{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B]Disclaimer : [/B]
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Tested this Kernel several hours playing Asphalt 8, Modern Combat 5 and 4 . Tremendous Increase in FPS (Frame Rate /sec) and no heating issue in the phone after continuous 30mins of Gaming. Probably the Best Kernel Yet for Grand 2
Special Fixes,Whats New from Other Kernels
Fixed Heating Issue ( With Any ROM )
Fixed Screen Blink Issue
No wifi Bug on any ROM
No extra Battery Drain (Deep Sleep When on Idle)
Added Swapiness NEW
Added KSM ( Kernel Samepage Merging ) NEW
Added Virtual Memory Tweaking NEW
Now Supporting BOB1 ( Latest Build ) NEW
Preety Cool Features Isnt it ??
No Stupid CPU Governors for Confusing Users, Kept it Simple !!
Governors:
OnDemand
Interactive
Conservative
User Space
PowerSave
Performance ( Recomended For Gaming )
NOTE : Kernel is only for TouchWiz Roms, Read and Flash Correct Version only, Dont Blame me after you flash wrong version. :fingers-crossed:
Flashing Procedure :
Download Busybox.zip and Kernel.zip according to your Version
Place them in the Ext-SDCARD
Boot to Recovery (Philz Touch Recomended)
Flash Blackbird_Busybox.zip,then
Flash Blackbird_kernel XX.zip
Reboot An Enjoy :laugh:
Application Kernel-Auditor is not a Part of my Work and Special thanks for Making Such a App.
You Can Now Choose Governors from CPU section and do many more tweaks as you need. (Find Best Settings For you )
Flash Kernel and BusyBOX ver1.0 or ver.1.5 for NK1 all Kitkat ROMS only)
Kernel for BOB1Support Added
Find Download Links in 3rd POST
Do some research Before panicing or Spaming the POST.
Official Q and A Section on Facebook : CLICK HERE
KINDLY HIT THE THANKS BUTTON IF YOU MEAN IT
Contributors
anuragdc, paul_akash (For Uploading Source Code)
Kernel Special Features: Compiled with latest Tool-chain and Highly Optimized for Touchwiz ROMS
Version Information
Status: Stable
Current Stable Version: v1.5
Stable Release Date: 2015-05-26
Created 2015-05-27
Last Updated 2015-05-26
ChangeLOG :
26.5.2015 - ver 1.0 ( First Stable Release ) Depreciated (Replaced with Rev A )
26.5.2015 - ver 1.0 Rev A NEW
All Features of V1.0
Added support for BOB1 (Latest Build for Grand 2)
26.5.2015 - ver 1.5 Depreciated (Replaced with Rev A )
Added Swapiness
Added KSM ( Kernel Samepage Merging )
Added Virtual Memory Tweaking
More Better FPS on Games and More Optimized then Before
26.5.2015 - ver 1.5 Rev A NEW
All Features of V1.5
Added support for BOB1 (Latest Build for Grand 2)
Download Section :
As you know i m working day and night to bring you all Good Kernels and ROMS , To support my work Please Consider making DONATIONS.
If you want to Donate me please p.m me
Download LINK For BlackBird
On cm12. Any plans to make one for lp?
Most people are using blisspop our cm12.
And thanx for making the kernel nonetheless.
mobihack said:
On cm12. Any plans to make one for lp?
Most people are using blisspop our cm12.
And thanx for making the kernel nonetheless.
Click to expand...
Click to collapse
Sorry Bro Not supporting Cyanogenmod or Other Sources at this moment. But i have future plans for it.
Where is your source code link ??
aapav01 said:
Where is your source code link ??
Click to expand...
Click to collapse
I didn't git it yet..my net connection is not that fast to upload few GB of Data.
Nice to hear that.
Will you be adding features like d2w,s2w,otg etc ?
You came in the right time. Grand 2 needs a good kernel
mobihack said:
Nice to hear that.
Will you be adding features like d2w,s2w,otg etc ?
You came in the right time. Grand 2 needs a good kernel
Click to expand...
Click to collapse
Thnx , Yes looking forward to give grand 2 a good kernel suitable as a daily driver.I have plans to add swapiness in near future
For further discussion and plans stay tuned at the FB page mentioned in the Original post
anuragdc said:
Thnx , Yes looking forward to give grand 2 a good kernel suitable as a daily driver.I have plans to add swapiness in near future
For further discussion and plans stay tuned at the FB page mentioned in the Original post
Click to expand...
Click to collapse
Nice. TW users will benefit much from the swapiness
Will you please look at otg support bro? And create experimental builds featuring New features.
For people who don't know swapiness: http://en.m.wikipedia.org/wiki/Swappiness
@anuragdc
That's what we all expect from you!
Keep the good work up!
can you implement swipe2unlock or double tap2unlock and BLN feature as we dont have LED notification in our phone.
Can i flash the kernel without flash the busybox??
gung raja said:
Can i flash the kernel without flash the busybox??
Click to expand...
Click to collapse
But in order to change the CPU scaling or Governor or tweak the Kernel Busybox is Mandatory So you have to flash the busybox
WaseemAlkurdi said:
@anuragdc
That's what we all expect from you!
Keep the good work up!
Click to expand...
Click to collapse
Thnx For the Appreciation.. i will be specially supporting Galaxy Grand 2 in the Kernel Section.
IF YOU LIKE MY WORK PLEASE HIT THE THANKS BUTTON
manan001 said:
can you implement swipe2unlock or double tap2unlock and BLN feature as we dont have LED notification in our phone.
Click to expand...
Click to collapse
Yes Of course i have plans for adding features, But as you understand i have to keep stability and new features parallel . Mainly now working to Increase and optimize more for Speed.
IF YOU LIKE MY WORK HIT THANKS BUTTON
And i think now its time to make some changes in your signature...I hope u understand what i mean
anuragdc said:
Yes Of course i have plans for adding features, But as you understand i have to keep stability and new features parallel . Mainly now working to Increase and optimize more for Speed.
IF YOU LIKE MY WORK HIT THANKS BUTTON
And i think now its time to make some changes in your signature...I hope u understand what i mean
Click to expand...
Click to collapse
Ya sure soon will change my signature.
I have few suggestions for you:-
Please dont include any free app in your kernel build as its creating update problem from playstore. its not allowing to get the app updated and getting 492 error. it would be better you recommend in you thread and keep it optional.
You will get the source of BLN and Swipe2Wake or Tap 2 Wake as u can find source in DEDS kernel which is available in same thread and its open for all to do development. . please find below thread will help you out.
http://forum.xda-developers.com/galaxy-grand-2/orig-development/kernel-deds-v2-0-t2826715
Can we use latest busybox binary?
manan001 said:
Can we use latest busybox binary?
Click to expand...
Click to collapse
manan001 said:
Ya sure soon will change my signature.
I have few suggestions for you:-
Please dont include any free app in your kernel build as its creating update problem from playstore. its not allowing to get the app updated and getting 492 error. it would be better you recommend in you thread and keep it optional.
You will get the source of BLN and Swipe2Wake or Tap 2 Wake as u can find source in DEDS kernel which is available in same thread and its open for all to do development. . please find below thread will help you out.
http://forum.xda-developers.com/galaxy-grand-2/orig-development/kernel-deds-v2-0-t2826715
Click to expand...
Click to collapse
I will surely try to add those features, and you can use latest Busybox Binary ..
Is it safe if I use it in stock rom (Build no. G7102XWUBNK1 Baseband: G7102DXUBNH1 Kernel Ver. 3.4.0) ??
Because in official kitkat stock rom gaming is slowmo. Im playing FIFA15.
Currently im in S6 styled S5 port. Is it also safe to use this kernel?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Welcome to CM11s Revision 2! This all new revised edition of the ROM aims to bring you quality experiences that you find on the original OnePlusOne device over to the Xperia SP! This ROM has been revised and has went through rigourous internal code tweaks that will bring you an experience you'll never forget! Well, maybe you will. But no-matter! Enjoy the ROM and do give your thoughts and opinions about the ROM! This ROM is built around MrSteve's, CyanogenMod's and other Sources and some features may appear on the ROM as this is a combined build.
Click to expand...
Click to collapse
Requirements
If you choose to join the CyanogenMod Community, then you shall beware of any type of warranty void that may occur! Included with that awareness campaign, you might need to also understand that any part of this software is distributed as is and I will not be responsible if any part of this ROM affects your daily activites. Also in the requirements list are the following:
An Xperia SP (Huashan) [C5302,C5303, C5306]
Any Compatible Recovery
Locked or Unlocked Bootloader
A WORKING AND A NON-LAZY BRAIN
If you meet the needed requirements, then please go ahead and install the ROM for your device! If you do not know how to flash a custom ROM such as this one on your device, follow the steps shown below:
Download the Custom ROM to your device
Root your device (Guides to do this are available throughout the Sony Xperia SP XDA Forums)
Install the compatible recoveries for your device (Guides to do this are available throughout the Sony Xperia SP XDA Forums)
Reboot into the device recovery
Format your device by Factory Reset
Format your Cache
Format your Dalvik Cache (Found in the Advanced Menu)
Navigate to the Recovery Installer menu and select the ROM Zip you will like to install onto your device
After Installation is Complete, Flash GAPPS (Google Apps) If required
Reboot your device once everything is complete and enjoy your new ROM!
Click to expand...
Click to collapse
Builds/Downloads
Builds that are released here can be considered as still in the stable branches. If you wish to join the Testing Team, please contact me via Private Messaging on XDA (in a polite manner). Do also note that I don't have my Xperia SP anymore. YES! I HAVE NOT TOLD YOU THIS LONG! and I use an Xperia Z3 since last week. BUT I still develop for you awesome XSP users and it may also be the reason why I can't always test this builds! (Check my SIG for more info on why I don't have my XSP anymore ) :silly:
~===================================~R2_Build20
Change-log:
Code:
[LIST=1]
[*]Fixed TouchScreen Issues
[*]Improved Video Playback
[*]Added Multiple new Governers in accordance to MrSteve's Builds
[*]Added Locked-Bootloader Support in Accordance to Locked Bootloader Installation Methods by Bagyusz
[*]Improved Battery Life by reducing background proccesses
[*]Added tiny improvements implemented through Google Source (4.4.4 & 5.0)
[*]Added small Security Improvements in accordance to Android 5.0
[*]Removed Unnecesary Proccesses from running
[*]Tweaked Kernel to improve overall performance
[*]Included updated front-end and back-end applications in accordance to latest CM11s sources (44s and above)
[*]Includes optimizations and tweaks from Revision 1 builds (The original CM11s)
[*]*Experimental-Allow ART to run when specified without less possibility of any errors
[/LIST]
PLEASE CHECK FOR FILE INTEGRITY BY CHECKING THE FILE SIZE (287MB-301.536MB) AND OPENING IT UP TO ENSURE WINRAR (Or any Zip opener you prefer) DOES NOT WARN YOU ABOUT THE ZIP's INTEGRITY!
Download here: https://s.basketbuild.com/devs/furrydaus/CM11s -Brought to you by our friends over at BasketBuild!
~===================================~
Click to expand...
Click to collapse
ROM Compatibility
The ROM itself has been packaged to provide the best experience possible but if you wish to customize it even further, then do check this compatibility list to see if certain mods and kernels don't work with the ROM.
Incompatible List:
William's Kernel v4.1 (BootLoop)
Click to expand...
Click to collapse
Contributors/Credits
It is also important to provide credits and appreciation to those who may have possibly helped with this project. Thank you contributors! If you felt that your name should be up here, please do send me a PM and i'll gladly add it on to this section!
@Levered
MrSteve555
CyanogenMod
CyanogenMod Maintaners
Bagyusz
Nexus_Prime
DooMLorD
Pec0ra
Ravendra
BasketBuild Developers
and possibly more!
Click to expand...
Click to collapse
Donate
"Sharing is caring!"- Care bears.... (yeah okay that might have seemed weird on your end....)
If you have the money and want to aid me in development, you can PM me on XDA and i'll send you an invoice with the amount you want to pay :laugh:
-If you want to set up a fund-raiser, then by all means do so. But please keep it to a single thread and a single person to handle it. I don't want to be the one starting this kinda things and I most definitely do not want users to take advantage of other people (who want to help) just to get money for yourself. If you do want to donate to me for helping me get another XSP, then send me a PM specifying where the money should go! :victory:
Click to expand...
Click to collapse
Brought to you by:
Leave a #halo5 if you love Halo 5: Guardians Multiplayer Beta!
XDA:DevDB Information
CyanogenMod11s ► R2 [UNIVERSAL], ROM for the Sony Xperia SP
Contributors
Furrydaus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: An Xperia SP and a Hard-working brain
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: R2_Build20
Stable Release Date: 2014-12-12
Created 2014-12-12
Last Updated 2014-12-12
And that sounds incredible Screenshots would be nice though
It has been a week or so without any new ROMs so its time to check this out Thanks @Furrydaus
Vinay_FXG said:
And that sounds incredible Screenshots would be nice though
It has been a week or so without any new ROMs so its time to check this out Thanks @Furrydaus
Click to expand...
Click to collapse
Take a good look at the text at the BUILDS section and you'll understand why I do not have screenshots. :crying:
and anyways, it'll probably look the same as other CM11s ROMs
With universal you mean it is for LBL and UBL? Why? XDDD
TheWolfer22 said:
With universal you mean it is for LBL and UBL? Why? XDDD
Click to expand...
Click to collapse
To make it seem cool and to try and make it a standard across all ROMs that support UBL and LBL devices. Just trying to change the way we look at ROM compatibility rather than having newbies spewing "IS THIS FOR LBL? " or "WHY DOES THE THREAD NOT HAVE ANY SAYING OF LBL? IS THERE LBL????".
I think it's a good idea. I try when I have time. Well I really liked that you did versions separately.
TheWolfer22 said:
I think it's a good idea. I try when I have time. Well I really liked that you did versions separately.
Click to expand...
Click to collapse
What exactly do you mean by keeping versions seperate? This version is the updated one and the old thread has been forsaken by me lol
Great job bro !! Any bugs ???
furrydaus said:
what exactly do you mean by keeping versions seperate? This version is the updated one and the old thread has been forsaken by me lol
Click to expand...
Click to collapse
can i use williams kernel in this rom ?
svvnirmal said:
can i use williams kernel in this rom ?
Click to expand...
Click to collapse
Ive done a couple of kernel and android tweaks that may affect booting BUT you could always try it out yourself at your own risk. Tell us the results (if you do) so i can post it up on the OP.
Thank u bro
Furrydaus said:
Ive done a couple of kernel and android tweaks that may affect booting BUT you could always try it out yourself at your own risk. Tell us the results (if you do) so i can post it up on the OP.
Click to expand...
Click to collapse
K bro i will try and test the rom with latest william kernel....Still 10 minutes to finish download of the rom.
If it is like mrsteve555 rom u must install williams kernel based on stock
@Furrydaus
Amazing piece of work bro. The rom is blazingly fast and smooth, no hiccups whatsoever. It just cant get any better. The only thing that is annoying me is that the status bar and navbar dont disappear when in lockscreen....they just stay there... Is there any way i can get back the fullscreen lock?
Other then that nothing to complain about
And a big bigg thanxx and keep up this great work
TheWolfer22 said:
If it is like mrsteve555 rom u must install williams kernel based on stock
Click to expand...
Click to collapse
The rom is actually very mixed up in terms of its base. Its a mix of cm, mrsteve, aosp and a couple of other different sources so it might be difficult to determine. You guys could try but im not going to be responsible for any device failures.
If you have any news of whichever kernels work, then do inform us on this thread!
kaushal9119 said:
@Furrydaus
Amazing piece of work bro. The rom is blazingly fast and smooth, no hiccups whatsoever. It just cant get any better. The only thing that is annoying me is that the status bar and navbar dont disappear when in lockscreen....they just stay there... Is there any way i can get back the fullscreen lock?
Other then that nothing to complain about
And a big bigg thanxx and keep up this great work
Click to expand...
Click to collapse
Ill see if i can force immersive mode on that app in a future delta (ota) update. I just need more stuff to fix and add before pushing an ota update. I dont want too many of them cluttering the op
Furrydaus said:
The rom is actually very mixed up in terms of its base. Its a mix of cm, mrsteve, aosp and a couple of other different sources so it might be difficult to determine. You guys could try but im not going to be responsible for any device failures.
If you have any news of whichever kernels work, then do inform us on this thread!
Click to expand...
Click to collapse
If the ROM works with locked bootloader, it works with the stock kernel. If it works with the stock kernel, then it will work with Sony stock version of Williams kernel
Hi! Great job, I have just one question, can I flash this over Steve's CM11?
with 2 applications Photo Gallery
The ROM is great, but I noticed that it came with 2 applications Photo Gallery. It would be a BUG?
I used his previous Revolution 8, so I updated to the new!
Sorry my english ...
The best rom for SP!!! Ever 300mb RAM free(i have 40 app installed)
I tried to install william's kernel v4.1, but bootloop.
pireyy said:
Hi! Great job, I have just one question, can I flash this over Steve's CM11?
Click to expand...
Click to collapse
Yes you can but i propably will do a full wipe.
Joaojt said:
The ROM is great, but I noticed that it came with 2 applications Photo Gallery. It would be a BUG?
I used his previous Revolution 8, so I updated to the new!
Sorry my english ...
Click to expand...
Click to collapse
Yes it is. Apparently i forgot to remove the old version of the cm11s album app. ><
Furrydaus said:
Yes it is. Apparently i forgot to remove the old version of the cm11s album app. ><
Click to expand...
Click to collapse
Ok, I'll wait then you compile a new version with fixed this, meanwhile, will using the previous "Revolution 8".
Other than that it's show!
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 2/2 prime. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 2/2 prime user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CHANGE LOG:
God's Kernel-R1
Build with UBERTC 4.9 Thanx to @Cl3Kener
Alucard Hotplug
Custom thermal
KCAL with the latest update
Fsync Disable
CPU OC to 1.4Ghz
Selinux Permanently Permissive
exFAT support
NFTS RW support
NEON optimized.
power efficient workqueue
General Optimization & Tweaks
God's Kernel-R2
Sound bugs from R1 fixed
and a little boost to audio thanx to @[email protected]
God's Kernel-R3
updated the kernel to the latest caf tag for msm8916
added zzmove and darkness governors
msm aderno idler
misc fixes and patches
God's Kernel-R4
updated the kernel to the latest caf tag for msm8916
huge clean up in kernel
USB fast charge
Faux sound
revert back to old thermal module
a few new governors
vibrator sysfs
LMK tunings
much more :cyclops:
DOWNLOAD LINKS:
GK_HM20148xx_25032016_0208.zip - 5.77 MB
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Flash provide Kernel Zip
Wipe Cache and Dalvik
Reboot To System
THIS KERNEL IS ONLY FOR CM BASED ROMS DO NOT FLASH IT ON KK OR MIUI YOU WILL BRICK YOUR DEVICE
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
A Huge thanx for @[email protected] for being with me n testing for me each n every build this would not be possible without him
XDA:DevDB Information
[KERNEL][LP/MM][CM based] God's Kernel R4, Kernel for the Xiaomi Redmi 2
Contributors
Tarun93
Source Code: https://github.com/tarunkapadia93/android_kernel_cyanogen_msm8916/tree/gk-r4
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2016-03-25
Created 2016-01-17
Last Updated 2016-03-24
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Flashed on redmi 2 prime ... Smooth and lag free.
Also increased the performance. All working fine. :good:
flashed the new build and once again lag free
superb performance
i have redmi 2 prime 64bit (2014818)....
will this kernel work on this...???
saurabh1234 said:
i have redmi 2 prime 64bit (2014818)....
will this kernel work on this...???
Click to expand...
Click to collapse
only for CM based roms n yes it will work with both redmi 2 and 2 prime just make sure you have a LP rom based of CM
Tarun93 said:
only for CM based roms n yes it will work with both redmi 2 and 2 prime just make sure you have a LP rom based of CM
Click to expand...
Click to collapse
then why wrote in heading that it is for 32-bit...???
Nice bro but I have some questions:
1. Actually, what you mean with "32bit"?
Resuming, will this work on
ro.product.model=2014811
ro.product.brand=Xiaomi
ro.product.name=2014811
ro.product.device=HM2014811
ro.product.mod_device=wt88047_global?
Well, I ain't falling out of performance so... what can you say about battery and overheating in this kernel?
Well, awesome works bro bringing us this development
Keep earning your keep
saurabh1234 said:
then why wrote in heading that it is for 32-bit...???
Click to expand...
Click to collapse
He just mentioned to described that this kernel is for 32bit lollipop ROMs for our device
>There is no 64bit roms for our device until now.
>So he have made it clear for us that this is 32bit (We may be doubted whether this kernel is 32bit or 64bit, since it is for lollipop. So he made it clear before having questioned..)
>Simple.. :silly:
Thanks for this awesome kernel anyways, Tarun bro :good: :good: :good:
---------- Post added at 04:40 PM ---------- Previous post was at 04:32 PM ----------
saurabh1234 said:
then why wrote in heading that it is for 32-bit...???
Click to expand...
Click to collapse
saurabh1234 said:
i have redmi 2 prime 64bit (2014818)....
will this kernel work on this...???
Click to expand...
Click to collapse
Not only your redmi 2 prime... Every redmi 2 & redmi 2 prime is a 64bit device only..
64bit capable devices can run 32bit ROMs & apps
but 32bit devices/ROMs are compatible with 32bit kernels & apps only..
So he have mentioned that this kernel is 32bit..
Thanks :good:
@Tarun93 , can you check my pull request? Since you are compiling using UBER, I have some flags that I added that may increase performance.
nick37332001 said:
@Tarun93 , can you check my pull request? Since you are compiling using UBER, I have some flags that I added that may increase performance.
Click to expand...
Click to collapse
just saw it bro will test them soon thanx
BTW R2 released n has all the things fixed which users faced in R1
Tarun93 said:
just saw it bro will test them soon thanx
BTW R2 released n has all the things fixed which users faced in R1
Click to expand...
Click to collapse
I just compiled a version that seems to work on my device.
http://d-h.st/hZPU
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
nick37332001 said:
I just compiled a version that seems to work on my device.
http://d-h.st/hZPU
Click to expand...
Click to collapse
BTW, device will be cooler if all cores run at the same time.
@Tarun93 would be great to see a few wakemods! Great work though! commendable job!
thanks bro... now my all confusion is over... and good to see new kernel...
http://pastebin.com/jpSSv2aq
This error... something to worry about?
Tarun, what's with the test gk? Tried building but it does not boot.
Sent from my 2014817 using Tapatalk
[email protected] said:
Flashed on redmi 2 prime ... Smooth and lag free.
Also increased the performance. All working fine. :good:
flashed the new build and once again lag free
superb performance
Click to expand...
Click to collapse
Can you please confirm whether the Magnetic sensor is working, please upload a screenshot from the CPU-Z app
nick37332001 said:
Tarun, what's with the test gk? Tried building but it does not boot.
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
gk-test is the branch i used for Gk-R2 its based of kumajaya's kernel
also i needed you to tell me a list of bugs in zwliew's and kumajaya's kernel n if there is anyother i need to make things more universal for all the roms i cant make 10 kernel zips each for diff kernel base :crying:
Tarun93 said:
gk-test is the branch i used for Gk-R2 its based of kumajaya's kernel
also i needed you to tell me a list of bugs in zwliew's and kumajaya's kernel n if there is anyother i need to make things more universal for all the roms i cant make 10 kernel zips each for diff kernel base :crying:
Click to expand...
Click to collapse
zwliew source bugs:
- barely working proximity sensor
- black screen & freeze due to some mmc (fixed in kumajaya's source)
- CPU stuck at some value for first five minutes
- painful screeching sound first five seconds of .wav recording
kumajaya source bugs:
- painful screeching sound first five seconds of .wav recording
- worse camera quality and I suspect something to do with autofocus
Mostly, I think both kernels are build on the same base but with different commits and device names.
cm-12.1-amss-2.1
However, kumajaya's rom is compatible with zwliew's kernel base but zwliew's rom is not compatible with kumajaya's kernel base
Redmi 2 hm2014813
Hello, I am using Cm12 on my redmi 2 and would like to flash your kernel, specially in order to get rid of that awful voice recording sound.
Though I am not able to flash it.. Recovery says that my device is not compatible.. It should be REDMI 2 HM2014811 but mine is HM2014813.
Any idea what I should do please.
Thank you!
Be careful
MarcusAlemao said:
Hello, I am using Cm12 on my redmi 2 and would like to flash your kernel, specially in order to get rid of that awful voice recording sound.
Though I am not able to flash it.. Recovery says that my device is not compatible.. It should be REDMI 2 HM2014811 but mine is HM2014813.
Any idea what I should do please.
Thank you!
Click to expand...
Click to collapse
First, you need t know if it's compatible with ....... 13
If it is, should flash uh?
But it not flashed so here goes the geek part I guess...
WARNING this may cause bootloop or soft brick
Be sure you know how to get a way from this
Make a copy of the kernel's zip and open that copy with winrar without extracting
Go to META-INF/com/google/android/updater-script and open this with a text editor like notepad++ (if you dont have np++) I should sugest you dont try any other one
Find the assert comand right on begining I guess.... find the getprop ro.product.xxxxx blabla and change to yours
Close and save. Winrar will update and get courage to flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!DISCLAIMER!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
----NOTICE----
ATM this kernel is only compatible with motion rom v17.0,5.x ,6.x and other based roms.
This Kernel only supports ms013g and ms01lte.
BUILDS STARTING FROM R3 WILL SUPPORT 6.X MM BASED ROMS TOO!
!!!!WANING!!!!
Before posting, DO read EACH and EVERY "OP" POST made by me!! Any post which is rude, report bugs incorrectly,USELESS POSTS or ask for ETAs, WILL be REPORTED to the MODS!
All information you may be looking for can be found either in this thread or under F.A.Q or by performing a simple search. Think before you post.You have been warned!!!
Kernel features:-
Build with Latest UBER GCC 5.3.1 Toolchain(4/1/2016 - 5.3.1 UBERTC)
Based on latest sources by TW-LL-msm8226
Kernel compressed with xz compression
-O3 and other optimisation
disbaled gfs and enabled arch power
New CPU Governers-yankactive,zzmove,smartmax,yankdemand,intelliactive,elementalx,ondemandplus,bluactive
CPU OC/UC to 1.6 Ghz/192Mhz
GPU OC/UC to 533/100 Mhz
Several new i/o(zen,vr,sio,fiops,tripndroid,etc)
Added MSM Hotplug & Intelliplug
Using Anykernel2 by osmosis
Removed MPdecision
Added Kcal & Ksm
Added powersuspend
USB fast Charge
msm limiter
Franco's thermal drivers
headset high performance & soundcontrol v3.6
introduced workqueues
Fully permissive kernel
Simple GPU Algorithm
disabled DVFS and other stuffs
Busybox v1.24.2
Enabled Advanced Tcps(default:Westwood)
Upstream updates to f2fs,zram,etc.
Adreno idler
Lz4 compressor and Lz4 compressed zram
entropy updates and tuned zram values
miscellaneous updates
More(i forgot)
****NOTICE****
This is a kernel,so please do not expect REGULAR builds.New builds can be rolled out the same day or once in a week or maybe once in a month.
I will not add lots of fancy stuffs.whatever you see here goes under several tests first and if it performs well,then it is added.Suggestions are always welcomed!
Do not post external links or make mirros without my permission!
Please read FAQ properly, will try to answer all questions there and don't post uselessly and get yourself in trouble.
Recommended app for tuning: Kernel Adiutor
The lastest version TWRP (3.0.0.0) IS RECOMMENDED!
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
Flash the Kernel.zip
WIPE DALVIK/CACHE (for good measure)
Reboot!
Bugs:
hotspot not working in tw and 5.x roms
bluetooth speaker issues
simple omdemand crash
Downloads and Changelog in Post #2
NOTE:First boot may take some time,so while its booting,don't forget to press the thanks button!(its free)
Credits:
@aapav01 and the Tw-LL-msm8226 team
@Tarun93 & @Luffy.d for answering my noob questions :silly:
@neobuddy89 @hurtsky @osm0sis @franciscofranco @faux123@savoca @Alucard24 @myfluxi @Cl3Kener @h2o64
and all other great developers!
(If i forgot your name,then please Drop me a PM!!)
Thanks to my tester(s):
@Anxdafan
@praveensingh569
@Subhashis
@Swp1996
XDA:DevDB Information
Infected Kernel, Kernel for the Samsung Galaxy Grand 2
Contributors
neonkat
Source Code: TW/5.x,6.x
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2016-05-02
Created 2016-04-16
Last Updated 2016-05-15
----Downloads----
Ms013g Folder
TW-5.1.1/5.X
AndroidFileHost(Click ME!)
6.x marshmallow
AndroidFileHost(Click ME!)
-----------------------------------------------------------------------------
Ms01lte Folder
AndroidFileHost(Click ME!)
DO NOT CREATE MIRRORS!!IF LINKS ARE NOT WORKING THEN TELL ME!!!
Changelog:
Code:
R4;(x-05-16)
*switched to uber tc 5.3.1
*removed graphite and added other optimisations
*disabled some stuffs to save battery+performance
*GPU OC/UC to 533/100 Mhz
*CPU UC to 192 Mhz
*add msm_limiter
*fixed thermals,now less heating
*added:elementalx,ondemandplus,bluactive & removed intellidemand,intellimm
*tweaked governers
*enabled ksm
Older builds:
Code:
R3:(02-5-16)[only 6.x]
*same as R1 and R2
*-O3 and Graphite optimisation
*disabled gfs and ebaled arch power
*disabled zram
*improved cpu and gpu clocks
R2:(21-4-16)
*Franco's thermal drivers
*new gov.-intellidemand,intelliactive,intellimm
*wakelock toggles
*intelliplug
*simple gpu algorithm
*new i/o and updated other i/o's
*headset high performance & soundcontrol v3.6
*introduced workqueues
*Fully permissive kernel
*disabled DVFS
*fixed kcal
*lots of miscellaneous updates
*enabled last kernel_logs
R1:(16-4-16)
*initial release
FAQ
Q)How is the kernel?does it improve stuffs?
A-EITHER USE IT OR GTFO.
Q)does this kernel work with xyz rom?
A-this works with 5.x,6.x and tw ll based roms.
Q)Kernel didn't flashed!
A-put the kernel.zip in internal sd and flash.
Q)How to use Color Control?
A-use kernel adiutor or savoca's kcal controller app
Q)Developer!i am having a issue!
A-Get me a logcat and a dmesg with proper explanation to reproduce it.
Q)can you share good settings?
A-sure,check post #4
Q)will this work with v16.x?
A-worked for a few peeps so you can try it yourself
Q)why is there no boot.img?
A-because we are using anykernel script.
Q)will this fix offline charge bug?
A-their is no offline charge bug,only offline charge animation is not working.will fix it in future.
Profiles for my kernel
#Gaming(performance)
gov-performance/intelliactive/elementalx
max cpu freq-1593Mhz
i/o-zen/fiops
turn off adreno idler
thermals to 55-58^
#Balanced
gov-yankactive/yankdemand/intellidemand
max cpu freq-1401Mhz
i/o-sio
#Heavy Multi-tasking
gov-zzmove/ondemandX/blu_active
max cpu freq-1593Mhz
i/o-bfq
#Insane battery life
gov-smartmax/powersave
max cpu freq-1190Mhz/1094 Mhz
i/o-noop/fifo
P.s-very few stuffs but will be updated as new things will be added to kernel.
Want your our setup?follow this.
Remember the Drill
reserved ???
nice work buddy
Bro Will it fix dim color problem??
M still facing this issue in motion v17...
Finally someone liten my request thank you
VARUN KHASIA said:
Bro Will it fix dim color problem??
M still facing this issue in motion v17...
Click to expand...
Click to collapse
i have used the rom for a while and i got no such issues and i read that some users fixed this issue by proper installation.do check motion rom thread.
if you still have issues,then let me know,will try to fix it.
Till then,enjoy and let me know what improvements i can add in kernel.
@neonkat can u post source of this kernel
Edit : I got
neonkat said:
i have used the rom for a while and i got no such issues and i read that some users fixed this issue by proper installation.do check motion rom thread.
if you still have issues,then let me know,will try to fix it.
Till then,enjoy and let me know what improvements i can add in kernel.
Click to expand...
Click to collapse
Bro I installed rom with correct steps.. But still facing.. Bro if u can try double tap screen to wake, swipe screen to wake.. About the performance I m testing this.. Tell u soon..
VARUN KHASIA said:
Bro I installed rom with correct steps.. But still facing.. Bro if u can try double tap screen to wake, swipe screen to wake.. About the performance I m testing this.. Tell u soon..
Click to expand...
Click to collapse
okay,will look into it.
yeah,i have added that to my todo list for next builds.(was having some issues so dropped for R1).
EDIT: i need some testers,if you want to join then drop me a Pm.
adityaupreti said:
@neonkat can post source of this kernel
Edit : I got
Click to expand...
Click to collapse
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
neonkat said:
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
Click to expand...
Click to collapse
Ok bro i will test and tell
---------- Post added at 11:01 PM ---------- Previous post was at 10:46 PM ----------
neonkat said:
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
Click to expand...
Click to collapse
bro jst flashed kernel really awsm my battery is now improved and boot time also Discreased smooth going to test some features now
neonkat said:
okay,will look into it.
yeah,i have added that to my todo list for next builds.(was having some issues so dropped for R1).
EDIT: i need some testers,if you want to join then drop me a Pm.
Click to expand...
Click to collapse
Bro I tried it.. Games are lagging.. Like subway surf.. Otherwise good..
VARUN KHASIA said:
Bro I tried it.. Games are lagging.. Like subway surf.. Otherwise good..
Click to expand...
Click to collapse
maybe because of the ram,for me(on fresh install)games were going smooth.
try switching to other governers(like zzmove,yankdemand).
will look into ram management.
neonkat said:
maybe because of the ram,for me(on fresh install)games were going smooth.
try switching to other governers(like zzmove,yankdemand).
will look into ram management.
Click to expand...
Click to collapse
Ohk bro..try changing gov.
add fm modules ?
In this kernel will be added FM radio modules ,so we have a full-fledged FM radio ?
Siemens92 said:
In this kernel will be added FM radio modules ,so we have a full-fledged FM radio ?
Click to expand...
Click to collapse
nope.
you may ask rom-developer.
Hello everyone, it's a pleasure for me to share this great kernel; this is focused on stability and battery life
My dream (since I bought this phone) has been to have a kernel that suits my needs, to have great features and a rock-solid stability
I put all my time and heart to get this awesome product.
Please read this thread carefully. I will try to do my best to help you if you do the same
I'm back at it again, wishing you a happy new year and with a shiny new kernel, with a LOT newer kernel base and with a LOT of unneeded crap removed, this project has taken me more than a year to polish and I'm still doing it, but I've reached a state where I think it can be tested by you. My second m4 has completely broken (because it fell down xD), so that's why I need you guys to test it and give me feedback.
I promise you that it this is a whole different experience, you won't have any random reboots or battery drains at all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Code:
I, nor xda are responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it or it kills your neighbor's dog. Flash at your own risk.
Some notes:
THIS WILL WORK ONLY ON UNLOCKED BOOTLOADERS
For now I won't be adding features because I need to finish other things
About features:
Compiled with Linaro 4.9
Improved cpu frequency scaling, before it used to ramp like crazy, and now if you aren't doing anything it will stay at the lowest freq, you can use this app to check
I've also added a wifi module replacement procedure that will Always Work(TM), regardless if it has been screwed up by other custom kernels, so you won't need to worry about no wifi and/or moving the module manually
Latest upstream Linux kernel version 3.10.108
Optimizations from LineageOS (I've based my kernel on their kernel for the msm8916 family)
This kernel is based on the latest tag of the CAF branch for the msm8916 family on nougat (LA.BR.1.2.9), which has got a lot of security and stability patches compared to our ancient stock kernel base
Cubbins' kanuti_hwid driver for bands -> The stock kernel had a really crappy solution for the mobile bands of the world regions, so this awesome guy coded a driver for this!
Pure mdss driver + pcc adjustments
Pstore support
Latest sdfat opensource filesystem, replacing the ancient and closed source tuxera module
Usb HID keyboard/mouse support you can install this and you're good to go!
Refactored bmm050 magnetometer driver
bma2x2 accelerometer sensor driver from CAF -> The stock kernel had an extremely initial and ancient version of this driver, I've spent more than a month porting it to the improved and newer driver from CAF
A LOT of cleanups everywhere, most likely you won't get to understand the big amount of removed crap so I'd suggest you to check my source repo
To control the kernel:
Use Kernel Adiutor
Installation instructions:
Just go to recovery and flash the zip!
Enjoy :')
Downloads:
https://drive.google.com/open?id=0BwBZLmXTjkbJU21neUxXZVV1UEE
Thanks To/Credits
-Cubbins, all of this hadn't been possible without his support
-The sodp guys that worked on the 3.10 AOSP kernel for tulip
-zachariasmaladroit
-AndyPhoenix9879
And other whose autorship are on my commits
Testers:
Huge thanks to them! You are enjoying this kernel because of their precious help!
@Pachops427
@Mark.05
@kamilkos16
@moustafa.badry
If you've been a tester and I haven't added you, it's because I don't know your username, so please let me know and I will add you here
XDA:DevDB Information
Destiny, Kernel for the Sony Xperia M4 Aqua
Contributors
dani020110
Source Code: https://github.com/danielgusvt/destiny
Kernel Special Features:
Version Information
Status: Testing
Created 2017-01-11
Last Updated 2017-07-22
Changelog
I will add the new changelog starting with the next build!
Reserved
Reserved
Just in case
Great! Now we can have more battery life
Hi @dani020110!
First and foremost, thanks for sharing your kernel!
After reading the mutha [email protected]#k'n thread, i did not yet find what features it does have.
You only state that we can't ask for unstable features.
Can you give us a spec list?
Thanks!
Oh and one more thing....no love for E2363?
Waancho said:
Hi @dani020110!
First and foremost, thanks for sharing your kernel!
After reading the mutha [email protected]#k'n thread, i did not yet find what features it does have.
You only state that we can't ask for unstable features.
Can you give us a spec list?
Thanks!
Oh and one more thing....no love for E2363?
Click to expand...
Click to collapse
When I have time, I add the features list and release for you variant
dani020110 said:
When I have time, I add the features list and release for you variant
Click to expand...
Click to collapse
Thanks!
Thank you so much! Finally a kernel with display control, i see in your commits you're working in Faux Sound, it isn't? I hope you can make it work, i buy the app a long time ago lol and a i want to use it lol, whatever, good work and good luck, i'm waiting the next version.
RodrigoKunJPN said:
Thank you so much! Finally a kernel with display control, i see in your commits you're working in Faux Sound, it isn't? I hope you can make it work, i buy the app a long time ago lol and a i want to use it lol, whatever, good work and good luck, i'm waiting the next version.
Click to expand...
Click to collapse
If I recalled, he had some problems with Faux Sound Control (speaker suddenly became very very quiet) so he disabled it for now.
Waancho said:
Hi @dani020110!
First and foremost, thanks for sharing your kernel!
After reading the mutha [email protected]#k'n thread, i did not yet find what features it does have.
You only state that we can't ask for unstable features.
Can you give us a spec list?
Thanks!
Oh and one more thing....no love for E2363?
Click to expand...
Click to collapse
Well, I've just added the features list; maybe today or tomorrow I'm uploading the second release and support for the E2363
hey , could you add wake gesture such as double tap to wake or it is unstable feature ?
fadyzico said:
hey , could you add wake gesture such as double tap to wake or it is unstable feature ?
Click to expand...
Click to collapse
It is a unstable feature.
What about brightness control or just lowering the brightness a little bit?
Waancho said:
Hi @dani020110!
First and foremost, thanks for sharing your kernel!
After reading the mutha [email protected]#k'n thread, i did not yet find what features it does have.
You only state that we can't ask for unstable features.
Can you give us a spec list?
Thanks!
Oh and one more thing....no love for E2363?
Click to expand...
Click to collapse
According to @EHSAN™ you can use the e2333 build
fadyzico said:
What about brightness control or just lowering the brightness a little bit?
Click to expand...
Click to collapse
Already added :,)
Does it work on E2306 with MM? Great work by the way!
ZxDax said:
Does it work on E2306 with MM? Great work by the way!
Click to expand...
Click to collapse
Yeah it does work flawlessly on E2306, I tested it because is my variant
kernel not working in sony m4 e2312
I used sony e2312 26.3B.1.33 stock android 6.0. I certainly did the right thing under the guidance and download the e2312. after flash your kernel, I restarted the sony logo But it has powered off and I've tried restarting but still did not fix the situation. I think that your kernel fails. wish you help me fix this soon
new update not working e2333
reboot at sony logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, this is my personal kernel for the OnePlus 5. While I am not a super star kernel developer, I do know my way around it. Hopefully you enjoy :highfive:
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Based on GzR kernel
Up to date with the latest stable Linux version (4.4.159)
Up to date with the latest CAF branch (kernel.lnx.4.4.r27-rel)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Several subsystems converted to use power efficient workqueues
Backlight dimmer
KCAL color control
CPU Input Boost driver
Devfreq Boost driver
Sound control
Wakelock control
Westwood as the default TCP algorithm
Built with the latest Google Clang 7.0.2 toolchain
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Primary: https://androidfilehost.com/?w=files&flid=283181
Through TWRP:
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Reaper version to the other:
Just flash the kernel zip and reboot
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: My daily driver is GZOSP so I test all the builds on this ROM but this kernel should work on other pie ROMs. If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking GZOSP compatibility, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience. To control the user visible features of the kernel listed above, I recommend using @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
The various other developers for their patches
@martinusbe, @nathanchane for their work on GzR kernel
@nathanchance for android-linux-stable organization, thread inspiration, patches, tips and for inspiring me to start kernel development
@KuranKaname for helping me with kernel and being a bro
@nychitman1 for him work on DU kernel (lots of patches are inspired from him work)
@mady51 for introducing me in kernel development
@osm0sis for AnyKernel2
@akhilnarang for him modified AnyKernel2 for OP5, help and patches for my kernel
All of you guys for viewing the thread
reaper (custom ROMs - 9.0): https://github.com/FRNKSTN/Reaper/tree/reaper
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
Reaper, Kernel for the OnePlus 5T
Contributors
FRNKSTN, martinusbe, KuranKaname
Source Code: https://github.com/LiquidRemix-Devices/android_kernel_oneplus_msm8998
Kernel Special Features: HMP
Version Information
Status: Stable
Current Stable Version: 20180930
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-15
Reserved
Reserved
Great job
fowzanaamir said:
Great job
Click to expand...
Click to collapse
Thanks
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
For castom or OOS ?
Ideas4ya said:
Nice kernel, so far it's very responsive and idles at 300 consistently using interactive. Looking forward to increased standby battery life. You rock!!
Click to expand...
Click to collapse
Thanks! I'm glad you like
[email protected] said:
For castom or OOS ?
Click to expand...
Click to collapse
For custom ROMs only
Can we OC ? thx
mannyalba said:
Can we OC ? thx
Click to expand...
Click to collapse
Give me commits for that and I'll take a look
Using on CRdroid 9.0 and is all working a treat great work
Sent from my ONEPLUS A5010 using Tapatalk
danny19901 said:
Using on CRdroid 9.0 and is all working a treat great work
Click to expand...
Click to collapse
Thanks
Delivered on the crDroid 8.1. While everything is fine
[email protected] said:
Delivered on the crDroid 8.1. While everything is fine
Click to expand...
Click to collapse
Very cool :highfive: Let me to know if all is working perfect.
manojpawarsj12 said:
Good work ?
Click to expand...
Click to collapse
Thanks
FRNKSTN said:
Very cool :highfive: Let me to know if all is working perfect.
Click to expand...
Click to collapse
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
mukesh22584 said:
I like your work so much, and I know you do everything perfect, I'll add your kernel in my build as default kerenl as soon as I'll get time to build.
Best of luck [emoji106]
Click to expand...
Click to collapse
Thanks, bro! This is cool
FRNKSTN said:
Give me commits for that and I'll take a look
Click to expand...
Click to collapse
No idea how to do that, i mean overclock/underclock ?
mannyalba said:
No idea how to do that, i mean overclock/underclock ?
Click to expand...
Click to collapse
Check FAQ