The last 2-3 weeks i have really strange problem with my P780. When i try to charge it the level of the batter does not change (tried with 3 differet chargers) so propably you think that something wrong with the battery is going on. But whenever i reboot it or reseting it the level of the battery that appears after the reboot is different.
I changed the battery I ordered a new one but still the same problem occurs (at the beginning when i plugged it in it seemed that it was charging from 50% it reached 78% but then stopped and when i removed the charger it started going down really quick and when i rebooted i had 0% again)
Any ideas?? Thanks
chrichat said:
The last 2-3 weeks i have really strange problem with my P780. When i try to charge it the level of the batter does not change (tried with 3 differet chargers) so propably you think that something wrong with the battery is going on. But whenever i reboot it or reseting it the level of the battery that appears after the reboot is different.
I changed the battery I ordered a new one but still the same problem occurs (at the beginning when i plugged it in it seemed that it was charging from 50% it reached 78% but then stopped and when i removed the charger it started going down really quick and when i rebooted i had 0% again)
Any ideas?? Thanks
Click to expand...
Click to collapse
What firmware do you have? Tell us more! Details Details !
stympy said:
What firmware do you have? Tell us more! Details Details !
Click to expand...
Click to collapse
I have reset factory setting and the firmware now is S116.
And i have just flashed life 0.70 and still the same problem
chrichat said:
And i have just flashed life 0.70 and still the same problem
Click to expand...
Click to collapse
Flash Kitkat S226 then OTA update to S228 see if works, then flash Baralajbi VibeUI 2.0 and tell us what is going on!
If this 2 firmware dont work you might have a problem with your motherboard! Go to a service store!
Good Luck!
I flashed s226 and nothing worked. THen i tried to flash s228 and forgot to press DA_DL_ALL_WithCheckSum and i got stuk on screen with dll error, so i tried to reflash it an get an error from the flashtool S_FT_READBACK_FAIL(4009) and my phone can neither be flashed or hard reseted..... i am almost ready to throw it away... any ideas??
chrichat said:
I flashed s226 and nothing worked. THen i tried to flash s228 and forgot to press DA_DL_ALL_WithCheckSum and i got stuk on screen with dll error, so i tried to reflash it an get an error from the flashtool S_FT_READBACK_FAIL(4009) and my phone can neither be flashed or hard reseted..... i am almost ready to throw it away... any ideas??
Click to expand...
Click to collapse
Prepare your phone and press small red button for 20 seconds from the back of the phone near sd card slot. That one is the hard reset.
Sent from my Lenovo P780
stympy said:
Prepare your phone and press small red button for 20 seconds from the back of the phone near sd card slot. That one is the hard reset.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have done it and nothing changes still dll image Fail and still can not be flashed either with S226 or S228
chrichat said:
I have done it and nothing changes still dll image Fail and still can not be flashed either with S226 or S228
Click to expand...
Click to collapse
Try to reinstall the drivers ! I think your preloader is messed up !
Ηοw can i reinstal the drivers?
s_ft_readback_fail (4009)
I recieve this error when i am trying to flash again my device any help how can fix it?
chrichat said:
s_ft_readback_fail (4009)
I recieve this error when i am trying to flash again my device any help how can fix it?
Click to expand...
Click to collapse
If you want, we can do a team viewer sesion so i can see what is going on !
Well sure this can be very helpful, can we speak somehow through emails or private messages? My email is [email protected]
..
chrichat said:
..
Click to expand...
Click to collapse
SOLVED using SP Flash Tool v5!
Related
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Try taking the battery off for 24 hours.
then try to light it up...
Nadavi.
1:00AM will wait for 24 hours
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
inertiax3 said:
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
Click to expand...
Click to collapse
Could you please upload or link me to all the correct modem drivers needed to flash the phone part?
Thanks,
Eran.
search the forum, it 's there
any other tips?
waited for 24 hours :| sill doesn' work
i have same trouble...when i upgrade the phone dead because batrey low..now the phone dead. please same body help....
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
amisui said:
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
Click to expand...
Click to collapse
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
come on , can same body help us. !!!!!!! any sofware can flash i780 with dead position? i think the phone dead because not boot+rom+phone instaled. mirage updater only can flash in on condition.
nCoder said:
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
Click to expand...
Click to collapse
Thank nCoder for your trick, i'll try to night
http://www.youtube.com/watch?v=XJ6l_sSHfec
http://www.youtube.com/watch?v=Fz2II5euldc
I follow you trick lick battery then press start (only start button / shift+enter and start)
but it not happend when i press start button.
what i was wrong?
best regard,
To Upgrade samsung i780
Hi i want samsung i780 firmware OS and it's procedure.
I just got a new LG g3 yesterday. Worked fine for about an hour. Started crashing. Green Screen with crash handler with options to reboot or dump. It would boot up and then crash again. Also received a Kernel crash black screen. So I decided to flash new dll file and tot file using lg flash tool. Put into stock download mode (firmware update Screen) and started flash. Went to 19% the screen went black acted like it turns off and disconnects and fails. Tried 4 different cords with not very different results. the furthest it got was 49%. Now it is stuck in firmware update screen. I remove battery and turn on phone it goes to lg boot screen and then firmware update. If the phone is off and I plug into wall charger the screen shows battery symbol with spinning thing and then firmware update screen comes on. Please help. Thanks for any input in advance.
chelstromj said:
I just got a new LG g3 yesterday. Worked fine for about an hour. Started crashing. Green Screen with crash handler with options to reboot or dump. It would boot up and then crash again. Also received a Kernel crash black screen. So I decided to flash new dll file and tot file using lg flash tool. Put into stock download mode (firmware update Screen) and started flash. Went to 19% the screen went black acted like it turns off and disconnects and fails. Tried 4 different cords with not very different results. the furthest it got was 49%. Now it is stuck in firmware update screen. I remove battery and turn on phone it goes to lg boot screen and then firmware update. If the phone is off and I plug into wall charger the screen shows battery symbol with spinning thing and then firmware update screen comes on. Please help. Thanks for any input in advance.
Click to expand...
Click to collapse
I had to replace two g3s bad software
Sent from my LGLS990 using XDA Premium HD app
got an update on my problem. I re downloaded tot file and dll file and tried again got to 94%. it booted showed android guy for a sec and then booted again and showed miniOS with music looking bars moving up and down and then showed blue screen with Factory reset status and a big red number 2. not 3. help please.
If i try to turn it on it gives me the same thing mini OS and then Factory reset status big red number 2
chelstromj said:
got an update on my problem. I re downloaded tot file and dll file and tried again got to 94%. it booted showed android guy for a sec and then booted again and showed miniOS with music looking bars moving up and down and then showed blue screen with Factory reset status and a big red number 2. not 3. help please.
If i try to turn it on it gives me the same thing mini OS and then Factory reset status big red number 2
Click to expand...
Click to collapse
This should get you going now. http://forum.xda-developers.com/showthread.php?p=54912191
engine95 said:
This should get you going now. http://forum.xda-developers.com/showthread.php?p=54912191
Click to expand...
Click to collapse
Thanks I will re download from these and try again.
chelstromj said:
Thanks I will re download from these and try again.
Click to expand...
Click to collapse
You don't need to dl the .tot. Just maybe the generic .dll. Although the regular one should work.
Mainly it's just ticking "board dl that's different.
engine95 said:
You don't need to dl the .tot. Just maybe the generic .dll. Although the regular one should work.
Mainly it's just ticking "board dl that's different.
Click to expand...
Click to collapse
Looks like click the box for board dl worked. I'll update after I play with it a bit. Thanks all.
Still problems
I'm getting to different crash screens now. A green one that say Demigod crash handler:tz and a black screen about a kernal crash. Any ideas on these issues?
You got it yesterday, just take it back and get a new one.
Sent from my LGLS990 using Tapatalk
chelstromj said:
I'm getting to different crash screens now. A green one that say Demigod crash handler:tz and a black screen about a kernal crash. Any ideas on these issues?
Click to expand...
Click to collapse
Both those screens are kernel issues. They were common with the granddad of this phone... Optimus G.
You should just reboot and be good. If not, then maybe you need to run Flashtool again.
I'm not a fan of Flashtool. But I guess our other option, LGNPST, isn't an option anymore.
Other than that, maybe go with the above post.
engine95 said:
Both those screens are kernel issues. They were common with the granddad of this phone... Optimus G.
You should just reboot and be good. If not, then maybe you need to run Flashtool again.
I'm not a fan of Flashtool. But I guess our other option, LGNPST, isn't an option anymore.
Other than that, maybe go with the above post.
Click to expand...
Click to collapse
Lg and sprint are telling me they will not take it back without proof of purchase. I bought it off a local person. Their upgrade that they wanted cash for instead of using. It was sealed supposedly unused. Sprint store said that the demigod one means its been rooted and can not help me. I am very frustrated and know just enough about this stuff to only get in trouble.
Is there more i can Flash? Or more Software I can replace to get rid of the issue. As I have flashed tot file and dll file 30 or so times. With no better result. I don't want a $500 paper weight. Thanks for all the help so far.
Maybe try flash tool with a different pc. My laptop works great but my other pc doesn't work as well. Worth a shot.
chelstromj said:
Lg and sprint are telling me they will not take it back without proof of purchase. I bought it off a local person. Their upgrade that they wanted cash for instead of using. It was sealed supposedly unused. Sprint store said that the demigod one means its been rooted and can not help me. I am very frustrated and know just enough about this stuff to only get in trouble.
Is there more i can Flash? Or more Software I can replace to get rid of the issue. As I have flashed tot file and dll file 30 or so times. With no better result. I don't want a $500 paper weight. Thanks for all the help so far.
Click to expand...
Click to collapse
The Demigod happens even when not rooted if I remember right. I think Sprint was just being lazy.
Go to that thread I linked earlier by fergie, and grab both dll's. Generic and Sprint.
I know you don't want to do it again but it's your only way to hopefully get it working.
I'll see if I can get an md5sum for the tot to make sure you have it right. I'll post it here in a minute.
Edit: md5sum for LS990ZV4_04.51101.tot - 8cee4b3dd55ec6405d03805bc1061459
I know its worked for me a few times. And both dll's should work just fine.
engine95 said:
The Demigod happens even when not rooted if I remember right. I think Sprint was just being lazy.
Go to that thread I linked earlier by fergie, and grab both dll's. Generic and Sprint.
I know you don't want to do it again but it's your only way to hopefully get it working.
I'll see if I can get an md5sum for the tot to make sure you have it right. I'll post it here in a minute.
Edit: md5sum for LS990ZV4_04.51101.tot - 8cee4b3dd55ec6405d03805bc1061459
I know its worked for me a few times. And both dll's should work just fine.
Click to expand...
Click to collapse
What would the generic dll do if I have not modified anything?
chelstromj said:
What would the generic dll do if I have not modified anything?
Click to expand...
Click to collapse
I've used both and had no issues with either one.
Depending how they unlock the bootloader, I think we'll all end up having to use the generic.
same issue
Hello did you ever get it fixed ? i have the exact same problem. I was able to talk to lg today and im going to send it in for service . They said they dont need proof of purchase since the phone is only a couple of months old so its still under warranty please let me know if you have any info that can help me before i send it in.
i have a lg optimus l90 and i took my battery out for literally 1 minute and then put in back in and started charging it. it turned back on with a black screen saying "firmware update do not unplug the USB connection until the process is complete" its been like this for about 5minutes now and its still at 0%. can someone please tell me what to do? help!
Hello,
So this happened today when I was planning to ship my phone to my cousin. To send the phone through air service I had to drain battery (weird rule in my country) if its an inbuilt battery hence I tried a never before method and used a Battery Drain app from Google Play.
Now after raining battery by 20% and phone turning super duper hot, I decided to uninstall the app and so I did and formatted the phone. This is the point from where things went downhill...after the phone restarted, "Home" touch key stopped working and I started getting error about "Lock Screen crashed" and wifi is stuck at "turning on" and *#06# shows up blank.
I tried rebooting and formatting it multiple times with no success.
Also tried Vol + power and tried every possible option from there with no success.
Did anyone here had a similar experience? If yes how did you resolve it?
And now the phone is in an infinite restart loop and stops only if I put it up for charging and when removed it goes back to restarting.
chaztin said:
And now the phone is in an infinite restart loop and stops only if I put it up for charging and when removed it goes back to restarting.
Click to expand...
Click to collapse
Entering recovery and again 'factory reset' doesn't solve problem?
I'd like to flash whole phone with qpst.
Phone is CHN or ROW? Be careful never flash ROW rom to CHN phone and CHN rom into ROW phone.
slavislavi said:
Entering recovery and again 'factory reset' doesn't solve problem?
I'd like to flash whole phone with qpst.
Phone is CHN or ROW? Be careful never flash ROW rom to CHN phone and CHN rom into ROW phone.
Click to expand...
Click to collapse
I haven't tried that yet as I couldn't find proper ROM and procedure for it after looking for it online. Its easier to find the same for Samsung phones.
Its a ROW (K920_ROW_S133_141010).
I don't have too, but you can downgrade, then upgrade to newest
K920_ROW_S126_140825
K920_ROW_S137_141029
slavislavi said:
I don't have too, but you can downgrade, then upgrade to newest
Click to expand...
Click to collapse
'Thanks a lot , I will try that.
Any progress? Success?
slavislavi said:
Any progress? Success?
Click to expand...
Click to collapse
Hello,
No actually not. I had to submit the phone to Lenovo service center.
Apparently even they couldn't figure out the exact issue with the phone and they raised the request to their counter part on international level.
Hopefully I should hear back from them soon.
Hello guys,
I am searching for help, my elephone g6 does not start, rebooted it yesterday and it did not started ever again, not even in recovery mode, i tryed to flash stock rom but can't get him recognised by my computer, the omputer is always playing the sound connect->disconnect->connect->disconnect, within 30 seconds space more or less. i have no idea what to do more, anyone knws the problem and a possible solution?
cheers
thanks in advance.
Try looking up some recovery software from the manufacturer like HTC does. Otherwise is a little to vague.
scottbear said:
Try looking up some recovery software from the manufacturer like HTC does. Otherwise is a little to vague.
Click to expand...
Click to collapse
So, i got my phone to connect to the computer, but the SP flash tools goes to 100% red bar and doesn't do anything more, i am doing everything correctly but it just gets stuck 100% red bar and don't move it has ben like 30+ minutes and nothing, any tip on that?
cheers
n3las said:
So, i got my phone to connect to the computer, but the SP flash tools goes to 100% red bar and doesn't do anything more, i am doing everything correctly but it just gets stuck 100% red bar and don't move it has ben like 30+ minutes and nothing, any tip on that?
cheers
Click to expand...
Click to collapse
No clue. Have you tried flashing a recovery?
scottbear said:
No clue. Have you tried flashing a recovery?
Click to expand...
Click to collapse
hello again, yes i tryed and that's my problem, my SPflashtools just get stuck with a 100% progreress red bar and does not move on, i have done everything correctly, exact stock rom, drivers and so.
n3las said:
Hello guys,
I am searching for help, my elephone g6 does not start, rebooted it yesterday and it did not started ever again, not even in recovery mode, i tryed to flash stock rom but can't get him recognised by my computer, the omputer is always playing the sound connect->disconnect->connect->disconnect, within 30 seconds space more or less. i have no idea what to do more, anyone knws the problem and a possible solution?
cheers
thanks in advance.
Click to expand...
Click to collapse
I have the same problem :crying:
Does someone know what to do?
The Galaxy S6 Edge SM-G925V for Verizon turns on but it shuts down by itself exactly after 1 minute and 10 seconds and it would stay off. However, if the phone is connected to a USB charger, the phone would do the exact same thing but instead of staying off, the phone will turn on by itself and shut down after exactly the same time over and over. I already tried flashing compatible firmware but nothing changed. Could anybody help??
Does anybody have any ideas please???
Guys Help please!! Any ideas?
GalaxyVibe said:
The Galaxy S6 Edge SM-G925V for Verizon turns on but it shuts down by itself exactly after 1 minute and 10 seconds and it would stay off. However, if the phone is connected to a USB charger, the phone would do the exact same thing but instead of staying off, the phone will turn on by itself and shut down after exactly the same time over and over. I already tried flashing compatible firmware but nothing changed. Could anybody help??
Click to expand...
Click to collapse
Enter recovery mode and wipe cache, reboot
Thank you for replying. I tried wipping the data Cache but nothing changed.
I am suspecting the battery could be damage. I already ordered a new battery . I will report back guys. (You know I always do )
I got the new battery today. However, the new battery did not work! Help please!!!
GalaxyVibe said:
I got the new battery today. However, the new battery did not work! Help please!!!
Click to expand...
Click to collapse
So u r telling it happens only when its connected to a cable?
And how about installing recovery, cleaning system and then installing the rom again?
BatDroid said:
So u r telling it happens only when its connected to a cable?
And how about installing recovery, cleaning system and then installing the rom again?
Click to expand...
Click to collapse
When the USB cable is on or not, it is the same result. I tried unplugging the USB port from the motherboard inside the phone and i get the same results.
Recovery works fine. I also tried flashing the phone with the last software. I even tried the Verizon software assistance. Same results.
GalaxyVibe said:
When the USB cable is on or not, it is the same result. I tried unplugging the USB port from the motherboard inside the phone and i get the same results.
Recovery works fine. I also tried flashing the phone with the last software. I even tried the Verizon software assistance. Same results.
Click to expand...
Click to collapse
Did u make a clean install by wiping whole system, boot?
BatDroid said:
So u r telling it happens only when its connected to a cable?
And how about installing recovery, cleaning system and then installing the rom again?
Click to expand...
Click to collapse
BatDroid said:
Did u make a clean install by wiping whole system, boot?
Click to expand...
Click to collapse
Yes I did but i am getting the same problem even after changing the battery. I wipped the cache and also a factory reset in recovery mode.