[Q] need help please(unroot) - Samsung Galaxy Mega

how do i unroot or at least hide my root for mabinogi duel korean version?
current ROM: JDQ39-I9205XXUAMF3
current kernel 3.4.0
thanks

Do you have SuperSU on it? If so just look in SuperSu settings - there is a choice in there to Unroot. choose that, reboot and you should be set.

No i dont have supersu on my phone... although it rooted

pekkauwer said:
No i dont have supersu on my phone... although it rooted
Click to expand...
Click to collapse
You could install Xposed Installer http://repo.xposed.info/module/de.robv.android.xposed.installer then RootCloak http://repo.xposed.info/module/com.devadvance.rootcloak

Honestly ive done that thats why im asking to hide my root... the rootcloak doesnt work.. i have added the exception and reboot but still gives error something about rooted

Related

[Q] Sprint Galaxy Nexus No Root -- SU Binary Problems

Hello guys, I am new to XDA. I've been reading a lot of forums before I decided to register. So, here is my dilemma... I have a Sprint Galaxy Nexus and tried to root it. I rooted it successfully but when I open SuperSU it says something about SU Binaries couldn't be found or old. I downloaded Superuser from the Play Store and that says my SU binary is out of date. When I click on Recovery Install nothing happens. Root Checker says i still have root access. Xposed Framework and GravityBox work like normal. When I clicked on SuperSU again, it said the same thing and this time, after that Root Checker said I have NO root access, but GravityBox and my other Xposed modules still work fine when changing stuff like status bar clock or something. Titanium Backup doesn't work at though, its stuck on "Asking for root rights" I don't know what to do! I don't wanna brick my phone but I want this fixed. Anybody got suggestions?
srv2D said:
Hello guys, I am new to XDA. I've been reading a lot of forums before I decided to register. So, here is my dilemma... I have a Sprint Galaxy Nexus and tried to root it. I rooted it successfully but when I open SuperSU it says something about SU Binaries couldn't be found or old. I downloaded Superuser from the Play Store and that says my SU binary is out of date. When I click on Recovery Install nothing happens. Root Checker says i still have root access. Xposed Framework and GravityBox work like normal. When I clicked on SuperSU again, it said the same thing and this time, after that Root Checker said I have NO root access, but GravityBox and my other Xposed modules still work fine when changing stuff like status bar clock or something. Titanium Backup doesn't work at though, its stuck on "Asking for root rights" I don't know what to do! I don't wanna brick my phone but I want this fixed. Anybody got suggestions?
Click to expand...
Click to collapse
Do you have a custom recovery installed? If not, you should. If you do, then you should be able to just install the latest zip from Chainfire to get your binaries up to date and working properly.
Install this via custom recovery (CWM or TWRP) http://download.chainfire.eu/396/SuperSU/UPDATE-SuperSU-v1.94.zip?retrieve_file=1
I have TWRP v.2.1.2 installed, and I also put on a different su binary I found on a website that said modified for Android 4.3 devices, before I did that I didn't have root access even when I tried too
srv2D said:
I have TWRP v.2.1.2 installed, and I also put on a different su binary I found on a website that said modified for Android 4.3 devices, before I did that I didn't have root access even when I tried too
Click to expand...
Click to collapse
UPDATE: Thank you so much! I installed this and now SuperSU works just fine, Titanium Backup works fine, and I can still use GravityBox!:laugh:
:highfive:

How to install VIPER4ANDROID on BLU VIVO 5

Hello everyone!
I share my experience installing and configuring VIPER4ANDROID in my BLU VIVO 5.
Before starting the phone must be rooted to this point use the following guide published on the Internet:
http://reviewroots.com/root-BLU-Vivo-5-with-or-without-pc
1) Install VIPER4ANDROID FX
http://forum.xda-developers.com/showthread.php?t=2191223
2) Download and install SELINUXMODECHANGER
http://forum.xda-developers.com/showthread.php?t=2524485
3) Open VIPER4ANDROID and install the driver
4) Open SELINUXMODECHANGER and change mode to Permissive
After these steps VIPER4ANDROID is ready to use
Screenshots please
Framaroot worked for you??? I had to return my first Blu Vivo 5 because it bootlooped after trying to install SuperSU over Kingroot with Framaroot. Besides, don't you need to flash Viper4android on a custom recovery? Which none are available for our phone that I know of.
al_bert7 said:
Framaroot worked for you??? I had to return my first Blu Vivo 5 because it bootlooped after trying to install SuperSU over Kingroot with Framaroot. Besides, don't you need to flash Viper4android on a custom recovery? Which none are available for our phone that I know of.
Click to expand...
Click to collapse
Really man? Oh, thanks. I was going to root this device with kingroot.
Chiclez said:
Really man? Oh, thanks. I was going to root this device with kingroot.
Click to expand...
Click to collapse
Alright, figured out what I did wrong. You can root using king root but do not check oem unlock in developer settings, that's what causes the bootloop. As for V4A I was able to get it to work with the instructions in the OP. But I didn't switch out king root for supersu out of fear of it bricking again haha.
Also, for those of you who got V4A working (Rooted, BusyBox Installed, SELinux Set to Permissive) and noticed V4A stop working after a few seconds after leaving the app, go to the V4A settings and check "Show Notification". That's it!
al_bert7 said:
Alright, figured out what I did wrong. You can root using king root but do not check oem unlock in developer settings, that's what causes the bootloop. As for V4A I was able to get it to work with the instructions in the OP. But I didn't switch out king root for supersu out of fear of it bricking again haha.
Also, for those of you who got V4A working (Rooted, BusyBox Installed, SELinux Set to Permissive) and noticed V4A stop working after a few seconds after leaving the app, go to the V4A settings and check "Show Notification". That's it!
Click to expand...
Click to collapse
I think it's related to swapping kingroot for supersu. I got that bootloop on a different device, had to reinstall the ROM. Didn't even try on my VIVO, just accepted I'll have to deal with KingRoot. It's not terrible, though. I just hope it's not sending my info elsewhere.
I used SuperSu Me pro to get rid of kingroot and it worked like a charm.
victorvscn said:
I think it's related to swapping kingroot for supersu. I got that bootloop on a different device, had to reinstall the ROM. Didn't even try on my VIVO, just accepted I'll have to deal with KingRoot. It's not terrible, though. I just hope it's not sending my info elsewhere.
Click to expand...
Click to collapse
padevoto said:
Hello everyone!
I share my experience installing and configuring VIPER4ANDROID in my BLU VIVO 5.
Before starting the phone must be rooted to this point use the following guide published on the Internet:
http://reviewroots.com/root-BLU-Vivo-5-with-or-without-pc
1) Install VIPER4ANDROID FX
http://forum.xda-developers.com/showthread.php?t=2191223
2) Download and install SELINUXMODECHANGER
http://forum.xda-developers.com/showthread.php?t=2524485
3) Open VIPER4ANDROID and install the driver
4) Open SELINUXMODECHANGER and change mode to Permissive
After these steps VIPER4ANDROID is ready to use
Click to expand...
Click to collapse
Thanks!!!
Link does not work
This link to "root-BLU-Vivo-5-with-or-without-pc" does not work anymore.

Can I hide Root from apps like Pokemon go?

So I've tried looking for ways to play pokemon go on my recently rooted, recovery and custom rommed S6 Edge...
BUT all I can find is stuff about Magisk which seems terrible complex and annoying..
Is there an easier way?
I'm currently running this ROM - http://forum.xda-developers.com/galaxy-s6-edge/development/nexify-fast-clean-t3448971
aulterra said:
So I've tried looking for ways to play pokemon go on my recently rooted, recovery and custom rommed S6 Edge...
BUT all I can find is stuff about Magisk which seems terrible complex and annoying..
Is there an easier way?
I'm currently running this ROM - http://forum.xda-developers.com/galaxy-s6-edge/development/nexify-fast-clean-t3448971
Click to expand...
Click to collapse
You need root, Xposed, magisk and suhide 0.55. It is very complex.
There's an easier way though. Download supersu 2.78 sr1 systemless to your phone. In supersu app do full unroot, reboot and you should be able to play pokemon go. When your done playing just flash the supersu 2.78 sr1 through twrp to gain root back.it takes 10 seconds to unroot and about 20 seconds to re root again.
So if you can be bothered doing that it's easiest.
Oh and you must have an enforcing kernel not permissive.
callumbr1 said:
You need root, Xposed, magisk and suhide 0.55. It is very complex.
There's an easier way though. Download supersu 2.78 sr1 systemless to your phone. In supersu app do full unroot, reboot and you should be able to play pokemon go. When your done playing just flash the supersu 2.78 sr1 through twrp to gain root back.it takes 10 seconds to unroot and about 20 seconds to re root again.
So if you can be bothered doing that it's easiest.
Oh and you must have an enforcing kernel not permissive.
Click to expand...
Click to collapse
Ok... So... I literally have no Idea about my type of kernel..
All I know is I was going to unroot from the su app the other night, but it asked if I wanted to keep my boot or something and I didn't know which option to choose.
Annnd after unrooting, going back to stock pokemon go still thinks I'm running a custom rom and has banned my account xD
aulterra said:
Annnd after unrooting, going back to stock pokemon go still thinks I'm running a custom rom and has banned my account xD
Click to expand...
Click to collapse
Go on settings and software info.
What does it say for SE android status? Enforcing or permissive?

Looking to install custom ROM (G925F)

So after having a metric f**k ton of issues trying to get a custom recovery to work on 6.0.1, I gave up trying to install a custom rom and eventually went back to stock unrooted. After updating to 7.0 and waiting a bit, I gave it another go and managed to get TWRP to work and rooted my phone. Now I'm looking to install a custom ROM and have a few questions.
Is there anything I should know before going in? Any prerequisites I need to get before/after flashing a custom ROM so certain features will work?
Can I use any custom ROM that is listed as compatible with 7.0/G925F? Or do I have to be more specific as to what version I get?
What should I keep an eye out for? Any features that are good/bad?
Anything else I should know?
As for my choices, it's currently between Nemesis and Noble. Anyone used either and care to share your experience? Any other recommendations?
ProdigyThirteen said:
So after having a metric f**k ton of issues trying to get a custom recovery to work on 6.0.1, I gave up trying to install a custom rom and eventually went back to stock unrooted. After updating to 7.0 and waiting a bit, I gave it another go and managed to get TWRP to work and rooted my phone. Now I'm looking to install a custom ROM and have a few questions.
Is there anything I should know before going in? Any prerequisites I need to get before/after flashing a custom ROM so certain features will work?
Can I use any custom ROM that is listed as compatible with 7.0/G925F? Or do I have to be more specific as to what version I get?
What should I keep an eye out for? Any features that are good/bad?
Anything else I should know?
As for my choices, it's currently between Nemesis and Noble. Anyone used either and care to share your experience? Any other recommendations?
Click to expand...
Click to collapse
The first and most important thing to do is make a backup. A nandroid backup is fine but make sure you back up your EFS folder. If this gets corrupted you will corrupt your IMEI and have no signal permanently. So backup efs and store somewhere safe like your pc.
I recommend doing full wipe before installing a custom ROM just so it's a clean install.
After that your pretty much good to go.
You can use any ROM that's compatible for your model only. So any G925F ROMs will work fine. Most support a number of models like G925F/I/V etc.
Most s6 edge custom ROMs are stable and have very few issues, and if there are issues then generally there are fixes for them.
Nemesis and Noble are both good stable ROMs. Also Omega ROM is a good choice. But my favourite that I used for over a year is CarHD ROM. It's customisation is endless.
One more is AlexisROM. Good ROM used for a while.
Hope this helps.
callumbr1 said:
snip
Click to expand...
Click to collapse
So after a painfully long download, I installed CarHD and I'm liking everything I see. My only issue is trying to get SafetyNet to pass. I've removed SuperSU, installed Magisk and its kernel and now whenever I check SafetyNet, it fails with "CTS profile mismatch". I've looked around on a few different threads about it and everything I've tried hasn't worked. Mostly because they revolve around MagiskHide, which isn't showing up for me.
My first thought is to completely uninstall magisk, go back to a stock kernel and start off fresh, but I'm not going to do that just yet as I wanted your opinion first. Is that the best thing to do or would it cause more harm than good?
And if it wasn't already obvious, yes I'm still pretty damn new to this, but I'm trying not to **** up as I quite like my phone working.
Edit: solved the MagiskHide not showing.. I'm an idiot and forgot it was under settings and not enabled by default.
ProdigyThirteen said:
So after a painfully long download, I installed CarHD and I'm liking everything I see. My only issue is trying to get SafetyNet to pass. I've removed SuperSU, installed Magisk and its kernel and now whenever I check SafetyNet, it fails with "CTS profile mismatch". I've looked around on a few different threads about it and everything I've tried hasn't worked. Mostly because they revolve around MagiskHide, which isn't showing up for me.
My first thought is to completely uninstall magisk, go back to a stock kernel and start off fresh, but I'm not going to do that just yet as I wanted your opinion first. Is that the best thing to do or would it cause more harm than good?
And if it wasn't already obvious, yes I'm still pretty damn new to this, but I'm trying not to **** up as I quite like my phone working.
Click to expand...
Click to collapse
You don't need any kind of custom kernel to use magisk, or at least you shouldn't. It should work perfectly fine with stock.
Try updating magisk manager app from xda labs and magisk hide should appear.
If it does then just enable magisk hide and hide all apps that require safety net, hide knox also if it's still on the ROM. Then you should pass.
If this fails I recommend to flash the ROM again, no need to wipe data and then choose magisk in aroma installer and flash again.
Let me know if you need help :good:
callumbr1 said:
You don't need any kind of custom kernel to use magisk, or at least you shouldn't. It should work perfectly fine with stock.
Try updating magisk manager app from xda labs and magisk hide should appear.
If it does then just enable magisk hide and hide all apps that require safety net, hide knox also if it's still on the ROM. Then you should pass.
If this fails I recommend to flash the ROM again, no need to wipe data and then choose magisk in aroma installer and flash again.
Let me know if you need help :good:
Click to expand...
Click to collapse
Fixed the MagiskHide issue, but simply enabling hide on the apps that I want to use doesn't work. I tried reinstalling the ROM as you said, but it never gave the option to choose Magisk over SuperSU. Then when I switched from SuperSU to Magisk, SuperSU was removed normally, but Magisk is installed and saying I don't have root access. Flashed Magisk kernel from CarHD as TWRP wasn't allowing install of Magisk with the other that came stock, then flashed Magisk again. Magisk saying I now have root access, but Magisk isn't installed and when I try to install it, the app crashes. Currently checking Magisk threads for a solution for that.
Tried reinstalling Magisk and clearning data/cache to no avail... I still have root access, but can't install Magisk through the manager.
Uninstalled Magisk, flashed stock kernel, re flashed magisk and now SafetyNet is passing, but still can't install Magisk through the Manager
ProdigyThirteen said:
Uninstalled Magisk, flashed stock kernel, re flashed magisk and now SafetyNet is passing, but still can't install Magisk through the Manager
Click to expand...
Click to collapse
If you have root access and safety net pass then I don't understand what you mean by can't install magisk through the app?
So you have magisk manager app installed?
callumbr1 said:
If you have root access and safety net pass then I don't understand what you mean by can't install magisk through the app?
So you have magisk manager app installed?
Click to expand...
Click to collapse
Yeah, the manager is installed, but when I open it, it says there is an update available and under status says Magisk is not installed, v130 is available. There is no option to enable Magisk hide or any other extras available for download.
Screenshot of magisk
ProdigyThirteen said:
Screenshot of magisk
Click to expand...
Click to collapse
It's the magisk manager app. You need to install the new one. Delete the one you currently have installed and download latest one from magisk Thread here or from xda labs.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Should look similar to this.
callumbr1 said:
It's the magisk manager app. You need to install the new one. Delete the one you currently have installed and download latest one from magisk Thread here or from xda labs.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Should look similar to this.
Click to expand...
Click to collapse
Tried to uninstall it, no option to. Downloaded something to uninstall system apps, tried to uninstall it, still there. Tried to install a new app over it, gave an error saying app already installed with same name.
ProdigyThirteen said:
Tried to uninstall it, no option to. Downloaded something to uninstall system apps, tried to uninstall it, still there. Tried to install a new app over it, gave an error saying app already installed with same name.
Click to expand...
Click to collapse
You should be able to uninstall it with titanium backup or any app to remove system app.
Infact you should be able to just remove it as you would remove any other app.
Use what you used before to remove it when it didn't go and then reboot and it should go. If not flash the uninstaller from magisk thread.
Then start again, if you flash the newest magisk from the thread on here then it also should install newest magisk manager app.
callumbr1 said:
You should be able to uninstall it with titanium backup or any app to remove system app.
Infact you should be able to just remove it as you would remove any other app.
Use what you used before to remove it when it didn't go and then reboot and it should go. If not flash the uninstaller from magisk thread.
Then start again, if you flash the newest magisk from the thread on here then it also should install newest magisk manager app.
Click to expand...
Click to collapse
No app that removes system apps can remove Magisk Manager it seems... TB says "Failed to locate the apk file", NoBloat Free says it removed it, but even after rebooting it's still there. Flashing the uninstall doesn't remove it either. I would manually uninstall through root explorer, but there's a risk I delete the wrong file and screw something else up.
Edit: Found Magisk Manger in root/system/app/magisk, backed it up, deleted it, rebooted, seems to be gone. Will try intalling new APK
Fixed it. Had to manually delete the apk, then installed the updated version and now it's showing as magisk is installed perfectly fine. Thanks for all the help.
Third and hopefully final edit: Getting kernel is not seandroid enforcing. Tried uninstalling magisk, flashing stock kernel, reinstalling magisk and still getting it. But it doesn't seem to be messing with anything, can still boot fine, safetynet is still passing so all looks pretty good.
callumbr1 said:
snip
Click to expand...
Click to collapse
No point starting a new thread when I can just ask here as it's a somewhat follow on question. I can't seem to get V4A to work. I've installed the module from Magisk, installed the APK, restarted my phone, loaded up the app and checked the driver just for it to say Status: Abnormal / Audio Format: Unsupported. Can't seem to find anything about a fix for it, been searching for about an hour, so either I'm blind or there's nothing on it (I'm betting it's the former).
When I open the app, I get a message prompting me to update/install the driver, despite it already being installed through Magisk. I've tried both the standard v2.5.0.5 apk and Nougat test fix, standard doesn't do anything and test fix has update/install prompt.
ProdigyThirteen said:
No point starting a new thread when I can just ask here as it's a somewhat follow on question. I can't seem to get V4A to work. I've installed the module from Magisk, installed the APK, restarted my phone, loaded up the app and checked the driver just for it to say Status: Abnormal / Audio Format: Unsupported. Can't seem to find anything about a fix for it, been searching for about an hour, so either I'm blind or there's nothing on it (I'm betting it's the former).
When I open the app, I get a message prompting me to update/install the driver, despite it already being installed through Magisk. I've tried both the standard v2.5.0.5 apk and Nougat test fix, standard doesn't do anything and test fix has update/install prompt.
Click to expand...
Click to collapse
Good stuff. As for the seandroid message on boot you can just ignore it. It's not an error and will stay but doesn't affect anything.
As for viper first thing to try is remove the currently installed app and remove it from magisk manager modules.
Install busybox.
Freeze sound alive with titanium backup (don't delete just freeze)
Then flash this through TWRP
https://mega.nz/#!CV5wQYSa!i-V1UvJ_Lh9YoZDPN9rUUXuJNgXWcXRlhBE83fYH7e8
After this if it doesn't work let me know and I'll tell you next steps.
callumbr1 said:
Good stuff. As for the seandroid message on boot you can just ignore it. It's not an error and will stay but doesn't affect anything.
As for viper first thing to try is remove the currently installed app and remove it from magisk manager modules.
Install busybox.
Freeze sound alive with titanium backup (don't delete just freeze)
Then flash this through TWRP
https://mega.nz/#!CV5wQYSa!i-V1UvJ_Lh9YoZDPN9rUUXuJNgXWcXRlhBE83fYH7e8
After this if it doesn't work let me know and I'll tell you next steps.
Click to expand...
Click to collapse
Tried that, still getting abnormal/unsupported.
ProdigyThirteen said:
Tried that, still getting abnormal/unsupported.
Click to expand...
Click to collapse
Now check that magisk module is enabled and the audio modification module is enabled.
You may also need a permissive kernel to get viper to work.
callumbr1 said:
Now check that magisk module is enabled and the audio modification module is enabled.
You may also need a permissive kernel to get viper to work.
Click to expand...
Click to collapse
Googling permissive kernel is just coming back with a bunch of threads saying get a terminal emulator, type su / setenforce 0. Tried that, trips safetynet and doesn't change Viper.
I feel like it's not changing viper because I need it to stick through reboots, enable it, then reboot, but it's not persistent. How would one go about making it stick?
And honestly, is viper really worth all this hassle?
ProdigyThirteen said:
Googling permissive kernel is just coming back with a bunch of threads saying get a terminal emulator, type su / setenforce 0. Tried that, trips safetynet and doesn't change Viper.
I feel like it's not changing viper because I need it to stick through reboots, enable it, then reboot, but it's not persistent. How would one go about making it stick?
And honestly, is viper really worth all this hassle?
Click to expand...
Click to collapse
You can try Hacker kernel
https://forum.xda-developers.com/ga...l-hacker-kernel-s6-universal-t3254487/page234
Or arter kernel
http://arter97.com/browse/exynos7420/kernel/22.0/g925fi/
As for is it worth it? In my opinion yes 100%.
It depends really if you like the stock effects enough. Personally I love music and love been able to customise it. It sounds 10000x better in my opinion.

Having problems to install magisk on my phone

So i have a rooted phone and wanted to install Magisk to hide my root from some apps. But for some reason it fails! I need help
serhatuiz said:
So i have a rooted phone and wanted to install Magisk to hide my root from some apps. But for some reason it fails! I need help
Click to expand...
Click to collapse
Are you using supersu currently? As far as I know, you need to unroot your phone before flashing Magisk.
You can do it easily by clicking "Unroot" in SuperSU.
If there is some other problem, please provide details.

Categories

Resources