Related
So today I was running my Galaxy 2 like any other regular phone. I had pulled it out of my pocket and was listening to some music whilst playing some game that I recently downloaded from the Android Market. Before I started playing it I recall my battery was at 18%.
Then all of a sudden.
My screen turned off.
I thought hmm. Maybe it just turned off. Attempted to turn it back on. Nothing.
I started to worry.
So I tried to boot my device in download mode or recovery mode.
Nothing
Even more worringly I attempted to charge my phone to see if the charging thing would pop up.
Nothing at all.
So I'm wondering if my GalaxyS2 has died?
At the time I was running CM7.1 Nightly 81 with Siyahs 2.0 beta 6.
any chance of claiming it on warranty as they can't check the actual phone for flashes, or a possible solution?
Hey, sounds ugly.
Did you leave the phone plugged in for some time? because I think the phone needs some juice, when it was down to zero battery, before it will show anything on the screen.
For your warranty, You know I would first try everything to get it back by yourself and if nothing is going to work then I would guess the sammy guys can't do much either. So if you send it back then and you get a new one be happy, if not yeah you know hope that it will not cost too much. Good luck dude.
Try to pull out the battery and put it back in and plug in the charger and let it be for som time.
Well **** me sideways....
On the way back home from the vendor to get the charger my phone turned on.
Like... What the actual hell???
Its currently charging in my USB.
I just tried flashing an old backup I had and that didn't work for some strange reason.
I'm going to try and flash a stock rom from the USB and see what happens. Not willing to turn it off though.
giga502 said:
Well **** me sideways....
On the way back home from the vendor to get the charger my phone turned on.
Like... What the actual hell???
Its currently charging in my USB.
I just tried flashing an old backup I had and that didn't work for some strange reason.
I'm going to try and flash a stock rom from the USB and see what happens. Not willing to turn it off though.
Click to expand...
Click to collapse
Ah great news....is it still on ?
But I would recommend using stock for a while to see if this problem comes up again.
But as you are using a CM nightly that might be the reason for the problem.
brunobanane said:
Ah great news....is it still on ?
But I would recommend using stock for a while to see if this problem comes up again.
But as you are using a CM nightly that might be the reason for the problem.
Click to expand...
Click to collapse
Well. I'm trying to flash a stock rom.
But whenever I go to the recovery menu some error pops up
can't access to system csc kor system
and it gives me a very limited recovery menu...
hmmm
giga502 said:
Well. I'm trying to flash a stock rom.
But whenever I go to the recovery menu some error pops up
What has the recovery menu got to do with flashing a stock rom ???
can't access to system csc kor system
Why
and it gives me a very limited recovery menu...
Its a non CWM recovery then probably 3e Samsung Recovery .
CWM or recovery is not used to flash stock rom .
jje
Click to expand...
Click to collapse
JJEgan said:
giga502 said:
Well. I'm trying to flash a stock rom.
But whenever I go to the recovery menu some error pops up
What has the recovery menu got to do with flashing a stock rom ???
can't access to system csc kor system
Why
and it gives me a very limited recovery menu...
Its a non CWM recovery then probably 3e Samsung Recovery .
CWM or recovery is not used to flash stock rom .
jje
Click to expand...
Click to collapse
ahh yes that is the one. Thankyou!
I'm now using Odin to flash litnin rom 6.1
if I can get into download mode....
Click to expand...
Click to collapse
after i root my phone i cant access my phone its frozen on with this triangle icon and samsung logo. please help i tried everything from rebooting to removing my battery
virusgandu said:
after i root my phone i cant access my phone its frozen on with this triangle icon and samsung logo. please help i tried everything from rebooting to removing my battery
Click to expand...
Click to collapse
Any more details?
Such as exact phone model (GT-I9100/T/M/...), firmware version (ROM/PDA/kernel), what rooting method have you used, etc.
If you can boot into download mode (Volume Down + Home + Power), then you can flash another kernel (such as CF-Root) with Odin to your phone.
Good luck !
GT-I9100 thats the only thing i know. i cant even open the phone only (Volume Down + Home + Power) is working i tried that but is not working. i used kernel method i tried almost ever thing but nothing works. im from asia
virusgandu said:
GT-I9100 thats the only thing i know. i cant even open the phone only (Volume Down + Home + Power) is working i tried that but is not working. i used kernel method i tried almost ever thing but nothing works. im from asia
Click to expand...
Click to collapse
That happened to me. Make sure you do the volume down+ home+ power right to enter the download mode, then flash the CF or Siyah kernel with Odin v1.7 (not v1.85).
See if it boots from there. You may need to flash some firmware (PDA) with Odin once you see it boots.
Good luck
Thanks man its working now
help me please, frozen sgs2 after rooting
antonio1475 said:
That happened to me. Make sure you do the volume down+ home+ power right to enter the download mode, then flash the CF or Siyah kernel with Odin v1.7 (not v1.85).
See if it boots from there. You may need to flash some firmware (PDA) with Odin once you see it boots.
Good luck
Click to expand...
Click to collapse
Hi!
Please help me...i got the same problem...i rooted my sgs2 and now is frozen...i tried with odin 1.7 but nothing happened...im from venezuela
i download cf-root, odin 3 v.1,85(the first time), my kernel is 3.0.15 UH...(i guess)
maybe the kernel was the problem...i dont know
i had ICS too...
are there any chance i can "unroot" my phone? i tried to wipe,but nothing...indeed, i opened recovery mode, i wipe all and i read Error mounting sd card...
i hope you can help me...sorry for my English
Please help me
lnzmrtn said:
Hi!
Please help me...i got the same problem...i rooted my sgs2 and now is frozen...i tried with odin 1.7 but nothing happened...im from venezuela
i download cf-root, odin 3 v.1,85(the first time), my kernel is 3.0.15 UH...(i guess)
maybe the kernel was the problem...i dont know
i had ICS too...
are there any chance i can "unroot" my phone? i tried to wipe,but nothing...indeed, i opened recovery mode, i wipe all and i read Error mounting sd card...
i hope you can help me...sorry for my English
Please help me
Click to expand...
Click to collapse
"Nothing happened" is not useful. Let me know the exact error and how is your phone working right now (booting, not booting...)
what Kernel did you flash?
Help
Hey... i have the same problem as the first guy.
Next i tried the odin 1.7 but nothing it's allways the same.
plz help me as soon as you can.
monkeytribute said:
Hey... i have the same problem as the first guy.
Next i tried the odin 1.7 but nothing it's allways the same.
plz help me as soon as you can.
Click to expand...
Click to collapse
Let's go slow.
You managed to flash something via ODIN? Or it failed?
Since you rooted it (same as first guy), I guess it flashed so Odin detects the phone and is able to flash, right?
Explain the exact problem. What are you trying to flash?
Try downloading Siyah kernel for Odin, or Dream kernel for Odin to flash it and make it boot. If not, download an official firmware and try.
Anyway, reply the 2 bold questions.
antonio1475 said:
Let's go slow.
You managed to flash something via ODIN? Or it failed?
Since you rooted it (same as first guy), I guess it flashed so Odin detects the phone and is able to flash, right?
Explain the exact problem. What are you trying to flash?
Try downloading Siyah kernel for Odin, or Dream kernel for Odin to flash it and make it boot. If not, download an official firmware and try.
Anyway, reply the 2 bold questions.
Click to expand...
Click to collapse
odin detects the phone and flash it but when i start the phone i just get the triangle and galaxy s II.
because i want ics.
monkeytribute said:
odin detects the phone and flash it but when i start the phone i just get the triangle and galaxy s II.
because i want ics.
Click to expand...
Click to collapse
Ok, if it flashes, it's good.
If you have a i9100 (not a i9100G or whatever), flash this http://buildenv.dream-irc.com/android/?nav=display&file=63 via Odin and boot.
i have gt-9100
monkeytribute said:
i have gt-9100
Click to expand...
Click to collapse
Then follow my previous post
antonio1475 said:
Then follow my previous post
Click to expand...
Click to collapse
i made it but i get the icon of dreamer and that's it nothing else
monkeytribute said:
i made it but i get the icon of dreamer and that's it nothing else
Click to expand...
Click to collapse
May I ask what did you do to root before it froze?
It's weird, but at least it flashes, so you still can flash an stock firmware to get back your phone.
Maybe this one (4.0.3 so you stay away from emmc harrd-brick bug and don't blame me in case it bricked) http://www.hotfile.com/dl/161662205/363dea0/I9100UHLPS_I9100AROLP4_ARO.zip.html
Good luck
what else can i do?
By the way, now that you have Dream kernel, try booting in recovery (turn it off, then volume up + home + power hold until it gets on, then release power until you get to recovery)
HELP! After rooting, I can't access my phone
I rooted my samsung s2 i1900g and followed the steps accordingly, I tried to install the jellybean rom, I thought I had succeeded cause it said so. But when it automatically rebooted after the installation, I can't access my menu anymore, it just freezes on the Samsung Galaxy S2 and the yellow triangle with the exclamation point inside it :crying: Please help me.. Your help will be much appreciated. Thank you. God bless.
aybanjeyd said:
I rooted my samsung s2 i1900g and followed the steps accordingly, I tried to install the jellybean rom, I thought I had succeeded cause it said so. But when it automatically rebooted after the installation, I can't access my menu anymore, it just freezes on the Samsung Galaxy S2 and the yellow triangle with the exclamation point inside it :crying: Please help me.. Your help will be much appreciated. Thank you. God bless.
Click to expand...
Click to collapse
You didn't mess up with a i9100 ROM instead of i9100G ROM or kernel for rooting, did you?
When did it freeze. After rooting (you made sure it booted afterwards?) or after Jelly Bean installation?
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
Do you mean you can't even get into recovery? If it can, I would think a data wipe might get the ROM to be able to boot.
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
im new to all of this. when i hold the home button the power button and the vol down button i get a screen telling me installing a custom os could be bad press up to continue i do this and install even the official software but when it reboots it keeps looping on the samsung logo
cglegion said:
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
Click to expand...
Click to collapse
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
the donkey said:
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
Click to expand...
Click to collapse
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
cglegion said:
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
Click to expand...
Click to collapse
that sounds excellent but being new and a bit thick what is a twrp and where would i get one?
still no joy
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
the donkey said:
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
Click to expand...
Click to collapse
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
il give it a go
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
il try that just now cheers
ahhh my heed
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i downloaded the romnuke and the neatrom the instructions say... Boot into Recovery
- Install RomNuke (Does all clean & backup your android folder as well) - Thanks to Hawkerpaul
- Install ROM
- Reboot & Enjoy
but when i unzip the files i cant see any way of gettong romnuke to work i tried odin but it doesnt pick it up is there some other download i need??
still no joy
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
the donkey said:
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
Click to expand...
Click to collapse
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
still no joy
cglegion said:
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
Click to expand...
Click to collapse
ok so i went to cyanogenmod downloaded the newest file for the s2 when i did unzip i get 2 folder meta-inf and system plus a boot.img file. i burned the boot file to a disc but when i check it the disk is empty even though i can see its burned. also when i go to sammobile to get firmare it says no files available...therte must be some way of getting this to work H E L PPPPPPPPPPP
Dude, you're not supposed to be burning anything to discs. The zip file is what the recovery uses to install from. It should include the custom kernal too.
Copy the zipped ROM file to your SD card, put it in your phone and boot into recovery. Assuming you've already flashed the latest custom recovery CWM or TWRP (I prefer TWRP)
From here, to be safe, do a full wipe (That's everything except sd-card: system, data, cache, dalvik-cache)
Now you install/flash the zip file via recovery. Hopefully that completes without error. After that clear cache and dalvik-cache again just to be sure (I do this out of habit)
Reboot.
Hope this helps. I saw you mention something about "efs" and that gives me a bad feeling, read something about needing to back that up before bad things happen. But anyway, good luck :good:
im using cm12 archidroid 3.5.14 and decided to update to 3.5.15 version last night. but the update didnt went well, something went wrong and i got 'recursive' error, and it started to boot loops.
i tried so many solutions, i odin this and that and nothing worked. i downloaded cwm 6.0.0.47 i think, and managed to install the AD rom, but now im stuck at languange selection, i cant select anything because screen support isnt working
what do i do now?
Samsung S3 i9300
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Hawaiihemd said:
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Click to expand...
Click to collapse
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
I would try to flash latest AD again but with a proper up-to-date recovery
Click to expand...
Click to collapse
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
ricvai7 said:
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
Click to expand...
Click to collapse
Well then, if you already flashed stock rom via odin, your data is already gone. Make sure your phone is working on stock first now. Please be aware that the first boot after each rom flash might take up to 15 min or so because the cache has to be built at first boot!
You can find the link to TWRP recovery in my signature (see My Gadgets). I suggest your read the tutorials that are linked there also for more information.
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
ricvai7 said:
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
Click to expand...
Click to collapse
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
ricvai7 said:
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
Click to expand...
Click to collapse
i havent solved the problem with touch screen. can anybody help?