Related
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Download the firmware first from lenovo. Blogspot, search for the a369i s108, Then download the latest sp flash tool and follow the methods by typing : how to flash lenovo a369i... U can find it here
Sent from my Lenovo A369i using XDA Free mobile app
---------- Post added at 04:12 AM ---------- Previous post was at 03:56 AM ----------
http://forum.xda-developers.com/showthread.php?p=55744573
Sent from my Lenovo A369i using XDA Free mobile app
AnonymousV3 said:
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Click to expand...
Click to collapse
Flash stock rom using SP Flash Tool
download the firmware then flash it with sp flash tools.
Im Also Having Same Problem Maybe Even So Terible [sorry for my english]
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Brom error!!
mh1368 said:
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Click to expand...
Click to collapse
Hello mh1368,
Sorry to hear about your issue.The S_FT_ENABLE_DRAM_FAIL Occurs when you have used an unsupported scatter loading file...at this point when you click download in sp flash tool, the bootloader is cleared but due to the wrong scatterer loading file the new firmware does not get flashed leaving behind a bricked smartphone:crying:.But no need to worry its just a soft brick:laugh:.We can get your phone back to life through certain steps.Can you tell me your about your build no??
Just flash this
https://drive.google.com/file/d/0B_KxHkaDeA14QWM0QkNUZzRuMHM/edit?usp=sharing
and it will work
I also have this kind of problem in my lenovo a369i but case is that after i flash row_s108 thru SPFT , I cannot turn on my phone anymore and i tried to flash again but SPFT doesn't recognize my phone anymore.. Is there any way to fix this problem??
Any information is a big help.. Thanks In Advance
A few days ago, I'm working with my phone when suddenly went out. When I try to turn it on, nothing happens (no recovery, no charge...). I think it's a hardbrick. The phone only has a month and I had tried some rom before, so I thought it might be some corrupted file. The only thing it's when I connect with the computer, it recognized as MTK USB Port, so I've tried to flash the stock rom with SP flash tools.
However, I have 4032 error: Enable dram fail with this rom. I've tried also with another roms (about 20 roms from W450 and another MTK6582) because I'd read that it could be an incorrect preloader, but nothing works . I think it could have some solutions:
- A correct preloader.bin, but I don't find anything
-¿Drivers problem? I think not, because shows MTK USB Port, but I'm not sure...
- I would like to try with a backup from a W450, but I only have nandroid backups, and I want a backup for MTKDroid.
Is there another solution? I'm desperate, I hope to fix my poor W450
Mobile: W450 with new touch (There are W450 with old screen touch).
MTK 6582 (1gb RAM+ 4gb ROM)
Original Baseband: P11 with URiver logo.
(Sorry for my English, I'm from Spain)
hi friends i am new at this forum and need some help, before this, I usually figured everything out by reading others thread or googling. But now I need your help guys. I recently try to flash my i ball cobalt 4 with the stock rom of the same version [downloaded from needrom.com],But I probably did a mistake and I was messing up with bootloader. The result is that my phone wont even start. No bootloop, no recovery, nothing. Display and everything else remains dead.
At least is phone still detected by computer when I connect it as mtk usb port[it is on META mode now i think]
Also in Smart Phone Flash Tools phone is still visible.
But when I try to flash or format anything it gives me this error message:
It says:
"BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]: Please check your load matches to your target which is to be downloaded"
I already tried different versions of SPFT and also stock cobalt 4's ROM's from diferrent sources.cleaned mtk deivers many times by using usbdeview according to tutorial. but sadly did not get any success.
My OS is Windows 7x64.
Please guys, this is the first time I'm asking for a help, because I am really desperate and I don't know what else try to make my phone flashable and working again. I googled, searched lot of topics, everything what I was capable to think about. I would be super gratefull for help.
THX guys for your suggestions and help!!!
BTW: I heard some phones can be turned to some kind of "service" bootloader mode with connecting two contacts on main board of phone. Do you know if iball cobalt 4 have this function?
one more thing is that when i selected scatter file first time in spft it gave me an error invalid scatter file so i had to delete scatter file's first line[ie birdtoolminver3.4].so is the scatter file is problem of mentioned error.
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
alvarmat said:
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
Click to expand...
Click to collapse
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
deceiver7 said:
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
Click to expand...
Click to collapse
alcatel one touch pixi 3 (10) WI-FI ? or 3G ?
on 3G (9010) a lot of information
very necessary for wi-fi (8079).have on hand?
download this official updater: https://1drv.ms/u/s!AvUqW-s0ZKJvhVoy4gT1Oiynk8Av choose your model (mine was 8079 - made by TCL as stated in the box).
Hello
@calculo. The program doesn't recognize tablet in the step 3/4 and tablet keep in bootloop. I need the Stock Rom to be able to use it with Sp Flash tool. If you could upload it, I would appreciate it.
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Guys, need help pls. Got one Pixi 3 3G 10 dual sim device (9010X), went to flash it via SP tool, but it seems I bricked it. Possibly with wrong FW. Now tablet is dead, nothing on screen, but on USB connetion, computer play sound wheni iI connect it . SP and AutoUpdater tools won't recognize it. Any hope here? thanks
EDIT: I got it again recognazible by SPFT by removing the battery, It is flashable again, need correct FW, but can't find it anywhere
Guys need help please! ?
My tablet is dead! "Pixi 3 3G 10 device (8970)" nothing on screen, but on USB connetion, computer play sound when i connect it and receive a message "USB device not recognized" . SP won't recognize it. Any hope here? Thanks
Pixi 3 3G 10 device (8970)
After i tried to upgrade firmware with Mobile Upgrade S Gotu2 it didnt even pass second task only said network error my "Pixi 3 3G 10 device (8970) has nothing on screen and i recive message "USB device not recognized on my computer.
I tried with sp flash tool installed the mtk driver on win7 and on win 10 but it doesnt recognize the usb can someone pls post how to properly install drivers for sp flash
Any help is appreciated
caculo said:
download this official updater: choose your model (mine was 8079 - made by TCL as stated in the box).
Click to expand...
Click to collapse
Thank you, Thank you, Thank you ...... This worked for me after 8 hours of trying to fix my hard bricked pixi phone!:good:
Yep, I have managed to brick my pixi 3 (10). I have tried to root my device, but Kingroot failed.
Then I've tried to TWRP (https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944) and my device went to bootloop it self with garbled screen (while connected on PC i've heard device connected - device disconnected sound constantly)
And finally I've tried with this https://forum.xda-developers.com/showpost.php?p=72854696&postcount=4 and device stopped with bootloop immediately after I've clicked on Yes in dialog "To begin please confirm that your device's battery is fully charged..."
But it has stopped to boot at all, and now when I connect device to my PC I get message "USB device not recognized"...
Is there any hope, or I should use this tablet as a frisbee?
hola quisiera q alguien me alludara a saver si la rom de la tablet pixi 3 10 8080 es el mismo sistema con el 8079
alvarmat said:
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Click to expand...
Click to collapse
@alvarmat Could you provide more infomation on the battery charging part? I'm trying to unbrick a Pixi 3 8079 that won't charge, but I'm on the fence of doing something like that for fear it may damage the battery and the circuitry. Which charger did you use?
SOLUTION
Maybe it's late but i hope it helps someone
Chain 2 AA batteries in serial, end to end , connect 2 cables on both ends using electrical tape. - end ground to the metal CPU cover and + end touch solder on red wire coming from the battery for a minute and the device should turn on.
There is a guide on YT using voltmeter but I'm guessing like me you don't have one
Don't use the stupid update tool!