Hello i have a tablet X-tab phoenix easy touch environmont 4gb
the tablet dosen't start (only in boot mod i can enter)
i have the rom for inet 86ve rev01
zeng gc 2012-12-06
the problem is when i try to rom i get an error
(e: Short write of /tmp/sideload/package.zip (No space left on device)
i tryed to instal an recovery mod img but i cannot instal cuz of Signature Verification Failed
+ i get some errors when i enter in boot
e: Error in /cache/recovery/last_log
(Read-only file system)
e:Can't open /cache/recovery/last_install
it seems that is not other recovery for my tablet so i have the own recovery (android system recovery 3e)
i dont know what to do more :| plz help
I have a friends phone that gets stuck at the Samsung glowing logo during boot.
I can access download mode (Odin). In Odin mode I have tried to download files using the Odin3 (3.07) Windows app, along with the packaged cooperve_0623.pit, and S5830i_XXLA2_ODDLA1_DDLA1_by_Domnic79 (CSC, Modem, PDA). Odin download seemed to go OK. However on reboot I still see the same boot cycle, nothing more.
I can also access Recovery mode. (Vol+, Home, Power).
Here I see
Code:
Android System recovery <3e>
Android system recovery utility.
...
If I select "Apply update from sdcard I get:
Code:
Install from sdcard complete
E: failed to mount /sdcard (No such file or directory)
E: Can't mount /sdcard
(Assuming this is referring to the external sdcard slot, then this makes sense. There is no sd card.)
When I select reboot now
I see
Code:
--Applying Multi-CSC--
Multi_CSC: There are common apks
E: failed to mount /data (Invalid argument)
E: copy_log_files_to_data :: can't mount /dataRebooting...
When connected to the device in recovery mode, on my PC I see a few devices with warning labels under Device Manager. These are CDC Abstract Control Model, CDC ACM Data, CDC OBEX Data, CDC Object Exchange.
I have Kies installed. This is a handset for United Kingdom use.
I'm at a bit of a dead end. Because this phone is fairly old a lot of the links seem to point to files that are no longer hosted, or worse are hidden behind crappy subscription walls.
Any help appreciated.
hi @captainbadger, First get yourself SD card ( formatted properly for further use inside your legacy device ) , then follow through @ post#4 ; my comments ; starts from the line "1. Download one of the newest ,, till you reach the end of the post" , and log file entry of your Odin is much appropriated for the record mate. <Uninstall/disable kies , pretty useless piece of software and tempting to get in the way>
OK thanks I'll give that a shot.
Hello,
First of all, my english isn't very good.
Ok, I have a huge problem with my lenovo k3 note, I was listening to music yesterday and suddenly it stopped. I tried to unlock, restart itp but nothing. Finally I took off the battery and they restarted the phone, it stopped on Lenovo bootloader, so again battery, restart and this time I went to TWRP recovery. I wanted to restore one of my backups, but there is no backups, internal storage is 0mb, I can't do factory reset, I can't install any zip, nothing. Windows 10 sees just external SD card, no intenal memory.
Entering TWRP makes errors in console like this:
E: Could not mount /data and unable to find crypto footer.
E: Unable to mount '/data'
E: Unable to recreate /data/media folder.
Updating partition details...
E: Unable to mount '/protect_f'
E: Unable to mount '/protect_s'
E: Unable to mount '/cache'
E: Unable to mount '/data'
...done
E: Unable to mount storage.
E: Unable to mount /data/media during GUI startup.
and some more "unable to mount /data".
So I tried to flash original rom with sp flash tool, but on my last rom (MIUI 7 custom) I didn't enable USB debbuging. Every stable ROM or flash tool version I try, every time and the end there is BROM ERROR: S_CHCKSUM_ERROR (1041) and if I boot my phone after such flash it stops on bootloader and in TWRP still internal storage 0mb. I've tried do sth with adb but it doesn't detect my phone, flash tool works though.
I don't know what to do, please guys help me! It's my first android phone and rooting a phone and recovery was a challenge (just installing roms from twrp is very easy) and I really need your help, so please help me.
Thanks in advance and have a good day!
lenovo k3 error 1041
did you solved the problem with lenovo k3? i have the same problem
Oky Guys so i was working and had a little problem, The phone restarted on it's own and was fixed on the Samsung Galaxy SIII screen (no bootloop). I am a rooted user and am running a BlissPop Android 5.1.1 based custom ROM on my device. Anyways the problem is that although i can boot into recovery (TWRP)
When i try to wipe the Log says :-
E: unable to mount '/data'
E: Unknown MTP message type : 1
E: Unable to mount storage
E: Failed to wipe dalvik
Then again if i try a restore or Install a new ROM, everything gets installed correctly except for the same error
E: Unable to mount ' /data '
E: Unknown MTP message type: 1
Please guys suggest something and if anyone else has had the same problem and has somehow resolved it then surely tell me how.
Thanks in Advance guys
-Reserved- for Screenshots and further information, If i am able to get it
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Gizzy00360 said:
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Click to expand...
Click to collapse
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
petitgregory said:
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
Click to expand...
Click to collapse
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Gizzy00360 said:
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Click to expand...
Click to collapse
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
petitgregory said:
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
Click to expand...
Click to collapse
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Gizzy00360 said:
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Click to expand...
Click to collapse
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
petitgregory said:
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
Click to expand...
Click to collapse
I had a few reboots when it was working, then it just suddenly bricked my phone
Sounds like the eMMC brickbug. You need to get the eMMC replaced. All of you that face the problems.
Well, after four years my S3 was getting very slow. It was bearable with CM, but I decided to say farewell now.
Also, my microphone was busted when I dropped it at some point, so I could only call with a headset anyway.
It's not worth replacing I think, time to move on
The same happened to my Beelink GT1 S912 9377 TV-box (after failed OTA update). Will check eMMC brickbug (from TWRP) ...