Just FOR D618/D620 devices with cm11-based ROM!
Kernel was compiled by me from invaderjohn's cm12 sources which adapted for D618 (thanks HoaPham98 for public his changes on github).
KERNEL COMPILED USING LINARO CORTEX-A7 4.9.3 TOOLCHAIN!
My changes in kernel:
Repaired DOUBLE TAP TO WAKE feauture (thanks Quarx for help) - to use it you should install: KeyHandler Patch
[*]Added CPU overclock to 1.6 GHz/underclock to 192 Mhz (default CPU freqs is 0.3-1.2 GHz, so you need to set up overclock and underclock in Kernel Auditor)
[*]Added GPU overclock to 533 MHz
[*]Added support for FAST CHARGE function (disabled by default - for enable use Fast Charge)
[*]Default governor changed to ondemand
[*]Added new CPU governors: INTERACTIVE, INTELLIDEMAND, INTELLIACTIVE, INTELLIMM, ZZMOOVE, YANKACTIVE, SMARTMAX, IMPULSE, ALUCARD, ADAPTIVE, WHEATLEY, DANCEDANCE, LIONHEART, SMARTASSV2 - experimental, on default parametres cpu works on max freq!
[*]Added some new I/O shedulers: BFQ, SIO, SIOPLUS, FIOPS, FIFO, VR, ZEN.
Added support for Faux Sound Control (v3.4) function (to set it up use: FauxSoundControl App)
Added support for KEXEC HARDBOOT (you can use ROM with this kernel as INTERNAL in MultiROM)
Added support for intelli_plug (v3.8) (setting in the Kernel Auditor -> CPU Hotplug)
Installation:
1. Download and put to storage:
D618: >>>LINK<<< (v3.2)
D620: >>>LINK<<< (v3.2)
2. Go to recovery and wipe cache.
3. Flash downloaded .zip and reboot.
4. Reboot again!
5. This is all.
OLD versions
https://yadi.sk/d/yeKNUg2wgtqky
XDA:DevDB Information
Cyanogen11extended Kernel, Kernel for the LG G2 Mini
Contributors
Nikita Pro Android, Quarx
Source Code: https://github.com/NikitaProAndroid/android_kernel_lge_msm8226_g2mds/tree/cyanogenmod
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.2
Created 2015-05-21
Last Updated 2015-05-28
Nikita youre genious!
Radac Stunghthumz said:
Nikita youre genious!
Click to expand...
Click to collapse
So it's working well? Because I didn't test it on HoaPham's cm11, only on latest cm11 ported frm L90.
Yes it works on my friends phone and everything is ok
i'll try it on the MIUI , the vibration work ?
simo14 said:
i'll try it on the MIUI , the vibration work ?
Click to expand...
Click to collapse
I don't know if it will work on MIUI. If it will boot vibration must work. So try, but don't forget to backup boot first!
Works on d620 cm11, some bugs with ondemand governor fixed and vibration works perfect..
Sent from my LG-D620fr [CM11]
anyone having microphone issues during calls?(distorted voice)
using CPA and this kernel with fauxsound and both musicFX and Viper4android disabled.
kokolo15 said:
anyone having microphone issues during calls?(distorted voice)
using CPA and this kernel with fauxsound and both musicFX and Viper4android disabled.
Click to expand...
Click to collapse
Check this POST
EDITED:forgot to add System and dalvik partitions formatting if you use PTT.Sorry!
IMPORTANT:using CPA atm and found out that during calls phone's microphone(headset's microphone works fine)transmits a buzzing sound sometimes.Also my voice sounds a lot deeper and kinda poor quality.
Do not know yet if its kernel related due to faux sound or rom related
EDIT:i managed to fix it (or it fixed itself no fckin clue)by returning fauxsound to stock settings and also using this fix fix .Dont know what fixed it.
Click to expand...
Click to collapse
nkay08 said:
Check this POST
Click to expand...
Click to collapse
you quoted the thing i wrote
im trying to lower the noise of the mic via faux controls havent tested yet.
Stock CPA kernel vs this kernel .
I have problem only with level of output volume signal , Now I must set volume from 50% up to 85% to get real SAME volume , tested . ( on stock lg rom is volume same like on CPA.)
That's only one problem with this kernel for me ( at this time ) on CPA ROM ,tomorrow I will test cm 11 and PAC and other kk ROMs ,maybe it's only CPA s problem.
Any idea how to fix it ?
At this time I use almost max volume (80-85%) or 70 with viper equaliser .
Without this more less little problem it's best kernel for g2m, it's show otg ready we need "only" turn on our voltage booster to work in reverse mode that's all .
Sent from my LG-D620 using XDA Free mobile app
@WoytazZer CZ
Look at OP where @Nikita Pro Android wrote: " Added support for Faux Sound Control (v3.4) function (to set it up use: FauxSoundControl App)". Install that app, and change volume. For any other help search for FauxSound Control.
wujaklija said:
@WoytazZer CZ
Look at OP where @Nikita Pro Android wrote: " Added support for Faux Sound Control (v3.4) function (to set it up use: FauxSoundControl App)". Install that app, and change volume. For any other help search for FauxSound Control.
Click to expand...
Click to collapse
If you install faux sound control mic quality is gonna go downhill.At least that is what happens to me (also am running V4A)we need to find another way to boost headphones.
Talking about CPA.
I don't recommend using ZZMoove CPU Governor. My phone became unresponsive with that governor: When I tried to wake my phone from sleep sometimes it took quite a while for the display to turn on. On top of that I didn't receive some push notifications until I turned my screen on.
I'm currently testing DanceDance governor. I'm looking for a battery friendly governor, that still lets my phone run fluidly.
can you guys post a guide on how to improve the speaker sound and headphones. with viper4android or any app that dsnt break the mic quality. i tried faux and it was very good but then my calls sound like ****.
When i, open faux sound all were set to 0 without Analogous output
Gain , after set it to 0 too it's back on stock level of volume,
But at this time I don't test microphone.
Edit microphone looks good.:thumbup:
Sent from my LG-D620 using XDA Free mobile app
WoytazZer CZ said:
When i, open faux sound all were set to 0 without Analogous output
Gain , after set it to 0 too it's back on stock level of volume,
But at this time I don't test microphone.
Edit microphone looks good.:thumbup:
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
do you also use V4A driver?
Yeah , I use it , now I'm testing microphone and it's look more less good, I was trying to record my voice ( that's look good ) and music ( terrible). I will try to call to someone to test it in call.
Sent from my LG-D620 using XDA Free mobile app
WoytazZer CZ said:
Yeah , I use it , now I'm testing microphone and it's look more less good, I was trying to record my voice ( that's look good ) and music ( terrible). I will try to call to someone to test it in call.
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
ive been testing this issue a lot.long story sort ive found unreliable ways to fix mic quality for everything except phone calls when using fauxcontrols.
Also (i think) i could not revert the dmg done unless i reinstalled the rom.(i made a backup of cpa configured the way i want)
Now I tested PAC man ROM pa and CPA like clear flash - only rom and kernel and its every same , no problem before and after no problem too , but after I unplug headphones and replug in again I must set it again in FS. It's really annoying. But it's work for me on CPA , I download cm 11 and test it on that.
But what's worse for me it's I can not set uc/oc for GPU , for CPU is not problem with kernel auditor or built in system apk(app). And again on all tested ROM .
GPU uc/oc is only for d618 ??
I can not set it on d620r.
Sent from my LG-D620 using XDA Free mobile app
Related
Ok guys this is my first overclocking app, including the following features:
Simple management of Processor Frequencies (Min and max)
Governors management with a gesture (Swipe down)
IO Schedulers management with a gesture (Swipe up) *new
Save as safe feature, wich means you have less chance to make some excesive overclock damage
Run at boot option
Visualization Settings
Requirements:
Android 2.2+
Kernel support for overclocking
Rooted device
Features planned:
-Profiles and notifications
-Voltage control (if kernel supports)
-AutoSet best config *new
Links at second post.
Some screenshots
02/04/2012 - v1.2
Fixed some fc while switching frequences on SeekBar
Fixed wrong sort of frequencies (now always from lesser to greater)
New ICS UI (only for ICS devices)
Almost done time / temperature profiles
Changed write method to command echo "frequency" > /sys/blah...
Current ram usage - 5MB, size 45.9KB
24/01/2012 - v1.1
Profiles implemented
Save as safe feature is better now (long click to show current saved)
Profiles (for now only battery level)
Notification system (also customizable led color settings*)
Independent performance settings submenu (for now just "pi" test, wich means a load test calculating pi number on loops)
Bugfixes and improvements
Current ram usage - 2.3MB, size 45.4KB
*This feature may not work on some devices
20/01/2012 - v1.0
First release
Official List of Current Working Devices:
Samsung Galaxy S / S2 - Fully working
Sony Ericsson Xperia Family - Fully working
Huawei U8800 (IDEOS x5) - Fully working
Milestone 1 - Fully working
LG Optimus One / 2X - Fully working
LG GT540 - Fully working
Which kernel is better for this app??
icerebro said:
Which kernel is better for this app??
Click to expand...
Click to collapse
That doesn't depends on kernel, app will adapt on any kernel if it support overclock (all kernels in mini and mini pro does support oc)
I've tested and works perfectly...!
I used with Naa Kernel and Rom
As soon as I set vlaue 768 and apply phone reboots. I this just me?
hey!! D4.
nice to see u again in this forum. thank you
Banwell13 said:
As soon as I set vlaue 768 and apply phone reboots. I this just me?
Click to expand...
Click to collapse
this happens to me too (not thru the app, i OC using CMsettings) some minipro's can seemingly go only upto 691 MHZ withh one oc module..
for example with nAa kernel i can go only upto 691Mhz but with zombipanic kernel i can go to 800Mhz dunno y...
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
siddardha21 said:
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
Click to expand...
Click to collapse
Nope, GPU clocks seems to be complex to mod. And now im not in vacations so my time is not a lot cuz im almost always busy
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
ciribaski said:
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
Click to expand...
Click to collapse
I will do your first suggestion, was already planned, the other one i dont know if is so relevant
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
DeepUnknown said:
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
Click to expand...
Click to collapse
Could you tell me your Kernel's name (even better upload a screenshot of about phone in settings)?, also 2 more things, is your phone rooted, and did you allow superUser permissions to simple OC ?
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
can i use this to underclock stock kernel?
stemer said:
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
Click to expand...
Click to collapse
Can you upload a screenshot?, that may be because your kernel only supports noop io scheduler.
EDIT: On my stock kernel with no custom io schedulers, the list is reduced, so that does means your kernel only supports Noop scheduler.
romy134 said:
can i use this to underclock stock kernel?
Click to expand...
Click to collapse
Im not sure, but i will try and say you
EDIT: Yes you can, but with the new version, will release soon. Also, sliders cant be moved if your kernel does not support overclock, but you can setup easily a powersave governor, wich will underclock your cpu
universal?
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
esthernrob said:
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
Click to expand...
Click to collapse
My aim is to make it universal and lightweight as hell! ill need support from all devices owners, for now, it should work on any device, anyway please test it. I will release a "more universal" version soon, im talking about 2 days, almost done now.
ok nice app but its been done alread about the exac same thing with NOFRILLS CPU thats out in the market for free and has been out longer and suports more languages . so dont know why this app got recognition on xda while nofrills cpu didnt and its been out longer... if anyone intrested look up nofrills cpu its the same thing ..... ps. im not tolling or hateing just thought id point it out ...
Code:
For Xperia Z Ultra only!
*** Disclamer
[B][COLOR="Red"]This requires an unlocked bootloader[/COLOR][/B]
This is an AOSP kitkat kernel for Xperia Z Ultra only!
[B][COLOR="Red"]I am not responsible if you brick your device[/COLOR][/B], but I will try to help you if things go wrong.
Introduction
This is a kernel I tweaked for RevolutionRom on Xperia Z1 and Z Ultra. This kernel is tweaked for better performance, battery life and smoothness. It works on all kitkat roms available for Xperia Z1.
It works on:
- Omni Rom, android 4.4 (not released yet, still testing this)
- RevolutionRom, android 4.4
- CM11, android 4.4 (will release an unofficial release soon probably)
You can find my sources on github: RevolutionDev kernel on github
Click to expand...
Click to collapse
Features
- Dual recovery: CWM Touch (Volume up) and TWRP Touch recovery (volume down)
- Faux Sound control
- GPU OC upto 600MHz
- Booting up at 2.1GHz (stock speed)
- Add OC upto 2,342 GHz
- Added VDD (Voltage Control)
- Extra Governors: Badass, Wheatley, Lionheart
- Extra I/O schedulars: Row, SIO, Fiops, BFQ
Click to expand...
Click to collapse
Installation instructions
- Reboot into fastboot
- Flash boot.img:
Code:
fastboot flash boot RevolutionKernel-ZU-v#.img (replace # with version nr)
fastboot reboot
- Enjoy
[/QUOTE]
Download
- RevolutionKernel v1.1
Click to expand...
Click to collapse
Changelog
Code:
== RevolutionKernel v1.1 [29/11] ==
Fix recovery?
== RevolutionKernel v1 [28/11] ==
- Initial release
- Dual recovery: CWM Touch and TWRP Touch recovery
- Faux Sound control
- GPU OC upto 600MHz
- Booting up at 2.1GHz (stock speed)
- Add OC upto 2,342 GHz
- Added VDD (Voltage Control)
- Extra Governors: Badass, Wheatley, Lionheart
- Extra I/O schedulars: Row, SIO, Fiops, BFQ
Click to expand...
Click to collapse
Thanks to:
Code:
- DooMLorD, Faux123 and a lot of other devs!
- sony for kernel sources
XDA:DevDB Information
[Android 4.4]RevolutionKernel for all kitkat source based roms [28/11], a Kernel for the Sony Xperia Z Ultra
Contributors
krabappel2548
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1 and future versio
Stable Release Date: 2013-11-29
Created 2013-11-29
Last Updated 2013-11-29
Reserved
== Kernel FAQ - GPU OC - Voltage Control - Sound Control==
Entering recovery
While booting, your device will vibrate and LED will turn puple while you see the sony kernel logo. When the phone vibrates, you need to press volume up or volume down to enter the recovery you like:
- Volume up: CWM Touch recovery
- Volume down: TWRP Touch recovery
GPU OC
OVERCLOCKING GPU WILL REDUCE BATTERY LIFE!
you can overclock/underclock GPU manually via scripts/commands...
[ how to do this manually/script ]
To check current max clock of GPU clock use:
Code:
cat /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/max_gpuclk
To set GPU to particular frequency (overclock or underclock) use:
Code:
echo 533333000 > /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/max_gpuclk
available scaling frequencies are:
Code:
[LIST]
[*]600000000 - 600 MHz
[*]533333000 - 533 MHz
[*]450000000 - 450 MHz (DEFAULT)
[*]320000000 - 320 MHz
[*]200000000 - 200 MHz
[/LIST]
Voltage Control
All credits for this interface go to Faux123!
WARNING!
DO NOT USE TOO HIGH OR TOO LOW VOLTAGES, SLOWLY increase the voltage one notch at a time for a particular frequency and do stability/testing for few hours. once you have verified that you CPU chip can handle that voltage ONLY then "Set at boot"/Use init.d script
You can either use an APP (like IncrediControl) [others mentioned in OP] or use an init.d script to do the work...
to see current voltage table use:
Code:
[B]cat /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
to set voltage for a particular frequency:
Code:
[B]echo 1512000 1150000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
will set 1512Mhz freq voltage at 1150mV
to reduce voltages for ALL frequencies:
Code:
[B]echo -25000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
to increase voltages for ALL frequencies:
Code:
[B]echo +25000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
Sound Control
Kernel level Sound Control
This feature has been added by faux123 himself!
The sources for this feature are covered under GPL and are released along with my kernel sources at my GITHUB repo.
[ WARNING ]
high volume can damage hearing!
Krabappel2548, DooMLoRD or faux123 are not to be held responsible if this damages ur headphones/speakers/etc
USE THIS AT YOUR OWN RISK!
There are two ways to use this interface.
manual control through sysfs interface
paid app (FauxSound Audio/Sound Control)
How to use the app FauxSound Audio/Sound Control is pretty self explanatory so I will write on how to control using the sysfs interface...
BEFORE DOING ANY ADJUSTMENTS EXIT THE APPS LIKE MUSIC PLAYER/etc!!
The interface to control the sound output is located at:
Code:
[B]/sys/kernel/sound_control_3[/B]
it has 4 control interfaces:
Camera MIC
Code:
/sys/kernel/sound_control_3/gpl_cam_mic_gain
Headphone
Code:
/sys/kernel/sound_control_3/gpl_headphone_gain
MIC
Code:
/sys/kernel/sound_control_3/gpl_mic_gain
Internal Speaker
Code:
/sys/kernel/sound_control_3/gpl_speaker_gain
each supports gain levels from 20 (-20) to 50 (+10), base is 40 (0)
(the number in the brackets correspond to the numbers displayed in the app)
say if u want to boost headphone output (both left and right channels) then use the following command:
Code:
echo "44 44" > /sys/kernel/sound_control_3/gpl_headphone_gain
u can also individually increase/decrease the gain for each right and left channel
similarly other interfaces can be controlled
TIP:
do not jump to maximum values as sometimes the headphones/speakers might start distorting the audio... slowly increase and do testing for the levels which suit you!
not all accessories will work well with boosted audio output
Thanks to romers,we can enjoy this powerful device! May I ask when does the rom release?And I can not wait! Thanks for romers!
fbfree said:
Thanks to romers,we can enjoy this powerful device! May I ask when does the rom release?And I can not wait! Thanks for romers!
Click to expand...
Click to collapse
I just released omnirom and revolutionrom is already available
Jozinek said:
sorry for question, but when to push volume button to start recovery? I try before LED blink, when LED blik, after LED blink, sometimes only once push, sometimes more, but only one succes enter to recovery from about 30 times
Click to expand...
Click to collapse
- Turn your phone off
- Press power button and immediately press and hold volume up
You'll see that the LED turn purple before it turns green for 2 seconds, and then you'll be in recovery. Let go of the volume button when you see the purple LED or when it vibrates.
Sent from my C6833 using Tapatalk
krabappel2548 said:
I just released omnirom and revolutionrom is already available
Click to expand...
Click to collapse
Anyway you make a contribution to the device, and I can do nothing:crying:
fbfree said:
Anyway you make a contribution to the device, and I can do nothing:crying:
Click to expand...
Click to collapse
Well, you can if you really want to Start reading!
Sent from my C6833 using Tapatalk
One special request if possible.
Could we get the slide to wake and slide to sleep feature please
Sent from my Xperia Z Ultra using Tapatalk 2
Sweet an OCed kernel. Cant wait to try this and report back tomorrow as soon as I get the phone...I am addicted to Ocing
shaolin95 said:
Sweet an OCed kernel. Cant wait to try this and report back tomorrow as soon as I get the phone...I am addicted to Ocing
Click to expand...
Click to collapse
Remember to backup your TA partition before you start playing around with custom ROMs and kernels.
Update coming up, newer prima wifi files Any other feature requests for this kernel?
krabappel2548 said:
Update coming up, newer prima wifi files Any other feature requests for this kernel?
Click to expand...
Click to collapse
awesome news..
i have a question for you...about the fauxsound patches you've made this kernel with...
i've not been able to retain any of my custom values on faux sound app as well as trickstermod... bought donate versions of both apps and still no luck... i have to have the sound control app running everytime i open the music application .. if i close that app, my settings get reset... i never had this problem with fancy kernel on my old galaxy nexus... i used to just use free version of trickstermod too... and my settings were always retained, even on boot... using this kernel, forget reboot, even not having the fauxsound/trickstermod app running in the background or just closing the music app, resets all customized value... not use if this characteristic is specific to your kernel or to Z Ultra... coz none of the other kernels available for the phone supports sound control anyway... so no other kernel to compare with... if there's a workaround, let me know... if its a bug, hope u can fix in the upcoming update.... thnx man... hope ur exams went well.
spicemaster said:
awesome news..
i have a question for you...about the fauxsound patches you've made this kernel with...
i've not been able to retain any of my custom values on faux sound app as well as trickstermod... bought donate versions of both apps and still no luck... i have to have the sound control app running everytime i open the music application .. if i close that app, my settings get reset... i never had this problem with fancy kernel on my old galaxy nexus... i used to just use free version of trickstermod too... and my settings were always retained, even on boot... using this kernel, forget reboot, even not having the fauxsound/trickstermod app running in the background or just closing the music app, resets all customized value... not use if this characteristic is specific to your kernel or to Z Ultra... coz none of the other kernels available for the phone supports sound control anyway... so no other kernel to compare with... if there's a workaround, let me know... if its a bug, hope u can fix in the upcoming update.... thnx man... hope ur exams went well.
Click to expand...
Click to collapse
I'll check faux's github for some updates about this Maybe it's because of 4.4 and it needs updates
krabappel2548 said:
I'll check faux's github for some updates about this Maybe it's because of 4.4 and it needs updates
Click to expand...
Click to collapse
not 4.4 mate... had the same problem when i was running your 4.3 carbon build as well.
krabappel2548 said:
Update coming up, newer prima wifi files Any other feature requests for this kernel?
Click to expand...
Click to collapse
Any joy with getting mobile data to work mate?
Mr. Droid said:
One special request if possible.
Could we get the slide to wake and slide to sleep feature please
Sent from my Xperia Z Ultra using Tapatalk 2
Click to expand...
Click to collapse
Could we get this request please ?
It's available on the nexus devices anz the HTC one and it will be perfect for a big device as ours
Sent from my Xperia Z Ultra using Tapatalk 2
Mr. Droid said:
Could we get this request please ?
It's available on the nexus devices anz the HTC one and it will be perfect for a big device as ours
Sent from my Xperia Z Ultra using Tapatalk 2
Click to expand...
Click to collapse
As long as we can disable it (for battery life sake)
Sent from my C6833 using Tapatalk
iBuzman said:
As long as we can disable it (for battery life sake)
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
It's usually an option to enable via faux app so ya it'll be perfect
Sent from my Xperia Z Ultra using Tapatalk 2
iBuzman said:
As long as we can disable it (for battery life sake)
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yea on my nexus 5 they ate the battery real bad. Sweep to wake and double tap to wake as well. The process basically keeps your screen on hence the high battery drain. Used k-control app for faux trinity bricked and franco kernels
Sent from my Xperia Z Ultra using XDA Premium 4 mobile app
Very kernel I must say, only it seems after flashing it changes product name to 'honami' (Z1) so trying to flash anything for Z Ultra (togari) ends up with status 7. Just a detail
thanks to
@sleekmason for his tutorial
@franciscofranco for his sources and hotplug algorithm
@oubeichen for msm_kcal_ctrl port
Features:
-franco hotplug algorithm
-custom thermal throtteling
-cpu: interactive
-uv: table exposed
-faux123 gamma control
-various fixes and optimizations
changelog:
v28: 17.08.2015
-updated to newest changes
-removed synapse (flash it yourself)
-governor is conservative now
-reverted some changes to hotplug
-scheduler: noop
-updated toolchain
-livebump instead of loki
-official CM only
how to change hotplug values
the values are located in
Code:
/sys/class/misc/mako_hotplug_control/
there you have
cpufreq_unplug_limit
Code:
if frequency is higher than this cores wont be offlined for a period
max_load_counter
Code:
maximal samples counted to offline cores (higher values = longer time to offline core)
high_load_counter
Code:
- info missing yet -
load_threshold
Code:
threshold to online a core
min_time_cpu_online
Code:
minimum time a core stays online
timer
Code:
samples per second (1 = 10 samples; higher values = less samples)
brightness
If you experience brightness issues it is because you are using base 4.2.2
to avoid issues flash 4.4.2 base
you can find a flashable zip here:
http://forum.xda-developers.com/showthread.php?t=2762526
reboot or crash?
send me last_kmsg
BACKUP BOOT AND SYSTEM FIRST!
Download !!!OFFICIAL CM ONLY!!!: https://www.androidfilehost.com/?fid=24052804347795577
XDA:DevDB Information
mani.Kernel, Kernel for the LG G Pad 8.3
Contributors
ckret
Source Code: https://github.com/drbeat/kernel_lge_v500
Kernel Special Features: franco hotplug, UV table, gamma adjustment, custom thermal throtteling
Version Information
Status: Stable
Created 2015-01-23
Last Updated 2015-08-17
Is this for AOSP?
Inviato dal mio LG-V500 utilizzando Tapatalk
Rapepini said:
Is this for AOSP?
Inviato dal mio LG-V500 utilizzando Tapatalk
Click to expand...
Click to collapse
yes its for aosp
Cool, a new kernel ! Small question before I make the jump : what do you mean, generic touchboost not working ? Is this an issue for everyday use ?
Generic touchboost is a generic driver for boosting up the CPU in touch
Franco has this in his kernels but i couldnt make it work
So i implementend the touchboost in the existing lge touch driver
Shouldnt be an issue for usage since i am using this kernel myself as daily driver
Working great so far. Using on vanir ROM. Thanks!
How far have u overclocked it. And how does it perform
zombieryder said:
How far have u overclocked it. And how does it perform
Click to expand...
Click to collapse
Didnt overclock it
Never said i did
They pad has a quadcore with 4x1.7 GHz
No need for oc
I tried running this on the following ROM:
[ROM][v500][KK][4.4.4][LINARO/SABERMOD] AOKP [WEEKLY BUILDS][20140705]
The first issue I ran into was that the screen brightness was locked at the highest level. I have read that you need to have the 4.4.2 base when running these 4.4.4 ROMs in order for screen brightness to work. It looked to me like installing this kernel upgraded to the 4.4.4 base, which would explain why that became broken.
Is it therefore safe to assume that this kernel is only for ROMs running the 4.4.4 base and not the 4.4.2 base?
Thanks
Well, no problem with autobrightness for me, and I have switched to 4.2.2 base to avoid the dim screen at startup. Been running it for the biggest part of the day, and found no real issue for now. Good work.
As for what doesn't seem to work, I was thrilled to see the gamma option in trickster mod, and thought I would be able to calibrate my screen correcly for the first time. Sadly, it seems the changes are registered (Trickster mod says they are saved allright), but there is no evolution whatsoever : the screen stays the same (and believe me, I have tried the most extreme settings to be sure I would notice the subtlest of changes).
i dont know about the bases
i think i have the 4.2.2 base but i am not sure
and currently gamma is not working. i am looking into that, but it seems quite hard
ckret said:
i dont know about the bases
i think i have the 4.2.2 base but i am not sure
and currently gamma is not working. i am looking into that, but it seems quite hard
Click to expand...
Click to collapse
Well at least, the option shows up in trickster mod, so I guess you're not so far from it. Anyway, your kernel seems to run very well. Thanks!
For sure opened the brightness...in fact ALL the way & no way to lower more.
Also, I lost sound.(Not for sure now about that one) All else fine, but NO gama control, and no 'on demand' - only 'interactive & 2 others'...
So giving it up for now, but thank you for the compiling & I'm sure you'll get it right next time!
Cal-123 said:
For sure opened the brightness...in fact ALL the way & no way to lower more.
Also, I lost sound.(Not for sure now about that one) All else fine, but NO gama control, and no 'on demand' - only 'interactive & 2 others'...
So giving it up for now, but thank you for the compiling & I'm sure you'll get it right next time!
Click to expand...
Click to collapse
i am aware of the brightness problem
gamma control not yet given, since i cant find the gamma address
interactive is optimized so its selected as default in this kernel
v3 feels alot smoother
dont know if there are any issues with cabc enabled
you gotta try out and report me
Running v3 on Mahdi. Smooth so far. Will report back in a few days.
Sent from my LG-V500 using Tapatalk
I was testing v3 and brightness value is fixed and wont change for me. I'm using CM11 M8.
wind0zer said:
I was testing v3 and brightness is fixed and wont change for me. I'm using CM11 M8.
Click to expand...
Click to collapse
The brightness seems to be *the* big issue with all the kernel builds. But when mentioned to other kernel builders or porters, they don't understand the 'why' of the need for more brightness. I feel the same way...I would like to be running at 40% brightness and see everything OK, but just so I could possibly save some battery 'time'. But frankly I really don't know why - 5 or more hours is long enough in one day on a tablet for me. Seems to be enough for Oubeichen, who I think is a fine kernel analyzer or porter.
What I would like to see is what Oubeichen put into this kernel found here and which I'm running but is v3.4.xxx (can't remember! and am on a computer now):
http://forum.xda-developers.com/showpost.php?p=54153699&postcount=196
Even though this is early version kernel, I'm running it with no problems - it has about 7 or 8 Processor settings such as Progressive, Conservative...etc. and several I/O's such as Noop and all the others that are not shown on the later 3.4.0 kernels. Nice settings to have to play around with IMO.
As aicjofs said brightness is a BASE issue
If you run the kernel on the 4.4.2 base you will have no Problem
I can compile it for your 4.2.2 base but i dont just geht why you dont upgrade
Having 1000000 options isnt as good as having optimized options
If you want to know what the issue is you have to look jnto the AIC thread. He stated the difference for autobrightness on the bases
i have added a sys interface so ppl with 4.2.2 base can also use this kernel
just read first post
Test Kernel
Disclaimer
I'm not responsible for bricked devices, dead SD cards, etc.
This works only on Nougat.
Features
Built with latest UberTC 4.9
Optimized Sfck compression
Reduced log spam
Disabled add_random
Disabled CRC
Ultra Kernel Same-page Merging
Enabled JUMP_LABEL
Reduced load average
Reduced wakelocks
Reduced R/W operations
USB fast charge enabled by default
Implemented Powersuspend
Small CPU undervoltage
320K AAC encoding
Optimized ROW
Optimized CFQ
Optimized BFQ
Optimized Deadline
Sioplus scheduler
Zen scheduler
Reduced swap usage
Implemented Adreno idler
Westwood is the default TCP cong
Other.
Installation guide
Flash through TWRP
Enjoy!
Download
Folder.
Credits
LineageOS team for their great work
@scafroglia93 for his help
Commits authors
UberTC developers
@osm0sis for AnyKernel2.
XDA:DevDB Information
Test Kernel, Kernel for the Moto X Play
Contributors
axxx007xxxz
Source Code: https://github.com/axxx007xxxz/test_kernel_motorola_msm8916-n/tree/test
Kernel Special Features:
Version Information
Status: Stable
Created 2016-10-09
Last Updated 2018-04-29
Changelogs list
v2_r7
Code:
- Updated UberTC 4.9
- Reduced modules size
- Implemented UKSM (Ultra Kernel Same-page Merging)
- TCPs are now included in the Kernel (not as modules anymore)
- All security updates, SDCardFS patches, Prima driver updates and other stuff from LineageOS
- Updated AnyKernel2
v2_r6
Code:
- Use noatime attribute to reduce write operations on memory
- Reduced load average
- Implemented USB fast charge enabled by default (improve charging with the computer)
- All security updates, drivers updates and other stuff from LineageOS
- Reduced more log spam
v2_r5
Code:
- Updated UberTC 4.9
- Optimized Sfck compression
- Implemented Powersuspend (improve battery usage)
- Updated random (backported from 4.1.31)
- Implemented Adreno idler (useful if you use msm-adreno-tz governor for GPU)
- All security updates, SDCardFS patches, Prima driver updates and other stuff from LineageOS
- Reduced swap usage (preserve internal memory)
v2_r4
Code:
- Updated UberTC 4.9
- Rebased on CM 14.1 sources
- Small CPU undervoltage to avoid overheating issue
- Updated AnyKernel2 with some improvements
v2_r3
Code:
- Included Dirty Cow security fixes
- Use Westwood as TCP cong
- Removed duplicated Wi-Fi module
- Disabled debugs
v2_r2
Code:
- Removed Bluactive governor
- Removed Lionfish governor
- Enabled JUMP_LABEL (it should improve performance)
v2_r1
Code:
- First release
Reserved
led notification support?
diegomartinezlovey said:
led notification support?
Click to expand...
Click to collapse
No, it depends by the ROM too.
thanks for the kernel, which is the recommended configuration @axxx007xxxz
Enviado desde mi XT1563 mediante Tapatalk
[email protected] said:
thanks for the kernel, which is the recommended configuration
Click to expand...
Click to collapse
You're welcome.
The default configuration (Interactive + Zen) is good.
OK it's only been a few hours but battery already looks better with this kernel. I'm using lionfish + fiops. Good stuff.
Sent from my XT1563 using Tapatalk
Since flashing this kernel, I have no call function. Keeps ending milliseconds after calling.
Any suggestions?
Sent from my XT1562 using fingers
EDIT: fine now. Had to adjust APN settings
So while the kernel seems to boost battery life with the right governor, it also seems to cause the phone to freeze up randomly and eventually reboot, at least with the 10/09 build of the AOSP Nougat ROM. It happened a few times after the screen had gone to sleep and it just wouldn't come on again. I only tried 2 governors - lionfish and bluactive - so I have no idea whether it's the governors or the kernel.
Sent from my XT1563 using Tapatalk
cucumbers said:
So while the kernel seems to boost battery life with the right governor, it also seems to cause the phone to freeze up randomly and eventually reboot, at least with the 10/09 build of the AOSP Nougat ROM. It happened a few times after the screen had gone to sleep and it just wouldn't come on again. I only tried 2 governors - lionfish and bluactive - so I have no idea whether it's the governors or the kernel.
Click to expand...
Click to collapse
It works fine for me with latest AOSP 7 build. Try with Interactive.
LED notification light works flawlessly. Just use ex kernel manager and enable led trigger
Bhishma2 said:
LED notification light works flawlessly. Just use ex kernel manager and enable led trigger
Click to expand...
Click to collapse
Good to know, thanks for report.
Kernel looks great, no issues yet. With standard settings. ^^ Hope for updates in the future
The phones does go to hard sleep if governor is lionfish. Interactive seems fine.
Sent from my du_lux using XDA Labs
axxx007xxxz said:
It works fine for me with latest AOSP 7 build. Try with Interactive.
Click to expand...
Click to collapse
Well the whole point - for me - of installing the kernel was to try goverors other than interactive That said, I did give Interactive a try, and I got a reboot. But I was suspecting the problem might be the Instagram app, which I installed right after flashing the kernel the first time. Sure enough, removing Instagram has gotten rid of the problems with all the governors I have tried - no more reboots or freeze-ups.
To be honest Instagram might even cause problems with AOSP 7 even without this kernel, I have to admit I haven't tested that (though I don't think so). In any case, beware the Instagram app...
K.khiladi said:
The phones does go to hard sleep if governor is lionfish. Interactive seems fine.
Click to expand...
Click to collapse
It's definitely a Lionfish related problem. Thanks for report.
cucumbers said:
Well the whole point - for me - of installing the kernel was to try goverors other than interactive That said, I did give Interactive a try, and I got a reboot. But I was suspecting the problem might be the Instagram app, which I installed right after flashing the kernel the first time. Sure enough, removing Instagram has gotten rid of the problems with all the governors I have tried - no more reboots or freeze-ups.
To be honest Instagram might even cause problems with AOSP 7 even without this kernel, I have to admit I haven't tested that (though I don't think so). In any case, beware the Instagram app...
Click to expand...
Click to collapse
You may have something else going on in your phone. I am using it on 7.0 and it works perfectly.
Sent from my du_lux using XDA Labs
---------- Post added at 06:34 PM ---------- Previous post was at 06:34 PM ----------
axxx007xxxz said:
It's definitely a Lionfish related problem. Thanks for report.
Click to expand...
Click to collapse
Yes, and someone reported problem with the Blu active governor as well.
Sent from my du_lux using XDA Labs
K.khiladi said:
You may have something else going on in your phone. I am using it on 7.0 and it works perfectly.
Sent from my du_lux using XDA Labs
---------- Post added at 06:34 PM ---------- Previous post was at 06:34 PM ----------
Yes, and someone reported problem with the Blu active governor as well.
Sent from my du_lux using XDA Labs
Click to expand...
Click to collapse
I spoke too soon. Another reboot with Interactive, but without Instagram - so it's not that. Suspect it's Greenify actually, I had it in Shallow Hibernation (forgot, thought I had turned it off). Would be consistent with the issues I had with bluactive and lionfish, and the issues reported above.
Bhishma2 said:
LED notification light works flawlessly. Just use ex kernel manager and enable led trigger
Click to expand...
Click to collapse
What value do I set for notification light? I can see for charging, etc but no notification.
*** This kernel is now end-of-life and not supported nor actively developed anymore !!! ***
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than five years to OnePlus 5, 3T, 3, 2, one and X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus 5T device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
To add: A community build is NOT an official build supported here. If you use a community build and have issues, don't complain or even report.
Important notes
Read first, especially when you are new to my kernels:
http://wiki.boeffla.de
Boeffla-Kernel uses the anykernel concept = Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting change log...)
Change log for OxygenOS 5.x.x kernel - Click here
Change log for OxygenOS 4.x.x kernel - Click here
Known issues
none known
Features
Note: This kernel only runs on OOS 4.x.x for the OnePlus 5T - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.5.10 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: zzmoove, blu_active, impulse, cultivation
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
Underclocking CPU and GPU supported
No CPU and GPU overclocking (not planned too)
No CPU and GPU voltage interfaces (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5T does not hotplug based on load)
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Boeffla generic wakelock blocker
Control haptic feedback of gestures (except fingerprint)
Haptic feedback intensity control (from 0 to 25, with 25 being 100%)
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Swap supported
Wireguard supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Fully supports OOS device encryption, but does not force it
Integrated full busybox 1.27.2 (own compilation)
Compatible with systemless root
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8998)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app Boeffla-Config V2 from the downloads section on www.boeffla.de.
You need at least version 2.5.10 or higher for the OnePlus 5T Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* eng.st
* flar2
* arter97
* Grarak
* Entropy512
* Faux
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
OOS4
http://kernel.boeffla.de/oneplus5t/boeffla-kernel-oos/oos4xx/changelog.htm
--- Reserved ---
WHAT MAKES YOU THINK I WILL MAKE A KERNEL FOR ONE PLUS 5 T ?????
Sendt fra min SM-N950F med Tapatalk
Thread opened.
First beta version has just been released - 1.0-beta1.
Feature list, see OP.
Have fun
Andi
Is it compatible with open beta 2 ?
Awesome.. Was waiting for your Kernel
zebasketteur said:
Is it compatible with open beta 2 ?
Click to expand...
Click to collapse
I would assume not, as in title is says OOS 4
---------- Post added at 02:42 PM ---------- Previous post was at 02:05 PM ----------
Just flashed, seems that the max brightness is lower, with the display backlight settings unchanged. Apart from that all seems to be good.
Nice to see you here! I have use your kernels starting with Samsung S3 and after that many many devices and always being good!
zebasketteur said:
Is it compatible with open beta 2 ?
Click to expand...
Click to collapse
This is very clearly stated in the opening post.
No.
Hetex said:
[/COLOR]Just flashed, seems that the max brightness is lower, with the display backlight settings unchanged. Apart from that all seems to be good.
Click to expand...
Click to collapse
This is not changed by me. As long as you do not play in the app with the settings, this is 1:1 as in stock kernel.
Anyone else? I mean, nothing is impossible of course.
Andi
Lord Boeffla said:
This is not changed by me. As long as you do not play in the app with the settings, this is 1:1 as in stock kernel.
Anyone else? I mean, nothing is impossible of course.
Andi
Click to expand...
Click to collapse
Not sure if it is the same problem but in the first release of elementalX kernal, whether the brightness dimmer was enabled or not the brightness at maximum was half of what it should have been.
Thanks.
Lord Boeffla said:
This is not changed by me. As long as you do not play in the app with the settings, this is 1:1 as in stock kernel.
Anyone else? I mean, nothing is impossible of course.
Andi
Click to expand...
Click to collapse
You have to revert THIS exact commit in order to fix that (not working anymore on OP5T)
Welcome to OP5T mate btw :highfive:
Cheers'
Hello Boeffla
Hetex said:
Not sure if it is the same problem but in the first release of elementalX kernal, whether the brightness dimmer was enabled or not the brightness at maximum was half of what it should have been.
Thanks.
Click to expand...
Click to collapse
Good hint. Will check in that direction when more people are sure this brightness thingy is real.
Update: Analysis started...
Andi
Lord Boeffla said:
Good hint. Will check in that direction when more people are sure this brightness thingy is real.
Update: Analysis started...
Andi
Click to expand...
Click to collapse
Ok, issue analyzed, confirmed to be a bug.
Bug is fixed and beta2 already compiling. Stay tuned. And thanks for the report.
(BTW it was not the brightness dimmer but a changed brightness range sent by the rom to the kernel, so the min/max limiter was cutting too early)
Thanks
Andi
AndroidGX said:
You have to revert THIS exact commit in order to fix that (not working anymore on OP5T)
Welcome to OP5T mate btw :highfive:
Cheers'
Click to expand...
Click to collapse
Thanks. Sorry, did not see your post as I was busy analyzing.
Well... reverting a commit and losing the functionality is not the option when I can fix it, eh? :fingers-crossed:
And so I did.
MrTalon4 said:
Hello Boeffla
Click to expand...
Click to collapse
Hello MrTalon4
Andi
Hi all,
small bugfix update is out:
Version 1.0-beta2
18.01.2018
Fix: Backlight limit implementation adjusted to OP5T (display could never reach maximum brightness before)
Enjoy
Andi
Welcome,it is nice to see you here ..waiting one for oreo
marko94 said:
Welcome,it is nice to see you here ..waiting one for oreo
Click to expand...
Click to collapse
Yeah. But not before it gets out of open beta, not before it is released officially.
... my golden rule for a long time.
Andi
Welcome to the 5T-Zone
Is it possible to have WireGuard implementation for your new 5T kernel (at some point in the near future) ?
Edit:
I just rechecked the OP, already there. Too cool