As the heading says, I need help installing lollipop using TWRP, sideloading the .zip fails every time. Any suggestions, it would be nice to install this update as it doesn't seem to be coming as an OTA any time soon for me. Thanks.
Well, the OTA came in this morning and saved the day. I reflashed stock recovery just in case, so it wouldn't brick like my G3 did when I tried to install an OTA. I then rebooted after flahing stock and installed the update. All is well.
rjzmanz said:
Well, the OTA came in this morning and saved the day. I reflashed stock recovery just in case, so it wouldn't brick like my G3 did when I tried to install an OTA. I then rebooted after flahing stock and installed the update. All is well.
Click to expand...
Click to collapse
Glad you got it working, it would seem that you need stock recovery to flash the OTA as the TWRP recovery causes the ZIP's version check asserts to fail. So you wouldn't have bricked, it just wouldn't have installed for you.
When I restore a backup of rls 19 hyperdrive that i made on an older (2.6.x.x) version of TWRP the completion percentage goes OVER 100% then i get bootlooped at the samsung screen, any help? Had to upgrade my TWRP version so I can run lollipop.
Drake9897 said:
When I restore a backup of rls 19 hyperdrive that i made on an older (2.6.x.x) version of TWRP the completion percentage goes OVER 100% then i get bootlooped at the samsung screen, any help? Had to upgrade my TWRP version so I can run lollipop.
Click to expand...
Click to collapse
Bump, would really like some help :/
Back to stock
Drake9897 said:
Bump, would really like some help :/
Click to expand...
Click to collapse
You can follow this guide to Odin back to stock MDK: http://forum.xda-developers.com/showthread.php?t=2301259. Should fix your issue. Once you're there, flash TWRP. Once you've flashed TWRP, flash the ROM that you want. I'm running danvdh's GPE lollipop ROM and TWRP 2.8.4.0 with no issues. The latest version is 2.8.5.0, but I can't get that version to boot for some reason.
I'll try that! Thanks! (sorry for late reply)
just flashed stock and got twrp back, tried to flash my RLS 19 backup and it completes at 3gb out of 1.2gb and 170% out of 100%. ugh :/ also twrp won't install via goo manager, have to use twrp manager .
TheSt33v said:
You can follow this guide to Odin back to stock MDK: http://forum.xda-developers.com/showthread.php?t=2301259. Should fix your issue. Once you're there, flash TWRP. Once you've flashed TWRP, flash the ROM that you want. I'm running danvdh's GPE lollipop ROM and TWRP 2.8.4.0 with no issues. The latest version is 2.8.5.0, but I can't get that version to boot for some reason.
Click to expand...
Click to collapse
z
Also I'm running danvdh's lollipop GPE as well. It's actually the reason i updated twrp and started to get this issue. i'm running the same version of twrp as you and still no hyperdrive backup can restore. ):
I download the system update for OnePlus x oxygen os 2.2.1. But when I reboot it for installation, there's a message "installation failed". What's wrong with the file? It seems to download everything properly. But error occurs during installation.
Is it rooted? Which recovery r u using? Twrp or stock?
Not rooted
itsmelutfor said:
Is it rooted? Which recovery r u using? Twrp or stock?
Click to expand...
Click to collapse
What have you already modded in the original installation? If your system was stock the update wouldn't fail. Please be more specific so people can help you. If you've kingrooted or flashed twrp, the update will fail...
I don't know about the OP, but I had the same issue when I tried to OTA to OOS 2.2.1. I applied all my hacks through TWRP but always booting TWRP by ADB and never flashing TWRP to the phone. So, I have unlocked bootloader, Developer settings, stock recovery, Boeffla, CameraHAL. With this, OOS 2.2.1 OTA gave me "installation failed". Shouldn't it have worked since I was still in stock recovery?
Thinking it could be the kernel I then tried to restore the original kernel by going to a TWRP backup I made immediately before flashing Boeffla, and restoring boot.img. To my surprise, I then lost all Wi-Fi functionality.
In the end, I downloaded the full OOS 2.2.1 ROM from OnePlus and dirty-flashed it, stacking it before the newest versions of Boeffla and CameraHAL. Phone is working OK, no bugs noticed so far.
I still haven't flashed TWRP nor rooted the phone. In my configuration, what's stopping OTA from working? It would be nice to have OOS3 OTA, since I still don't trust the backups I'm making.
Sent from my ONE E1003 using XDA Labs
TiagoJSilva said:
I don't know about the OP, but I had the same issue when I tried to OTA to OOS 2.2.1. I applied all my hacks through TWRP but always booting TWRP by ADB and never flashing TWRP to the phone. So, I have unlocked bootloader, Developer settings, stock recovery, Boeffla, CameraHAL. With this, OOS 2.2.1 OTA gave me "installation failed". Shouldn't it have worked since I was still in stock recovery?
Thinking it could be the kernel I then tried to restore the original kernel by going to a TWRP backup I made immediately before flashing Boeffla, and restoring boot.img. To my surprise, I then lost all Wi-Fi functionality.
In the end, I downloaded the full OOS 2.2.1 ROM from OnePlus and dirty-flashed it, stacking it before the newest versions of Boeffla and CameraHAL. Phone is working OK, no bugs noticed so far.
I still haven't flashed TWRP nor rooted the phone. In my configuration, what's stopping OTA from working? It would be nice to have OOS3 OTA, since I still don't trust the backups I'm making.
Sent from my ONE E1003 using XDA Labs
Click to expand...
Click to collapse
If you modify even a single bit in stock rom and revert back, updates are definitely going to fail.
The only solution to receive OTAs is flashing stock recovery with stock rom with locked bootloader.
Or you can manually flash OTAs using TWRP.
I made several backups of my stock rom before testing mods, but when I restored and tried to perform OTAs, it always failed while installing.
prabhat.singh.836 said:
If you modify even a single bit in stock rom and revert back, updates are definitely going to fail.
The only solution to receive OTAs is flashing stock recovery with stock rom with locked bootloader.
Or you can manually flash OTAs using TWRP.
I made several backups of my stock rom before testing mods, but when I restored and tried to perform OTAs, it always failed while installing.
Click to expand...
Click to collapse
You just need to wipe cache from the stock recovery in order to install the ota updates , customer care babe told me
---------- Post added at 03:44 AM ---------- Previous post was at 03:43 AM ----------
Hello guys, I unlocked my bootloader...now would I get the ota updates? It's not rooted and on stock ROM.
If no then please tell me how to revert back to locked bootloader.
TiagoJSilva said:
I don't know about the OP, but I had the same issue when I tried to OTA to OOS 2.2.1. I applied all my hacks through TWRP but always booting TWRP by ADB and never flashing TWRP to the phone. So, I have unlocked bootloader, Developer settings, stock recovery, Boeffla, CameraHAL. With this, OOS 2.2.1 OTA gave me "installation failed". Shouldn't it have worked since I was still in stock recovery?
Thinking it could be the kernel I then tried to restore the original kernel by going to a TWRP backup I made immediately before flashing Boeffla, and restoring boot.img. To my surprise, I then lost all Wi-Fi functionality.
In the end, I downloaded the full OOS 2.2.1 ROM from OnePlus and dirty-flashed it, stacking it before the newest versions of Boeffla and CameraHAL. Phone is working OK, no bugs noticed so far.
I still haven't flashed TWRP nor rooted the phone. In my configuration, what's stopping OTA from working? It would be nice to have OOS3 OTA, since I still don't trust the backups I'm making.
Sent from my ONE E1003 using XDA Labs
Click to expand...
Click to collapse
swatidixit710 said:
I download the system update for OnePlus x oxygen os 2.2.1. But when I reboot it for installation, there's a message "installation failed". What's wrong with the file? It seems to download everything properly. But error occurs during installation.
Click to expand...
Click to collapse
deathaddder said:
You just need to wipe cache from the stock recovery in order to install the ota updates , customer care babe told me
---------- Post added at 03:44 AM ---------- Previous post was at 03:43 AM ----------
Hello guys, I unlocked my bootloader...now would I get the ota updates? It's not rooted and on stock ROM.
If no then please tell me how to revert back to locked bootloader.
Click to expand...
Click to collapse
I have tried wipe cache method and doesn't works at all if you have rooted your phone and unrooted back.
And the OTA should work even with unlocked bootloader, if you have not rooted your phone before.
If you want to lock your bootloader again, just follow these steps,
1. Goto Settings -> Developer options
2. OEM unlocking -> turn it off
Error in installation of OxygenOS2.2.1
Having same issue, I doubt why it is not getting installed. Not rooted and not even touchted the kernel. Is it a bug or it requires a flash ?
Ankit_Lal said:
Having same issue, I doubt why it is not getting installed. Not rooted and not even touchted the kernel. Is it a bug or it requires a flash ?
Click to expand...
Click to collapse
Did you try to flash the full rom zip here?
http://downloads.oneplus.net/2016-04-20/opx/OnePlus_X_OxygenOS_2.2.1-X/
Cannot update to Oxygen OS 2.2.1
Yup ! I tried the same but it fails repetedly
Is there anyone who is facing the same issue ?
Ankit_Lal said:
Yup ! I tried the same but it fails repetedly
Is there anyone who is facing the same issue ?
Click to expand...
Click to collapse
I have the same problem. Brand new phone, out of box, Oxygen version 2.1.0.
Hi,
I've previously rooted my tablet and recently unrooted and factory reset. I was excited to see that Sony are finally pushing out a Marshmallow update and tried to do the update, but when the tablet resets during the update installation it keeps just going to TWRP recovery page.
So - I have a feeling the tablet wants to get to its stock recovery as part of the install, but I don't know how to revert from TWRP back to whatever the Xperia z2 tablet stock recovery is... I guess I don't have any idea whether that's even the problem.
Any help would be greatly appreciated!
Thanks.
You would have to flash a stock FTF with flash tool. Easier solution though, download one of the pre rooted MM ROMs from the General section and just flash it with TWRP. Then you can have rooted MM.
Sent from my Nexus 6P using XDA-Developers mobile app
Hi, I am trying to install cynogenmod or mokee rom and the device always gets stuck at cyno/mokee logo. it never goes beyond that. tried to wait for half an hour(waited for one hour twice).
Here is what I am doing:
I used TWRP but it wasnt working so i installed CWM, in both the recoveries I was wiping everything except sd card storage as my zip files were in the card. after that i flashed zip files(ROM & GAPPS). after that i rebooted to system. Am I doing it wrong? I am currently on 4.4.4 stock rom. Need help.
Thank you.
No one to help?
How can TWRP not work on your device? Install again TWRP via adb.
Flash latest twrp 3.0.2 and try
rian_tama said:
How can TWRP not work on your device? Install again TWRP via adb.
Click to expand...
Click to collapse
Rajendran Rasa said:
Flash latest twrp 3.0.2 and try
Click to expand...
Click to collapse
The problem wasn't with the recovery and I wasn't doing anything wrong. It was really too bad to know that the rom version I was installing had a bootloop bug in it. So I had tried two previous versions but they too had the same bug. And unfortunately I tried CONTINUOUSLY for two long days to install those same bugged ROMS as if God has put me in frustration mode. Tech fooled me right, lol.
Grab the November 8 version of Cyanogemod. There are issues with the newer updates.