Hello every one
hope that some one cna help me with this problem
I Have this phone from Rt Project - MIG, i was trying to upload the Rom that i have with the ADB sideload, because since it is not a recognize brand it does not have any recoveries available. And the phone comes with the recovery 3e
When i put my device on the option apply update from ADB
entre de comman ADB sideload (ROMNAME)
it starts loading the rom but excatly when it gets to 68% the phone it seems to restarts a get to the recovery menu and it stops loading the rom
after that i get the message "failed to write data 'protocol fault'
Can someone help me out with that
hi, can you shared the rom, I have the same phone, but I need the rom or u can share the link or webside to download it, thanks
Related
Hello, I'm a little bit new to all this, so any help and detailed instructions are very very helpfull.
So I have Gigabyte GSmart Aku A1 device (MediaTek 6589), I don't know if it's bricked or what but apparently is not working quite well.
When I turn on my phone, it just loads and loads and loads and nothing happens (waited for about 4-5 hours), that was starting to happen after I somehow installed CWM on my device with some tutorial, CWM worked for the first time and after next reboot, it disappeared and stock recovery came back (and the problem with infinite loading screen - only showing logo).
I have ADB drivers installed, SDK aswell, tried to put stock firmware (got it from official site) and in like 1/4 of installation it says:
Code:
symlink: some symlinks failed
After that, I tried to install few versions that I downloaded from that official site, but same error again and again. (I tried to install with SD card and with ADB too. ADB is only working when I go to "apply update from ADB" in recovery. I have also used 2 different types of SD cards.)
That didn't worked either, so I got to some russian forum, and using google translator I downloaded 5-6 types of custom ROM's / Firmwares. That didn't worked either, one time when installing one of those ROM's - it said something about signature..
After that I was trying to install those ROM's with ADB and with SD Cards aswell, but turns out that every single time I get error saying: "Installation aborted.".
I have ofcourse tried to wipe data/factory and to wipe cache too, but nothing helps..
Also, when I'm in ADB console, when I type any command besides adb sideload or adb devices, I get error saying: "error: closed". I cant get into fastboot with adb console.
I really don't know what to do anymore, so any help would be very very appreciated. Thank you for your help in advance, if you need any videos, pictures or something, just tell me.
Edit: When I go to "wipe data/factory reset" in recovery, it says: "Mount /data error.".
BUMP!
BUMP^2!
luuksa said:
BUMP^2!
Click to expand...
Click to collapse
i would look for stock rom in form of full mtkdroidtools backup and preloader drivers for your mtk chipset
and flash it using flashtool (it uses preloader[you can determine if it's available/undamaged by turning phone off and opening device manager on pc and plugging phone to pc if there will be a flash in device manager before the charging starts it will flash ])
I was upgrading the current Stock rom on my ZTE Nubia Z5s Mini, I went through the recovery mode to load the new rom and got a message saying that the rom installed correctly, I rebooted the device and now its stuck at the MIUI logo or if I try to load the recovery mode I get the Nubia logo just to load back to the miui logo again. I got the rom from the MIUI site its v5.
I've left the phone for over an hour hoping it was just loading up but no change, the phone heats up and even has a charger screen when plugged in.
Anyway to get back into the recovery mode to load the original rom again or any other way of fixing this? help :crying:
I've no idea how to help you with this but I'm bumping the thread because I know how you feel.
Sent from my HUAWEI Y536A1
I'm trying to flush the rom by using adb but with an issue, even thou my device is recognized as Nubia Z5s Mini in device manager it still gives a driver error "these have been installed" and in cmd adb it does not see the device.
Update : Got drivers for install from Clockwordmod website but it will only accept the drivers if I set the phone as a modem in device manager when installing them, still not recognized by adb using CMD.
Solved driver issue and qusb_download issue, ADB drivers are done through all drives in device manager pointing to the Google USB drivers and select adb interface then run CMD from within the Google SDK program folder in platform-tools to read the device.
Now using emmc but need to generate EMMCBLD.HEX & 7x30_msimage.mbn if anyone can help, I can enter adb using recovery mode but blocked from making changes in fastboot mode, currently in download mode which can see a drive H but need the two files to proceed any further.
Hi everybody,
hope one of you can help me. cause i have no idea, what else i can do.
my problem is following:
i installed TWRP into my new ZUK Z1 to root it. than i wanted to install the CM nightlies on my phone and so i installed CWN. and than everything went wrong. first i made a backup of my system on CWN. and than i tried to install nightlies ROM and i got a error
"This package is for device: Z1; this device is jfltexx"
E: Error in /data/media/0/roms/cm-12.1-20151113-NIGHTLY-ham.zip
(Satus 7)
Installation aborted
than i thought i should restore my backup. and since than i have only a loop in the boot animation. i cant enter the COS.
even when i try to connect to my phone under windows 7 via adb i have a problem, cause even windows 7 thinks now, that my ZUK Z1 is a samsung (jfltexx is a samsung device)
so i thought i should give it a try in linux. in linux adb find my device but i cant enter fastboot to flash twrp back or the old system recovery.
what can i do now? cause i can enter CWN, i can use adb sideload but also adb push, but nothing else. is there any possiblity to install the twrp via CWN (cause i cant use fastboot).
hope you can help me, cause i need that phone soon
thx and greetings from vienna
Welcome dear xda_dev user,
Model:Prestigio Multiphone 5451 DUO
My device in the past months stuck in a boot-loop, and.. I googled for loads of threads to read,but they don't really help.
This is what the phone do, and not do:
Can/Works:
ADB sideload (PC see the device!)
Stock Recovery Menu
Can turn off/on the device,screen vibration,etc. works.
No/Not Works:
Can't listen to ADB while booting.
NO TWRP and other Recovery menus installed, only the stock android one.
NO official ROMs available from this company.
Click to expand...
Click to collapse
This is what I tried:
Tried to load 1-5Mb "firmware" updates via ADB Sideload /throwing permission problems/
Tried to Wipe data/cache /didn't boot after this/
Tried to unplug battery <- make it 0% (uncharge)
Tried to load non-company driven ROMs via ADB /permission problems/
Click to expand...
Click to collapse
NO official ROMs available from this company, I asked them to share, but they said I need to go a city (200km) away from me who have "authorized access"..
I kept this thread as simple as possible, BTW I have bought a new device, I still need this mobile because it still worth $50 I think..
Thank you if you can help, and ignore the grammar problems.
Not sure if these are legit firmware files for the duo but seeing you are in this fix it is worth a look i think
https://androidmm6.com/deviceinfo_1701.html
http://www.needrom.com/download/prestigio-pap-5451-duo/
Probably Scam/fake.
The file (rar) is locked via password and it's nowhere published, and it's only 1.65Mb so not really a ROM.
Anyways, I star you up for first and probably last replyer.
If you are able to sideload , then i think you can recover your phone in no time.
First I need you need to know that this procedure is complicated but You can recover your device.
go to mtkroms.com and Download any rom from there as per your wish.
-Remove boot.img from zip file and save it else where
-Sideload the rom
-After sideloading ,reboot device into fastboot by pressing power and both volume keys together until Boot Menu appears where you have the choice to Normal Boot , Boot into Fastboot(Bootloader) and Boot into recovery.
-Use Volume Down to navigate to Fastboot and press Volume Up (or Power button in some devices)
-After booting into fastboot , extract boot.img from .zip file to C:
-type in , fastboot flash boot "C:\boot.img"
-type fastboot reboot
If you are lucky , your device might boot (very slight chance to actually boot)
If it doesnt , no issues , this is where you show your skills as rom porter xD
You wont have access to Android OS , but after dalvik cache has been build , access to adb will be granted.
In the same above mentioned website , there is a tool which can port cwm for any mediatek device.
Download it in your PC , PC should not be windows 10 , Compatibility mode wont work.
Make sure you have Drivers necessary to proceed.
Use the tool and Click automatic porting and follow on screen option to Complete Porting recovery , once the recovery has been ported , reboot into recovery.
Now you will have complete access to adb without any problem.
Once you have a proper working recovery , with adb shell , do the following,
Code:
-adb shell
-df
-cat /proc/partitions
Once you have access to the mount points , you can start DeCompiling kernel and do the necessary changes in fstab
To decompile kernel , there are many tools for Windows and Linux
Google it , if you have any problem , PM me or reply back , I'll be happy to assist you
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?