Hi. I had recently rooted my dell venue 7 3740. After rooting i deleted some of the system apps which were hogging the battery.
Now, after doing factory reset, the tab boots normally and enters the setup mode. But after accepting dell legal i get this error message telling
"unfortunately, com.dell.devicesetup has stopped."
I guess this has to do something with the system apps which i had deleted.
So, i am looking for stock image for my tab so that i can restore it back to normal.
Thank you
rockz1991 said:
Hi. I had recently rooted my dell venue 7 3740. After rooting i deleted some of the system apps which were hogging the battery.
Now, after doing factory reset, the tab boots normally and enters the setup mode. But after accepting dell legal i get this error message telling
"unfortunately, com.dell.devicesetup has stopped."
I guess this has to do something with the system apps which i had deleted.
So, i am looking for stock image for my tab so that i can restore it back to normal.
Thank you
Click to expand...
Click to collapse
opensource.dell.com
you need to find your device and file unbrick......download file unbrick....about 700mb.....extract this.....and dowload flast tool......paste to there......and put device into flast boot mode and run file P802_flash_device_wifi_only.bat .......
Can you tell me how to root this device?????
Related
hi everyone! i need help... I accidentaly deleted my dell streak system dialer using titanium backup. when i try to restore it, it doesnt work. I cant receive call and sms and my 3g is not working but I can use wifi, when I tried factory resetting it, it only make it worse.. when i reboot my phone it stuck on the "Welcome to Dell Streak. Touch the android to begin." What should i do to fix my streak? really need your help on this.. Thanks!
shei010780 said:
hi everyone! i need help... I accidentaly deleted my dell streak system dialer using titanium backup. when i try to restore it, it doesnt work. I cant receive call and sms and my 3g is not working but I can use wifi, when I tried factory resetting it, it only make it worse.. when i reboot my phone it stuck on the "Welcome to Dell Streak. Touch the android to begin." What should i do to fix my streak? really need your help on this.. Thanks!
Click to expand...
Click to collapse
Touch the android to begin of course . You factory reseted your device, so now you have to set it up again.
A factory reset only wipe out data. You're still missing the dialer app from system.
Find the apk somewhere and push it back to system/app or wherever it reside.
Of course I touch it but noting happens. Just stuck on that.
shei010780 said:
Of course I touch it but noting happens. Just stuck on that.
Click to expand...
Click to collapse
Have you tried reflashing your stock rom?
Hello all,
Since couple of days my phone is acting really weird. Here are the specs:
Brand: Huawei U8800 ideos X5
Rom : Aurora 4.1, update 20
Recovery: cwm
I was installing an app from the market and suddenly the phone restarts and every app starts to crash (Unfortunately...... has stopped) with the downloading app stuck at the notification at 80 % forever without progressing. The weird thing is I can't uninstall any app. I can uninstall, but after booting every app uninstalled appears as if it's not Uninstalled at all.
So I decide to do a factory reset using CWM. Cwm says reset is successful, so I restart the phone and see nothing has changed. It's as if no reset has been done and the crashing continues.
So I decide to go for Stock rom (Gingerbread). After following the official installation steps the phone says the installation is successfull and restarts automatically. When the phone boots up all I see is old Aurora Rom and the same old crash of apps(all apps crashes a_z).
This is so weird. I have never seen this before and have been googling since 2 days without any solution.
I request xda devs to help me on this.
Regards
wizardR said:
Hello all,
Since couple of days my phone is acting really weird. Here are the specs:
Brand: Huawei U8800 ideos X5
Rom : Aurora 4.1, update 20
Recovery: cwm
I was installing an app from the market and suddenly the phone restarts and every app starts to crash (Unfortunately...... has stopped) with the downloading app stuck at the notification at 80 % forever without progressing. The weird thing is I can't uninstall any app. I can uninstall, but after booting every app uninstalled appears as if it's not Uninstalled at all.
So I decide to do a factory reset using CWM. Cwm says reset is successful, so I restart the phone and see nothing has changed. It's as if no reset has been done and the crashing continues.
So I decide to go for Stock rom (Gingerbread). After following the official installation steps the phone says the installation is successfull and restarts automatically. When the phone boots up all I see is old Aurora Rom and the same old crash of apps(all apps crashes a_z).
This is so weird. I have never seen this before and have been googling since 2 days without any solution.
I request xda devs to help me on this.
Regards
Click to expand...
Click to collapse
When you're flashing back to stock have you tried to wipe every partition including your internal SD?
Also how soon does the crashing begin after you flash your ROM?, because if the crashing begins as soon you boot up, you may have a hardware issue and of course the only way to solve that would be to send your phone into warrenty if you can.
Hi tidaboy9
I can't actually flash any roms. If I do, it says the flash is successful, but after the restart nothing will change. Whatever I do in the phone, it will restore everything after reboot, apps, history , etc .
By wiping partition, do u mean flashing stock partition. That I did.
All I want to do is do a hard reset, wipe everything and start new, but I am unable to due to above mentioned reasons. And yes, the crash begins soon after the reboot.
Please tell me this not hardware related as it is not under warranty.
Thanks
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse
Hello, I rooted my Note 4 about 2 years ago and never installed any custom ROM nor have I installed a custom recovery. It had been android 5.0.1. Recently, I decided to unroot and finally update it to 6.0.1. I then used ODIN and flashed the official firmware on sammobile. Everything went well with ODIN and the flash was complete. However, once my device rebooted, there was an error where it says "Device does not have DRK, please install DRK first..." and then there was an "error" in the middle of the screen. After 10 min, I removed the battery and manually reset the phone. Once my Note 4 booted back up, everything seemed fine, but i had this constant "unfortunately cloud agent has stopped" msg. Also, I noticed each time I opened the Gallery app, it would crash and the same "unfortunately cloud agent has stopped" would pop up. I tried to force stop the CloudAgent and gallery in my application manager but the issue continued to persist. When I would go into the settings under application settings, simply by clicking the gallery option will crash the settings app. Even my camera app would crash and have the same msg when I click the gallery preview on the bottom right. I read online that it was an issue with dropbox, but nothing changed. Finally, I decided to factory reset and wipe the cache partition my phone through recovery. I then noticed both DRK and Dm-Verity Verification Failed msg in red on the bottm of the recovery menu. Restarted the phone and everything seemed fine until I noticed the "unfortunately cloud agent has stopped" msg again. Not only that, when I try to turn NFC down in the setting, the setting app itself would crash. Tried factory resetting the phone a couple of time but the issues were still there. I also noticed that each time that I would reset my phone, there was the "Android is starting..." green screen that appears as if I was doing updating my phone. I tried re-installing the firmware with ODIN again, but I still had the same issues. I tried using smart switch to re-install the firmware but once i get my phone in download mode, Smart Swtich cant recognize my phone. Here we are now, I can use my phone, but I cant open the gallery app to see my photos, I cant turn off nfc in the settings, I have both DRK and Dm-Verity Verification Failed msg in recovery and I get the green Android is starting screen every time I restart the phone. Any help would be a miracle xD
I forgot to mention this, but before flashing the firmware, I forgot to reinstall some bloatware/Samsung apps that came with the, it might be related. I did back them up with titanium backup tho.
Some specs:
SM-N910W8 (Bell), I unlocked it and use it with Fido
Android 6.1.1
Hello, I have a friend that have an O+ Grande, the problem is that all of the apps on the phone keeps crashing, even the system apps, and displays a message "Unfortunately, APP NAME has stopped." I already tried to flash a stock rom using SP Flash Tool but even though the flash installs completely, the firmware isn't changed (the wallpaper and installed apps are still there). I also noticed that anything you change in the phone whether you uninstall something or change its settings, it'll revert back if you restart the phone. I also tried going to the recovery but no luck since it also shows me an android logo lying with a warning sign. I ran a memory test and the EMMC test shows this "BROM ERROR : S_DA_MT_DEDICATED_PATTERN_ERROR (3098)". Any help on how to fix this? Thanks!!