I have the tablet rooted via tether. An android update came up today. Could not install it. Im guessing its due to the tethered root. So I tried to reset tablet, still no luck with android update. I then unrooted via supersu, still errors on update. I don't know how to do any future android updates. Anyone have any input/ideas? thanks
If you have rooted your tablet, and did not back up those being-modified files, then restore them, definitely the OTA update will fail.
lucian.liu said:
If you have rooted your tablet, and did not back up those being-modified files, then restore them, definitely the OTA update will fail.
Click to expand...
Click to collapse
didnt know what got modified with root so cant back up what i dont know it modifies.
bobtroy said:
didnt know what got modified with root so cant back up what i dont know it modifies.
Click to expand...
Click to collapse
You might need to find a virgin device , it seems that with some devices that ship with lollipop installed updates will fail simply if the partition has ever been mounted rw.
On those devices you have to dd the raw image back to the system partition before doing ota updates.
Not saying its what is going on with yours what's the log say?
im assuming DD has to do with Linux stuff of which I guess I better start learning. I don't have the tablet. Dell replaced it as it didn't boot up. I was lucky. If I only knew what to do a backup, what to backup and what software, etc...I would love to root it again, but Dell has already sent out 3 updates on this tablet. Once I root it, I cant install updates. It reboots to install update, then a android robot comes up on bootup with the dreaded exclamation mark/triangle, stating update failed. I did not keep a log of it. I know windows since 3.1, maybe its time to learn some Linux
Thanks for helping this newbie
:good:
bobtroy said:
im assuming DD has to do with Linux stuff of which I guess I better start learning. I don't have the tablet. Dell replaced it as it didn't boot up. I was lucky. If I only knew what to do a backup, what to backup and what software, etc...I would love to root it again, but Dell has already sent out 3 updates on this tablet. Once I root it, I cant install updates. It reboots to install update, then a android robot comes up on bootup with the dreaded exclamation mark/triangle, stating update failed. I did not keep a log of it. I know windows since 3.1, maybe its time to learn some Linux
Thanks for helping this newbie
:good:
Click to expand...
Click to collapse
I'm actually going to be updating the tethered recovery tonight the new twrp 2.8.7.0 has some features related to this issue.
social-design-concepts said:
I'm actually going to be updating the tethered recovery tonight the new twrp 2.8.7.0 has some features related to this issue.
Click to expand...
Click to collapse
Awesome...thanks Ill check it out when its up
bobtroy said:
Awesome...thanks Ill check it out when its up
Click to expand...
Click to collapse
Did the new twrp get updated/uploaded somewhere? im anxious to try it out .twrp 2.8.7.0
Related
Help.
I have a rooted Thunderbolt and I have been able to reject the update from Verizon until this afternoon when my phone started to update on its own. The update didn't go through and I got an error icon. Now my phone just goes through the same cycle of turning it self off and trying to update and crashing.
I am able to get to the Clockwork Mod recovery page but the only option that works is the 'reboot system now', which starts the phone and the whole cycle of trying to update is started.
Does anyone have an idea of how to get my phone working again?
Thanks in advance.
Mike
I'm really sorry to hear that happened, I'm not sure what you can do. Hopefully someone will be able to help you out. But at least I can tell you that you are not alone! I wasn't rooted, but my phone did autoupdate on its own at about 2:30pm today.
I posted about it here: http://forum.xda-developers.com/showthread.php?t=1234844
Pull your SDcard, wipe the pg05img.zip file, and try again. You might have to reflash clockwork.
This is the problem with running rooted stock ROMs. I know flashing a new ROM isn't what a noob wants to do, but it will avoid these very confusing headaches.
whats if you rooted using revolutionary? As far as i know there wont be that pg05img.zip file to delete.
Would you always be in danger is this if you are rooted and stay stock?
Why would someone want to root their phone and stay stock ??????
Sent from my Verizon LTE 4G Thunderbolt
loonatik78 said:
This is the problem with running rooted stock ROMs
Click to expand...
Click to collapse
Nope. One only has to keep up with the current releases, rooted versions of which come out within days of official release.
Are you sure it is the Verizon update?
I have the same behavior on my T-bolt since about 10 pst today. However, just before the phone shuts down to reboot, I see a note about a new version of Clockworkmod Recovery 4.0.1.5.
So I have been working on the assumption that it is CWM Recovery that is doing an automatic update.
I also am running rooted stock, and have not updated to latest release.
OK, it isn't the update to CWM Recovery that is the problem; it is the Verizon OTA update, which they have figured out how to force on us. I fixed my phone using the solution given by Mike later in this thread.
jbh00jh said:
Why would someone want to root their phone and stay stock ??????
Sent from my Verizon LTE 4G Thunderbolt
Click to expand...
Click to collapse
Debloating. Stock is pretty damn nice without all the extra crap.
*Madmoose* said:
Debloating. Stock is pretty damn nice without all the extra crap.
Click to expand...
Click to collapse
This, plus "root while you can" - there's no guarantee that rooting will be possible with each subsequent (unrooted) release, but you can root now and stay rooted to keep your options open. Also, getting full backups of everything is easier when rooted.
Did the fix work?
Mike, did you try what loonatik suggested? Did it work? Waiting breathlessly...
Unless I am misunderstanding the problem wiping cache from Clockwork recovery should clear out the update and it will quit trying to install it. For the future if you go to settings in the about phone or software update section (dont remeber which) there is an option to de-select scheduled update checks.
Sent from my HTC Thunderbolt
Wait.. what? Most ROMs I've seen are debloated.. At the very least they have VZW crap removed
Thanks guys for all your help and interest. I tried the solution offered by lunatic but it did not work. Thanks any way I was still looping through continuous on and off cycle. I did however did find a solution on another site. Here is the solution from Sele.
http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/2257-rs-guide-how-get-rid-ota-forced-reboots-rooted-phone.html
It was easier fix than I thought it would be. Step #1 worked.
I also did this to stop the update from happening again.
"If you are rooted use root explorer or super manager and set system to R/W. Then navigate to /system/etc/security. Find the file named otacerts.zip and rename it to otacerts.zip.bak and reboot. Should fix you up."
I'm sorry I can't remember who offered this solution to give credit to. I haven't had any updates yet but only time will tell.
Good Luck with your phone.
JBO1018 said:
Unless I am misunderstanding the problem wiping cache from Clockwork recovery should clear out the update and it will quit trying to install it. For the future if you go to settings in the about phone or software update section (dont remeber which) there is an option to de-select scheduled update checks.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
Yes you are correct wiping the cache fixed the problem.
mjkusa said:
Thanks guys for all your help and interest. I tried the solution offered by lunatic but it did not work. Thanks any way I was still looping through continuous on and off cycle. I did however did find a solution on another site. Here is the solution from Sele.
http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/2257-rs-guide-how-get-rid-ota-forced-reboots-rooted-phone.html
It was easier fix than I thought it would be. Step #1 worked.
I also did this to stop the update from happening again.
"If you are rooted use root explorer or super manager and set system to R/W. Then navigate to /system/etc/security. Find the file named otacerts.zip and rename it to otacerts.zip.bak and reboot. Should fix you up."
I'm sorry I can't remember who offered this solution to give credit to. I haven't had any updates yet but only time will tell.
Good Luck with your phone.
Click to expand...
Click to collapse
Definitely a handy resource.. Every time a new OTA comes out, this is a very frequently asked question.
I suppose you could always use an RUU too
mike.s said:
Nope. One only has to keep up with the current releases, rooted versions of which come out within days of official release.
Click to expand...
Click to collapse
Based on how many of these threads I see, that clearly isn't what's being done.
Just got to know that Pantech has released the much awaited Jelly Bean 4.1 for the Flex through OTA AT&T software update.
Like many others, I'm using the flex outside US, therefore, cannot update my flex.
Would request someone to upload the OTA JB zip file.
Can't wait to see Jelly Bean on the Flex.
PS: Check out the Pantech website for this great news
This is good news. I wish I wasn't rooted with CWMR so I could get this. Tried flashing stock recovery.img and boot.img files but get NOT SUPPORT.
Anyone know a way to get this phone back to complete stock so we can get the Jell Bean goodness?
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Tersanyus said:
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Click to expand...
Click to collapse
Can you upload the update file?
How did you unroot?
Sent from my PantechP8010 using xda app-developers app
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
---------- Post added at 01:09 PM ---------- Previous post was at 12:52 PM ----------
I knew from experience I had to go to stock recovery and unroot to update.
I flashed a stock rooted nandroid backup I had made after rooting initially.
To unroot I think I went into the SuperUser app and choose option to unroot.
Stock recovery file is posted in a thread here somewhere, had recovery.img and boot.img.
Tried flashing those in fastboot but only got NOT SUPPORT mesage.
I took a flashable zip file that had CWM recovery.img file in it and replaced it with the stock recovery.img and flashed it in CWM.
Once stock recovery was on the phone when I tried to use it I only got a little android symbol lying on its back with a red exclamation point.
Phone booted fine and worked ok
Couldn't get it to see the AT&T update until this morning.
Things I have noticed in this new Jelly Bean build for our little Flex:
Of the stock AT&T apps only 3 I could disable (ugh), why no Disable button
good news
Tersanyus said:
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
Click to expand...
Click to collapse
Basically you will find the update in the /cache folder.
I'm not sure if you you can access this folder without being rooted. You can give it a try using the ES File Explorer.
Let me know if you get the update.
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Oh that's bad!
Actually, there's another way. If you can share your system nandroid backup, maybe that can help.
Try Rooting
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Why dont you try to root with this method http://forum.xda-developers.com/showthread.php?t=1886460 ,its the same you used to root 4.0.4 I guess, should work, pull out the update and then unroot the phone as you dont want it rooted.
It happened to me, even rooted I wanst able to see /data content with ES File Blablabla, then tried with root explorer and worked fine.
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Thanks for your help
Tersanyus said:
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Click to expand...
Click to collapse
Well, thanks for the file, I'm outside US and even on stock, update notification doesn't prompt.
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Wait...
kneemeister said:
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Click to expand...
Click to collapse
I can see ATT's software updater sucks, we just can wait for our friend's upload.
Here it is: Link removed, Dropbox suspended it.
That should be a stock but rooted rom. Nothing else done to it at all. At least. I had that on the phone for a while as a backup when I was playing with roms for the flex.
Probably only going to leave this link up for a day. I'd make your own nandroid backup first. You'll probably get an md5 error in CWMR but there are instructions for fixing that around. I think it was ADB commands that had to fix it. I know the instructions for clearing the md5 error are in one of the flex rom threads, not that there were many of those. The standard disclaimer applies, if this nandroid backup bricks your phone, I can't help you.
I got the same previous session message too. Then it said no update after wiping. I think the best thing is just wipe and don't check for updates. Leave phone on, wifi on and wait for the phone to check on it's own. I got the prompt in a few hours.
Hope this helps you.
So, need to flash stock recovery after restoring nandroid correct?
Sent from my PantechP8010 using xda app-developers app
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Still waiting
Tersanyus said:
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Click to expand...
Click to collapse
Im on stock and I cant update, no root, stock recovery, Ive been waiting for the update and nothing.
I dont know if is because Im outside US
I got mine back to stock and unrooted, but the upgrade still fails at about 25% and reboots. If I clear cache and wipe, it will download again, then fail again. Even after flashing back to stock, recovery still says rooted and so does the software upload screen. But I have confirmed that I am no longer rooted. I am about to give up.
I was searching to see if anyone else was having issues, but couldn't find any. I finally decided to turn the update off for the Verizon update, but it keeps saying unsuccessful and I'm assuming because the phone is rooted at the moment. Is there a way for me to install the mk2 update?
tuningmode said:
I was searching to see if anyone else was having issues, but couldn't find any. I finally decided to turn the update off for the Verizon update, but it keeps saying unsuccessful and I'm assuming because the phone is rooted at the moment. Is there a way for me to install the mk2 update?
Click to expand...
Click to collapse
Nope, it'll install even though you're rooted, but you need to restore anything you've modified before the OTA will work - or at least any files that the OTA is trying to upgrade.
k1mu said:
Nope, it'll install even though you're rooted, but you need to restore anything you've modified before the OTA will work - or at least any files that the OTA is trying to upgrade.
Click to expand...
Click to collapse
my guess is maybe the wifi tether, I was attempting to get it to work and there was a file or something to overwrite through a script from one of the threads I was reading. Could that be it?
tuningmode said:
my guess is maybe the wifi tether, I was attempting to get it to work and there was a file or something to overwrite through a script from one of the threads I was reading. Could that be it?
Click to expand...
Click to collapse
Very likely the tether - it changes the framework, doesn't it? That's very likely to be updated by the OTA.
Yeah, i have the same issues.. When i download the update ( I'm on MJ7 Rooted) it says please install, i click okay. It reboots it goes into the recovery, tries to update but shows a Error Android image, Restarts, then displays this message saying Error Phone couldn't update nothing was effected or something like that.What's the issue?! i wanna update / root because this message for the update pops up every damn day and it's so annoying! Please help me.
Mz8691 said:
Yeah, i have the same issues.. When i download the update ( I'm on MJ7 Rooted) it says please install, i click okay. It reboots it goes into the recovery, tries to update but shows a Error Android image, Restarts, then displays this message saying Error Phone couldn't update nothing was effected or something like that.What's the issue?! i wanna update / root because this message for the update pops up every damn day and it's so annoying! Please help me.
Click to expand...
Click to collapse
Flash the MJ7 no-wipe ROM that you'll find in the Android Development forum. That will restore all of the stock files that you should need (and also cause you to lose root.)Then, update to MK2 and re-root.
I successfully rooted my LG L70 with towelroot, but I have a problem now. I can't update the software on my phone from ms32310b to ms32310c. It downloads, reboots and appears to install and says system is up to date, but it's still at ms32310b and a couple days later says I need to download the update again. Will it not update because my phone is rooted now with towelroot? Does anyone know how I can maybe force the update so I can stop getting these update notifications? Thank you!
I seem to have this same problem but my phone is the ls740
lil-g-gamegenuis said:
I seem to have this same problem but my phone is the ls740
Click to expand...
Click to collapse
I guess we have to use lg flash tool to manually flash the KDZ update file, but I'm not sure if updating will unroot the device since the new version in my case doesn't support root.
well on my phone i have CWM so i could probably find a zip to flash
bogarty said:
I successfully rooted my LG L70 with towelroot, but I have a problem now. I can't update the software on my phone from ms32310b to ms32310c. It downloads, reboots and appears to install and says system is up to date, but it's still at ms32310b and a couple days later says I need to download the update again. Will it not update because my phone is rooted now with towelroot? Does anyone know how I can maybe force the update so I can stop getting these update notifications? Thank you!
Click to expand...
Click to collapse
if you root your phone mostly you do not get ota updates and if you get one and install it you lose root
Crom4rtie said:
if you root your phone mostly you do not get ota updates and if you get one and install it you lose root
Click to expand...
Click to collapse
This is absolutely correct. I rooted my LGMS323 with Towelroot (which worked beautifully I might add) but weeks later made the terrible oversight of approving an OTA update without thinking which nuked the root. I've been stuck ever since. Once you update to MS32310c there is NO EASY WAY of rooting your device (as of yet). The only way to reroot is to start over and downgrade from (c) back to (b) or (a) by flashing the KDZ as you mentioned. Because I'm without a machine at the moment and unable to do this I'm TRULY stuck. Don't be me! Stick with what you've got!
jaydeedub said:
This is absolutely correct. I rooted my LGMS323 with Towelroot (which worked beautifully I might add) but weeks later made the terrible oversight of approving an OTA update without thinking which nuked the root. I've been stuck ever since. Once you update to MS32310c there is NO EASY WAY of rooting your device (as of yet). The only way to reroot is to start over and downgrade from (c) back to (b) or (a) by flashing the KDZ as you mentioned. Because I'm without a machine at the moment and unable to do this I'm TRULY stuck. Don't be me! Stick with what you've got!
Click to expand...
Click to collapse
Thank you! I probably will. Unless of course they come out with a stable Lollipop rom, then I might be tempted to install Clockworkmod and check it out.
EDIT: Turns out the root was not the problem. It was the developer edition firmware. I flashed the new firmware from the OTA update separately and now I'm booting fine.
If you have this exact problem, unbrick instructions here:
Try using Phone Flash Tool from the Dell site, and this zip:
https://mega.co.nz/#!Vgw1CTYT!y1_tSTCMmzrhJSQy0lxwY59iyRhdJovC-IDMF25PB4k
It's the new boot firmware binaries packed in the developer edition firmware zip with the xml changed to point to the new files.
For the flashing process of this zip, start with the tablet completely off and disconnected, then in Phone Flash Tool, load the zip file, click "Start to flash" (the button near the bottom should be blue/clickable), then once it's counting attempts (attempt #0, attempt #1, etc.) then connect USB. It should proceed to flash.
Click to expand...
Click to collapse
ORIGINAL POST:I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
xBIGREDDx said:
I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
Click to expand...
Click to collapse
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
vampirefo said:
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
Click to expand...
Click to collapse
What is the process to unroot on our device?
Install es file explorer or root explorer.
Grant root access to the app.
in es you need to enable root explorer in the settings menu.
Go to
Code:
/system/bin
delete su (mine was not locate in here)
/system/xbin
delete su (mine was here)
/system/app/Superuser.apk delete this
SuperSu has a selection of uninstall options in the app's menus.
vampirefo said:
Well, yeah anytime a update via OTA is available unroot and revert the device to stock, the update is designed to go over a stock tablet.
Click to expand...
Click to collapse
I've applied plenty of OTAs in the past to other devices on top of rooted systems, and never had a problem as bad as bootlooping.
(Not saying it's not my fault, as I knew there was a risk, I guess I was just running on a series of good luck, or maybe other companies write better OTA pre-checking features.)
good you mentioned this
supersu - complete unroot - update worked
i forgot to uninstall xposed - modifications where gone after reboot (batterie percentage etc. from gravitybox)
has anyone tried rooting after update? could the kitkat method work?
kage69 said:
good you mentioned this
supersu - complete unroot - update worked
i forgot to uninstall xposed - modifications where gone after reboot (batterie percentage etc. from gravitybox)
has anyone tried rooting after update? could the kitkat method work?
Click to expand...
Click to collapse
It's hard to say, as lollipop was just released, only you guys with lollipop can test and see.
Neither SDC nor myself have lollipop so we can't test.
sent from my kingSing T1 via taptalk
On mine, I forgot to un-root with no issues, but it defaults to encrypting the tablet and now I can't re-root.
Hmm, I also had the developer firmware installed from their opensource site; maybe that's it? The only other thing would have been Busybox, I think...
EDIT: HEY IT WORKS! I just pulled the firmware binaries out of the update.zip, and flashed with xfstk-downloader, and now I'm on the Encrypting screen! Thanks!
old root method dont work :crying:
kage69 said:
old root method dont work :crying:
Click to expand...
Click to collapse
Well you tried, did you get an error? Can you give more details?
sent from my kingSing T1 via taptalk
xBIGREDDx said:
EDIT: Turns out the root was not the problem. It was the developer edition firmware. I flashed the new firmware from the OTA update separately and now I'm booting fine.
ORIGINAL POST:I just received the Lollipop OTA, and I installed it. I did not remove my Superuser installation or my Busybox installation first. Now I am bootlooping.
So, take this as a warning, do not install the OTA if you have modified your system.
Now I am going to try to find a way to fix this...
Click to expand...
Click to collapse
Will the same rooting procedure work fine after you have upgraded to Lollipop on the 7840? Wanted to try but not sure if everything will work. Also since i'm on a Mac the .bat file doesn't run out of the box...
ely105 said:
Will the same rooting procedure work fine after you have upgraded to Lollipop on the 7840? Wanted to try but not sure if everything will work. Also since i'm on a Mac the .bat file doesn't run out of the box...
Click to expand...
Click to collapse
@kage69 says no, only you guys with lollipop can confirm or deny if root works or not.
sent from my kingSing T1 via taptalk
the tool flashes temp cwm but the tab dont boot to recovery
stays in bootloader where you can choose boot normal, power down and recovery
choosing recovery boots to stock recovery
there were errors while flashing, ill post them tomorrow
reading a book in bed on my lollipopped tab now
hope we can root it again, need that for customizations and airaudio
see u tomorrow
So how were you able to flash after bootlooping the first time when you tried to update with root? I cannot get into the bootloader or anything :silly:
Does any one have the ota so I can patch the stock firmware to investigate rooting it?
might be stored in cache i think
cant get to that without root
kage69 said:
might be stored in cache i think
cant get to that without root
Click to expand...
Click to collapse
Yeah I we hoping someone captured it before updating
xBIGREDDx said:
Hmm, I also had the developer firmware installed from their opensource site; maybe that's it? The only other thing would have been Busybox, I think...
EDIT: HEY IT WORKS! I just pulled the firmware binaries out of the update.zip, and flashed with xfstk-downloader, and now I'm on the Encrypting screen! Thanks!
Click to expand...
Click to collapse
Exactly which binaries did you flash back? In the zip I see:
dnx_fwr_ann_a0-mofd_v1.bin
dnx_fwr_ann_a0-mofd_v1-DBG.bin
dnx_fwr_blackburn_preqs_preqs.bin
dnx_fwr_blackburn_qs_qs.bin
dnx_fwr_preqs.bin
dnx_fwr_qs.bin
ifwi_ann_a0-mofd_v1.bin
ifwi_ann_a0-mofd_v1-DBG.bin
ifwi_preqs.bin
ifwi_qs.bin