Hi guys,
I have a small issue with an android mini pc, a Rikomagic MK05. I try to enter in recovery using a toothpick(pressing the recovery button) but all I can see is the RKM logo and then "Rebooting" message. The issue is repeating no longer how much I keep pressing the recovery button. You have the video attached for more information. Can you give me an advice?
https://drive.google.com/open?id=0B-G-mvK0pSoHMmY2SmZCSDNPWms&authuser=0
Related
So I installed this ROM (http://forum.xda-developers.com/showthread.php?t=1200985) a few days ago w/o much trouble. Today I updated the ROM to version 2.4 (first used wipe.zip and then the rom). When I rebooted my tab I got stuck at a bootloop (the ROM's logo keeps showing up) and it seems I'm unable to get into recovery.
AFAIK, I should get into recovery by pressing the VOLUME UP & and the power button simultaneously, but nothing happens when I do this. Getting into fastboot isn't a problem, but I just can't seem to get into recovery mode.
Can I access my recovery menu through the fastboot via the SDK manager? Did I use the correct buttons to get into recovery?
Thanks in advance
You should push on both Power Button and Volume Down buttons. Right after the Samsung logo shows, you will see two menus, let go of both buttons immediately and choose your recovery boot. i hope this will help your problem
Hi I need help.
After Flashin a new ROM it was not be possible to get in the fastboot mode. Pressing down the Power button and the Vol Down button start first the recovery mode than i see for a sec a CWM Screen an than the screen is black and nothing happend.
And as addon the device not boot. Sometimes i get a reboot
Any ideas how I can fix that? Is there a more low level solution?
Thanks,
alexander555 said:
Hi I need help.
After Flashin a new ROM it was not be possible to get in the fastboot mode. Pressing down the Power button and the Vol Down button start first the recovery mode than i see for a sec a CWM Screen an than the screen is black and nothing happend.
And as addon the device not boot
Any ideas how I can fix that? Is there a more low level solution?
Thanks,
Click to expand...
Click to collapse
OK, with testing I found a solution for the problem
Here the steps what i've done:
1. Load the Flyer with the power supply unit.
2. From PC Commandpromt. Start fastboot flash recovery recovery.img. I've get the message "waiting for devices". I've used a old CWM 4 reciovery Image
3. Now connect the Flyer and Start with "Power + Down". Here was the surprise that now the Bootloop stops and i see now the Boot Menu. So I change here to fastboot and flash the recovery Image new.
4 Rebbot now an voila bo boot more and I can use the normal cwm recovery mechanism to recovery one of my old images... Perfekt
Hello
My Prime is unlocked.
My problem is that when i turn on the device it can't load the operation system and then tries to boot into recovery but it get stuck on the Teamwin photo in some strange loop or something.
Is there a way to fix it?
When i press the Power on button with the volume down i'm getting to the screen when i can choose RCK , Android and Wipe Data.
When i press the RCK i'm getting again into the Teamwin photo and again it stuck there.
Is there a way to fix it?
thanks
My Caterpillar S50c is stuck on the boot screen with the following message.
"Your device didn't start up successfully. Boot failure because of the unsigned OS image. Please contact custom service to recover the device. Press power key to shut down device"
Any help will be greatly appreciated.
I can't find a way to get into recovery but when I press and hold volume down and power button, it says "Booting into recovery" then later takes me to the startup screen with the above message.
I can boot into fastboot. Kindly upload any firmware or recovery that can be flashed through fastboot. Or advice how I can put my device into working order.
I tried to enter download mode through recovery mode since I couldn't find the proper key combination for the M31 online. But now it's stuck in a black screen with nothing but the words 'entering fastboot' on top. I can't restart it.
I've enabled developer options and OEM unlock but that's all I did.
Press the power button for a long time (A minute at most)
Thank you!
zequihumano said:
Press the power button for a long time (A minute at most)
Click to expand...
Click to collapse
yo it isnt working pls help me out
Just documenting my (M315FXXU2ATJ9) solution (found through trial and error) in case this happens to somebody.
This is what worked for me:
1. Connect your phone to your PC via USB
2. Hold down VOL_UP + VOL_DN + POWER for 10 seconds
Your M31 will turn off and the charging logo will appear.
You can now simply disconnect the USB cable and turn it on normally.
Hope this helps.
Hello,
I had updated my M315F to official OneUI4.1, but I am having battery issues and the phone is bit laggy, so I decided to revert to OneUI3.1 using Odin tool, however on entering the recovery mode and getting into "Reboot to bootloader", device stucks at "Entering fastboot....", and its unresponsive as download mode doesn't start. The first time I did without unlocking the OEM, but even after unlocking the OEM and entering the bootloader, it says "Entering fastboot...., so again restarting phone and repeating the same process. Download mode doesn't start.
Is there anyway to reboot to download mode?
Thanks in advance
Help is much appreciated
Regards