Hello guys !
Does the Spigen Ultra Hybrid Case also protect the camera ? I went to Spigen homepage but there is no info about the camera protection and its difficult to see it in the pictures
Thankful for the help
NangaParbat75 said:
Hello guys !
Does the Spigen Ultra Hybrid Case also protect the camera ? I went to Spigen homepage but there is no info about the camera protection and its difficult to see it in the pictures
Thankful for the help
Click to expand...
Click to collapse
It's thin case, and it protects camera when laying the phone on flat surface. If you put your phone on rocks or poke camera lens with knife, it wont help.
Thanks for your reply
I like the Spigen cases , do you know if the Spigen Slim Armor protects the camera better or should i buy the tough armor ?
Just ordered the slim armor !
i use the spigen slim armor and it is very good. phone is a bit heavier but I think it isn't a big disadvantage. my g3 fell down from 2 meters and it didn't crack. I also recommend buying an additional glass protection and the phone will be fully armored
Thanks for the tip, now to the store to buy also a screen protector to protect the amazing screen :good:
I had the spigen slim armor case on, dropped my phone and something shattered the top glass on the camera lens. Cost me $160 AUD to get repaired. so i don't think it provides great camera protection but it's not bad
Related
I recently got my note 3 and need to protect it properly. I got the iloom flexible glass screen protector and have been looking at a few options for a case:
- samsung original flip wallet (expensive!)
- spinge neo hybrid case - which i think i prefer for being sober, slim and seems sturdy
- Feel free to suggest a nice quality case - slim, non obtrusive.
But i have a doubt if the spinge case wont damage the screen protector on the edges. Saw a review of the neo hybrid (i think its the one on the spinge website) and the reviewer's note3 had that screen protector problem, a little damage on the edges because of the case - it lifts the screen protector a bit.
Do any of you have any problems like these with the neo hybrid? I assume it all depends on the screen cover, on how much surface it covers and if it gets tucked below the cover.
Anyway, please feel free to give me your feedback and opinions. They are very welcome.
Thanks
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
mikemq2003 said:
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
Click to expand...
Click to collapse
Seems very nice also. I somehow missed it when i was browsing the cases. And do you have a screen protector? Does the case mess with the screen protector?
I do. I have a tempered glass protector with the spigen bounce. No problems with it. It won't mess with film protectors either. This is the case with my protector. Page 64 closer towards the bottom of page.
http://forum.xda-developers.com/showthread.php?t=2441894
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
manifesto42 said:
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
Click to expand...
Click to collapse
Awesome! Enjoy your case. You will love it.
Otterbox defender, punched out the plastic screen protector and installed a mime feather tempered glass screen protector. Doesn't get any better... In my opinion.
Sent from my NOT3
http://www.amazon.com/Caseology-Sam...d=1386577863&sr=8-1&keywords=caseology+note+3
i have the iloome flex screen protector as well with the case above. Fits PERFECTLY! looks good too.
I got this case to go with my brand new Z3 and I absolutely love it. The only problem is, it fits so tightly my screen protector gets lifted up on the edges and won't stay on.
Can anyone recommend a screen protector that works with this amazing case?
Sorry, no suggestion but a question ? are you using a tempered glass sp or a regular one? I'm using tempered sp and really like the look of the case but I'm afraid it will lift up the protector.
schetz said:
Sorry, no suggestion but a question ? are you using a tempered glass sp or a regular one? I'm using tempered sp and really like the look of the case but I'm afraid it will lift up the protector.
Click to expand...
Click to collapse
I have a Pthink ultra slim tempered glass protector and no, it would not fit with the case. If I would've checked the reviews on Amazon a little better before buying the case it would've saved some time and headache.
After going through getting the Sony Scr24 Style Cover case and this one, I finally found the best case for this phone (imo).
Ringke FUSION case (I got the smoke black one which shows less fingerprints) - it looks a thousand times better than the Tudia, offers decent protection for the phone, and best of all is designed to work with a tempered glass screen protector.
NoXion1 said:
I have a Pthink ultra slim tempered glass protector and no, it would not fit with the case. If I would've checked the reviews on Amazon a little better before buying the case it would've saved some time and headache.
After going through getting the Sony Scr24 Style Cover case and this one, I finally found the best case for this phone (imo).
Ringke FUSION case (I got the smoke black one which shows less fingerprints) - it looks a thousand times better than the Tudia, offers decent protection for the phone, and best of all is designed to work with a tempered glass screen protector.
Click to expand...
Click to collapse
Great news actually as the first case I ordered and waiting for it to arrive is Ringke Fusion [emoji1] thx..
schetz said:
Great news actually as the first case I ordered and waiting for it to arrive is Ringke Fusion [emoji1] thx..
Click to expand...
Click to collapse
Awesome. You'll love it. There's a sticker on the case that tells u to remove the protective film from front and back (start at the camera hole). Just make sure u don't use anything that will scratch the case when u try to get that protective film off - it's really on there. A little patience with it and I got both films off without much trouble.
NoXion1 said:
Awesome. You'll love it. There's a sticker on the case that tells u to remove the protective film from front and back (start at the camera hole). Just make sure u don't use anything that will scratch the case when u try to get that protective film off - it's really on there. A little patience with it and I got both films off without much trouble.
Click to expand...
Click to collapse
Just received. I like it. Better quality then Ringke for nexus 4. I'll stick to it as I don't plan to waste money on dubious cases. If zoogue had case for Z3 that would be clear choice, but this one is more than good. In the future I'll just buy a dbrand skin and slap it on the back with tempered glass so I can remove the case if I feel like it. Also, on nexus 4 ,combination of dbrand skin and clear Ringke back looked awesome.
Edit: one thing I would like though, is bigger lip around the screen. Like on zoogue or diztronic.
Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
I've decided to live dangerously with this phone, I've ordered a KitBag from Amazon and will have no case or screen protector on it, unless a DECENT full coverage one comes along
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
jaju123 said:
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
Click to expand...
Click to collapse
Would you happen to have a link and some photos of the one you found?
shem2409 said:
Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
Click to expand...
Click to collapse
Thank you for posting this review. I was about to buy one too but was concerned If any of the camera bump stuck out or was nicely tucked in. Spigen rugged armour is the best phone case I've ever had. incredible shock protection yet doesn't scratch funny enough. They clean up great and look new throughout (or at least mine does).
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Gravol said:
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Click to expand...
Click to collapse
Try the Slim Armor, gives a good 2mm or so protection to the camera
nibs777 said:
Try the Slim Armor, gives a good 2mm or so protection to the camera
Click to expand...
Click to collapse
I can vouch for the Slim Armor case. Just picked up a P20 Pro yesterday and Spigen was my go-to brand and it's really nice and not super bulky.
The rugged armor is good but the glass screen cover that Spiegen offers is crap! I've had it on the phone for 2 days, just took it out of my pocket and theres a crack right across the screen cover! This is with the Rugged Armor on the phone too, so theres a nice big lip above the screen cover to protect the edges. Nothing else in my pockets either, I'm very careful with my phones.
I have to disagree with the above ref the Spigen screen protector, I have had one on for 3 weeks and am really impressed with it. My phone has been with me everywhere in that time and has taken a couple of drops and knocks and the cover is holding up really well, also it looks and feels far better than the others I have tried. I'm using with the Slim Armor and together it's very well protected
I'd be surprised if the screen protector just magically broke on it's own. Probably just took some minor impact at a fateful angle. Maybe ask Spigen for a warranty and see what happens.
I returned my spiegen tough armour because of the lack of camera protection.
went with this instead... purchased 3 of them(different colors)
great case with camera protection
Dooqi Huawei P20/P20 Pro/P20 Lite Ring Stand Holder Shockproof Rugged Case Cover
I got the Spigen case before I picked up the P20 Pro. Never had an issue with it; I even stuck an iRing to the back of the case so that it gives me some added security if I somehow lose grip of the case.
It's true that the camera hump is close to the plastic spigen back. But it is enough to protect the camera. There is no doubt that it could be better. Spigen have recognised this and brought out a new case. See the spigen website
Anime had experience with Mark Armor Case from Spigen?
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs
Anyone know of a armor case that protects the front and the back? all i can find now is a back case.
spigen rugged armour is the best case
am making an iPhone 8 plus supcase beetle pro modded for my p20 pro, looking good and only £16, hand one on my htc 10, always dropping it, never a worry...pics to follow
https://www.amazon.es/gp/product/B07CG287PJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
this its perfect to me , he has a tempered glass protector to.
Now it starting to look like something but I'm still looking for something that covers the whole phone, and is easy to put togheter and apart since I want to use it at work. I have a dirty job so..
I remember I've had a full armor case for my HTC one m8, it was waterproof and shock proof and it was like the phone was laying in a bed inside the cover. It was big, but that's ok since I could carry it anywhere at work.
GuessWhoTiger said:
https://www.amazon.es/gp/product/B07CG287PJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
this its perfect to me , he has a tempered glass protector to.
Click to expand...
Click to collapse
I bought these from eBay for like £2 each. They are quite OK. Build quality is crap. Feels like cheap plastic and the phone doesn't look premium at all u line what you see in the images. The cut-out for the fingerprint reader curs off a small bit of the screen about 1mm.and the screen protector cracks very easy. Avoid like the plague especially at that price.
Just get a uag plasma case and put on tempered glass in front. :good:
Huawei P20 Pro Hybrid Belt Clip Holster Case Combo
Jamestdd said:
Just get a uag plasma case and put on tempered glass in front. :good:
Click to expand...
Click to collapse
Check out ebay for this case, Huawei P20 Pro Hybrid Belt Clip Holster Case Combo great protection.
Cant post pic or link yet.
Hope this helps