I used to get LTE around here with this phone. Since about a month ago, things have gotten weird. If I use LTE/cdma/evdo mode or global, it just goes to 3G and never connects to LTE. If I go to LTE/gsm/wcdma, it gets LTE but no voice or text (which makes sense because Verizon isn't GSM). The LTE performance also seems really bad in this mode. It seems as though 3G is somehow prioritized above LTE, so if both are allowed it defaults to 3G. Manually switching APN's doesn't help. If I select "LTE - Verizon Internet" it doesn't connect to data and then after about 30 seconds goes to "EHRPC - Verizon Internet " and connects to 3G. Similar results on multiple different ROMs and radios.
I'm wondering if the SIM card could somehow be to blame. If I go to the Verizon store, will they give me a free SIM despite having CM on my phone? Don't care about warranty, phone is over a year old.
Are you on a custom or stock Rom? Is there a "Global" setting under networks? That's what my s4 uses. I don't think it could be your SIM cause if it was you wouldn't have any signal at all, not just 4g.
Hi,
I have been experiencing a few issues with the 4G LTE on my LG V10 H901 (T-Mobile). What happens is this.
In Network mode I selected GSM / WCDMA / LTE Auto. This initially worked fine and could get a data connection. 2 days after, I noticed I couldn't get a data connection anymore, the 4G LTE icon at the top was displaying with a down arrow lit. So I went in the Network mode and checked my APN everything was ok. Decided to switch from GSM / WCDMA Auto where I got a 4G connection (icon 4G displayed at the top) and I finally got a data connection.. Changed it back to GSM / WCDMA / LTE Auto, and there I was back on LTE... I had to reboot my phone and that is when I noticed the same thing happened again!!! No LTE connection and had to first select GSM / WCDMA Auto to get 4G.. If I reboot with GSM / WCDMA Auto I get a data connection fine.. The problem only occurs when I have the Network mode on GSM / WCDMA / LTE Auto. Anyone else having this issue? Is there a fix?
Thanks
I would say it's a hardware problem with the phone I've had mine for a month i never touched network settings and the phone gets a better data connection then any phone I've ever had LTE pretty much all the time where other phones wouldn't maybe a factory reset would fix it worth a shot
The first V10 i got from T-Mobile had somewhat of a similar problem but with WiFi, it would connect but speed was horrible. And LTE isnt that great in my area either. I read around the forums and notice that many have done factory resets and that fixes everything. I did that and lowe and behold, it did. WiFi was fast again and LTE speed improved but still sucks....its my area, not the phones fault. For some reason, a reset helps.
However, I was still just 4 days in since I got my phone so I just went back and had them replace it. I just told them that the WiFi doesnt hold....they didnt really ask me tons of questions. I replaced it only because I am paying for the phone and me having to do a "fix" to make it work doesnt sound right...so I want a new good phone lol. The new phone worked fast from the get go...no reset needed.
Just got the V10 was having those wifi issues initially so brought phne back n exchanged for another 1 and this 1 workes fine but now Im having dropped call s inside my house ,verizon said no antenna issues i can bring phne back n replace for something else or another v10 but that is time consuming ,please anyone having drop d call s....I live Long Island NY so verizon overage is better then most carriers...INaNYmin...
I began having the exact same issue on Jan 16. Had the phone since Dec 25th, worked perfect. Then, all of a sudden, it began to lose LTE connectivity. At first I thought it was a down tower, but the problems persisted an eventually got much worse wherever I went. On a full charge the phone will behave normally for a while, but eventually it starts losing data connectivity altogether, cycling between 4G LTE, 4G, 3G, 2G, trying to connect. during this process the battery drains a lot, it never really connects, and sometimes calls and text messaging fail. Tried every network setting, soft reboot, hard reboot, safe mode, clear cache, factory reset....problem persists. T-mobile concludes it must be defective. We shall see. Awaiting a replacement.
Having the same issue. Looks like it's a common problem. Any fix for this yet?
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
anonimo6971 said:
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
Click to expand...
Click to collapse
Wind works on hspa not LTE. That's why it works. I've noticed that it works fine on hspa(4g) but when I put it on LTE(4gLTE) it works for a while then stops.
gslide said:
Wind works on hspa not LTE. That's why it works. I've noticed that it works fine on hspa(4g) but when I put it on LTE(4gLTE) it works for a while then stops.
Click to expand...
Click to collapse
For me, Wind works fine on GSM/WCDMA or GSM/WCDMA/LTE
With Bell, it will not connect on GSM/WCDMA/LTE.
However, with Bell, if I put it on GSM/WCDMA, it will connect. Then if I change it to GSM/WCDMA/LTE, it will connect to Bell's LTE.
Occasionally, it will lose its data connection... and then if I toggle between GSM/WCDMA & back to GSM/WCDMA/LTE, it reconnects. This seems to happen once every 2-3 days
I don't know why it does this. It was actually very frustrating until I figured that out. I almost dropped Bell because I was not able to connect on LTE for the longest time!!
I just keep my Wind plan for the US roaming (on Tmobile LTE down there)
anonimo6971 said:
For me, Wind works fine on GSM/WCDMA or GSM/WCDMA/LTE
With Bell, it will not connect on GSM/WCDMA/LTE.
However, with Bell, if I put it on GSM/WCDMA, it will connect. Then if I change it to GSM/WCDMA/LTE, it will connect to Bell's LTE.
Occasionally, it will lose its data connection... and then if I toggle between GSM/WCDMA & back to GSM/WCDMA/LTE, it reconnects. This seems to happen once every 2-3 days
I don't know why it does this. It was actually very frustrating until I figured that out. I almost dropped Bell because I was not able to connect on LTE for the longest time!!
I just keep my Wind plan for the US roaming (on Tmobile LTE down there)
Click to expand...
Click to collapse
Yup exact same issue with me and that's how I resolve it as well I'm with koodo and I lose LTE. I was going to warranty this phone but I think it's a common issue.
I just want to quickly point out that I am seeing the exact same issue on Virgin Mobile (Bell). I also noticed that the performance of the phone decreases drastically when it is connected through mobile data instead of WiFi. Anyone else sees this and knows how to fix it?
Lg v10 t mobile no connection
I'm having a similar issue I get a 4G LTE signal but if I make a call once I end it I loose all signal including the bars it wont let me text or call it says network not available and it will do that till I travel a few miles. I'm not in a dead zone because it does it in the heart of the city and on the buisest streets in Tampa Florida then it will come back and sometimes I won't get a signal for a entire day out shoe have any solutions?
anonimo6971 said:
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
Click to expand...
Click to collapse
Hey,
I'm using this phone in Canada too, on Telus. Ever since the OTA update 2 days ago I've been having data connection errors over the network. Did you find a fix?
---------- Post added at 01:59 PM ---------- Previous post was at 01:51 PM ----------
SasamiAdachi said:
I just want to quickly point out that I am seeing the exact same issue on Virgin Mobile (Bell). I also noticed that the performance of the phone decreases drastically when it is connected through mobile data instead of WiFi. Anyone else sees this and knows how to fix it?
Click to expand...
Click to collapse
I'm seeing this too, but it just started after my OTA update. So frustrating bc I love the phone.
I had a similar problem. With The latest software (,,v20c,,) With the LGUP Software I software put it back (,,v20a,,) . And it seems the problem disappeared. Last part of the modem software is not good. Even test elements. Sorry for my bad english for knowledge. LGUP software very simply . ( i have V10 960A Unlocked (Eu version) android 6.0 and T-mobile LTE )
If you need help:
http://www.androidsage.com/2016/04/12/update-t-mobile-lg-v10-android-6-0-marshmallow-h90120e-lgup/
http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
I have permanent SIM unlocked phone .and I want to update to mm6.0
Present software :5.1.1 loollipop
Rooted :yes
It's mobile h901
Warranty:I bought imported phone unlocked so no warranty guide me safe way to update my phone
Thanks
Hello to all.
I have some data issues with my Z2.
I'm on t-mobile HR (croatia).
So, if the phone is set to preffer LTE data network and when I leave WiFi network the phone can't connect to data network, if there is no LTE network. Than I must set the phone to preffer 3G, phone connects to 3G or 3G+, and than to 4G when I set it to preffer 4G again.
When the phone is set to preffer 3G than if I leave WiFi the phone immediately switch to 3G.
In both casses, after the data network is found (3G, 3G+) and I set the phone to preffer the LTE phone switch to 4G.
I foud this problem since the phone is updated to 4.4.4 Kitkat and now I'm on 5.1.1. Lollipop (.264 version) and the problem still persist.
Please help me to solve it because it's really annoying.
And yes, the whole area is covered with 4G signal, but sometimes is weak.
Zoran81 said:
Hello to all.
I have some data issues with my Z2.
I'm on t-mobile HR (croatia).
So, if the phone is set to preffer LTE data network and when I leave WiFi network the phone can't connect to data network, if there is no LTE network. Than I must set the phone to preffer 3G, phone connects to 3G or 3G+, and than to 4G when I set it to preffer 4G again.
When the phone is set to preffer 3G than if I leave WiFi the phone immediately switch to 3G.
In both casses, after the data network is found (3G, 3G+) and I set the phone to preffer the LTE phone switch to 4G.
I foud this problem since the phone is updated to 4.4.4 Kitkat and now I'm on 5.1.1. Lollipop (.264 version) and the problem still persist.
Please help me to solve it because it's really annoying.
And yes, the whole area is covered with 4G signal, but sometimes is weak.
Click to expand...
Click to collapse
I had the same problem, i flashed eXistenZ rom now and it didnt reoccur. If it reoccurs ill tell you
MathieuBerger said:
I had the same problem, i flashed eXistenZ rom now and it didnt reoccur. If it reoccurs ill tell you
Click to expand...
Click to collapse
well, I don't feel confortable with rooting my device and flashing custom software..it would be great to solve the problem without that
I recently purchased an Xiaomi Redmi Note 3 Pro phone (kenzo), it covers all the bands that rogers uses in my area in Canada, I believe.
https://en.wikipedia.org/wiki/Rogers_Wireless
I can connect with the phone on LTE, HSPA+ with no problem, if available. Sometimes, if I am in certain area's, the signal indicator drops to 3G .... it shows a decent signal, but no calls or data can go through.
In this example on the following chart, the first WCDMA connection,my phone only indicates 3G and I can not make a call or use data. When my call attempt is done, it goes back to LTE. Then I try again. Then for the second WCDMA connection on the chart, I am connected as H+, I can make a call and use data. Whenever this phone connects to CID 31072 the problem happens. When I connect to CID 31075, no problem. These are just examples of towers that I reach from my home. I get the same problem occuring other areas.
Any suggestions on what I need to change on my phone? Is my phone making a kind of 3G connection for some reason, which Rogers doesn't support? I have tried everything I can think of, Miui dev versions, CM13, LineageOS 14.1 etc, change Android Radio Menu settings, etc.
Nothing seems to fix this issue.
Any advice would be greatly appreciated!
I have been using Network Signal Guru, and have figured out that the phone will connect calls data on 3g if the band it finds is B5-850M .... if the tower tries to connect to is B2-PCS-1900 the call fails.
I tried to block the use of band 2 with Network Signal Guru, but it seems to still use it when it finds it.
I have since flashed a LineageOS rom and used the Network Signal Guru to disable band 2 WCDMA. The phone has not been experiencing the issue at all since. I am cautiously optimistic that I have found a solution. Still not sure why this band doesn't work here though.
I searched the web for 15 minutes and came up with nothing good, so I'm asking the general audience here at XDA.
Basically, it comes down to: If I need to use APN settings for my carrier, like using Verizon Note4 on T-Mobile network, what happens when my phone connects to another carrier like AT&T with HSPA+ that doesn't match up to the current APN settings?
The immediate answer appears to be that I won't get any data while on the AT&T network.
In more detail:
I have a Note 4 that was purchased through Verizon long ago. I recently rooted and rommed this device to CyanogenMod and put a T-Mobile SIM in it. I added the T-Mobile APN settings and it works fine on T-Mobile LTE since the Note4 has the correct 700MHz band (or whatever). However, when I'm driving to work, the connection drops from T-Mobile and it hooks up to AT&T (I think) and shows H+ in my notification bar. I assume that's HSPA+ from AT&T, as that is the only carrier that has HSPA+ in my entire state. When it does this, I believe that my data connection does not work because SiriusXM stops playing music and stuff. Sometimes the Note4 will reconnect to T-Mobile network pretty quickly and SiriusXM resumes playing (at 2x speed like Chipmunks....it's a terrible app honestly).
I'm wondering if I need APN settings for the AT&T HSPA+ network that my phone connects to while driving. Which makes me wonder how APNs work, like does the phone detect which one it needs to use as your cellular connection changes. Or can you combine 2 APN's to help my situation somehow? Is this why people have multiple SIM cards?
Thanks!