Hi,
I try to flush the clockworkmod recovery (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.1-p3.img) to mine Galaxy Tab 10.1v p3.
result:
Code:
sudo fastboot flash recovery recovery-clockwork-6.0.3.1-p3.img
sending 'recovery' (4844 KB)...
FAILED (command write failed (Bad file descriptor))
finished. total time: 0.000s
on the tab screen:
Code:
Fastboot USB download protocol
Bootloader Version : P7100BUKC8
Baseband Version: 228_DB120709
Serialnumber: 288414943F597
Lock State : UNLOCKED
FAIL
Failed to process command getvar : partition-type : recovery error (0x2)
Any Ideas?
Friendly regrades
Kai
Related
Also i get bootloop
My phone rooted with Kingoroot - sorry for advertisement
ANDROID VERSION 4.2.2 Jelly bean
This is code from CMD
Code:
fastboot flash recovery recovery.img
Code:
C:\Users\windows\Desktop\ADB & Fastboot Toolkit>fastboot flash recovery twrp.img
sending 'recovery' (10368 KB)...
OKAY [ 0.307s]
writing 'recovery'...
FAILED (remote:
partition 'recovery' not support flash)
finished. total time: 0.328s
C:\Users\windows\Desktop\ADB & Fastboot Toolkit>
What to do now? plz i need get the answer.
Code:
C:\Users\windows\Desktop\ADB & Fastboot Toolkit>adb reboot bootloader
adb server is out of date. killing...
* daemon started successfully *
C:\Users\windows\Desktop\ADB & Fastboot Toolkit>fastboot oem unlock
...
(AND ALL THE TIME ...)
Hi everyone.
I had a working Lineage OS 14.1 installed on my yureka device.
I got the newer version TWRP and instead of going to install the latest update from COMMAND PROMPT , i used FLASFHFIRE and this corrupted my device.
My phone when switched OFF shows the battery indications of charging, when connected to charger.
But, doesn't start when switched ON and when connected to laptop, shows the YU logo and goes into FASTBOOT mode.
Code:
$ fastboot devices & $ fastboot -i 0x1ebf devices
detects the phone and gives this
4a252f6 fastboot
Click to expand...
Click to collapse
But, any other FASTBOOT command to flash the boot or recovery fails with error , for the first run
Error 1 :
Code:
D:\RootingKit\platform-tools>fastboot flash boot 15_April_2018_Boot.img
target reported max download size of 268435456 bytes
sending 'boot' (20480 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 5.001s
And successive runs shows a different error
Error 2:
Code:
D:\RootingKit\platform-tools>fastboot flash boot 15_April_2018_Boot.img
target didn't report max-download-size
sending 'boot' (20480 KB)...
FAILED (command write failed (No error))
finished. total time: 0.000s
Now, when i remove the cable and connect it back then again the first error message is observed.
I have tried all cables from different phones, samsung xperia yureka and others and not able to flash. Also, i have tried on different USB ports of my laptop and no SUCCESS.
Please help me out here.
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
IDeeJay91 said:
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20-lite/help/solution-nova-3e-p20-lites-brock-bolt-t3816608 my Solution
César Terrazas said:
https://forum.xda-developers.com/huawei-p20-lite/help/solution-nova-3e-p20-lites-brock-bolt-t3816608 my Solution
Click to expand...
Click to collapse
i cant used this method becouse i had FRP locked and i cant flash anything...
IDeeJay91 said:
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
Click to expand...
Click to collapse
I've the same problem if you get the solution please inform me as well
Thanks
IDeeJay91 said:
i cant used this method becouse i had FRP locked and i cant flash anything...
Click to expand...
Click to collapse
Watch a YouTube tutorial to umlock FRP
Hello everybody,
I own a Lenovo k5 pro phone (L38041).
I've unlocked bootloader yesterday with this method, then I flashed via twrp zui 11 with android pie, prerequisite to install havoc 2.9. That overwrited twrp with stock recovery, so I tried to flash twrp again via fastboot but it got stuck sending.
See here, when prompted «FAILED (Status read failed (No such device))» is because I reboot phone bootloader after a long wait sending.
Code:
$ adb version
Android Debug Bridge version 1.0.41
Version 29.0.4-1
Installed as /usr/bin/adb
$ fastboot --version
fastboot version 29.0.4-1
Installed as /usr/bin/fastboot
$ fastboot devices
4488d6fc fastboot
$ fastboot flash recovery recovery-TWRP-3.2.3-0225-LENOVO_K5PRO-CN-wzsx150.img
Sending 'recovery' (55144 KB) FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot -w
Finished. Total time: 0.002s
$ fastboot flash recovery recovery-TWRP-3.2.3-0225-LENOVO_K5PRO-CN-wzsx150.img
Sending 'recovery' (55144 KB) FAILED (Status read failed (No such device))
fastboot: error: Command failed
$ fastboot -w
Erasing 'userdata' FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot flash recovery recovery-TWRP-3.2.3-0225-LENOVO_K5PRO-CN-wzsx150.img
Sending 'recovery' (55144 KB) FAILED (Status read failed (No such device))
fastboot: error: Command failed
$ fastboot -w
Erasing 'userdata' FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot -w
Finished. Total time: 0.002s
$ fastboot -w
Erasing 'cache' FAILED (remote: 'Check device console.')
fastboot: error: Command failed
$ fastboot getvar all
getvar:all FAILED (remote: 'unknown command')
Finished. Total time: 0.001s
$ fastboot getvar all
getvar:all FAILED (remote: 'GetVar Variable Not found')
Finished. Total time: 0.001s
$ fastboot getvar all
getvar:all FAILED (remote: 'GetVar Variable Not found')
Finished. Total time: 0.001s
$ fastboot -w
Finished. Total time: 0.001s
$ fastboot flash unlock sn.img
Sending 'unlock' (8 KB) FAILED (Status read failed (No such device))
fastboot: error: Command failed
$ fastboot -w
Erasing 'userdata' FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot -w
Finished. Total time: 0.001s
Bootloader info:
Fastboot mode (secure)
Product: kunlun
Variant: SDM EMMC
SN: 4488d6fc
Device state: unlocked
In develorper options it shows as unlocked too.
Last thing, I've pushed some files via adb while system is on, (debugging mode on).
Thank you.
Today I've updated adb and fastboot to 29.0.4-2 with same result.
Some other commands I've tried (notice it fails when I restart fastboot at device some time after wait):
Code:
$ fastboot devices
4488d6fc fastboot
$ fastboot boot recovery-TWRP-3.2.3-0225-LENOVO_K5PRO-CN-wzsx150.img
Sending 'boot.img' (55141 KB) FAILED (Status read failed (No such device))
fastboot: error: Command failed
$ fastboot oem unlock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
$ fastboot oem lock
FAILED (remote: 'unknown command')
fastboot: error: Command failed
Any help?
I'ts solved.
I've used different computer and different cable, it was as easy.
Hi folks,
I´ve an Xiaomi Poco F1 with an unlocked bootloader. Usb debugging is enabled and no password is set. If I run
HTML:
fastboot flash recovery twrp.img
the error
HTML:
Sending 'recovery' (31000 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
appers. Any ideas why this happens?
Count_Omega said:
Hi folks,
I´ve an Xiaomi Poco F1 with an unlocked bootloader. Usb debugging is enabled and no password is set. If I run
HTML:
fastboot flash recovery twrp.img
the error
HTML:
Sending 'recovery' (31000 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
appers. Any ideas why this happens?
Click to expand...
Click to collapse
Under linux, I get a success
HTML:
target reported max download size of 536870912 bytes
sending 'recovery' (6 KB)...
OKAY [ 0.010s]
writing 'recovery'...
OKAY [ 0.003s]
finished. total time: 0.013s
and
HTML:
fastboot boot twrp.img
creating boot image...
creating boot image - 10240 bytes
downloading 'boot.img'...
OKAY [ 0.008s]
booting...
OKAY [ 0.051s]
finished. total time: 0.059s
runs along. But it doesn´t get through to the twrp screen.
some weeks ago i read on forum that miui10.0.3 or 4 has some fastboot errors,
for example if you have flashed miui10.0.3 or 10.0.4 and then try to write recovery it will give error in fastboot
i would suggest flash miui10.0.1 or earlier via miuiflasher fastboot rom and then try!