Hello,
I know already what you are thinking about, here one more who talks about the same parameter over and over, always the sane issue and same problem, posted 1 billion times. Well:
1. Yes I bought the paid version
2. Yes I have installed xposed module and activated boost mode
3. Yes I granted SuperSU permissions to the app
4. Yes I activated the auto hibernation mode
5. Yes it worked for 2 days, after what it stopped (so it works, the problems is why did it stop? I did nothing)
6. Yes I have a rooted device
7. Yes I restarted the device many times
8. Yes I tried many times to do the same way as the first time worked (I did the same procedure)
9. Yes I read many topics about it, and I read the FAQ before writing here
10 Yes I have the latest build version available in Play Store 2.6.1
11. Samsung Galaxy Note 2 device, dr.Ketan ROM v12, AGNi Kernel 4.3.7, TWRP 2.8.5.0, Android Kitkat 4.4.2
Any other question to ask before give me an answer to explain why does not work any more?
Thanks in advance to those who will help me to solve this mystery
comatrix said:
Hello,
I know already what you are thinking about, here one more who talks about the same parameter over and over, always the sane issue and same problem, posted 1 billion times. Well:
1. Yes I bought the paid version
2. Yes I have installed xposed module and activated boost mode
3. Yes I granted SuperSU permissions to the app
4. Yes I activated the auto hibernation mode
5. Yes it worked for 2 days, after what it stopped (so it works, the problems is why did it stop? I did nothing)
6. Yes I have a rooted device
7. Yes I restarted the device many times
8. Yes I tried many times to do the same way as the first time worked (I did the same procedure)
9. Yes I read many topics about it, and I read the FAQ before writing here
10 Yes I have the latest build version available in Play Store 2.6.1
11. Samsung Galaxy Note 2 device, dr.Ketan ROM v12, AGNi Kernel 4.3.7, TWRP 2.8.5.0, Android Kitkat 4.4.2
Any other question to ask before give me an answer to explain why does not work any more?
Thanks in advance to those who will help me to solve this mystery
Click to expand...
Click to collapse
Enable Greenify in accessibility settings.
Tapped from my furious dogo
Related
Hi, first i appriciate ure help and the work here is amazing. i wanted to put the question directly to the right threat but i couldnt (no 10 messages).
i have rooted my galaxy s4 as explained in http://forum.xda-developers.com/showthread.php?t=2364980.
i did everything exactly as mentioned from step 1 to 9 and it all worked.
When i started my phone, also as mentioned, the knox-file told me that phone has security issues... (i thought "nice, now its definitaly rooted"). SuperSU asked me if it shall block the knox, i said yes and the messages stopped.
To make it sure, i downloaded "root checker", the app asked for permission at superSU, i gave it, then message from phone that permission is given, but then nothing happened. Same for Titanium Backup. When i wanted to set permissions directly at superSU, it said that binary file needs an update. What i did was to update superSU via google play as mentioned in many forums, but still same problem. i also downloaded super user, the app said no root permission.
-> i rooted the phone already 3 times following exactly the instrucions at thread from above, every time the same problem.
I read a lot in forums, my conclusion to the problem is that i still dont have my phone rooted.
- What do you think??
- Has anyone any idea what i can do to get my phone rooted?
- Is there a possibility to unroot the phone? because now i always get questions about permissions, but it makes no difference what i press bec it doesnt work.
penqrockt said:
Hi, first i appriciate ure help and the work here is amazing. i wanted to put the question directly to the right threat but i couldnt (no 10 messages).
i have rooted my galaxy s4 as explained in http://forum.xda-developers.com/showthread.php?t=2364980.
i did everything exactly as mentioned from step 1 to 9 and it all worked.
When i started my phone, also as mentioned, the knox-file told me that phone has security issues... (i thought "nice, now its definitaly rooted"). SuperSU asked me if it shall block the knox, i said yes and the messages stopped.
To make it sure, i downloaded "root checker", the app asked for permission at superSU, i gave it, then message from phone that permission is given, but then nothing happened. Same for Titanium Backup. When i wanted to set permissions directly at superSU, it said that binary file needs an update. What i did was to update superSU via google play as mentioned in many forums, but still same problem. i also downloaded super user, the app said no root permission.
-> i rooted the phone already 3 times following exactly the instrucions at thread from above, every time the same problem.
I read a lot in forums, my conclusion to the problem is that i still dont have my phone rooted.
- What do you think??
- Has anyone any idea what i can do to get my phone rooted?
- Is there a possibility to unroot the phone? because now i always get questions about permissions, but it makes no difference what i press bec it doesnt work.
Click to expand...
Click to collapse
Try flashing this in CWM recovery:
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
Hope this helps!
Try flashing this in CWM recovery
Click to expand...
Click to collapse
It might be kind of a noobie question but i still ask it
I followed the instructions from the thread mentioned earlier, but when i go in recovery mode with the button combo i have the "normal" recovery from android and not the CWM. do i need to flash the CWM to my phone like mentioned for example here at method A?
Another thing: Do you think that my phone is rooted and i just got problems because of the SuperSU binary file?
penqrockt said:
It might be kind of a noobie question but i still ask it
I followed the instructions from the thread mentioned earlier, but when i go in recovery mode with the button combo i have the "normal" recovery from android and not the CWM. do i need to flash the CWM to my phone like mentioned for example here at method A?
Another thing: Do you think that my phone is rooted and i just got problems because of the SuperSU binary file?
Click to expand...
Click to collapse
Place the Update-SuperSUv1.86.zip (I gave you a link for it in previous post) on your sd card then repeat steps 2-7 from this thread:
http://forum.xda-developers.com/showthread.php?t=2364980
Once you are booted into CWM recovery flash the Update-SuperSUv1.86.zip file and reboot. Now go open SuperSU it should ask if you want to disable knox. Say yes and then try root checker.
If you do not have Su binary on the phone then you are not rooted.
There is a file in the phone that reflashes the stock recovery on every boot, you would need to remove it to keep CWM.
Please let me know if this works for you, good luck!
while surfing huawei china forums I found this custom Rom (http://cn.club.vmall.com/thread-2182114-1-1.html)
Did any one tried it .. and if yes what is your feedback about it ?
I haven't tried his newest ROM B008, but I have tried several of his older modded ROM for the X1. Issue I have is that I can't get google play store or google services to work. I've tried varies version of goole play store and google service framework, but never could get it to work. Split view is nice...but it isn't automatic, you have to manually select the windows; not as good as Samsung implementation, but better than nothing.
Ahmed.ragab said:
while surfing huawei china forums I found this custom Rom (http://cn.club.vmall.com/thread-2182114-1-1.html)
Did any one tried it .. and if yes what is your feedback about it ?
Click to expand...
Click to collapse
it is sweet, i m using it, only 2 points to note before flashing it:
1) u need to be already on the official B008 rom (otherwise u will get the write to cust error)
2) the bootloader of your X1 must be already unlocked (if not u cannot flash via ADB)
for those using non china 4G sim, u may also get android.phone.com FC-ing during initial boot, no amt of wiping DATA or Cache (of phone itself or apps e.g. contacts, phone etc the usual sugg when u google the problem) will work, in this instance, simply switch to airplane mode, proceed to connect the X1 to your wifi and go abt dong all the updates via Huawei app store, i m not sure which update cured the problem, but when I switch off airplane mode after that, the FC disappears .. YMMV
---------- Post added at 05:17 AM ---------- Previous post was at 05:07 AM ----------
acuratlsfan said:
I haven't tried his newest ROM B008, but I have tried several of his older modded ROM for the X1. Issue I have is that I can't get google play store or google services to work. I've tried varies version of goole play store and google service framework, but never could get it to work. Split view is nice...but it isn't automatic, you have to manually select the windows; not as good as Samsung implementation, but better than nothing.
Click to expand...
Click to collapse
there is actually a very simple workaround for google services (other than google+, which there is another solution), and it doesnt involve 'hacking' or meddling with system files, rooting is not even needed (although KangVIP rom comes pre-rooted)
because even on china roms, Huawei has actually implemented the google framework within, all we need are the correct apps, simply launch the default Huawei Store (App Centre) and search for Google Play, GoogleCalendarSyncAdapter and GoogleContactsSynAdapter. After installation of Play, just launch it and install other Gapps u need from there.
Hi all,
Small point to note, somehow Google always translates the Chinese word "shua" literally as the verb "brush" but it actually means the verb "flash" in this context.
Note that translations of "shua ROM" will end up being "brush ROM" instead of "flash ROM".
FC ing with non china sim card
potatohead said:
it is sweet, i m using it, only 2 points to note before flashing it:
1) u need to be already on the official B008 rom (otherwise u will get the write to cust error)
2) the bootloader of your X1 must be already unlocked (if not u cannot flash via ADB)
for those using non china 4G sim, u may also get android.phone.com FC-ing during initial boot, no amt of wiping DATA or Cache (of phone itself or apps e.g. contacts, phone etc the usual sugg when u google the problem) will work, in this instance, simply switch to airplane mode, proceed to connect the X1 to your wifi and go abt dong all the updates via Huawei app store, i m not sure which update cured the problem, but when I switch off airplane mode after that, the FC disappears .. YMMV
Click to expand...
Click to collapse
this method is won't work for me.
even updated everything but my phone still get com.android.phone FC.
what can I do??
sampei said:
this method is won't work for me.
even updated everything but my phone still get com.android.phone FC.
what can I do??
Click to expand...
Click to collapse
Sorry, I really have no idea what I had done to result in the FCs disappearing. In fact, I wasnt expecting it to be.
My original intention was to play around with it and conduct some experimental tweaks since I was already on it before reflashing to get rid of the FCs.
One other thing that may have caused the FCs to go away is Xposed framework, you can try installing it.
The attached file below is an old version, install it then update to version 2.5.1 via the Xposed app; I also installed the App Settings module (version 1.8) for per app DPI setting. In fact, this is the tweak I wanted to try on EMUI 3.0 B008, it worked on EMUI 2.3 B010 and I was hoping for the same favorable result on EMUI 3.0. It did.
It was after the above that I re-enabled mobile/data and discovered to my surprise the FCs were gone.
YMMV.
Unfortunately I couldn't make it so I'm back to use EMUI 2.3 B010.
Thank you for suggest me some methods.
ps / I got sme results. with Australian Boost sim is worked but Japan Softbank and Singapore StarHub SIM is won't work.
@potatohead
Today I try fix again then suddenly your method is work for my phone. I carefully follow methods then work.
Thanks.
sampei said:
@potatohead
Today I try fix again then suddenly your method is work for my phone. I carefully follow methods then work.
Thanks.
Click to expand...
Click to collapse
can you tell me to do this step by step?
i don't understand chinese
thank u
Well anyone please upload that file on any other websites, I i have tried to download it with many ways but no way succeed
Edit : thank you all, I downloaded it by changing my IP with Psiphon app
1. Install KangVip rom.
2. then switch on airplane mode. (For stop to show phone FC )
3. Install above xposed for Huawei apk.
4. Update xposed to 2.5.1 ( version is very important any other versions are won't work )
5. Install xposed framework then reboot.
6. After rebooted, turn off airplane mode. FC IS GONE ALREADY.
Sent from my X1 7.0 using XDA Free mobile app
hopeless with this, always stop in the middle of download
anyone have another link?
Try it ! hopefully you can install.
http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v29_665be7.apk
alexkarimovic21 said:
hopeless with this, always stop in the middle of download
anyone have another link?
Click to expand...
Click to collapse
if you are referring to problematic download of kangvip's mod, try this
http://www.mediafire.com/download/04izc31qkkl4d2q/X1-EMUI3.0-B008_img.rar
potatohead said:
if you are referring to problematic download of kangvip's mod, try this
thanks for the link, and done flashing but for me its feel laggy and the phone become so hot
i try to back to official B008 with flash update.app via sd card but not success, anyone have solution?
Click to expand...
Click to collapse
alexkarimovic21 said:
potatohead said:
if you are referring to problematic download of kangvip's mod, try this
thanks for the link, and done flashing but for me its feel laggy and the phone become so hot
i try to back to official B008 with flash update.app via sd card but not success, anyone have solution?
Click to expand...
Click to collapse
have u tried the 3-buttons method of flashing?
this method shd work for flashing of any full ROM
http://forum.xda-developers.com/showpost.php?p=58123000&postcount=25
Click to expand...
Click to collapse
potatohead said:
alexkarimovic21 said:
have u tried the 3-buttons method of flashing?
this method shd work for flashing of any full ROM
I did that method too but unsusccesfull, but after many reboot my phone start running well, now i use this ROM as a daily (without lockscreen)
thank you very much
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi Potoatohead, after I installed the Xposed apk, I couldn't install the framework. I just got a hang (4.4.2 Emui 3.0). Downloading the 2.5.1 update and trying to install that result in install failed. Any clues?
(All credit goes to wanam for providing Xposed for TouchWiz roms)
I am not sure if this needs a thread but since i was searching for this information i'm making one for the Xposed fans with an A3 2017.
Because i don't have enough time to test more configurations i can't say if this will or will not work on any other configuration besides the one i have. Feel free to backup everything (using a recovery like TWRP or CWM) and try flashing Xposed yourself. Read the bottom of the post on how to get into your recovery when having a bootloop. I do not take any responsibility for bricked devices and any other damages.
I mostly followed the steps in this thread but i'll write the steps here as well.
This will only work with stock or stock-based roms, for AOSP based roms, use normal Xposed flashables
A recovery like CWM or TWRP (guide) is required.
Backup your /system partition or reckon that you might lose data. Flashing Xposed only affects /system
Install the Xposed 3.1 apk (requires "Unknown sources" to be allowed in system settings)
Go to your recovery by shutting down your phone and holding Volume Up + Home while powering it on
Flash this zip file for Xposed on Samsung devices (ARM). You might find newer versions here (choose ARM for this phone, not ARM64).
Reboot and wait for up to 15 minutes. It might bootloop a couple times and you might have to wait for app optimization for some more minutes
Enjoy the flexibility of Xposed
If your device is bootlooping for more than 10 minutes it's highly likely that Xposed is not working for you.
Note that using Volume Down + Power will restart your device but will always attempt to restart Android. In order to get to your recovery charge your device which will make VolDown + Power shut down the phone instead of restarting it. From there you can VolUp + Home and power it on to boot into recovery.
You can attempt to flash the uninstaller in order to fix the bootloop or if Xposed is just not working and you wanna get rid of it. If that doesn't help, restore your backup (will always work, flashing the uninstaller is just quicker).
Known bugs on the A3 2017:
- none (will add from comments or if i find any)
Sources:
https://github.com/wanam/Xposed
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
https://forum.xda-developers.com/sa.../samsung-sm-a520f-2017-kernel-source-t3557622
Hello,
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
SinusStudios said:
(All credit goes to wanam for providing Xposed for TouchWiz roms)
I am not sure if this needs a thread but since i was searching for this information i'm making one for the Xposed fans with an A3 2017.
Because i don't have enough time to test more configurations i can't say if this will or will not work on any other configuration besides the one i have. Feel free to backup everything (using a recovery like TWRP or CWM) and try flashing Xposed yourself. Read the bottom of the post on how to get into your recovery when having a bootloop. I do not take any responsibility for bricked devices and any other damages.
I mostly followed the steps in this thread but i'll write the steps here as well.
This will only work with stock or stock-based roms, for AOSP based roms, use normal Xposed flashables
A recovery like CWM or TWRP (guide) is required.
Backup your /system partition or reckon that you might lose data. Flashing Xposed only affects /system
Install the Xposed 3.1 apk (requires "Unknown sources" to be allowed in system settings)
Go to your recovery by shutting down your phone and holding Volume Up + Home while powering it on
Flash this zip file for Xposed on Samsung devices (ARM). You might find newer versions here (choose ARM for this phone, not ARM64).
Reboot and wait for up to 15 minutes. It might bootloop a couple times and you might have to wait for app optimization for some more minutes
Enjoy the flexibility of Xposed
If your device is bootlooping for more than 10 minutes it's highly likely that Xposed is not working for you.
Note that using Volume Down + Power will restart your device but will always attempt to restart Android. In order to get to your recovery charge your device which will make VolDown + Power shut down the phone instead of restarting it. From there you can VolUp + Home and power it on to boot into recovery.
You can attempt to flash the uninstaller in order to fix the bootloop or if Xposed is just not working and you wanna get rid of it. If that doesn't help, restore your backup (will always work, flashing the uninstaller is just quicker).
Known bugs on the A3 2017:
- none (will add from comments or if i find any)
Sources:
https://github.com/wanam/Xposed
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
https://forum.xda-developers.com/sa.../samsung-sm-a520f-2017-kernel-source-t3557622
Click to expand...
Click to collapse
knzsys said:
Hello,
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
Click to expand...
Click to collapse
To be honest i flashed 32 bit xposed because i searched for the phones architecture and found 32 bit but that must be a misinformation.
I'm surprised now that it's working on my phone!
Thanks for mentioning this, if you have time feel free to safely try out both versions and report back what's working and what's not.
knzsys said:
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
Click to expand...
Click to collapse
Can't find a reason why our 64-bit phone is not recognized bit the 64-bit Xposed
I you want to install the 64-bit Xposed: got through Magisk
Don't know if it has a direct link: had lotz of reboot with 32-bit Xposed; nearly no reboot with 64-bit Xposed.
PS: Don't get too addict to Xposed has it will stop running when we'll get Nougat
The 64bit version will not work because Samsung shipped the SM-A320F with 32bit Android, even though it has a 64bit-capable SoC.
Im Wondering something here ... 32 bit os on our phone, no custom roms .. etc ... but the J7 2016 has the same CPU, same ram, storage, screen res ... you get the point .. i just wonder if a rom from that would ... and its 64 bit ... i mean, its the same damm SoC
are there any news for android 7 to get xposed without magisk. I have supersu root
y2kadir said:
are there any news for android 7 to get xposed without magisk. I have supersu root
Click to expand...
Click to collapse
Yes, you just have to search the Xposed thread and read.
Pat750 said:
Yes, you just have to search the Xposed thread and read.
Click to expand...
Click to collapse
ok but I just did it and coulnd`t find anything. can you tell me where to find?
y2kadir said:
ok but I just did it and coulnd`t find anything. can you tell me where to find?
Click to expand...
Click to collapse
Well I did, but if you can't even find it, I think it's better for you not to use it. Sorry.
Pat750 said:
Well I did, but if you can't even find it, I think it's better for you not to use it. Sorry.
Click to expand...
Click to collapse
why are you talking foolish ****. if you don't wanna help other people go home.
y2kadir said:
why are you talking foolish ****. if you don't wanna help other people go home.
Click to expand...
Click to collapse
OK here's something to start with.
https://forum.xda-developers.com/showthread.php?t=3034811
but please read the threads there are some good advice's.
Pat750 said:
OK here's something to start with.
https://forum.xda-developers.com/showthread.php?t=3034811
but please read the threads there are some good advice's.
Click to expand...
Click to collapse
I only found this in the thread "The first fixes have found their way into version 88.1, only available for Nougat. That includes especially some fixes for Samsung ROMs, but might also fix bootloops and slowdowns on other devices. Besides that, I think I fixed a MIUI incompatibility, not sure if it works now (and to be honest, I don't give much priority to MIUI). There are still unfixed issues on the queue, and again, please keep reporting whatever you find." but this information is not confirming me that its working.
Hi !
I need help with Naptime (Francisco Franco).
The setting i've made under section "advanced->apps" resets every reboot to default values.
Unfortunatly It also resets by time whyle the phone ist running a bit (2-3h)
Phone is galaxy s4 9505 i've testet with lineage 15.1 and optimized lineage 16, rooted with magisk.
---please please please help---
can you send a screenshoots with this settings section?also have you installed magisk modules or xposed?
paranoic(d) said:
can you send a screenshoots with this settings section?also have you installed magisk modules or xposed?
Click to expand...
Click to collapse
Hmm,
I dont know how to insert a image in my Post... It's the last section of the advanced settings, that only appears if you got root. Called "Apps".
There are no xposed or magisk modules installed.
Best regards
hmm sorry i have never heard of it again.its the first time i have seen something like this.maybe trying to go back to stock and then root again?
Dear All , this method maybe already here somewhere ,
i have tried to root this specific device and i ran into many issues !
but successfully i have done it .
i'll upload the patched file here and i'll mention what method i have done ! ..
unlock boot loader is a must . ( Please read about it in google , All Samsung devices is the same method )
u might repeat the process to times until it successfully unlocked and greyed-out !
Next download this firmware only to be able to run the patched AP .
un-tick Auto-reboot before flashing .
once flash done , power + Volume down to restart , then volume up with power until u boot into the recovery
wipe data . restart . done
to make sure u have done every thing correctly u'll see RED massage once u boot you're device
Firmware ( This is UAE Firmware " T725XXS1ATC5_T725OJM1ASJ3_XSG " ) All Languages included . Link
Patched AP File Link
Please Note that i'm not responsible if u break your Tablet ! .
Proof ( IMG )
GD day :angel:
after rooting is it possible to update firmware to a new one?
moresat said:
after rooting is it possible to update firmware to a new one?
Click to expand...
Click to collapse
No ! ..
Hi
Do I just need to use odin to flash the Firmware you mentioned then use ODIN again to flash the patched ap
I can just add that with this specific fw version and patched ap everything worked on LTE version but I might add my little deviations ...
1st original firmware flash (BL,AP,CP,CSC-non-home one) instantly followed by wipe data in recovery mode.
2nd After the initial setup + wifi connection I installed and updated magisk.
3rd "adb restart bootloader" (here i am not sure if it mattered but anyway) and flush again with the provided Patched AP File (BL,the_patched_AP,CSC - the home one this time ... using CP failed with modem err with me so I just skipped it here)
4th get trough the init setup again with wifi on and open magisk which will install more stuff.
The prerequisites still apply oem unlocked bootloader before you start and keep your battery at least 60-70% since the process drained mine a lot.
You know you are on the right track when you have warning with tablet bootloader is unlocked (at startup yellow) and tablet not running Samsung's official software (red after the first one)
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
chadandchew said:
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
Click to expand...
Click to collapse
The option only shows up when you are connected to the internet.
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
chadandchew said:
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
Click to expand...
Click to collapse
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Thanks for reply. Will try the LOS ROM later. Wish Google crap would disappear totally. I hate it enormously.
By the way which folder am I looking for on that LOS ROM download page
Ah gts4lv I presume
chadandchew said:
Wish Google crap would disappear totally. I hate it enormously.
Click to expand...
Click to collapse
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
topaza said:
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
Click to expand...
Click to collapse
Recently switched to using MicroG Lineage. Timely enough, MicroG passes the SafetyNet now as per the instructions mentioned below and indicated in the attached screenshot. For the fingerprint, I had selected the T720 from the list.
https://www.reddit.com/r/MicroG/comments/shmpng
Along with Aurora store installed as a service, I think you don't need Google anymore.
topaza said:
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Click to expand...
Click to collapse
I'm having some problem here:
I can install LineageOS, I can root/Magisk, I can have TWRP, but not all together at once.
Can you help me on how to do this?
Working on a SM-T725 of course, actually rooted, lineage and TWRP installed, but my Magisk can't install modules, it seems it doens't have root privileges.
Thanks in advance for your answer
anybody have an updated one, the file has been archived on the said link... thanks in advance