Related
Does anyone here use a tempered glass screen protector for their Nexus 9? I was using mine on a treadmill and dropped it on it's back thankfully but I'm weary of that happening again. Is so, which brand do you use?
nklenchik said:
Does anyone here use a tempered glass screen protector for their Nexus 9? I was using mine on a treadmill and dropped it on it's back thankfully but I'm weary of that happening again. Is so, which brand do you use?
Click to expand...
Click to collapse
I purchased my Orzyl tempered glass on amazon.
What made me choose this was the rounded edges and thinness of the screen protector and I have had previously purchased a screen protector for my HTC one X a long time ago (so I knew this company is legit).
I accidentally dropped something metallic on the edge of the protector and it didn't shatter but it left a dink. This dink eventually turned into into a cracked screen protector but the crack didnt go everywhere; it just resides on the upper half of my screen and you honestly can't feel the cracked mark. It also fits snuggly but be sure to get it straight because mine is crooked LOL.
If I were to compare tempered screen protectors, this one is definitely the better one out of all I have purchased. The one I bought for my HTC M9 was 7 bucks but it already have light scratches on it already and I can see visible lines on my screen protector as if sand was gently rubbed on it. I can't even see a scratch on the Orzyl screen protector. IMO worth the buy.
Any glass recommendations for the BLU R1 HD device?
I am looking for the same. I found some on AMZN but dont know if to bite the bullet on them.
Amazon Screen Protectors
Honestly I wasn't going to put one on, because for me it's just a cheap backup, But after one day of use I already have a few very small scratches on the top right hand corner, Gorilla Glass 3 isn't doing great and my OCD is already bothering me.
If I get scratches on the actual screen area I'll lose it lol
On Amazon their are three choices and honestly they very well may all be manufactured by the same company based on the listings
BLU R1 HD Screen Protector [Tempered Glass], Popsky 0.26MM Ultra Thin 9H Hardness High Definition HD Scratch Proof Premium Screen Protector Glass Protective Film $8.50 w/ Shipping
[2 Pack] BLU R1 HD Screen Protector, Nearpow® [Tempered Glass] Screen Protector with [9H Hardness] [Crystal Clear] [Easy Bubble-Free Installation] [Scratch Resist] $9.99 - Free Prime Shipping
BLU R1 HD Tempered Glass Screen Protetor, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness Shatterproof High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone - $8.30 with shipping
They are all 0.26MM
They all have 2.5D edges (which should match better with the 2.5d screen
They all have oleophobic coating
They all list Anti scratch/shatter/explosion.
My advice would be that if you want a backup protector and have prime go for the second one, otherwise the last one is 20 cents cheaper and most likely they are all the same screen protector just repacked by different companies which is extremely common. For a buck and some change more I'll probably go with the second one and let you know how it goes.
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
thirdlobe said:
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
Click to expand...
Click to collapse
Looking forward to your review as I'm looking at that one myself.
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Any updates on best screen protectors, no scratches yet, but i have saw a post or two about how easy this screen scratches.
The one I purchased arrived last night and I took off 6 for a .99$ plastic protector that I bought. That protector never say well so I gave the glass a try. Unfortunately the glass one sat just as poorly. Where the cut outs were for the camera and the LED the glass did not fit flush against the phone and showed as it was lifted.
I have taken both off and am just using the phone naked.
IMO
In my personal experience *most* screen protectors are created equal. My sister bought one off Amazon for 10$ and I bought one for 1.50$ on Ebay, When they arrived her's was in a fancier box but inside the boxes they had almost exactly the same contents. I tried scratching mine with a knife, and it didn't scratch (so it was glass). I'd say it is worth the risk (only 1.50 shipped in the same time as amazon one)
EvoKnvl said:
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Click to expand...
Click to collapse
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
movielover76 said:
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
Click to expand...
Click to collapse
Same, because the phone screen is not square in the sides the protector don't adhere like it's supposed too
Does anyone like the nearpow ones from amazon? I bought the box with two of them but haven't put one on yet. I'm wondering if it's even worth trying since reports so far don't seem to good. I can see where it might be more challenging to make them for a screen with rounded edges. I have two of the phones now and like them very much so am interested in protecting them.
I purchased this one:
"BLU R1 HD Tempered Glass Screen Protector, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone"
from amazon.
Does not fit cleanly.
Given all these reports I am beginning to wonder if these are even tested or manufacturers just assume it will work once cut out to size.
Sadly, i'm just joining in the bad news. I purchased the Qosea Ultra-thin 2.5D 9H Hardness Crystal Clear Scratch Resistant Tempered Glass Screen Protector for BLU R1 HD and so far it-s the same result, it doesn-t stick on the edges because of the curvature of the screen. I'm still using it because i don't want to ruin the screen so i'll be waiting for the confirmation of a tempered glass that actually fits the screen properly.
I'm a bit baffled reading all the comments here and on amazon. It truly seems like nobody tested these things. I-m starting to think there are fake commenters because each glass protector have at least one 5 star review telling about how amazingly fits. Followed by nothing but unsatisfied people.
I have had mine since release and it's still in good shape. Don't see a point in getting any protector for such a cheap phone.
Well it's not exactly tempered glass but the reviews are better as to fit. Apparently it's a hard plastic. I'm getting this phone for my kid so something needs to go on there becasue he's not exactly not clumsy.
https://www.amazon.com/dp/B01HQOTA1M/ref=psdc_2407781011_t3_B01N4DEMZY
Hello,
i just received my Nillkin 3D CP+ Max tempered glass two hours ago,
and guess what? it was damaged 10 minutes later because of my casology vault 1 case!
i wonder what should i do to protect my phone's screen from drops?
any ideas about Anything compatible with that case i should use to protect my phone?
seems like all glass protectors are the same with the cases , also other soft protector isn't designed to protect the phone against drops
what should i do?
Honestly i'm giving up!
I break 3 tempered glass screen protectors with small 0.5m drops. Reason is different from yours. Due to our edge screen, temper glass will get cracked easily.
For your case, u should look for " case friendly " screen protectors. Find those which does not cover the edges or/and full screen. Can be tempered glass, PET or healing verison.
I tried without screen protector. The conclusion is very nice screen but gorilla glass 5 is NOT scratch proof. I got some minor scratches.
In Singapore, we have plenty in physical shops, and online shops like q10sg and lazada etc. selling mobile phone accessories. So i have no links to share with you. Just search for some " case friendly " screen protectors.
Ps:
I wasted about sgd100 on screen protectors. Hahah
I gave up on tempered glass. I use spigen neo flex wet apply for now. Going for lifeproof fre when it comes out.
I basically gave up on TGSP's on these types of devices as well. Display is holding up pretty well w/ my rough handling, haven't seen any scratches yet but I'm sure it'll have some sometime down the line. Lol
Ive spent over $100 on screen protectors for the S8 (whitestone dome was $45) and not a single one has worked. The amount of money Ive paid would have paid for 9 months of Samsung Premium care and with the free month Id get 10 months of insurance which is longer than Ill have this phone. Yes Id still have to pay a $99 deductible but Id have a perfect phone in 24 hours if I break it vs no insurance and a box of useless screen protectors.
Ive been able to return all but one protector so Ive decided to focus my money on insurance and peace of mind knowing that when it breaks Ill have a new one.
Skip the screen protectors and get insurance. The headache is just not worth it. If the scratches get to the point of bothering you, start carrying the phone naked. Eventually you're going to need to file a claim.
Here's another one https://forum.xda-developers.com/galaxy-s8+/accessories/type-screen-adhseive-glass-sort-t3618285
Give this one a try. Working flawlessly on my device.
https://www.amazon.co.uk/gp/product/B06XSFTKY1/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I've just got one of those plastic screen protectors from Invisible Shield that doesn't go all the way to the edge. It does the job. Either way, with or without a protector, your phone is still vulnerable to drops.
Praetore said:
I've just got one of those plastic screen protectors from Invisible Shield that doesn't go all the way to the edge. It does the job. Either way, with or without a protector, your phone is still vulnerable to drops.
Click to expand...
Click to collapse
Second that. Using a SKINOMI case friendly one with a Spigen Slim Armour for almost 2 without issue.
Airax
Airax said:
Second that. Using a SKINOMI case friendly one with a Spigen Slim Armour for almost 2 without issue.
Airax
Click to expand...
Click to collapse
Oh yeah, I should've mentioned -- I've got a Spigen Neo Hybrid and it slips on/off without any issues and works with the protector.
I've had the same exact issue. I've bought the Spigen Ultra Hybrid case (perfect case by the way, I love it, had the same on my Nexus 6, showcases the back of the phone while protecting it just as well as the well-known neo hybrid case). I knew that the tempered glass screen protectors won't work with it well and I didn't want to waste my money on them. I looked for something different. I ended up buying the official screen protector for under $10 (you get 2 for the price) (this one, only for S8 instead of S8+: https://forum.xda-developers.com/galaxy-s8/accessories/official-samsung-s8-screen-protector-t3600373 , model number is Samsung ET-FG950CT).
I thought it might fit with the case. But when I came home, after a while I realized that this isn't gonna work. So I was deciding what to do, return the protector? But then I'd have to find another one, which might be long and expensive journey. I didn't want that.
So I grabbed my scissors and started to cut the protector carefully. There was not much I could lose. I cutted it to the point where it doesn't interfere with the case, but covers pretty much the whole display. It isn't the most elegant solution, but it works and I am satisfied with it. And I still got one screen protector to repeat the process in case this one ever gets damaged
MamomaN said:
Hello,
i just received my Nillkin 3D CP+ Max tempered glass two hours ago,
and guess what? it was damaged 10 minutes later because of my casology vault 1 case!
i wonder what should i do to protect my phone's screen from drops?
any ideas about Anything compatible with that case i should use to protect my phone?
seems like all glass protectors are the same with the cases , also other soft protector isn't designed to protect the phone against drops
what should i do?
Honestly i'm giving up!
Click to expand...
Click to collapse
The tempered glass that works for me is the Ankoon tempered glass screen protector. The screen protector just covers up to about where the edge begins to curve. In that way when you put a case on it, it doesn't rub up against it were it bends the tempered glass protector.
I have the GS8 with the Spigen Neo Hybrid case and I do not have any problems with the tempered glass screen protector lifting against the case. If you do get this tempered glass screen protector, I would advise you to get the 2-pack of this screen protector since its not that much more than the single pack and you have a spare screen protector handy to replace the current screen protector if it starts to break down.
https://www.amazon.com/Protector-Te...e=UTF8&qid=1497450827&sr=8-10&keywords=ANKoon
ericdabbs said:
The tempered glass that works for me is the Ankoon tempered glass screen protector. The screen protector just covers up to about where the edge begins to curve. In that way when you put a case on it, it doesn't rub up against it were it bends the tempered glass protector.
I have the GS8 with the Spigen Neo Hybrid case and I do not have any problems with the tempered glass screen protector lifting against the case. If you do get this tempered glass screen protector, I would advise you to get the 2-pack of this screen protector since its not that much more than the single pack and you have a spare screen protector handy to replace the current screen protector if it starts to break down.
https://www.amazon.com/Protector-Te...e=UTF8&qid=1497450827&sr=8-10&keywords=ANKoon
Click to expand...
Click to collapse
i opened the link at amazon and i saw A LOT of angry people reviewing the Protector
Same, I would only trust full adhesive ones and not ones with adhesives on the sides only.
I guess I got lucky on mine. Have the S8 Plus and have had no problems at all with my screen protector. I read up on them beforehand and read plenty of reviews and just decided to not even attempt a glass screen protector.
I ordered two kinds on Amazon. The IQ Shield liquid skin, and the Spigen Neo-flex. I put the IQ Shield on, took maybe 10 minutes, and haven't had a single issue after about a month now, all the edges are still stuck down. It's very clear and seems durable. It reminds me of a Zagg invisible shield but not nearly as "rubbery" feel. It feels like a cross between a Zagg invisible shield and a glass one. I'm still on the first one so haven't had a chance to compare it to the Spigen and I also have a spare IQ Shield.
I also ordered the Caseology coastline series slim transparent cover. Works great with the above screen protector. Like they were made for each other and it protects great. It's taken quite a few drops and at least twice has flown out of my cycling top flying down the road at 23 mph. Barely a scratch!!
MamomaN said:
i opened the link at amazon and i saw A LOT of angry people reviewing the Protector
Click to expand...
Click to collapse
Yes because they are bunch of noobs that do not know how to apply this tempered glass screen protector. Anyways it seems like with these curved screens almost all of the tempered glass screen protectors just have adhesives on the side and you stick it on.
I was like you fed up and almost just gave in to do the wet screen protectors but just the mere thought of having to spray the beautiful phone with the solution and squeegee out the excess AND not to mention that you have to wait like half a day for the thing to dry out before using it made me at least consider trying 1 more tempered glass screen protector which this one talked about having less real estate it covers to provide enough cushion to apply a case and sure it enough it worked for me. I ordered the 2 pack version which is through the link below. For some reason Amazon separated the product reviews so this one has more positive reviews but you are never going to satisfy everyone.
I guess I could post a pic to show what my phone looks like with the screen protector on and the case.
https://www.amazon.com/gp/product/B071XV2LPF/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A1GA7VZXJI5IFZ
Skinomi and IQ shield never fail me. Lifetime warranty and full skin protection for somé phones
Sent from my LEX727 using Tapatalk
There is no need to use screen protector in today's phones. I stopped in late 2015 and none of my phones got any scratches on screen (and I put them in my bag with my keys all the time). The gorilla glass 4/5 are super strong and scratch resistant.
I bought a couple from AliExpress dint work as well as needed the screen fully works but bringing the notification panel down was an issue but give the Whitestone dome protector i have a friend who uses it and says its brilliant though its pretty expensive but rather 50 bucks than getting a new screen my Opinion
Just got these in 2 days ago and it works great! They actually have the screen protector just the right width do that the case does not peel up the glass, also my old Spigen case doesn't peel it up either, just throwing that out there if you dont like the cases.
http://www.ebay.com/itm/Samsung-Gal...var=561958065030&_trksid=p2057872.m2749.l2649
Hey guys,
sorry if my english isn't perfect at all. I just received my Oneplus 5 yesterday and I already have a case, which is good for me. The thing is that screen protection is actually a headache with this phone...
The default screen protector that Oneplus has isn't bad at all, but of course is not something to use forever. So I've read the Orzly thread, the Nillkin thread, even the original Oneplus 5 tempered glass thread, and I still having doubts about what should I definetly buy. I ordered Orzly's tempered glass yesterday, but now some people are telling me that it was a bad idea since it has an "oil effect" and other faults.
So my questions are:
1 - Is the Orzly's tempered glass worthy after all?
2 - Will we have new screen protectors soon with higher quality?
Not sure if I should cancel my order
Thank you all in advance.
I bought the Orzly's tempered glass and I can say that it's worth the price.
However there are things you need to know :
1. it's very a dust magnet near the cutout.
2. there is a rainbow effect with this protection.
3. The touch screen is average...
So now I got the Nillkin tempered glass and I'm very happy with it. Of course it doesn't cover the whole screen (that is the main issue). But there is not rainbow effect. And the touch screen is way better than the Orzly's. And it feels higher in terms of quality.
Also, it's less dust magnet than the Orzly.
In my opinion, you should wait until a compagny releases a good tempered glass (I'm thinking about spigen). But in case you really need a tempered glass screen protector, take Orzly if you a tempered glass that covers the whole screen. Otherwise, take the nillkin.
PShin said:
I bought the Orzly's tempered glass and I can say that it's worth the price.
However there are things you need to know :
1. it's very a dust magnet near the cutout.
2. there is a rainbow effect with this protection.
3. The touch screen is average...
So now I got the Nillkin tempered glass and I'm very happy with it. Of course it doesn't cover the whole screen (that is the main issue). But there is not rainbow effect. And the touch screen is way better than the Orzly's. And it feels higher in terms of quality.
Also, it's less dust magnet than the Orzly.
In my opinion, you should wait until a compagny releases a good tempered glass (I'm thinking about spigen). But in case you really need a tempered glass screen protector, take Orzly if you a tempered glass that covers the whole screen. Otherwise, take the nillkin.
Click to expand...
Click to collapse
Thanks, I'll keep the order then and let's see what happens.
the orzly broke on my phone after 2 days, i still have one screen protector left. i hope it lasts longer. I actually was expecting that to happen since orzly's protector is completely flat.
the next time i need a screen protector ill get one of those plastic ones.
Mrphtn said:
the orzly broke on my phone after 2 days, i still have one screen protector left. i hope it lasts longer. I actually was expecting that to happen since orzly's protector is completely flat.
the next time i need a screen protector ill get one of those plastic ones.
Click to expand...
Click to collapse
I think that doesn't matter what screen protector you have. My girlfriend 3 years ago had the best screen protector ever and her Nexus 4 just was destroyed in a normal fall, so...
Screen protectors are only for scratches, if the fall must destroy the phone it will anyway.
The Orzly TGSP is probably the best one out there. It does have it's problems but it provides full covereage. It's the one i'm using.
I am still using my orzly tgsp because it is the best of the bunch atm. I got lucky and do not have the rainbow effect in the center of the screen, so install carefully and you might not get it either
Thank you all for your answers, I hope to receive it as soon as possible
My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
GreenDev9 said:
My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
Click to expand...
Click to collapse
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Xifar said:
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Click to expand...
Click to collapse
The one I purchased is very similar also, but has the cut-out where you can see the Sony 'logo'. Reviews are poor for those, everyone has observed the same issues as myself. I have purchased several other Tempered Glass Protectors, still waiting for them to arrive, different styles and brands to see which is the best fit with the best coverage. I will report back.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
GreenDev9 said:
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
Click to expand...
Click to collapse
Appreciate the feedback. I have just taken possession of a Muvit Tempered glass, it is clear without any borders but just the same as the rest. Everyone I have tried thus far has adhesive only on the edges, the larger portion of the screen is free to flex and move and due to that, requires a firmer press and in doing so, you hear a crisp packet like noise, a sort of crunching sound. Really annoying me now, but it is due to the curvature of the screen that we are seeing a lack of good quality glass protectors. For the Z5P I found P-Think on Amazon to be the best, yet to find any suitable candidates for the XZP.
I will order a double pack of Supershieldz soon.