 for scroll speed, and 4 for Memory settings. The phone overall is much smoother, and webtop runs like PC, and is very smooth, it was a little laggy before the script
Note: We rebooted from the Script and the phone went into a boot loop, we pulled the battery and restarted the phone and it booted up just fine and was noticeably faster.
detcup4evr said:
I would Highly Recommend this to anyone. Just installed it on My friends Photon. in the config we chose 2 for scroll speed, and 4 for Memory settings. The phone overall is much smoother, and webtop runs like PC, and is very smooth, it was a little laggy before the script
Note: We rebooted from the Script and the phone went into a boot loop, we pulled the battery and restarted the phone and it booted up just fine and was noticeably faster.
Click to expand...
Click to collapse
Yes. glad you like it.
Sent from my MB855 using XDA App
Sorry for bumping an old thread but... somebody did ask recently about using it on this device... I recently implented settings for higher ram devices...
Also there is an update...
Changelog:
Updated October 3: - V6 SuperCharger Update 9 Beta 6.2.2
Added - 2 OOM Sticks! zOOM (quick) and vrOOM (verbose) versions. (yeah yeah... I shoulda made Four Sticks! get it?)
Added - PowerShift Scripts! (make quick widgets for different minfrees!)
Added - Bullet_Proof App One-Shots! (you can make it a widgetable script whenever you bulletproof an app!)
Added - (S)97BulletProof_Apps boot script (you can add to it whenever you bulletproof an app!)
Added - Fast Engine Flush - You can make a widget for it or put it on a schedule!
Improved - Re-SuperCharger - When you copy settings from sd card, it will load 99SuperCharger
Added - Support for devices that use S*(not numbered) boot scripts so S99SuperCharger is created instead of 99SuperCharger
Added - Support for com.htc.launcher (knows it's locked status automatically)
Added - Support for devices with /system/etc/hw_config.sh
Remembers - If you're using local.prop or build.prop (you can change setting in Options)
Improved - Test on startup (Test Drive)
Enhanced - The interface all over the place (the menu is a "Driver's Console")
Added - Check to see if you selected an inappropriate setting (256 mb can't choose 8 or 9)
Fixed - A bug where it would mess up a milestone's init.mapphone_umts.rc file if V6 ran twice... /me n00b
Added - Another 1,050 lines of code
The file is V6_SuperCharger_for_Android-update9_beta_6.2.2.un.zip
It has 2 OOM Sticks... so... Come Get Some!
Awesome imma try now. I had the version before this one and couldn't get the launcher to supercharge and become hard to kill.
Sent from my MB855 using xda premium
Ran the script, honestly I didn't notice a change. I will keep my eye on it though.
Same here. Ran the script and didn't really notice a difference so far.
Sent from my MB855 using Tapatalk
Zepp thanks for your continued support for the android community! I have been using v6 for some time now! With each update theres always some very useful goodies! And for those that claim it does nothing for your phone. Thats crazy. With 1gig and v6 I noticed a much more responsive phone! Im a performance freak and I have ran many tests to prove that v6 does make my mopho an even more brighter phone! So I am pretty sure of youre running the latest v6 script with everything corrected. You'll notice a major difference. And also if you're using a custom rom. Check in system/etc/int.d to see if theres pre ram/min scripts there. Delete them before running v6. And always check the.v6 script to see if it ran correctly.
Sent from my MB855 using XDA App
I havent noticed a huge change in the homescreens, but web browsing and the webtop are smoother.
I think for higher ram devices, for the most part, it serves to smooth out everything by getting rid of glitches or stutters.
Also, over the course of time, no matter how many apps you run or load, it will always feel fresh and shouldnt ever lag.
Seems to make an noticeable improvement for me, snappy and smooth. Thanks zepp for taking it to the next level.
My findings on the Supercharger script...
cobrahicks said:
Seems to make an noticeable improvement for me
Click to expand...
Click to collapse
Same here. I was a bit apprehensive to run the script, as I've just started to wade into rooting my phone. (And running scripts, too)
But I'm happy to report that it really sped up my Photon's launcher.
FWIW, I'm running a stock ROM, rooted, with ADW as my launcher.
Smooth as butter, even with fairly intensive LWPs, like Bamboo Forest with all settings maxed out, and plenty of widgets running.
zeppelinrox said:
I think for higher ram devices, for the most part, it serves to smooth out everything by getting rid of glitches or stutters.
Also, over the course of time, no matter how many apps you run or load, it will always feel fresh and shouldnt ever lag.
Click to expand...
Click to collapse
Your last sentence is what brings me grief! I am using the updated script you mentioned in the previous post (1000hp) and my photon, when using WEBTOP, still gets that low memory warning...when I check my memory status, i have like 29mb left...and webtop is laggy...any suggestions?
BTW thanks for your awesome script!
I was gonna try this, but the directions are kinda all over the place and I don't really follow. So is there an actual benefit? If so, perhaps I'll sit down and try to figure out how to do this, thanks guys.
2JZ GZE said:
Your last sentence is what brings me grief! I am using the updated script you mentioned in the previous post (1000hp) and my photon, when using WEBTOP, still gets that low memory warning...when I check my memory status, i have like 29mb left...and webtop is laggy...any suggestions?
BTW thanks for your awesome script!
Click to expand...
Click to collapse
Can anyone help me?
2JZ GZE said:
Can anyone help me?
Click to expand...
Click to collapse
Do all settings stick?
The launcher is supercharged, the OOM groupings are in effect and the minfrees match?
Run the script and check what it says under the menu options.
Is there a zip ffile I missed? All I saw was a txt file.
Sent from my Photon via XDA
I have seen this with other devices and wondering if anyone of the developers that have put it into their ROM can make a flashable zip for us who want to stay on stock deoxed? Thanks in advance.
Been researching all day and FINALLY found this from an outside forum source. Makes a HUGE difference if you are running stock.
"If you download Blade Buddy from the market and go into Advanced Settings, you are given the option to set a value for:
debug.sf.hw
Setting it to "1" should enable GPU Acceleration in the Android UI. (I believe this only works in Gingerbread). Enabling it won't always make a difference, since some UIs like TouchWiz and Sense 3.0 already have a limited form of GPU UI rendering , but I've seen many people say that it makes a hige difference on some devices and things like swiping, scrolling, and zooming become much smoother.
But it's worth a shot due to the potential benefits. The worst it can do is not change anything. (Remember to first click "Apply" in the Menu and then "Save", and then reboot).
Does anyone want to try and post their results?
My Inspire feels smoother now, but I'm on a ported ROM from the Sensation (Sense 3.0), so it's harder to tell.
You can also enable stagefright codecs which should give you GPU decoding of videos and media. I'm trying this right now."
RobbyRob said:
Been researching all day and FINALLY found this from an outside forum source. Makes a HUGE difference if you are running stock.
"If you download Blade Buddy from the market and go into Advanced Settings, you are given the option to set a value for:
debug.sf.hw
Setting it to "1" should enable GPU Acceleration in the Android UI. (I believe this only works in Gingerbread). Enabling it won't always make a difference, since some UIs like TouchWiz and Sense 3.0 already have a limited form of GPU UI rendering , but I've seen many people say that it makes a hige difference on some devices and things like swiping, scrolling, and zooming become much smoother.
But it's worth a shot due to the potential benefits. The worst it can do is not change anything. (Remember to first click "Apply" in the Menu and then "Save", and then reboot).
Does anyone want to try and post their results?
My Inspire feels smoother now, but I'm on a ported ROM from the Sensation (Sense 3.0), so it's harder to tell.
You can also enable stagefright codecs which should give you GPU decoding of videos and media. I'm trying this right now."
Click to expand...
Click to collapse
I'll try it...lets see if I see any difference!! I have not lag or anything at this point, So I doubt i'll get any better.
Let me know how it works for you. On stock my flicking and scrolling improved dramatically. Also check out the market loading that improved also. Hope it helps out in some way for you.
just did it...market is way faster def...and transitions to drawer seems much more smooth...thanks
wow even the map application and gallery seem to load faster...double thanks..
Good find. Energy ROM has this built in, but awesome for stock users.
Sent from my HTC_Amaze_4G using XDA App
seansk said:
just did it...market is way faster def...and transitions to drawer seems much more smooth...thanks
wow even the map application and gallery seem to load faster...double thanks..
Click to expand...
Click to collapse
I'll continue to find ways to improve the force. Who knows I might make my own ROM one day.
Just fyi for anyone interested, I assume x has had this for awhile but I just went to build.prop and checked in BP2.4.0 and it is there. Good find though, some of these little build.prop tweaks can really help.
Sent from my HTC Amaze 4G using XDA App
well I'm rooted stock so this was a great find for those of us who just want one or two things and not an entirely different rom.
how do you know it works? I have another phone that is pure stock. I compare with my phone with the change. I don't notice anything.
From what I understand some phones do not support it. I will try to see if I can find the technical reason.
Sent from my HTC_Amaze_4G using Tapatalk
If your into the Rom scene on the Galaxy Note II you might recognize the rom name. I now bring my battery saving, low DPI, stock look lite Roms to the Droid DNA. If you like my Rom, great. If not, please use your backup made before installing and restore your old rom. Thanks for testing it. And please report all bugs and fc's in the thread not via pms. I'm not claiming this rom will give you a massive battery increase. But it should be higher than your stock rom as I have removed a lot of ram consuming bloat. In theory it will give more battery life. At least it has in my testing Vs my stock rom.
Battery Plus Rom V2.1 features:
Built from DNA Stock ROM v.1.15.605.4 710RD (Thanks MicroMod777)
SD card cache tweak, i/o governer set to deadline
More responsive, lite on resources faster Vs Stock Bloatrom.
Low memory usage, over 1.2 GB free on boot
320 DPI this screen was made for !! (Once rebooted got to display setting and set fonts to large)
Improved battery life via, more free ram, tweaks and bloat removal
Ad blocker via hosts file (Helps battery life)
Stock HTC boot animation
Stock Look without sense launcher
Stock 4.1 lockscreen with camera unlock shortcut. (Now centered)
Lite base rom. Unwanted apks and libs removed. Download the apps you want like maps etc from Google Play
Improved HTC Camera mod v5 with many settings (Thanks lyapota)
Reboot options. Recovery, Bootloader
3 button hack (No more 3 dots) Please set what you want the recent apps button to do in Display, gestures & Buttons under recent apps button
Dexodex
Verzion location services GPS icon removed
Busybox
4.2 Gallery
4.2 Keyboard
4.2 Camera as a backup.
Nova Launcher
Inverted Google Talk
Warning: Before you download, this rom is not for people that need large text and icons or people with bad eyesight. 320 DPI might be too small for some This is not for Verzion or Sense fans either. As its missing all that stuff.
Download:
Download Version 2.1 : http://pspslimhacks.com/htc-droid-dna-320-dpi-battery-plus-rom-download-for-verzion/
Screenshots:
Changelog:
Battery Plus Rom v2 Lite
Designed as a lite base rom for you to install apps you want.
New build from stock Verzion Rom dump
Over 69mb more of junk removed without killing key funtionality.
More unwanted libs and apps gone.
OI File Manager
Google Talk back in as people use this
HTC Music player removed, google music or poweramp are much better anyway.
Battery Plus Rom v2.1
Video fc fix
links in apps fc fix
Wifi tethering fix, it seems the app doesn't like being installed as a system app
New inverted Talk app, easier on the eyes and battery! (Thanks jonah1234)
Lock screen fix, its now centered (thanks tbolt)
Updated Camera fm and hack to version 5.1
Various bug fixes
How to install:
1. Place rom file on phones memory
2. Reboot into CWM or TWRP recovery
3. BACK UP existing rom. Then wipe system, Factory reset
4. Flash rom, wipe dalvik cache and then reboot
5. First reboot can take 2-3 minutes please give it time it not a boot lock.
6. Go to system and set font size to Large in Display, gestures & Buttons
7. RECOMMENDED: Set recent apps button. In settings go to Display, gestures & Buttons. Click under recent apps button and change it to your liking.
8. DOWNLOAD, your favorite music player like PowerAMP (recommended) or Google music, get your favorite video player like MX Player as the included 4.2 video player has no features...
Tip: Want better photo quality?
Set your photos to 4:3 aspect ratio to enjoy full 8MP resolution 3264 x 2448 = 8MP 4:3
Not the default 16:9 which is 3264 x 1840 = 6MP 16:9
Set the compression level to 10 or 100% for max details and file size.
Thanks too: lyapota for the camera mod, nitsuj17 for the recent apps button hack. Stock ROM v.1.15.605.4 710RD Thanks to MicroMod777. GPS icon removal thanks gitku
Plus everyone that worked to get the unlocked bootloader and root access. Without them, none of this would be possible. x3deamon3x Disable Wifi Nag Fix. Thanks tbot for fixing the lockscreen so it is now centered. New inverted Talk app, easier on the eyes and battery! (Thanks jonah1234)
Also thansk to v6ser for his apk decomplier tutorial, which came in handy for the framework edits.
More info and extras:
FAQ:
Q: I want the recent apps button to be the menu button? How can i do this??
A: Set recent apps button. In settings go to Display, gestures & Buttons. Click under recent apps button and change it to your liking.
Q: The font / text size is too small
A: Go to settings/ display, gestures and buttons. Change the font size to Large or Extra Large to suit
Q: Where is xx application? Its missing
A: Much bloat was removed. But use play store to downlaod google maps, voice, search etc
Q: How can I improve the battery life even more?
A: Install Auto Custom Brightness with will auto dim the screen more. Or set your own low brightness setting.
Q: I hate the launcher
A: Install your own launcher.
Q: Will you make a bare bones super lite rom?
A: Maybe if there is demand for it.
Sweet i have been trying to accomplish some of the feats you've compiled together on my own today and keep coming up lame. Flashing as soon as upload completes.
Can I have some screenshots please.
Sent from my Team 420 themed HTC Droid DNA
whatever.
dr_drache said:
well, Some more credits should be in this post. also, calling other users fanboys because we don't hack up stock roms, and like the phone more or less the way it was designed; is not the way to keep people happy. just FYI, before someone with power fixes it for you.
Click to expand...
Click to collapse
Since when is the term fanboy degrading? I dont know about what may be borrowed in here as i haven't looked in the rom yet but the rest of the post seemed fine to me. This is starting off like the cleanrom thread again. :crying: lets all be friends and give credit where its due. :good:
liquidhaste said:
Since when is the term fanboy degrading? I dont know about what may be borrowed in here as i haven't looked in the rom yet but the rest of the post seemed fine to me. This is starting off like the cleanrom thread again. :crying: lets all be friends and give credit where its due. :good:
Click to expand...
Click to collapse
fanboy in technical forums has always had the Demeaning quality. i edited my post because I was told by a few people, credit doesn't matter anymore. I was actually trying to be informative before someone gets pissed, I guess it doesn't matter anymore who does what.
i'm going to run it through it's paces, even though I think desensed roms, using sense as a base, is rather... incorrectly termed.
dr_drache said:
fanboy in technical forums has always had the Demeaning quality. i edited my post because I was told by a few people, credit doesn't matter anymore. I was actually trying to be informative before someone gets pissed, I guess it doesn't matter anymore who does what.
i'm going to run it through it's paces, even though I think desensed roms, using sense as a base, is rather... incorrectly termed.
Click to expand...
Click to collapse
Well thats all we've got to go off of as of right now. Without source or a AOSP kernel were forced to run desensed roms as an AOSP stepchild. All i was trying to say is i think the OP just meant this rom isn't ideal for people who like stock and or sense roms. No malice intended.
waiting for the download link!!!
No malice intended, its just not for sense fans naturally as its not there (sense). I reworked it to say fans now. Not fanboys. Again no harm indended. I'm on slow internet so the upload is taking time. LAst minute bug discovered so had to re-up it. Please save the reviews till its released and you have tried it!
Uploading now and screens coming.
liquidhaste said:
Well thats all we've got to go off of as of right now. Without source or a AOSP kernel were forced to run desensed roms as an AOSP stepchild. All i was trying to say is i think the OP just meant this rom isn't ideal for people who like stock and or sense roms. No malice intended.
Click to expand...
Click to collapse
tbh desense roms work better than aosp would anyway. Battery life on stock is always better on every device i've ever owned and there's less bugs than an aosp rom built from scratch. Also does anybody know where I might be able to find a flashable Verizon droid boot animation , I prefer it over the HTC one.
Can't wait! Thanks, H
Sent from my Galaxy Nexus using Tapatalk 2
Is a Rom from the future! 12.26.12 ...haha
Isn't phone released dpi at 440? Any I'll affects when running it lower?
Xpiatio said:
Isn't phone released dpi at 440? Any I'll affects when running it lower?
Click to expand...
Click to collapse
No, its just not upscaling so much, 320 DPI vs 480 DPI. 320 is a standard DPI used by many, so no market issues either.
damagickid said:
Is a Rom from the future! 12.26.12 ...haha
Click to expand...
Click to collapse
I live in the future, well here in New Zealand its the 26th
Still uploading, 24% done 80-100 kbs upload is not cool. Yet i have 15 mbits download. NZ upload speeds are bad!
went to the download link but it just says uploading...
itzjonjon69 said:
went to the download link but it just says uploading...
Click to expand...
Click to collapse
Same here
Sent from my HTC6435LVW using xda app-developers app
Sorry it seems that mirror service i used is taking its sweet time. Its been saying uploading but i have uploaded the file (twice now). I'm uploading to a friends private server that has 100mbit line for downloading. No file sharing sites used so this will help.
Once I get that download link live I will try and get some mirrors up asap!
Eta is 1 hour still uploading at 90kbs
Looking forward to trying this. Any ETA on a working download link?
3 mirrors are up!
AboutWelcome to Team Kernalizers's SPRINT Thread. This thread will attempt to teach you and show you how to maximize the performance and battery life of your GS3 and GS4 running the KT747 kernel by Ktoonsez.
In this thread, you will learn everything you need to know about Governors, I/O Schedulers, Underclocking (UC), Overclocking (OC), Undervolting (UV) and the KTweaker application. We will also provide you with pre-configured tweaks to use.
This is a friendly support community. You can post your benchmarks, battery stats, feedback and settings. We will also help troubleshoot any problems that you may encounter while using this kernel and our tweak packages.
RulesPlease consider these rules before using this thread:
1. Follow XDA Forum rules (http://forum.xda-developers.com/announcement.php?f=1712)
2. There will be NO FLAMING, NO SPAMMING, NO HARRASMENT of any kind. These will not be tolerated. You have been warned!
3. Search the thread first before asking questions. Most likely, your question may have been answered already.
4. If you are stuck and need help, DO NOT post comments like "this is not working". It will be ignored. You must provide necessary information like ROM Type (AOSP/TW), Kernel Version, OC, UV ...etc. You get the picture. The more you provide the better we can help
5. Please allow time for the team to find an answer if we can’t figure it out we know enough people to help us out finding a answer thank you
6. Be Patient We have our own personal lives outside of here. Allow the team some time to find answers. We will do our best to help.
7. If you post screenshots, you are allowed a maximum of 3 screenshots.
8. Keep posts/threads on-topic
By post in this thread, you are agreeing to the above rules.
Members
Galaxys3Man30
mw86
GTOJIM
Ramondal
clothednblack1
RErick
chinkybean
daniel4653
steelers_exe
crazymook
castle_bravo
luis86dr
MorphiousGX
TexasEpic4G for awesome banners he makes for us!!!!!
Supported DevicesAT&T Samsung Galaxy SIII : http://forum.xda-developers.com/showthread.php?t=2144004
Sprint Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2032956
T-Mobile Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2207286
Verizon Samsung Galaxy SIII: http://forum.xda-developers.com/showthread.php?t=2201555
Thanks
ktoonsez - For giving us this amazing kernel and the plethora of options available with it. His thread his here Make sure to thank him!
AT&T: http://forum.xda-developers.com/showthread.php?t=1756776
Sprint: http://forum.xda-developers.com/showthread.php?t=1800576
T-Mobile: http://forum.xda-developers.com/showthread.php?t=1871946
Verizon: http://forum.xda-developers.com/showthread.php?t=1853816
All of the Team Kernelizers members for their tweaks and dedication and help
All of the testers, and followers
All of the ROM developers out there for making our phones fun to use
And of course our Friendly Forum Moderator:
kennyglass123
DisclaimerTeam Kernalizers members, Ktoonsez, and ROM developers are not responsible for bricked devices or any other device issues you experience as a result of using information in this thread.
Every phone is different, especially since it was found that we have slow, nominal, and fast variations.
Tweaks provided are extremely experimental and should be avoided by beginners and people who have important responsibilities tied to the usage of their phone.
You Have Been Warned: Use of any information, tweaks and applications in this thread at your own risk. You assume full responsibility for your own actions.
Reporting ToolsHuge thanks to MorphiousGX for our live report form. Please report battery usages at these links.
We will use this information to help make better adjustments to our tweaks. It will collect the necessary information to make sure people compare apples to apples*
You can also view results after you submit, and filter on any of the questions asked (i.e. Tweaker's name, governor, release date..etc).
The form can be found here*https://docs.google.com/forms/d/1-uz...3jPpg/viewform
The results can be viewed here*https://docs.google.com/spreadsheet/...Xc&usp=sharing
If you have any feedback (good or bad) please feel free to let MorphiousGX know he maintains it and you all should thank him.
Team Kernelizers Proudly PresentsTK Mod 2.4
Download www.androidfilehost.com/?fid=23060877489998093 [/B][/CENTER]
Features
Bin File Rename
Individual renaming of the following bin Files for battery savings:
gsiff_daemon
mpdecision
qosmgr
smd
smdexe
Renames bin files with .bak
Bin File Restore
Individual restoring of the following bin files:
gsiff_daemon
mpdecision
qosmgr
smd
smdexe
Restores bin files to their original state.
Mods
KT747 Bootanimation Fix:
Use only if bootanimation is broken. Usually occurs on TW Roms.
Team Kernelizers TouchWiz Build Prop Tweaks
Team Kernelizers AOSP Build Prop Tweaks
Restore of Original TouchWiz Build Prop
Restore of Original AOSP Build Prop
ChangelogLocated in TKMod zip
Contest Splash Screens
You now have access to all Team Kernelizers Contest Splash Screens in one zip!
1st Place Splash Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd Place Splash Screen:
3rd Place Splash Screen:
4th Place Splash Screen:
5th Place Splash Screen:
6th Place Splash Screen:
7th Place Splash Screen:
8th Place Splash Screen:
9th Place Splash Screen:
10th Place Splash Screen:
11th Place Splash Screen:
Stock Splash Screen: Reverts to Original Splash Screen.
Thanks from luis86dr
Edgehood for answering all my questions about Aroma! Thanks buddy!
steelers_exe for his awesome splash screen for Aroma Installer.
RErick for his build prop updater script & for providing Splash Screen zips.
mw86 for his build prop tweaks.
GMan for testing and helping me. Also for providing mirrors!
decimalman for making the build prop script work!
Ktoonsez for such a awesome Kernel and inspiring us to do what we do.
Everyone who helped with testing!
Team Kernelizers for being so damn awesome!
Known BugsSplash Screens will only work on TouchWiz
Working on finding out the cause of these issues. Please report bugs in either of the Team Kernelizers threads.
This is still in Beta, more is yet to come!!!!!!
Kernel InformationGeneral Installation Instructions (for both TW and AOSP):1. Download correct version of kernel for your device and rom. This is important as you may brick your phone is you use the wrong version.
2. Flash kernel using your preferred recovery
3. Do the following AFTER installing the kernel and BEFORE you reboot your phone:
a. Clear cache
b. Clear dalvik
c. Fix Permissions
4. Reboot your device.
TW Specific Kernel Instructions:
(can be used with AOSP too)There are some files on your TouchWiz phone that need to be renamed in order to maximize the battery life of your phone. There has been some debate on whether or not this is necessary, but for now we would recommend renaming these files to ensure that there is no chance of excessive battery drain.
Part 1:
These steps are only necessary on TouchWiz ROMs, however you can also do this on AOSP as well:
1. You must have ROOT. You will need to have a root enabled file explorer on your phone (ES File Explorer works very well and you can get it from the play store (https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en). When you get it, open it up and go the the settings and scroll all the way down until you see the Root Settings. Go in there and enable ALL of the root settings.
2. After that is done, navigate to your root folders using the Folder Up icon at the top. Once you are in your root folders, navigate to /system/bin and locate the following files. You will need to rename them with a ".bak" at the end of the filename
gsiff_daemon --> gsiff_daemon.bak
mpdecision --> mpdecison.bak
qosmgr --> qosmgr.bak
smd --> smd.bak
smdexe --> smdexe.bak
Renaming these files will not harm your phone. Many users rename these files every time they flash a rom, and no damge is done.
Also, some ROMs come with these files renamed or deleted entirely, so if you don’t find a file, don’t be alarmed.
You have to do this every time you flash the ROM and/or Kernel.
If you feel uncomfortable doing this yourself, you can use the TK-MOD (see Downloads section) and it will handle this for you.
Part 2:
Stopping mpdecision from being called:
1. Open terminal emulator and type the following code:
su
2. When terminal emulator asks for root permission hit 'Grant' or 'Allow'.
3. At the # prompt type:
stop mpdecision
Using Rom Toolbox (https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox) we will make a script that will stop mpdecision from being called at each boot so you don't need to use terminal emulator each time
1. Open Rom Toolbox and scroll down to the Scripter option
2. In the scripter, click the “+” button in the top right corner, then select 'Create'
3. Type a name for our new script, lets call it “stop mpdecision”
4. In the commands enter the following text:
#!/system/bin/sh
stop mpdecision
5. Hit the disk icon to save it
6. Select the script that you just created and a dialog box should pop up, select set at boot
Were done here
AOSP Specific Kernel Instructions:When coming from a 3.0 Kernel to a 3.4 Kernel there is a new method with kernel updates. Skipping these steps will cause phone instability, due to some bad data left behind. This is a flaw in the Android OS, not the application. You must follow the instructions below (Thanks ktoonzs for the new method of the ktweaker app)
1. Go to Settings on the phone
2. Go to app manager then all apps
3. Scroll down to ktweaker app n open it
4. Once open hit FORCE STOP and then hit CLEAR DATA
5. Reboot and flash your new update of ktoonzs kernel
6. Repeat steps 1-4 in the above “General Installation” section
You should be good to go after that
Resources & Useful Links
[*]Rescan Media Root (click link on phone and be sure to select launch link with play store)
https://play.google.com/store/apps/d...diascannerroot
[*]Kill Media Server (thanks for the link Jcdominguez)
http://www17.zippyshare.com/v/77111471/file.html
[*]Lux Auto Brightness (set brightness lower than stock minimum brightness on any rom)
https://play.google.com/store/apps/d...d=com.vito.lux
[*]Rom Toolbox Lite by Jrummy
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox
[*]Build Prop Editor free by Rom Toolbox maker Jrummy
https://play.google.com/store/apps/d...ld.prop.editor
[*]Swipe Pad (thanks Naddict) make a easy to launch multitask launcher from anywhere a shortcut to Developer Options (great for aosp Hwoverlay)
https://play.google.com/store/apps/d...ipepad.android
[*]Known Wakelocks thread (Thanks T. J. Bender)
http://forum.xda-developers.com/show...php?p=31974989
[*]DS Battery Saver Pro (manage radios like juice defender with less overhead) (thanks for the link AdamDelozier)
http://forum.xda-developers.com/show...php?p=35046431
[*]Battery Review Thread including extended batteries (Thanks Rlatjs17)
http://forum.xda-developers.com/show...php?p=30478980
[*]Fast Reboot (closes/restarts apps and services similar to rebooting without a reboot)
https://play.google.com/store/apps/d...streboot&hl=en
[*]Better Batter Stats (track all forms of wake locks) (Thanks Sven Knispel)
https://play.google.com/store/apps/d...erbatterystats
[*]Carat (track and discover battery drain prone apps)
https://play.google.com/store/apps/d....carat.android
[*]Seeder 2.0.0b1 (Thanks Lambgx02)
http://forum.xda-developers.com/showthread.php?p=592
[*]Cpu Spy (check used mhz and deep sleep usage) (Thanks Brandon Valosek)
https://play.google.com/store/apps/d...valosek.cpuspy
[*]Universal Initd Support APK (Thanks RyuInferno) (enable check for initd support)
http://forum.xda-developers.com/show....php?t=1933849
[*]Lag Fix(fs-trim) (use trim to trim blocks labeled deleted from storage where blocks are still full) (thanks AuxLV)
http://forum.xda-developers.com/show...&postcount=122
[*]CrossBreeder Combo MOD (combines three discussed entropy lag/lockup tweaks)
http://forum.xda-developers.com/show...php?p=37062006
[*]Flashable Recoveries (please thank Naddict for this amazing resource)
http://forum.xda-developers.com/show...php?p=35741601
[*]If you flashed the KT747 kernel separate from your ROMs installer, you can enable the boot animations by following the directions in this thread:
http://forum.xda-developers.com/show...22&postcount=4
[*]This is a link to the Better Battery Stats thread. This app is only free to XDA members, but I strongly encourage you to donate. And please hit the thanks button while you are there.
http://forum.xda-developers.com/show....php?t=1179809
[*]Schedulers and Governors explained:
http://forum.xda-developers.com/show...php?p=19846276
http://forum.xda-developers.com/show...php?p=26884853
Here you will find all of our tweaks to the kernel. We are providing these pre-configured settings as a means to assist S4 users with further improving their overall experiences on this already beast of a phone or to simply use as a baseline to work upon tweaking further. Please Keep in mind that results will always vary per device regardless on the settings being used. Apply what works best for you and your phone. We're here to help eachother out and with more options comes better experiences for everyone running the KT-SGS4 kernel. Big thanks to ALL who have contributed!
Download links will include the specified profile(s) as well as an "Adjustments" file. The "Adjustments" file is just for easy view of all changes made to a profile compared to stock settings.
1. Download the file(s) to your phone. In case of .bin files, optionally rename the file(s) as .txt
2. Copy ONLY the profile(s) (DO NOT copy the "Adjustments" file) to /sdcard/KTweaker folder using a file Manager of your choice.
3. Open Ktweaker app and click on "Restore Prefs from sdcard".
4. The file you just copied should be listed there. Choose the one you want to apply.
5. After applying, make sure the "Set options on boot" setting on the main menu of KTweaker has a little green text bellow confirming that the settings will be applied upon reboot.
6. Profit!
Balanced Bull: Reloaded (updated: 11~15~13)
These settings are very special to me as they were my very first, dating back to the Galaxy S3, and has gained an incredible amount of feedback. It has become notable for it's fairly smooth interface and amazing battery life. If this stacks up to your standards then I encourage you to use it!
https://copy.com/6DYYijYNqifx
Nightmare To Remember
This will likely become your beautiful, never ending nightmare.. It offers a unique balance between battery and performance but unlike Balanced Bull, it is slightly more performance oriented due to the more aggressive scale up to max CPU. However, only 2 cores will be used for the majority of the time so you can still enjoy a nice buttery smooth interface with just enough juice to last you through the day.
https://copy.com/qWU6AIeeAUyd
Bless The Child v3 (updated: 10~25~13)
Based on Ktoonservateq and aimed towards battery. This is specifically for all the battery hungry users out there wanting to conserve as much power as possible. So don't expect the BEST but rather decent performance out of this one.
https://copy.com/CZdfHiaZEOAu
Feed The Machine
The exact opposite of Bless the Child. This is a performance oriented option for all hardcore users. If battery isn't a priority for you then this is a great option.
https://copy.com/xWpFNDtIsQHe
Day Of Reckoning
Very similar to Nightmare To Remember but is aimed slightly more towards battery without deteriorating much of the performance. It is based off the Pegasusq governor.
https://copy.com/vynBURHcsOUl
Dead By April v2.2 (updated: 11~15~13)
This profile attempts to bring some of the best battery life possible to your device. It is similar to Bless The Child but takes things a step further . It now focuses more on snappiness but still maintains it's well known battery conservation. It manages to maintain a smooth ui for your average daily use.
https://copy.com/9k0rfu4iWKiO
Project Icarus by @mamba720027
So some may wonder why the name "Icarus",why not Hyper Performance or Deadly Good Battery.
Well the reason and to begin explination,short history.
Icarus is a greek mythology who is seen today as a mythical pioneer that tried to conquer the skies.
I like that mythology cause it kinda corresponds to my own saying "fly high or fall hard" which means to aim high or fail trying. So their you have it folks and thus the profile name "Icarus".
And onto explination of each profiles.
The first is "Performance" which is catered for straight out performance with also good battery performance.
This one is for when u dont give a rats flying balls about battery really and just want everything super fast and smooth. But you maybe surprise of battery performance. I recommend everyone try this profile first. My current favorite
The second is "Conservative" this is for those seeking performance but also better battery performance than the first.
This one is the middle man or lady as u may want to refer to it. It gives the best of both worlds,performance and battery. So if the first leave you stranded then fear not, this is the one to turn too
The third is "Kamikaze" which means "god wind". It either knocks the daylight out of your Galaxy S4 due to its high undervolteing and mean intent on Battery Performance but still snappy.
This one the undervolting is of my personal voltage table that runs stable for me with other tweaks. If it runs successfully for anyone else then battery performance may be great.
This one is for those that likes the thrill of trying something new and unsure if it will work
Click to expand...
Click to collapse
https://copy.com/dbSIz
Undisputed 3 (updated: 12~11~13)
This is a universal performance setup in which combines the essential elements of other profiles by providing equal battery life, speed, performance, and stability to bring the ultimate experience to your device.
https://copy.com/H0FUiELjgegB
ECLIPSE v2 (updated: 10~25~13)
This is a performance oriented option where great battery life is also expected to intervene. This not only will bring an incredibly stable, smooth, and snappy feel to your device but will also benefit towards longer lasting battery so you can love and enjoy your phone the way you were meant to.
https://copy.com/fgFWgW30IE38
Asking Alexandria
Another battery driven profile in which focuses on saving as much juice as possible while also maintaining stability and providing an extremely snappy feel to your phone. It is quite possibly one of the smoothest and snappiest battery saving profiles available.
Why Asking Alexandria?
It's named after yet another one of my top favorite metalcore bands and I chose this because Alexander The Great basically ruled the world at one point and "Alexandria" is the female equivalent to that name, which has become known to mean the "one who comes to save warriors".
"Asking" was an addition to the title name as an indication in the sense that we are all asking Alexandria what she can really do to our phone.
https://copy.com/71YlyrO7WWqc
Project Daylight v2 by @mamba720027 (updated: 12~23~13)
Day Light is focused mainly on battery conservation. I felt that its useless if its not smooth and lags alot so I add performance into the mix createing a profile that offers both while its first and foremost goal "battery performance" is still preserved and not diminish. This profile is yet unique and on a different level from my early release of "Icarus"
The contents are 3 profiles unique in their own way, "Daylight", "Daybreak" and "Experimental" along with a "Extra" folder containing wallpapers I created on our S4 for fun while testing . Kind of gives me some inspiration and sense of feel of what my objective is.
Daybreak is a crossbread profile of my Icarus Performance profile and Daylight. Its simply utilizing the performance power behind Icarus Performance profile while useing Daylight profile governor settings as its core to boost battery performance
The experimental profile is heavily undervolted/Underclocked with tweaked scheduler and governor. I taught if some of you could run it stable then it may produce great or mix results
Click to expand...
Click to collapse
https://copy.com/QK7LMmtp44sU
What Lies Beneath
This is an extreme battery performance setup in which essentially transforms your quad-core device into a dual core device.
Why "What Lies Beneath"?
You'll find that during light to moderate operations the cpu remains at lower frequencies for an extended period of time and will only jump to max when needed. Although it's clocked at a max of 1.3ghz it maintains a surprisingly smooth and snappy feel to your device at such low frequencies. This is where battery life is also expected to come in to play as well.
https://copy.com/PXAKKLMFdNDU
Ktoonsified v2 (updated: 12~23~13)
This profile was put together by none other than the BOSS himself, @ktoonsez! This is a performance oriented option in which also offers a great deal of battery life. Haven't tried these settings yet? then what are you waiting for!! Load em up and be prepared for one of the smoothest and snappiest experiences ever!
https://copy.com/4l4JOq9iSPQy
Sleeping Dragon by @mamba720027 (updated: 12~23~13)
Sleeping Dragon V2 Single Core
This is a single core profile aimed at consumeing the least battery for a time when you will be away from home or at work and away from the charger. It was a profile i played with at first as i did not expect it to mount as much with apps and system UI needing a right amount of performance from a CPU to meet todays tasks in performance. In the end i was able to tame the dragon and make it work as best as possible to achieve its goal
Sleeping Dragon V1 Quad-Core
This is the counter part of Sleeping Dragon V2 but with many tweaked parameters to make it a fully functional 4 Core base profile in hopes to achieve close or same battery performace as its single core entity. Unfortunately i still am not sure if it measures up but what i know from previous test with settings @Stock it hold its own in battery department. I am pleased with the results although i would wish to see some light usage results from users.I must give credits to Luigi for useing parts from his Balanced Bull Script, and Undisputed 3 Script and part from my Crimson Dragon Script. I am pleased to present users with this 4 Core or Quadcore profile
Click to expand...
Click to collapse
https://copy.com/hr1vhwiX7ux8
Smooth Operator v3 by @mamba720027 (updated: 12~23~13)
This profile utalize all 4 cores on demand and serves as being a balance between battery and performance. Its as smooth as possible and utalize the full cpu power while operateing sensibly in governor scaleing.
Click to expand...
Click to collapse
https://copy.com/R9Ldl
Hydra
Eclipse and Kamikaze clash with one another in this hybrid profile (BIG thanks to @mamba720027 for the amazing work done on Kamikaze!). This is perfect for those who favor one or both of these profiles. With the merging of some of the essential performance and battery elements of each profile as well as a few minor adjustments, this one also stands as it's own profile and it flies!.
https://copy.com/p2BLOBe4bb3X
Ghost Rider by @galaxys3man30
this setup can benchmark on 1890,1944 and 1998 and its been really good on battery even thou its a performance setup think im going to call it ghost rider cuz its a sleeper yea it shows good battery life but behind that is the raw performance that is on demand when needed.
Click to expand...
Click to collapse
https://copy.com/gEFAiosVLBqI
*Stardust v2* by @mamba720027 (updated: 12~7~13)
This Profile I put together is based on the "AbyssplugV2" governor.
Everything is tweaked and the profile can run by itself or either use the "smooth operator V2" Script or Luigi's "Hydra" Script.
Both are found in Post#8 of the OP. The choice is yours.
Click to expand...
Click to collapse
https://copy.com/siLoOsdy3FKp
Crimson Dragon by @mamba720027
This is a profile that i put together from a lost in the thread Dual Core profile "Lazy Dragon". What was suppose to be a V2 Update of it turned into a 4 Core profile and something totally new, Crimson Dragon. This profile is a variable of Performace and keeping things balance. Its very smooth on TW and produce great results on AOSP as well threw testing and feedback. Please enjoy this new addition :good:
Click to expand...
Click to collapse
https://copy.com/1OBdtbnfDE9M
mine 2
one more for the road
So this thread is to help us save battery life with KTs kernel? I will have to try this out when you get the download link up. I been using Faux but I haven't noticed much of a difference on battery life
Sent from my SCH-I545 using Tapatalk 2
xXJay_RXx said:
So this thread is to help us save battery life with KTs kernel? I will have to try this out when you get the download link up. I been using Faux but I haven't noticed much of a difference on battery life
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
I have been having good luck with the 7/7 KT kernel set to his recommendations.....minus the GPU Max Mhz I keep mine at stock (450)
Loved Team Kernelizers work on the S3 cant wait for S4 goodies:victory:
Op udated
Sent from my SPH-L720 using Tapatalk 4
Ooh very nice. I was waiting for this. I also used TKmod on my S3 and got some insane battery life. Thanks for coming over!
Is it still necessary to rename those files in TW for the s4? I was under the impression its no longer needed. Could be wrong. Let me know team KT if it should still be done.
ATT S4 Rooted. Beastin.
4.2.2
stevehkim said:
Is it still necessary to rename those files in TW for the s4? I was under the impression its no longer needed. Could be wrong. Let me know team KT if it should still be done.
ATT S4 Rooted. Beastin.
4.2.2
Click to expand...
Click to collapse
No need to rename any. As far as I know on my S4 there is only smd and it doesn't cause any drain like it did for some on S3 so just skip the rename and restore section of those by selecting none on both.
Hey guys converting over to S4 from my old S3. Do I need to reflash TK mod after I update my Kernel? Anyone have any pimping settings so far? I notice people keep mentioning Ktoonz 7-7 version for TW has anyone tried his new 8/9 Kernel for TW someone said it's fixed?
ahoslc said:
Hey guys converting over to S4 from my old S3. Do I need to reflash TK mod after I update my Kernel? Anyone have any pimping settings so far? I notice people keep mentioning Ktoonz 7-7 version for TW has anyone tried his new 8/9 Kernel for TW someone said it's fixed?
Click to expand...
Click to collapse
No you dont have to flash the tkmod over again after a update only after a rom update yes cuz it will change the build props and change alot of other things as well but as far as settings go there still being worked on atm buddy just trying to get more supporters to help out and 8/9 has been running great so far me but im on sprint thou
http://pbr1202.photobucket.com/albums/bb374/TexasEpic/Requested Banners/SPH-L720v3_zps61b75aad.png
galaxys3man30 said:
No you dont have to flash the tkmod over again after a update only after a rom update yes cuz it will change the build props and change alot of other things as well but as far as settings go there still being worked on atm buddy just trying to get more supporters to help out and 8/9 has been running great so far me but im on sprint thou
http://pbr1202.photobucket.com/albums/bb374/TexasEpic/Requested Banners/SPH-L720v3_zps61b75aad.png
Click to expand...
Click to collapse
Well if you guys need anything I am always around and also messing with phones and my performance/battery life.
ahoslc said:
Well if you guys need anything I am always around and also messing with phones and my performance/battery life.
Click to expand...
Click to collapse
If you have anything to add you think would be beneficial pleaae let us know and we can try to integrate it.
Post #2 of OP updated with our pre-configured Ktweaker settings. Be sure to read the description to each corresponding profile to see which better suits your interests and kindly provide some feedback as there's always room for improvement if need be. Hope this makes a difference for all you guys and enjoy! :good: