So, some specific touchscreen regions are not working on my A116. It is the same with all Roms. Has to be a hardware issue right? 1 cm horizontal region on top as well as the bottom don't respond to touch. So, anyone here knows what would be the cost to get this fixed or get a new touchscreen?
it would take around 2000 from service centre to get touch replaced, or try for local vendor it will cost 1300 approx
Related
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
same problem
Hi gauge41,
I have the same problem :crying:. Do you have a solution ?
I bought my touchscreen on uk by ebay.
Reference:
cgi.ebay.fr/NEW-DIGITIZER-TOUCH-SCREEN-LENS-FOR-HTC-7-MOZART-T8698?item=270791784120&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D5080495740069852992
All updates have been done through Zune software without changes.
Best regards.
gauge41 said:
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
Click to expand...
Click to collapse
I've read somewhere, that there are two modifications of a touchscreen for mozart and they are not compatible, so if your previous digitizer didn't have a circle around windows button, but new one does, mirrored input is definitely because of that. Haven't heard of any registry tweaks to fix that, and I don't think you can fix it by installing different rom. You should probably get a compatible digitizer replacement or try installing different touch screen drivers.
After a waiting 2 months to get the tablet fixed in the US (and 40£ spend on postage) the battery on my touchpad was fixed.
Was very happy to see it rendering something again until I've noticed that 1/3 of the screen doesn't work when I touch it.
And it's consistent. If I move it around to portrait and landscapte modes the same area doesn't work.
The device fisically doesn't look damaged. And the image looks ok even on the area that doesn't respond to touch.
I don't think this is a software issue but I don't want to send it back to the states and spend another 40£ and two months to get it fixed without trying other options.
Can anyone help me to try out some other things?
If this is because some connector to the screen is not attached is it possible for me to open and fix it myself or does this prove that the hole screen needs to be replaced?
Thanks.
what is fisically?
psp888 said:
what is fisically?
Click to expand...
Click to collapse
physically
hi there
I've got some strange issue with my lcd screen on my atrix. Everything is on this video(sorry for quality):
http://www.youtube.com/watch?v=bbMsmbblXLc
I don't know what to do- i don't have my warranty because of unlocked bootloader(in Poland they are very strict and surely they won't fix this on warranty.
So the issue is: when i touch near front camera/ front speaker the virtual finger appears. The second thing is that when i touch in showed area
there are 2 touches from one finger. It isn't a rom issue because it is on all roms i've tested.
If you have any idea what should i do please write it
Thanks in advance for any help
I'd say your digitizer is dying. Except unlike most others where a part of the digitizer stops registering touches, yours registers multiple touches. Either way, I believe buying and installing a new digitizer would fix this problem.
After a night which phone spent in home there is no additional touch in this line. Of course the issue with touching near camera didin't disappear.
Maybe it is because of very low temperatures in Poland nowadays and i think there can be some water inside of phone. But as you said
i'll think about changing digitizer
Hello
I have problems with the phone, I thought it was for the last flashing ROM LiquidSmooth, but even after the factory setting and load a new ROM problem remains the same.
At the bottom of the screen, about 1.5 cm from the bottom edge of the phone detects bad touch, which will be reflected in writing when you press "L" activity to side letters either left or right, if I'm somewhere in the menu item is placed in the bottom of the screen do not respond . So far, it solves turning the phone 90 or 180 degrees.
It would be a repair is not possible or advantageous to buy another phone?
Thanks for your response
beldy said:
Hello
I have problems with the phone, I thought it was for the last flashing ROM LiquidSmooth, but even after the factory setting and load a new ROM problem remains the same.
At the bottom of the screen, about 1.5 cm from the bottom edge of the phone detects bad touch, which will be reflected in writing when you press "L" activity to side letters either left or right, if I'm somewhere in the menu item is placed in the bottom of the screen do not respond . So far, it solves turning the phone 90 or 180 degrees.
It would be a repair is not possible or advantageous to buy another phone?
Thanks for your response
Click to expand...
Click to collapse
It's pretty common issue. The only way to fix it It's by replacing digitizer.
It's a faulty digitizer problem.
I have my evo 3d for 2.5 years. After a year, my screen started messing around, I took the phone to the repair shop, the guys there replaced the digitizer and it works like a charm ever since (which is about 1.5 years later).
So, just find a good repair shop. and don't worry.
Hello there,
My Pocophone died yesterday. I've send it to the retailler. Dunno if there are going to fix or replace me by a new one ?
I bought it in september (first batch) and i've got touchscreen issue with the latest stable miui 10 (10.0.60)
Some have issue, other don't have the issue.
So it's LCD or Motherboard or software (which doesn't fix everything) ?
If they'll fix my phone by changing the motherboard (can't start the phone, it staying black and i can't charge it, no led blinking)
Can i hope better touchscreen ?
Thx
Install latest Pie stable or beta 8.12.10, your problem will be fixed.
hero355 said:
Install latest Pie stable or beta 8.12.10, your problem will be fixed.
Click to expand...
Click to collapse
Not really
Pie stable = touch delay around edges,try type 'q' then 'i' it outputs 'iq' pubg aimiing can't detect small swipes,
8.12.10=touch dela around edges is fixed pubg aiming fixed BUT lots of touches sometimes not registering around the nav area and if your apply so much pressure on the screen lots of ghost touch will happen
I can't install anything, i have no more phone for the moment...
I was on 10.0.60 and i have swap letter when i'm trying iq qi...
And touchdelay when scrooling down and up
Also high sensitivity on touchscreen
I've disabled multitouch screenshot
My phone has been fix by the retailler. I didn't receive it yet but the motherboard has been changed..
I'll see if i'll still have touchscreen issue when i'll get it back