Related
So I have set my power saving mode to come on at 30% and for it to disable everything except wifi. The problem is that after I charge my phone back up, those settings remain disabled even though power saving mode is turned off, so I have to manually enable them each time. Is there a way around this?
apollero said:
So I have set my power saving mode to come on at 30% and for it to disable everything except wifi. The problem is that after I charge my phone back up, those settings remain disabled even though power saving mode is turned off, so I have to manually enable them each time. Is there a way around this?
Click to expand...
Click to collapse
What ROM and kernel is on your phone?
If you enable user specified power saving with your customized settings (30% battery => shut down everything accept wifi), and you did not disable this power saving mode, when exactly is the power saving mode disabled?
As soon as you plug in the power cable?
And is it not re-enabled automatically, after pulling the power cable out?
Sorry, but I did not exactly understand your issue.
"those settings remain disabled even though power saving mode is turned off" => Yes, that's correct. If the power saving mode is turned off, all power saving settings should be disabled.
This sounds to me like "normal" behavior.
Maybe I misunderstood something in your description.
It_ler said:
What ROM and kernel is on your phone?
If you enable user specified power saving with your customized settings (30% battery => shut down everything accept wifi), and you did not disable this power saving mode, when exactly is the power saving mode disabled?
As soon as you plug in the power cable?
And is it not re-enabled automatically, after pulling the power cable out?
Sorry, but I did not exactly understand your issue.
"those settings remain disabled even though power saving mode is turned off" => Yes, that's correct. If the power saving mode is turned off, all power saving settings should be disabled.
This sounds to me like "normal" behavior.
Maybe I misunderstood something in your description.
Click to expand...
Click to collapse
I'm on stock 2.3.3 and KG2
And I meant that these settings do not revert themselves after I finish charging the battery. For example, at less than 30%, my power saving mode turns off syncing. But once I finish charging my phone back to 100%, the syncing is remained off, so essentially, my power saving mode never really turns itself off even after charging.
I noticed the same thing - it's very annoying to set my screen timeout to 2 minutes, and when power-save mode comes on, it gets reset to 30 seconds and stays there.
I ended up turning off almost all of the power-saving features, and setting the threshold to 5%. I'm running the stock rooted kernel with NoCIQ, so I already have a pretty substantial battery life (~24-30 hrs with normal usage and wifi at home).
apollero said:
I'm on stock 2.3.3 and KG2
And I meant that these settings do not revert themselves after I finish charging the battery. For example, at less than 30%, my power saving mode turns off syncing. But once I finish charging my phone back to 100%, the syncing is remained off, so essentially, my power saving mode never really turns itself off even after charging.
Click to expand...
Click to collapse
Have a look at MyProfiles app from the Market.
Maybe it can help you to switch between different profiles based on system triggers.
Or use AutomateIt app to define rules when to toggle wifi, bt, gps, etc.
Just worth a try...
Sent from my GT-I9100 using XDA App
It_ler said:
Have a look at MyProfiles app from the Market.
Maybe it can help you to switch between different profiles based on system triggers.
Or use AutomateIt app to define rules when to toggle wifi, bt, gps, etc.
Just worth a try...
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thanks for the suggestion, but I kinda want to get to the root of the problem here as opposed to installing an app to mask it. Does anyone else know what's wrong with my phone?
There's nothing wrong, that's just the way it works, it change your setting when activates but doesn't change them back.
I no longer use it, since I have GPS/wifi/BT disabled unless I use them anyway.
So after some research and Googling, I discovered that "Killling" your app is only worse or has no effect for your battery life. Even using apps that "save" battery only harm it even more. I've been told these were the fundamental things to save battery ever since I even got my hands on a smart phone.. Guess I've been asking the wrong people.
So, what are real ways to save battery? I'm a heavy phone user, often surfing the net or watching Netflix on the go. Dimming my screen is not enough, are there any other techniques to prevent my phone from dying? I've got an Android 4.
If you're rooted:
Underclock
Undervolt
Change cpu governor/io scheduler
Flash different ROMS and kernels
Change your modem
And a few more.
Not rooted:
Use screen filter? Lol.
Update your firmware
Sent from my GT-I9100 using XDA
okmijnlp said:
If you're rooted:
Underclock
Undervolt
Change cpu governor/io scheduler
Flash different ROMS and kernels
Change your modem
And a few more.
Not rooted:
Use screen filter? Lol.
Update your firmware
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I am rooted, thank you for the info! I'll be looking into it~
Get bigger battery?
Turn thing off lol only kidding but turn off auto updates such as news etc
If you look at your battery stats, under settings, you'll see what uses the most battery. Usually I find that my screen uses around 70% of my battery, but if you have something else high on the list you might have a "rogue app" preventing your phone from going into sleep mode.
If your screen is the culprit you can only save 10% or so by throttling your CPU etc. The only way you can make real savings is by reducing screen brightness.
Easiest way to save battery is use gemini app manager to stop apps being able to autostart when you don't want them to as then you don't have the os having to kill off unused apps to make more free ram.
For example a lot of apps can autostart when your wifi goes on or off, when your 3G signal drops etcetera including things like facebook or google play. By changing auto start for such apps you don't have to run a task killer which also saves battery.
Dave
Sent from my LG P920 using Tapatalk
i use the aokp rom milestone 4 atm, and i also have come accross a fantastic battery app called "Badass Battery Monitor". its free and details very very specifically what apps are using the battery most.
I have managed to increase my battery by rooting out the apps i dont use that are using prescious power...
Also, turning off useless app permissions for apps theat really dont need them and work perfectly well without them will also save on power massively. for this i use "LBE Privacy Guard" works an absolute charm
I have widget where I can turn off Internet connection, set brightness, GPS etc. Internet stand-by mode uses damn much battery... And when you don't use Internet, you can put on 2G, it also saves battery.
This may not benefit you if you are a heavy user but I find the feature on my Droid 3 that turns off 3G after 15 minutes of inactivity saves battery and also saves data. Not sure if this is a standard Android feature or if it would even benefit you.
Here with LG P990 and I don't have option to turn off 3G aftre some minutes... but if/when you didn't need high speed you can choose only 2G network (for example when needed receive only notification): this save a lot your battery.
Moreover you can verify battery consumption to see if there are autostart apps from your vendor than have heavy power consumption (for me there was OnScreenPhone) and use gemini app manager as explained previously.
In the end you can find out custom ROM for your device usually optimized for smoothness and power consumption.
First apps I download when switching to a new Rom to get a little control on battery are
Adfree- Get rid of ads, they eat a bit of battery.
DroidWall- Control what apps are able to access Internet under separate "Mobile Data" and "Wifi" Conditions.
Screenfilter- Dim the screen below factory settings.
LED's hack- Turn off the Softbutton Backlights (home/menu/back/search), even though they don't seem like it may eat up your battery, it is an extra 'light' that's on, even though it may be minimal, it's still drawing power.
Also, It maybe just a Photon thing cuz of the Pentile display but I always use if not completely Black background image, a dark one because the 'lighter' or 'whiter/colorful' images take more battery, same reason I always look for 'Inverted' or black themed apps too.
Turn OFF any 'Haptic feedback' settings on your phone (Keyboard, Phone DialPad, Screen/UI Interactions, etc..)
For Calls (Ringtone) and Notification settings, don't have them set to 'Ring and Vibrate' or just 'Vibrate' because the Vibration Mechanism will eat alot if battery. Some may argue that the Notification 'Vibrate' setting and even the Haptic feedback (which does in fact use the phones Vibration mechanism) would not kill battery because it's a 'quick' or 'minimal' use (depending on use) and but if your keyboard had the Haptic feedback on, thinking of how many times your touch the keyboard for even on Text message, try will add up and help kill the battery.
Turn OFF any/all Homescreen/UI Animations
Turn OFF any Auto Sync setting and instead have APPS sync in a specified interval, (Of course Depending on how important the information that's being pulled like Email) , Could be set to like every 4 hours to sync an so on.
Manually input Date/Time settings instead of "Get network provided values" because it'll be one less thing pulling from Internet.
Set Screen Timeout to 30 Secs and Never have Auto-Brightness set, instead use a brightness toggle of some sort (Stock 'Power Control' Widget works well) to only have it as bright as you need to view in current conditions.
Open the Google 'Talk' application and uncheck the 'Auto log-in' setting, and then 'Sign out'. For some reason this always runs in the background and eats alot of battery.
If I think of more things ill post them
Hope these tips help, if they do don't forget to hit the thanks button thanks.
MoPhoACTV Initiative
There are many ways...
Switch on WiFi, 3G at only using, and close the not using application, decrease display brightness etc...
And if you root your phone, you may change CPU governor, or build.prop tweaks, script tweaks... Or change to custom kernel or custom ROM.
I forgot that 'LED's hack' is not available in the market anymore, I attached it below.
i hv just downloaded screen-filter lets c how that works...
Juice defender
Try JuiceDefender by Latedroid. It helps a lot to turn off things you don't need when you don't need them. Sorry I can't post the link- I'm new to XDA
my experience:
undervolting does not help much. you have to test a lot for only a little bit of improvement.
in my opinion you will not really remark it.
but what helps, i think, is set cpu speed, if possible. for example i use samsung galaxy s2 where cpu has max 1200mhz. i set max cpu freq to 800mhz. with a good rom (hydrogenics f.e.) android keeps running smooth with 800mhz and battery lasts noticeable longer.
I agree that undervolting doesn't help so much.
Like in up post, best thing to save Your battery is to change cpu power. You can also use diffrent cpu govenor : good for battery are smartassv2 and power save. Just need to have rooted phone and download app, fx. Antutu CPU Master or Set CPU. U can also make your cpu speed profiles.
Think I have a solution for short battery life for Nook! (Really for any android device)
The problem has been that the Nook Tablet does not go to a Deep sleep (even if they say its fixed its not). Every night I have to charge the Nook battery because it goes from 100% to 90% overnight. If the Nook sits all day with no use the battery will drop to 85%. Almost a 20% decrease in power in one day of no use. By the second day battery is down to 50% and forget it if I use the Nook.
This app seems to solve the problem!
I downloaded a free app (Google App store) called “CPU Tuner (rooted phones)” you need to be rooted but for most of us here this is not an issue.
This app allows you setup CPU speed, WiFi and other settings for different states the Nook may be in.You can setup several triggers but I only used 1. The problem is not just having the Nook go into Deep Sleep but to turn off other functions that hit the battery e.g. WiFi and sync. With this app you are able to tell the Nook to go into Airplane mode as well as turning off all other features that may consume battery life. Below is my setup and findings.
State 1: “On Power (Plugged in)” WiFi on, Sync on, airplane mode off and CPU set to 1020mhz Governor set to interactive
State 2: “On Battery” WiFi on, Sync on, airplane mode off and CPU set to 1020mhz Governor set to interactive (same as above)
State 3: “Screen off” WiFi off, Sync off, airplane mode on and CPU 600mhz Governor set to conservative
State 4: “Screen Lock” WiFi off, Sync off, airplane mode on and CPU 600mhz Governor set to conservative (Same as above)
With these settings (and having 3 nooks with CM10 to test) here are my numbers
test stared around 10pm
Nook 1 started with 76% batt (CPU Tuner not installed)
Nook 2 started with 85% batt (CPU Tuner not installed)
Nook 3 started with 90% batt (CPU Tuner installed)
checked battery life at 8am next morning.
Nook 1 65% batt
Nook 2 75% batt
Nook 3 91% batt (Yes it went up 1%)
Later in the day with no use 8pm still 91%
Loaded CPU Tuner on all three Nooks started test at 10pm. (Day 2)
Nook 1 started at 96%
Nook 2 started at 74%
Nook 3 started at 83%
Checked battery life at 8am next morning.
Nook 1 ended at 96%
Nook 2 ended at 75%
Nook 3 ended at 83%
As you can see this is a big difference then losing 20% power overnight. Since I have Screen Off and Screen Lock as the same trigger I don’t lose power if I am just checking batt level or the time.
This is a MUST HAVE APP. easy to setup and makes a big difference.
You can also setup it up so that if you are on the battery the CPU is at 1008mhz which will save battery life while in use and when plugged in CPU can go to 1020mhz giving you full power.
Sorry for such a long post but I felt it was good info for the users.
Webmaven
webmaven said:
Think I have a solution for short battery life for Nook! (Really for any android device)
Click to expand...
Click to collapse
Terrific recommendation. Was easy to set up and works like a charm. No more finding my Nook with a flat battery after ignoring it for a couple of days.
Gracias! :good:
Thank you for the tip! I will make a note of it so I can use it if/when I need it! It seems very handy to be able to set upp different user schemes!
However, I do not agree with this comment:
webmaven said:
The problem has been that the Nook Tablet does not go to a Deep sleep (even if they say its fixed its not).
Click to expand...
Click to collapse
I do know it's a problem in some ROMs, and often a problem along the way during development. I think it's grocely unfair to suggest it's a general problem though.
I'm running a CM10 build from 1231 and I have not problems what-so-ever with battery life! I hardly loose anything while on standby (wifi off). I do turn it off manually, and I understand that with this app I can have it done automatically which is very neat, so might use it because of that. The processor speed adjustments works just fine anyway in the ROM i use.
It's great to know this thing exists and does work if I want to try a "work in progress" ROM more extensively. So once again :good:
The "battery-drain while asleep" problem got fixed since early December (e.g., Succulent's v12/08 build).
Also, I simply turn off WiFi (using a WiFi on/off widget) when I am not accessing Internet, and my NT's battery consumption while asleep has been well below 1% a day (comparable to that of my Google N7).
Finally, for those who are interested in battery consumption management tools, I find Battery Juice Defender (which I use on my Samsung GS-II phone) reasonably effective yet easy to use.
Sorry it was not meant to be a dig or insult!!!
I love ALL of the work that the developers have done and I think I have changed my ROM about a half a dozen times because I can't figure out which one I like best. But compared to my wife's Nook with just the B&N ROM her battery could last days where my battery only lasted 1 day.
Please; I did not mean anything insulting with the comment and the fact that these developers can put together such solid ROMs is saying something about their skills.
How I found this App was from posts here where users were saying that they had to turn off WiFi. Trying to make a WA or KA (WA = Wife Approved and KA = Kid Approved) I know that going in and turning on and off WiFi was never going to happen.
When installed the CPU Tuner and found that it was going to do this automatically and on top of this battery life goes from 1 day to several days I had to make a comment. Only after a few days of my kids using the Nook with the CPU Tuner they made comments about how long the battery lasted. Using these ROMs and CPU Tuner made the Nook 100% WA & KA and now wife is using Nook with the Hashcode ROM and I have heard no complaints. Happy wife, happy life.
Again sorry
Can you post screenshots of your settings from the start, there are some things in your OP that i can't get to setup for testing purposes, indeed the battery of my nook using @succulents ROM 4.1.2 final drains battery considerably while sleeping.
~ V
CPU Tuner Screen Shots
lavero.burgos said:
Can you post screenshots of your settings from the start, there are some things in your OP that i can't get to setup for testing purposes, indeed the battery of my nook using @succulents ROM 4.1.2 final drains battery considerably while sleeping.
~ V
Click to expand...
Click to collapse
V;
I have uploaded the screen shots. All settings can be changed after loading so if you select the wrong item its not a problem.
I try to keep it simple, You can have more then 1 configuration but as you can see I just use 1. I set my user experience to Normal which can be changed in the settings.
Once you start CPU tuner you will see the current state of the Nook. You can select a different state. (Note the battery was at 52% which has been at 52% for about 2 days and just charged it this morning.)
Next you will see triggers; here you set what Profiles you want for different states of the Nook. Just tap in that section. I forgot to take a screen grab. But I have battery at 100, "On Battery" = Normal, "Screen Locked" = Powersave, "Screen Off" = Powersave and "On Power" = Performance. "Battery Hot" = Powersave and "Call in progress" = Performance. I really only need two profiles Performance and Powersave my Normal has the same settings as Performance and my Screen Off (which I don't use) has the same setting as Powersave.
Next are the profiles. tap the profile you want to edit. See screen shot 7-10 these images have my profile settings. I don't trust airplane mode to really shut off all that I want off so I make sure that things I want disabled are disabled and when I go into Performance I disable airplane mode and enable WiFi (Not sure what Background Sync is or if it even works on the Nook most times I keep it off especially for the "Screen Off" and "Powersave" profiles)
For the governors I leave it as interactive for "Full Speed" and "Normal" settings and conservative for "Save Battery" and Extreme Save Battery these may be the default I am not sure.
If I wanted to really go crazy. I could set my Normal CPU speed to 1008mhz to save battery life while on battery. I could also setup it up that if I have 100% battery use Performance Profile and when the battery level drops to 70% use Normal profile (with CPU at 1008mhz) and when the battery goes to 60% then create a new profile which lowers the CPU speed even more. But with my current setup I am very happy and the fact that after a few days of no use the Nook still has the same power level from when I last had it on.
That's about it. If you have any questions let me know.
Webmaven
Is there any way to delay (eg I want it to wait 5 min before turning the WiFi off)? Or should I use tasker or automateit for something like this?
Sent from my NookTablet using xda app-developers app
larrycl said:
Is there any way to delay (eg I want it to wait 5 min before turning the WiFi off)? Or should I use tasker or automateit for something like this?
Sent from my NookTablet using xda app-developers app
Click to expand...
Click to collapse
You can setup a profile where if you press the power button the CPU speed is reduced and turn off all features except WiFi. I believe that after 5 minutes (or what ever time you have set for "Sleep" I believe the default is 2 minutes) the Nook will go to sleep and all features for Sleep will take over e.g. No WiFi.
This will give you two Power options:
1. let the Nook go to sleep on its own after 5 minutes (Screen would be on during this time killing battery life)
2. Press the power button and screen turns off but WiFi is still on and after 5 minutes sleep all features off.
You can monitor what it's doing by pressing the power button and waiting about 6 minutes. Then go to the CPU Tuner log (shift pages to the left until you see the log page) What you would want to see is the following:
11:08am ALL-> Performance
11:07am All-> Powersave
11:01am All -> Screen Off
11:00am ALL-> Performance
Please note that since the time is only shown as hours and minutes it possible to see settings with the same time stamp.
Good Luck.
If you have any questions please let me know.
Fantastic, exactly what I am looking for :good:
I must say that the OP was very good, and CPU Tuner is a great app ....
but times, and apps move on.
currently I use the free "Battery Doctor" from Google Play which does what Tuner can do, but in a much user friendlier way.
my tablet only loses 1 to 2% overnight and still has 80% or so left if not used for a few days.
the developer also has a great file cleaner utility which i also use, and the Task Killer, and memory cleaner widgets you get.
in my opinion they are MUST have's, and I no longer even use the paid version of Juice defender that was my favorite app.
carkev said:
I must say that the OP was very good, and CPU Tuner is a great app ....
but times, and apps move on.
currently I use the free "Battery Doctor" from Google Play which does what Tuner can do, but in a much user friendlier way.
my tablet only loses 1 to 2% overnight and still has 80% or so left if not used for a few days.
Click to expand...
Click to collapse
I'm running CM11 Snapshot M3 and haven't been able to find a user friendly way to automatically get wifi off during sleep.
The built-in "turn off wifi during sleep" setting does not seem to be working.
Battery Doctor (Battery Saver) doesn't seem to work well on this ROM. After installing, it would seem to let me change the screen brightness (the slider would move), but then it would revert back to 20%. The app then crashed, and attempting to run it again after rebooting results in a black screen of death.
I've tried a couple other apps like WiFi Auto-Off and Advanced Battery Saver - Free, and neither succeeded in shutting off wifi during sleep.
Granted, I did not try CPU tuner with this ROM. I've tried it in the past and found it very unfriendly.
Anyone have a user friendly method to automatically get wifi off during sleep on CM11?
InUrKitchin said:
Granted, I did not try CPU tuner with this ROM. I've tried it in the past and found it very unfriendly.
Click to expand...
Click to collapse
I decided to give CPU Tuner another shot and it seems to work some of the time. I haven't been able to figure out what the difference is between the times it works and the times it doesn't.
InUrKitchin said:
I decided to give CPU Tuner another shot and it seems to work some of the time. I haven't been able to figure out what the difference is between the times it works and the times it doesn't.
Click to expand...
Click to collapse
I just use the available quick toggles in CM11 to manually (1) switch off WiFi and (2) go to sleep.
Yes, there is a quick toggle for go to sleep.
I've pretty much have gave up on ever having great battery life on my Nook. Just the nature of the beast Still a great little tablet
Since all those apps automate disable wi-fi when system sleeps and you won't get any notifications if android apps. try to poll data from internet, I just set wi-fi to automatically turn off in android wi-fi advanced menus, there is no need of any of those apps since android system can do the same thing.
Nookt Tablet goes Nuts less than 50% Battery
Currently running CM 11 snapshot 5
Whenever my nook gets below 50% battery it goes nuts. apps open themselves, then shut down, windows open, if I am watching a video it stops then begins at the beginning. Weird.
Have had this issue before and was hoping with the upgrade it would stop, but no dice.
Help?
NoEnuf4Trbl said:
Currently running CM 11 snapshot 5
Whenever my nook gets below 50% battery it goes nuts. apps open themselves, then shut down, windows open, if I am watching a video it stops then begins at the beginning. Weird.
Have had this issue before and was hoping with the upgrade it would stop, but no dice.
Help?
Click to expand...
Click to collapse
I have the same issue with my Nook Tablet. I will get to about 43% and it flips out. Apps opening, settings opening, Apps close, airplane mode comes, etc. I have to plug it back in to undo the mess and continue using it. I've had this issue with AndoidForNook's builds as well as the CM-acclaim 10.2.1 build.
Sent from my K00C using XDA Premium HD app
SonjaMichelle said:
I have the same issue with my Nook Tablet. I will get to about 43% and it flips out. Apps opening, settings opening, Apps close, airplane mode comes, etc. I have to plug it back in to undo the mess and continue using it. I've had this issue with AndoidForNook's builds as well as the CM-acclaim 10.2.1 build.
Sent from my K00C using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, glad to know it's not just me and I don't have a real "ghost in the machine". I use my Nook on the train everyday, couple times a week I have to pull out an external battery to keep it going.
Using grrenify apn +cpu tuner
Sent from my A110Q using XDA Premium 4 mobile app
Hey Folks,
I am using Stock with manually removed Bloatware. Root and Xposed are installed. My problem is the high current consumption of my Z5c. I get an average idle consumption between 200-450 ma. On my Z3c the consumption is between 50-150ma in idle state.
I tried several kernel. Stock kernel and androplus v20 - v27, in all kernel i get the same high comsumpition with interactive as governor. Brightness at the lowest and WIFI/DATA off. I use Amplify and in WLD i dont see any Problems. I dont use Facebook, only Whatsapp and GMail. Is somebody have the same problem?
Do you get same values?
Sry for my bad english
You should also check what apps are using CPU power. I had a somehow similar problem and found that some apps were pretty hungry.
I checked it already with a process monitor and the biggest cpu user is always system ui. In the battery usage stats of android, the highest usage come from display and android system.
I reflashed the .163 tft three days ago to start with a fresh installation, but the high consumption has remained.
Then maybe there's a setting that you are always making after flashing the system... Live wallpaper?
I have no other idea at the moment...
No live wallpaper or sth like that. Do anybody know the average ma consumption of Z5c?
Or is it the 810?
xanya said:
No live wallpaper or sth like that. Do anybody know the average ma consumption of Z5c?
Or is it the 810?
Click to expand...
Click to collapse
It's some of the system components or pre-shipped apps,
CM13 e.g. is able to achieve 1% per 4-8 hours or even less in idle (Airplane mode), but Stock ROM seemingly always keeps something in the phone busy,
my current suspicion is the fingerprint scanner, adaptive brightness, tap2wake, etc. - so system-side is keeping kernel-side awake, but wakelock detectors hardly show any wakelocks when most is blocked (e.g. via Amplify)
all of those work without hardly increasing battery consumption in AOSP and CM13;
so the only things left are apps and system services - or proprietary "****" that is hidden behind app-name, services and others
the Snapdragon 810 is a kind of hothead, it consumes quite a lot energy under close to full load but that doesn't explain the idle drain ...
Mine is regularly around 350 give or take a few, that might explain why I only get 4 hours of battery life ?
my widget pro(same app) says -12ma worst case while screen locked
maybe something running at the background
this phone got lot of problems
but battery is the only thing is pretty okay even without stamina
on average usage its about 2 days for me (heavy 1day)
only calls and sms (with data and wifi off even 4-10 days) android 6.0( build.185)
if the battery was li-poly it was abit better
i could solve the problem. It was the xposed module "flat style colored bars" in the current version ( from 2 May 2016; Version 2.1.0), which caused this high idle current consumption. I deinstalled also the latest "goolge play services" update. It was hard to find the guilty.
Now it is back to 100-150ma in idle state. This Thread can be closed.
Thank you for all your help.
xanya said:
i could solve the problem. It was the xposed module "flat style colored bars" in the current version ( from 2 May 2016; Version 2.1.0), which caused this high idle current consumption. I deinstalled also the latest "goolge play services" update. It was hard to find the guilty.
Now it is back to 100-150ma in idle state. This Thread can be closed.
Thank you for all your help.
Click to expand...
Click to collapse
How did you narrow it down to that app? I don't have that module installed but use xstana. That could be my problem.
First i listed the running cpu process per adb shell (root, with command top). The Sony Photo Analyzer used up to 20% of the cpu every time, so i removed it. After that, the System UI used the most of the cpu all time. I disabled all xposed modules for testing and voila the consumption was back at 100ma. So i go through the list and enabled the modules one by one and restarted it.
I am using XStana in the latest version, so it could be not the problem in your Phone.
My List of Xposed Modules:
Amplify, AppOpsXposed, Battery Home Icon, Blurred System UI (LP), BootManager, Flat Style Colored Bars (Version 2.0.1), GravityBOX (MM), Navbar music Visualizer, Prevent Running, XLED, XStana, XUIMod, YoutubeAdAway, Youtube Background Playback
So you see, i am using lot of modules, but the perfomance and battery consumption is as normal.
Hope i could help you with this information. It was very time-consuming to find the problem. You should also checkout google play services, revert back for testing to the last version if you dont find any other problem.
I know that a lot of folk use apps like Greenify, Power Nap, Amplify, Force Doze, etc along with things like Pixel Filter, Smart Pixel feature in some roms etc, but are all these really necessary with current phones?
I have used all of the above together for years but curious about if I really need to now and if they are just impacting my battery more than they save? Do I really need them all now? I'm not using ForceDoze currently as Havoc OS has it's own doze settings and aggressive profile, but I'm wondering if Power Nap is even needed if I have Greenify and Amplify.
Just trying to reduce the apps I need without compromising my standby drain as I am running into odd issues like Magisk failing to grant root after a few minutes or so uptime unless I restart the phone and quickly open the app I need to grant root (once in the allowed list, they work flawlessly. It's just the initial prompt), messages like Whatsapp/Facebook not coming through even though they are exempt from battery optimisations and whitelisted in all the above apps and fingerprint/double tap to wake not working after 10 minutes unless I hit the power button first. I feel there are conflicts going on here which I have only had since having my OnePlus 6 this month. Not an issue with my S5 with this exact setup which was running for years and all my issues are non-existent if I leave the phone stock.
I am obviously going wrong somewhere and need to figure out where.
Also, if I run pixel filter or the smart pixel feature built into Havoc OS, am I better doing that or just turning it off and lowering the brightness? Smart pixel dims the screen slightly which I have to counter by raising the brightness. That's the one thing that has me confused as to which is actually using more juice.
Just in case I am doing something wrong, I have written down what I do in order after installing a new ROM in the attempt of maximising battery life. Doesn't seem tied to Havoc OS, but to my OnePlus 6 as I never had these issue with my previous S5.
Below is after the usual TWRP, Magisk, ROM and setting up settings etc
-Install Greenify (donation package), Amplify, Power Nap, EdXposed, Riru Core, Riru Yahfa, NFS, Better Battery Stats.
-After enabling all of them in EdXposed and restarting, I fire up Greenify and turn on all Xposed features and donation features but leave smart hibernation, ignore background free and aggressive doze off.
-Greenify all games, apps I use rarely and system apps like Camera, Print Spooler and Bookmark Provider
-Open Power Nap, select Endurance mode and whitelist Magisk, EdXposed, Greenify, Tasker, Messages, Phone, WhatsApp, BBS and LastPass (Power Nap seemed to disable it's autofill service)
-Start up Amplify so it does it's checks and exit
-Set up BBS
-Remove all these apps from OS battery optimisation
-Reboot to recovery and copy over the Amplify settings file to it's folder within data/data/Amplify folder/shared prefs and restart to system. (basic Google and app specific wakelocks you will find in all Amplify guides on XDA and nothing else)
-Add Play Store, Services, Framework, Google Pay and my banking app to Magisk Hide list and EdXposed blacklist to pass SafetyNet.
And this is where my problems start happening. This is what I have done for years and I never had issues. I suppose I could do these one at a time until I hit that wall where things go wrong, but thought I would ask here in case any of you can spot the mistake. Thanks in advance for the help or roasting lol
*Edit*
If anyone has any other ideas to reduce battery drain, you can tell me. I'm trying to maximise both screen on and screen off time without compromising too much.