Related
Hello
SKotreboval by som apoň originál firmware z vašich tabletov kto má tento. Na stránkach MyAudio
EN: I need original Firmware(ROM) from this tablet. On product website
Code:
ht tp:// slovensky. myaudioworld. com/mysupport/firmware/series-1016-dcc/
SK:som nasiel nejake "firmware" ktoré sú vo forme 5001.img a 5002.img avšak zverejnený oficiálny návod nefunguje (vám fungoval? ako ste postupovali?)
EN: i find some Firmware, but they are as 5001.img - but official instructions for use is bad ( was good for you? sa me how to pls)
SK:nejakým spôsobom som moj odpalil a nepomaha ani recovery.(trochu som sa hral a nemal som zalohu)
EN: I damaged original fimware(ROM), and recovery is not functional (I have no backup)
SKrípadne ak sa niekto hral s firmware a má nejaký funkčný inštalovateľný z SD a pod.....
EN: If someone has good firmware(ROM) fully functional, instalable from SD an so on. send me please.
SK:Možno by mi pomohol jednoduchý príkaz cez terminál
EN: Maybe will help command from terminal
Code:
ht tps:// docs .google. com/file/d/0BxgPttaVjg4gdklzN0tINlRCZWs/edit?usp=sharing
SK: a poslat mi komplet čo vypísal
EN: send me please what it show
Code:
dmesg
SK: Neni treba root.
EN: Root is not needed
SK: Ak chete root :
EN: If you want root:
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gdl83TFdCb0h4WWc/edit?usp=sharing
SK: Ak ho máte rootnutý tak skusiť
EN: If you have it rooted please try
ROM DUMP
Code:
htt ps:// docs. google. com/file/d/0BxgPttaVjg4gVV9nLUNnWmtDMVk/edit?usp=sharing
SK: a poslať mi vzniknutý priečinok.
EN: and send me created output folder
SK: A teraz dôvod prečo to potrebujem
Vadil mi na tablete gtalk tak som ho zmazal a spôsobilo to že už som na nom nenaštartoval system.
tak som hladal nejaku možnosť preinštalovania nakolko mi ani recovery nepomohol.
Vyskúšal som tieto Firmware alebo ROm či jak to nazvať
EN: Why i need it?
I delete Gtalk and android crashed
I try those Firmawares(ROMs) :
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gSnBsNjBScnZ5X0k/edit?usp=sharing
https://docs. google. com/file/d/0BxgPttaVjg4gZEdjTjJYQUJTT1k/edit?usp=sharing
SK:systém nabehol
dokonca aj android jelly bean
ale nefunguje dotykovka... nejak zlý ovládač alebo zle zdetekovanie.
EN: System is going, (jelly bean too) , BUT touch screen is not functional, bad driver or bad detected.
SK:Z mojho dmesg je zjavne že dotykovka proste nenabehne.. preto by možno stačil aj dmesg výpis a skúsil by som nastaviť tu inštalačku ROm tak aby nainštaloval správny ovládač.. ale neviem sa pohnúť. ak je niekto viac znalý v problematike tak prosím help.
moj dmesg vypíše:
EN: From my dmesg we see that touch screen has problems. Is there someone who can help what to do? maybe edit tryed ROMs will help.
My dmesg:
<1>[ 5.492059] wmt.sd2.param = 0:0
<1>[ 5.495873] Default wmt.sd3.param = 0:0
<1>[ 5.500390] do not have set uboot enviroment: wmt.init.rc
<7>[ 5.505914] Registered led device: lcd-backlight
<6>[ 5.510061] usbcore: registered new interface driver usbhid
<6>[ 5.515545] usbhid: USB HID core driver
<6>[ 5.520424] log enable:FF, setting:FF
<6>[ 5.524161] logger: created 256K log 'log_main'
<6>[ 5.528718] logger: created 256K log 'log_events'
<6>[ 5.533440] logger: created 64K log 'log_radio'
<6>[ 5.538052] GPS: mt3326_gps_power: Switching GPS device on
<6>[ 5.543461] GPS: mt3326_gps_power: ignore power control: 1
<6>[ 5.548913] GPS: mt3326_gps_probe: Registering chardev
<6>[ 5.554118] GPS: mt3326_gps_probe: major: 246, minor: 0
<6>[ 5.559465] GPS: mt3326_gps_probe: Done
<6>[ 5.563251] BTHWCTL: alloc bthwctl: 245:0
<6>[ 5.567733] BTHWCTL: Bluetooth hardware control driver initialized
<6>[ 5.574718] usbcore: registered new interface driver snd-usb-audio
<6>[ 5.588430] WMT_SOC: dai_name=i2s, codec_name=vt1603
<4>[ 5.596553] wmt_pdm_init: pcm_clk_src=73500
<4>[ 5.596559]
<6>[ 5.602926] VT1602: vt1602 string not found
<6>[ 5.607548] wmt.audio.i2s = vt1603:0
<6>[ 5.615507] WMT_SOC: create WMT-HWDEP 0 success
<6>[ 5.619993] mount_thread
<6>[ 5.625106] asoc: VT1603 <-> wmt-i2s.0 mapping ok
<4>[ 5.690401] buf_area = ffde0000, buf_addr = 32810000buf_area = ffd3c000, b
uf_addr = 32814000
<6>[ 5.698569] asoc: HWDAC <-> wmt-pdm.0 mapping ok
<6>[ 5.705486] ALSA device list:
<6>[ 5.708381] #0: WMT_SOC
<4>[ 5.711731] default disable oprofile
<6>[ 5.715477] nf_conntrack version 0.5.0 (12987 buckets, 51948 max)
<6>[ 5.723649] NF_TPROXY: Transparent proxy support initialized, version 4.1.
0
<6>[ 5.730528] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 5.737621] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.742955] TCP cubic registered
<6>[ 5.746714] NET: Registered protocol family 10
<6>[ 5.751925] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.757353] IPv6 over IPv4 tunneling driver
<6>[ 5.761834] NET: Registered protocol family 17
<6>[ 5.766607] NET: Registered protocol family 15
<6>[ 5.771622] Bluetooth: RFCOMM TTY layer initialized
<6>[ 5.778068] Bluetooth: RFCOMM socket layer initialized
<6>[ 5.783324] Bluetooth: RFCOMM ver 1.11
<6>[ 5.786987] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 5.792273] Bluetooth: BNEP filters: protocol multicast
<6>[ 5.797472] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.805831] L2TP core driver, V2.0
<6>[ 5.809370] PPPoL2TP kernel driver, V2.0
<6>[ 5.813204] L2TP IP encapsulation support (L2TPv3)
<6>[ 5.818205] L2TP netlink interface
<6>[ 5.821558] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 5.828702] L2TP debugfs support
<6>[ 5.832419] lib80211: common routines for IEEE802.11 drivers
<7>[ 5.838542] lib80211_crypt: registered algorithm 'NULL'
<6>[ 5.838552] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t 9 rev 3
<6>[ 5.847145] ThumbEE CPU extension supported.
<5>[ 5.851866] Registering SWP/SWPB emulation handler
<6>[ 5.858031] input: kpadPower as /devices/virtual/input/input0
<4>[ 5.865118] [wmt_pm_init] id = 0x0, act = 0x1, bitmap = 0x6, ctl = 0xfe110
042, oc = 0xfe110082, od = 0xfe1100c2
<4>[ 5.875889] [wmt_pm_init] var define var_wake_en=1 var_wake_param=408001
<4>[ 5.882677] [wmt_pm_init] battery_used = 3
<6>[ 5.887464] PMC: WonderMedia Power Management driver
<4>[ 5.892537] PMC: Power button is configured as soft power
<4>[ 5.898238] [wmt_pm_init] power_on = 100 resume = 100 power_up = 100
<6>[ 5.905367] Can not find uboot env wmt.misc.param
<4>[ 5.910110] SD0 Host Clock 382812Hz
<6>[ 5.914246] Mali DRM initialize, driver name: mali_drm, version 2.1
<6>[ 5.920710] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
<4>[ 5.927980] Vt1609 touchscreen driver disabled.
<6>[ 5.934359] wmt-rtc wmt-rtc.0: setting system clock to 2013-03-06 13:51:31
UTC (1362577891)
<6>[ 5.943968] Freeing init memory: 180K
<4>[ 5.951254] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oo
m_score_adj instead.
<6>[ 6.043877] yaffs: dev is 32505866 name is "mtdblock10" rw
<6>[ 6.049288] yaffs: passed flags ""
<7>[ 6.052655] yaffs: yaffs: Attempting MTD mount of 31.10,"mtdblock10"
<7>[ 6.120439] yaffs: yaffs_read_super: is_checkpointed 1
<6>[ 6.120743] yaffs: dev is 32505868 name is "mtdblock12" rw
<6>[ 6.126153] yaffs: passed flags ""
<7>[ 6.129521] yaffs: yaffs: Attempting MTD mount of 31.12,"mtdblock12"
<7>[ 6.213933] yaffs: block 191 is bad
<7>[ 6.763771] yaffs: yaffs_read_super: is_checkpointed 0
<6>[ 6.763954] yaffs: dev is 32505867 name is "mtdblock11" rw
<6>[ 6.769369] yaffs: passed flags ""
<7>[ 6.772737] yaffs: yaffs: Attempting MTD mount of 31.11,"mtdblock11"
<7>[ 6.776632] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 6.801544] Uncor Ecc Err 0_th, on page 0x13828 fail., cur_try_time=-1
<4>[ 6.809506] Uncor Ecc Err 1_th, on page 0x13828 fail., cur_try_time=0
<4>[ 6.817395] read retry PASS cur_try_times=1
<4>[ 6.825528] Uncor Ecc Err 0_th, on page 0x13827 fail., cur_try_time=1
<4>[ 6.833413] read retry PASS cur_try_times=2
<4>[ 6.841893] Uncor Ecc Err 0_th, on page 0x1382a fail., cur_try_time=2
<4>[ 6.849840] Uncor Ecc Err 1_th, on page 0x1382a fail., cur_try_time=3
<4>[ 6.856956] read retry PASS cur_try_times=4
<4>[ 6.890837] UMP: UMP device driver loaded
<4>[ 6.934001] Mali: Mali device driver loaded
<6>[ 7.075362] [wmt-vd] WonderMedia HW decoder driver inited
<6>[ 7.084773] [wmt-lock] init ok, major=242, minor=1
<6>[ 7.097948] [wmt-vd] jdec Request IRQ 64 Ok.
<6>[ 7.102145] [wmt-vd] jdec registered major 236 minor 1
<6>[ 7.111142] [wmt-vd] mpeg2 registered major 236 minor 2
<6>[ 7.120189] [wmt-vd] mpeg4 registered major 236 minor 3
<6>[ 7.129287] [wmt-vd] divx registered major 236 minor 4
<6>[ 7.138294] [wmt-vd] h263 registered major 236 minor 8
<6>[ 7.167623] [wmt-vd] h264 registered major 236 minor 5
<6>[ 7.175695] [wmt-vd] vc1 registered major 236 minor 7
<6>[ 7.183105] [wmt-vd] rv registered major 236 minor 6
<6>[ 7.206193] [wmt-vd] vpx Request IRQ 88 Ok.
<6>[ 7.210310] [wmt-vd] vpx registered major 236 minor 9
<7>[ 7.221249] [wmt-ve] videoencoder_init: create video encoder proc
<4>[ 7.221261] start register videoencoder_driver
<4>[ 7.225967] *****NOW start videoencoder probe function!!*****
<6>[ 7.231852] [wmt-ve] veinfo.prdt_virt =0xffd00000,veinfo.prdt_phys =0x32a6
0000
<6>[ 7.238998] [wmt-ve] prob /dev/wmt-ve major 236, minor 0, prdt ffd00000/32
a60000, size 100 KB
<4>[ 7.247486] register videoencoder_driver done
<6>[ 7.251805] [wmt-ve] WonderMedia HW encoder driver inited
<6>[ 7.264022] [wmt-ve] encoder->irq_num = 87,encoder->isr = 0xbf0a62a8
<6>[ 7.270413] [wmt-ve] wmt-h264enc Request IRQ 87 Ok.
<6>[ 7.275237] [wmt-ve] wmt-h264enc registered major 236 minor 18
<4>[ 7.318073] wmt_vid_i2c_probe()
<3>[ 7.325354] WonderMedia CMOS camera register OK
<4>[ 7.657136] Uncor Ecc Err 0_th, on page 0x27ff0 fail., cur_try_time=4
<4>[ 7.665092] read retry PASS cur_try_times=5
<4>[ 7.689184] Uncor Ecc Err 0_th, on page 0x27fee fail., cur_try_time=5
<4>[ 7.697484] Uncor Ecc Err 1_th, on page 0x27fee fail., cur_try_time=6
<4>[ 7.705109] read retry PASS cur_try_times=-1
<3>[ 7.717347] init: try to config ril modem type...
<3>[ 7.721823] init: ril is not enable...Uncor Ecc Err 0_th, on page 0x2573c
fail., cur_try_time=-1
<4>[ 7.769700] Uncor Ecc Err 1_th, on page 0x2573c fail., cur_try_time=0
<4>[ 7.777596] read retry PASS cur_try_times=1
<3>[ 7.989003] init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
<3>[ 8.233007] init: cannot find '/system/etc/init.sh', disabling 'system_ini
t'
<3>[ 8.350094] android_usb: already disabled
<6>[ 8.354709] adb_bind_config
<6>[ 8.357444] usb_ep_autoconfig try to find ep1in-bulk
<6>[ 8.362447] usb_ep_autoconfig found ep1in-bulk
<6>[ 8.366953] usb_ep_autoconfig try to find ep2out-bulk
<6>[ 8.372070] usb_ep_autoconfig found ep2out-bulk
<6>[ 8.376846] udc: gri wmt_pullup()
<6>[ 8.380088] udc: gri pullup_enable()
<6>[ 8.385135] warning: `adbd' uses 32-bit capabilities (legacy support in us
e)
<6>[ 8.392382] adb_open
<6>[ 8.555107] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 8.638176] android_usb gadget: high speed config #1: android
<6>[ 8.643884] rndis ooooo 24
<6>[ 8.646556] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 8.906307] rndis xxxxx 24
<6>[ 9.350776] usbcore: registered new interface driver cdc_acm
<6>[ 9.356380] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
<6>[ 9.469677] USB Serial support registered for GSM modem (1-port)
<6>[ 9.475907] usbcore: registered new interface driver option
<6>[ 9.481418] option: v0.7.2:USB Driver for GSM modems
<1>[ 9.535094] [is_mc32x0]: Find mc3230(mCube g-sensor).
<6>[ 9.542536] input: g-sensor as /devices/virtual/input/input1
<4>[ 9.567353] offser gain = 482 474 418 528 256 688======================
<4>[ 9.567361]
<4>[ 9.567364] ft5406-touch reslx=600, resly=1024, Interrupt GP1, bit1, Rese
t GP0, bit4
<6>[ 9.768922] input: ft5406-touch as /devices/virtual/input/input2
<4>[ 9.793322] ERR:ft5x0x_i2c_rxdata_67:msg i2c read error: -5
<4>[ 9.798824] ERR:ft5x0x_read_data_157:read_data i2c_rxdata failed: -5
<1>[ 9.986959] [dump_kpad_devinfo]: =========================================
==========
<1>[ 9.994639] [dump_kpad_devinfo]: kpad id:baseboard devnum:1
<1>[ 10.000172] [dump_kpad_devinfo]: dev[0] type:rc_1
<1>[ 10.005104] [dump_kpad_devinfo]:
<1>[ 10.008390] [dump_kpad_devinfo]: key number:5
<1>[ 10.012810] [dump_kpad_devinfo]: key0:9e(158),
<1>[ 10.017152] [dump_kpad_devinfo]: key1:8b(139),
<1>[ 10.021655] [dump_kpad_devinfo]: key2:73(115),
<1>[ 10.026157] [dump_kpad_devinfo]: key3:72(114),
<1>[ 10.030666] [dump_kpad_devinfo]: key4:66(102),
<1>[ 10.035167] [dump_kpad_devinfo]:
<1>[ 10.038638] [dump_kpad_devinfo]: longkey num:0
<1>[ 10.043142] [dump_kpad_devinfo]: =========================================
==========
<6>[ 10.053519] input: keypad as /devices/virtual/input/input3
<4>[ 10.430673] fan GEIO_STOP_LOGO
<6>[ 10.433659] [Boot Animation] animation_stop
<4>[ 10.776949] [VPP] rx user pid 0x55
<4>[ 12.439302] mc_write:3--0
<4>[ 12.442012] mc_write:3--0
<4>[ 12.520929] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.527775] cmos_init_gc0308 2560 1936
<4>[ 12.626609] cmos_release()
<4>[ 12.629423] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.659689] cmos_init_yacd511 2560 1936
<4>[ 12.663553] cmos_release()
<6>[ 12.932817] [INFO] VPU Firmware Version =>
<6>[ 12.932823] product : | version : 0002.0000.00000008
<6>[ 12.932829]
<6>[ 12.947243] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 12.954723] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 13.060117] mc_write:3--5
<6>[ 13.064871] [INFO] VPU Firmware Version =>
<6>[ 13.064877] product : | version : 0002.0000.00000008
<6>[ 13.064883]
<6>[ 13.079297] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 13.086704] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 22.439434] Uncor Ecc Err 0_th, on page 0x2567e fail., cur_try_time=1
<4>[ 22.447430] Uncor Ecc Err 1_th, on page 0x2567e fail., cur_try_time=2
<4>[ 22.455322] read retry PASS cur_try_times=3
<1>[ 33.393832] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<4>[ 33.399504] skip adjust backlight at the first time
<4>[ 33.404539] mc_write:1--0
<6>[ 33.419512] request_suspend_state: wakeup (3->0) at 33849036002 (2013-03-0
6 13:51:58.986161334 UTC)
<1>[ 33.430339] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 154
<4>[ 33.440196] mc_write:1--60
<6>[ 34.008832] acc_open
<6>[ 34.011157] acc_release
<4>[ 34.303820] Uncor Ecc Err 0_th, on page 0x25800 fail., cur_try_time=3
<4>[ 34.310838] read retry PASS cur_try_times=4
<4>[ 40.754027] mc_write:3--0
<3>[ 40.778421] binder: release proc 162, transaction 90, not freed
<3>[ 40.784294] binder: release proc 162, transaction 5047, not freed
<6>[ 40.884850] yaffs: dev is 32505869 name is "mtdblock13" rw
<6>[ 40.890290] yaffs: passed flags ""
<7>[ 40.893639] yaffs: yaffs: Attempting MTD mount of 31.13,"mtdblock13"
<7>[ 41.008158] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 44.126783] Uncor Ecc Err 0_th, on page 0x27fbc fail., cur_try_time=4
<4>[ 44.275513] read retry PASS cur_try_times=5
<4>[ 44.493885] Uncor Ecc Err 0_th, on page 0x27fbe fail., cur_try_time=5
<4>[ 44.524878] Uncor Ecc Err 1_th, on page 0x27fbe fail., cur_try_time=6
<4>[ 44.533376] read retry PASS cur_try_times=-1
<4>[ 46.592229] Uncor Ecc Err 0_th, on page 0x43944 fail., cur_try_time=-1
<4>[ 46.610250] Uncor Ecc Err 1_th, on page 0x43944 fail., cur_try_time=0
<4>[ 46.630067] read retry PASS cur_try_times=1
<4>[ 46.910741] Uncor Ecc Err 0_th, on page 0x43946 fail., cur_try_time=1
<4>[ 46.918700] Uncor Ecc Err 1_th, on page 0x43946 fail., cur_try_time=2
<4>[ 46.926723] read retry PASS cur_try_times=3
<4>[ 48.368608] Uncor Ecc Err 0_th, on page 0x25900 fail., cur_try_time=3
<4>[ 48.376529] read retry PASS cur_try_times=4
<4>[ 333.801387] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=4
<4>[ 333.809262] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=5
<4>[ 333.817127] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=6
<4>[ 333.824996] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=-1
<4>[ 333.832908] read retry PASS cur_try_times=0
<4>[ 333.840808] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=0
<4>[ 333.848720] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=1
<4>[ 333.856625] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=2
<4>[ 333.864500] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=3
<4>[ 333.871615] read retry PASS cur_try_times=4
<1>[ 633.830513] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 150
<4>[ 633.836406] mc_write:1--58
<1>[ 633.846984] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 147
<4>[ 633.852891] mc_write:1--57
<1>[ 633.866863] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 144
<4>[ 633.872757] mc_write:1--56
<1>[ 633.886870] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 141
<4>[ 633.894230] mc_write:1--55
<1>[ 633.903615] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 138
<4>[ 633.909819] mc_write:1--54
<1>[ 633.920203] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 135
<4>[ 633.926096] mc_write:1--52
<1>[ 633.936835] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 132
<4>[ 633.942719] mc_write:1--51
<1>[ 633.953646] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 129
<4>[ 633.959562] mc_write:1--50
<1>[ 633.970201] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 126
<4>[ 633.976094] mc_write:1--49
<1>[ 633.986882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 123
<4>[ 633.992769] mc_write:1--48
<1>[ 634.006991] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 120
<4>[ 634.013487] mc_write:1--47
<1>[ 634.026882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 117
<4>[ 634.032772] mc_write:1--45
<1>[ 634.046842] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 114
<4>[ 634.054196] mc_write:1--44
<1>[ 634.063611] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 111
<4>[ 634.069806] mc_write:1--43
<1>[ 634.080537] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 108
<4>[ 634.086431] mc_write:1--42
<1>[ 634.096848] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 105
<4>[ 634.102729] mc_write:1--41
<1>[ 634.113656] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 102
<4>[ 634.119662] mc_write:1--40
<1>[ 634.130198] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 100
<4>[ 634.136083] mc_write:1--39
<1>[ 641.271927] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<1>[ 641.277631] [lcd_brightness]lcd turn off <--
<4>[ 641.283652] mc_write:1--0
<6>[ 641.292736] request_suspend_state: sleep (0->3) at 641722369336 (2013-03-0
6 14:02:06.859382668 UTC)
<4>[ 641.405636] -------------> do auto suspend
<3>[ 2132.167123] init: untracked pid 1061 exited
[email protected]:/ $
Click to expand...
Click to collapse
SK:dikes
ENG:thank you
ROM
SK:
Dnes som nasiel origo ROM
Ale nepodarilo sa mi to nahodit ani podla instrukcii
ENG: Today I find original shipped ROM. But, I have problem with upgrade it by the instructions.
Anyone knowns how to make jelly bean working?
Any one?..
Hey guys,
I just need your opinion or some ideas.
I was wondering why my galaxy s3 was locking up, so I took a look into the kernel output.
So the malfunction is: Phone locks up, no reaction to any key pressing and so on, but I can reboot it by holding the power button.
By having a ssh connection to my phone I can see that when the phone "locks" up the kernel is still living. So there is no kernel panic or what so ever.
After that I got curious, will the lock up go away? And yes, it did. After 30 minutes or so. And after that the phone was working without problems again. Here is the relevant log output of the kernel (/proc/kmesg):
Code:
<3>[26695.166202] c0 mmc0: Timeout waiting for hardware interrupt.
<7>[26695.166317] c0 mshci: ============== REGISTER DUMP ==============
<7>[26695.166440] c0 mshci: MSHCI_CTRL: 0x00000010
<7>[26695.166534] c0 mshci: MSHCI_PWREN: 0x00000001
<7>[26695.166628] c0 mshci: MSHCI_CLKDIV: 0x00000001
<7>[26695.166723] c0 mshci: MSHCI_CLKSRC: 0x00000000
<7>[26695.166814] c0 mshci: MSHCI_CLKENA: 0x00000000
<7>[26695.166907] c0 mshci: MSHCI_TMOUT: 0xffffffff
<7>[26695.167004] c0 mshci: MSHCI_CTYPE: 0x00010000
<7>[26695.167100] c0 mshci: MSHCI_BLKSIZ: 0x00000200
<7>[26695.167192] c0 mshci: MSHCI_BYTCNT: 0x0000f000
<7>[26695.167288] c0 mshci: MSHCI_INTMSK: 0x0000bfce
<7>[26695.167380] c0 mshci: MSHCI_CMDARG: 0x00010000
<7>[26695.167472] c0 mshci: MSHCI_CMD: 0x80202000
<7>[26695.167574] c0 mshci: MSHCI_MINTSTS: 0x00000000
<7>[26695.167666] c0 mshci: MSHCI_RINTSTS: 0x00000030
<7>[26695.167757] c0 mshci: MSHCI_STATUS: 0x01fe6b01
<7>[26695.167860] c0 mshci: MSHCI_FIFOTH: 0x503f0040
<7>[26695.167954] c0 mshci: MSHCI_CDETECT: 0x00000001
<7>[26695.168045] c0 mshci: MSHCI_WRTPRT: 0x00000001
<7>[26695.168145] c0 mshci: MSHCI_GPIO: 0x00000000
<7>[26695.168238] c0 mshci: MSHCI_TCBCNT: 0x00007800
<7>[26695.168331] c0 mshci: MSHCI_TBBCNT: 0x0000f0d8
<7>[26695.168432] c0 mshci: MSHCI_DEBNCE: 0x000fffff
<7>[26695.168523] c0 mshci: MSHCI_USRID: 0xffffffff
<7>[26695.168615] c0 mshci: MSHCI_VERID: 0x5342240a
<7>[26695.168717] c0 mshci: MSHCI_HCON: 0x00e424c1
<7>[26695.168811] c0 mshci: MSHCI_UHS_REG: 0x00010000
<7>[26695.168904] c0 mshci: MSHCI_BMOD: 0x00000582
<7>[26695.169000] c0 mshci: MSHCI_PLDMND: 0x00000000
<7>[26695.169090] c0 mshci: MSHCI_DBADDR: 0x6bee0000
<7>[26695.169182] c0 mshci: MSHCI_IDSTS: 0x00000000
<7>[26695.169282] c0 mshci: MSHCI_IDINTEN: 0x00000000
<7>[26695.169374] c0 mshci: MSHCI_DSCADDR: 0x6bee00e0
<7>[26695.169465] c0 mshci: MSHCI_BUFADDR: 0x00000000
<7>[26695.169564] c0 mshci: MSHCI_WAKEUPCON: 0x00000000
<7>[26695.169658] c0 mshci: MSHCI_CLOCKCON: 0x00000000
<7>[26695.169751] c0 mshci: MSHCI_FIFODAT: 0x00000000
<7>[26695.169845] c0 mshci: ===========================================
<3>[26695.170166] c0 mmcblk0: error -110 sending status command, aborting
<3>[26695.170367] c0 end_request: I/O error, dev mmcblk0, sector 22589728
<3>[26695.170540] c0 Buffer I/O error on device mmcblk0p12, logical block 2000420
<4>[26695.170747] c0 EXT4-fs warning (device mmcblk0p12): ext4_end_bio:258: I/O error writing to inode 65490 (offset 12288 size 4096 starting block 2823717)
<3>[26695.171109] c0 CMD aborting case in MMC's block layer ret 0.
<3>[26695.171271] c0 mmcblk0: CMD25, ARG=0x158b120.
<3>[26695.171370] c0 packed CMD type = 0.
<3>[26695.171461] c0 mmc0, request returns 4.
And here is the part I am concerned about: My internal memory is faulty! mmcblk0p12 belongs to /data and truely speaking this is not good!
Code:
/dev/block/mmcblk0p12 /data ext4 rw,nosuid,nodev,noatime,barrier=1,journal_async_commit,data=ordered,noauto_da_alloc,discard 0 0
Normaly the system shouldn't notice any defect sectors (because the hardware has some spare sectors and remaps the request to them) so I think I have serious trouble here.
What do you think? Do you agree on that assumption?
Have you read the sds and unusual freezing threads?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Have you read the sds and unusual freezing threads?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the hint. It is a good starting point...
I switched to CM 10.1.3 RC2 and I still have the same problem with the same partition (see first post). As far as I know the Samsung eMMC bug should be fixed as it is included in the vanilla linux kernel.
Any ideas?
The bug is fixed the freezing is not.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Hi XDA community
I have a weird problem on my S3
I can't use Camera with Custom Kernels on Sammy (Samsung) based ROMs (I tried Googy-Max and Boeffla kernel). When I try to access to Camera, applications says "Camera Failed" or "Failed to connect Camera". If I use stock kernel with sammy based ROMs, I can use camera.
And also, I haven't got any problem in CyanogenMod based ROM with custom kernel (Googy-Max).
Here is the last lines of dmesg when I try to access to camera;
Code:
<6>[ 276.325203] c0 [TSP] DVFS On![8]
<5>[ 276.352810] c0 melfas-ts 3-0048: finger [0] up, palm 0
<6>[ 276.388363] c0 lcd panel: brightness=30, bl=1, candela=30
<6>[ 276.394264] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
<6>[ 276.394306] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
<6>[ 276.394408] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
<6>[ 276.394449] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
<6>[ 276.394488] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
<6>[ 276.394796] c0 I:P:[email protected] Total=16384 PrdSz=4096 #Prds=4 dma_area=0xf4270000
<6>[ 276.395901] c3 wm8994-codec wm8994-codec: write 3d = 2f
<6>[ 276.396106] c0 wm8994-codec wm8994-codec: write 3e = 27
<6>[ 276.396318] c3 wm8994-codec wm8994-codec: write 38 = 80
<6>[ 276.396515] c0 wm8994-codec wm8994-codec: write 3 = 3c00
<6>[ 276.396706] c0 wm8994-codec wm8994-codec: write 39 = 1ee
<6>[ 276.396896] c0 wm8994-codec wm8994-codec: write 1 = 3
<6>[ 276.450402] c0 [TSP] DVFS Off!
<6>[ 276.450447] c0 wm8994-codec wm8994-codec: write 39 = 18c
<6>[ 276.450654] c0 wm8994-codec wm8994-codec: write 2 = 6000
<6>[ 276.450845] c0 wm8994-codec wm8994-codec: write 208 = 1a
<6>[ 276.452292] c0 wm8994-codec wm8994-codec: write 5 = 303
<6>[ 276.452492] c0 wm8994-codec wm8994-codec: write 3 = 3f30
<6>[ 276.452691] c0 wm8994-codec wm8994-codec: write 3 = 3ff0
<6>[ 276.452892] c0 wm8994-codec wm8994-codec: write 1 = 3003
<6>[ 276.453113] c0 wm8994-codec wm8994-codec: write 3 = 33f0
<6>[ 276.454363] c0 wm8994-codec wm8994-codec: write 15 = 0
<6>[ 276.454578] c0 wm8994-codec wm8994-codec: write 420 = 0
<7>[ 276.455292] c0 i2s_txctrl:Turn on
<6>[ 276.488590] c0 lcd panel: brightness=41, bl=2, candela=40
<6>[ 276.521833] c0 lcd panel: brightness=50, bl=3, candela=50
<6>[ 276.654188] c0 cm36651_work_func_light, red = 109 green = 82 blue = 42 white = 122
<4>[ 276.668636] c3 s3c-fimc0: FIMC0 1 opened.
<7>[ 276.671789] c3 s5c73m3_probe
<7>[ 276.672223] c3 s5c73m3_power_on: in
<7>[ 276.672246] c3 s5c73m3 vddCore : 1100000
<4>[ 276.707655] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 276.707692] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 276.707723] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 276.737748] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 276.743783] c0 s5c73m3_get_af_cal_version: Cal_Device = 0x7bfdcb2d, Cal_DLL = 0xaae44d9f
<7>[ 276.747932] c0 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 276.747992] c0 s5c73m3_power_down: in
<6>[ 276.771564] c0 lcd panel: brightness=62, bl=4, candela=60
<6>[ 276.788274] c0 lcd panel: brightness=76, bl=5, candela=70
<6>[ 276.838325] c0 lcd panel: brightness=83, bl=6, candela=80
<4>[ 276.853203] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<6>[ 276.854938] c0 lcd panel: brightness=90, bl=7, candela=90
<4>[ 276.858011] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 276.858116] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 276.858161] c0 s5c73m3_power_on: in
<7>[ 276.858185] c0 s5c73m3 vddCore : 1100000
<4>[ 276.898340] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<6>[ 276.905002] c0 lcd panel: brightness=100, bl=8, candela=100
<6>[ 276.921645] c0 lcd panel: brightness=105, bl=10, candela=104
<6>[ 276.954938] c0 lcd panel: brightness=108, bl=12, candela=108
<6>[ 276.988237] c0 lcd panel: brightness=116, bl=13, candela=110
<6>[ 277.021637] c0 lcd panel: brightness=120, bl=14, candela=120
<3>[ 277.070368] c0 [HOTPLUG IN] check_up 1400000>=500000 && 390>200
<3>[ 277.070433] c0 CPU_UP 1
<4>[ 277.075267] c1 CPU1: Booted secondary processor
<6>[ 277.075332] c1 notifier_call_chain : NOTIFY BAD tick_notify
<6>[ 277.080053] c1 Switched to NOHz mode on CPU #1
<7>[ 277.347577] c3 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 277.360953] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 277.361009] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 277.430073] c3 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 277.430142] c3 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 277.430597] c3 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 277.430676] c3 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 277.430744] c3 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 277.430785] c3 s5c73m3_check_fw: i2c failed, err -22
<7>[ 277.430817] c3 s5c73m3_init: isp.bad_fw is true
<3>[ 277.430854] c3 s5c73m3_init: i2c failed, err -22
<7>[ 277.430893] c3 s5c73m3_power_down: in
<4>[ 277.469209] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 277.469410] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 277.469442] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 277.570142] c0 s3c-fimc0: Retry power on(1/3)
<3>[ 277.570172] c0
<7>[ 277.570203] c0 s5c73m3_power_on: in
<7>[ 277.570236] c0 s5c73m3 vddCore : 1100000
<4>[ 277.587394] c3 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 277.587461] c3 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 277.587518] c3 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 277.613817] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 277.617854] c3 s5c73m3_get_af_cal_version: Cal_Device = 0x7bbdcb2d, Cal_DLL = 0x22e44d9f
<7>[ 277.623486] c0 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 277.623596] c0 s5c73m3_power_down: in
<4>[ 277.665259] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 277.665512] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 277.665568] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 277.665626] c0 s5c73m3_power_on: in
<7>[ 277.665663] c0 s5c73m3 vddCore : 1100000
<4>[ 277.681156] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 278.091274] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 278.102394] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 278.102440] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 278.170062] c1 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 278.170114] c1 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 278.170332] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 278.170369] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 278.170407] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 278.170438] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 278.170464] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 278.170491] c0 s5c73m3_init: i2c failed, err -22
<7>[ 278.170521] c0 s5c73m3_power_down: in
<4>[ 278.204486] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 278.204743] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 278.204797] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 278.305271] c0 s3c-fimc0: Retry power on(2/3)
<3>[ 278.305328] c0
<7>[ 278.305402] c0 s5c73m3_power_on: in
<7>[ 278.305471] c0 s5c73m3 vddCore : 1100000
<4>[ 278.322980] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 278.323023] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 278.323062] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 278.339376] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 278.342579] c0 s5c73m3_get_af_cal_version: Cal_Device = 0x7bfdcb2d, Cal_DLL = 0x1ae44d9f
<7>[ 278.344412] c0 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 278.344468] c0 s5c73m3_power_down: in
<4>[ 278.377010] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 278.377206] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 278.377239] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 278.377273] c0 s5c73m3_power_on: in
<7>[ 278.377298] c0 s5c73m3 vddCore : 1100000
<4>[ 278.391573] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 278.802462] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 278.814234] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 278.814286] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 278.880112] c1 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 278.880208] c1 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 278.880653] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 278.880715] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 278.880773] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 278.880828] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 278.880875] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 278.880917] c0 s5c73m3_init: i2c failed, err -22
<7>[ 278.880963] c0 s5c73m3_power_down: in
<4>[ 278.917260] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 278.917511] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 278.917565] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 279.020126] c1 s3c-fimc0: Retry power on(3/3)
<3>[ 279.020170] c1
<7>[ 279.020212] c1 s5c73m3_power_on: in
<7>[ 279.020253] c1 s5c73m3 vddCore : 1100000
<4>[ 279.035238] c1 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 279.035278] c1 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 279.035310] c1 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 279.049503] c3 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 279.052394] c3 s5c73m3_get_af_cal_version: Cal_Device = 0x7bfdcb2d, Cal_DLL = 0x22e44d9f
<7>[ 279.055958] c3 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 279.056014] c3 s5c73m3_power_down: in
<4>[ 279.088649] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 279.088822] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 279.088847] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 279.088875] c0 s5c73m3_power_on: in
<7>[ 279.088893] c0 s5c73m3 vddCore : 1100000
<4>[ 279.102944] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 279.462221] c1 i2s_txctrl: Turn Off - spr is no active
<6>[ 279.462262] c1 wm8994-codec wm8994-codec: write 420 = 200
<6>[ 279.462459] c1 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
<6>[ 279.462490] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
<7>[ 279.513019] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 279.524195] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 279.524241] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 279.590032] c3 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 279.590074] c3 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 279.590268] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 279.590297] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 279.590325] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 279.590352] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 279.590376] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 279.590398] c0 s5c73m3_init: i2c failed, err -22
<7>[ 279.590421] c0 s5c73m3_power_down: in
<4>[ 279.623632] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 279.623849] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 279.623890] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 279.623933] c0 s3c-fimc0: Camera power/init failed!!!!
<3>[ 279.623963] c0
<3>[ 279.623987] c0 s3c-fimc0: fimc_runtime_suspend : invalid fimc control
<3>[ 279.624239] c0 s3c-fimc0: fimc_configure_subdev: fail to initialize subdev
<3>[ 279.624355] c0 s5c73m3_remove: camera is not ready!!
<3>[ 279.624830] c0 s3c-fimc0: fimc_s_input: Could not register camera sensor with V4L2.
<4>[ 279.625113] c0 s3c-fimc0: FIMC0 0 released.
<4>[ 279.834038] c3 s3c-fimc0: FIMC0 1 opened.
<7>[ 279.838480] c0 s5c73m3_probe
<7>[ 279.839113] c0 s5c73m3_power_on: in
<7>[ 279.839176] c0 s5c73m3 vddCore : 1100000
<4>[ 279.854931] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 279.855086] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 279.855180] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 279.880593] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 279.885959] c0 s5c73m3_get_af_cal_version: Cal_Device = 0x7bfdcb29, Cal_DLL = 0x22e04d9f
<7>[ 279.891421] c0 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 279.891474] c0 s5c73m3_power_down: in
<4>[ 279.924538] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 279.924710] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 279.924736] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 279.924764] c0 s5c73m3_power_on: in
<7>[ 279.924781] c0 s5c73m3 vddCore : 1100000
<4>[ 279.938832] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 280.348995] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 280.360108] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 280.360153] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 280.430039] c3 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 280.430081] c3 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 280.430287] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 280.430315] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 280.430344] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 280.430371] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 280.430395] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 280.430416] c0 s5c73m3_init: i2c failed, err -22
<7>[ 280.430440] c0 s5c73m3_power_down: in
<6>[ 280.462058] c1 wm8994-codec wm8994-codec: write 1 = 3
<6>[ 280.462285] c1 wm8994-codec wm8994-codec: write 3 = 3f0
<6>[ 280.462502] c1 wm8994-codec wm8994-codec: write 3 = 330
<6>[ 280.462720] c1 wm8994-codec wm8994-codec: write 3 = 0
<6>[ 280.462935] c1 wm8994-codec wm8994-codec: write 5 = 300
<4>[ 280.464164] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 280.464409] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 280.464454] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<6>[ 280.464661] c1 wm8994-codec wm8994-codec: write 3 = 3000
<6>[ 280.464900] c1 wm8994-codec wm8994-codec: write 3 = 3c00
<6>[ 280.465141] c1 wm8994-codec wm8994-codec: write 39 = 18f
<6>[ 280.465378] c1 wm8994-codec wm8994-codec: write 37 = 81
<6>[ 280.465613] c1 wm8994-codec wm8994-codec: write 38 = b0
<3>[ 280.565126] c0 s3c-fimc0: Retry power on(1/3)
<3>[ 280.565183] c0
<7>[ 280.565239] c0 s5c73m3_power_on: in
<7>[ 280.565299] c0 s5c73m3 vddCore : 1100000
<4>[ 280.581615] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 280.581713] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 280.581802] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 280.607965] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 280.613378] c0 s5c73m3_get_af_cal_version: Cal_Device = 0x7bbdcb2d, Cal_DLL = 0x3ae44d9f
<7>[ 280.618882] c3 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 280.619011] c3 s5c73m3_power_down: in
<6>[ 280.620201] c1 wm8994-codec wm8994-codec: write 3 = 0
<6>[ 280.620606] c1 wm8994-codec wm8994-codec: write 37 = 80
<6>[ 280.620993] c1 wm8994-codec wm8994-codec: write 39 = 181
<6>[ 280.621309] c1 wm8994-codec wm8994-codec: write 1 = 0
<6>[ 280.621521] c1 wm8994-codec wm8994-codec: write 2 = 2000
<6>[ 280.621734] c1 wm8994-codec wm8994-codec: write 208 = a
<6>[ 280.621972] c3 wm8994-codec wm8994-codec: write 15 = 40
<6>[ 280.622166] c3 wm8994-codec wm8994-codec: write 3d = 3f
<6>[ 280.622357] c3 wm8994-codec wm8994-codec: write 3e = 37
<4>[ 280.653105] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 280.653290] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 280.653327] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 280.653367] c0 s5c73m3_power_on: in
<7>[ 280.653391] c0 s5c73m3 vddCore : 1100000
<4>[ 280.667626] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 281.076954] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 281.088096] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 281.088140] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 281.155062] c1 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 281.155107] c1 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 281.155317] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 281.155347] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 281.155375] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 281.155402] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 281.155426] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 281.155448] c0 s5c73m3_init: i2c failed, err -22
<7>[ 281.155472] c0 s5c73m3_power_down: in
<4>[ 281.188526] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 281.188704] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 281.188730] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 281.290243] c0 s3c-fimc0: Retry power on(2/3)
<3>[ 281.290300] c0
<7>[ 281.290375] c0 s5c73m3_power_on: in
<7>[ 281.290446] c0 s5c73m3 vddCore : 1100000
<4>[ 281.307308] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 281.307405] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 281.307492] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 281.333269] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 281.336535] c0 s5c73m3_get_af_cal_version: Cal_Device = 0x7bbdcb2d, Cal_DLL = 0x22e44d9f
<7>[ 281.338519] c1 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 281.338573] c1 s5c73m3_power_down: in
<4>[ 281.371084] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 281.371276] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 281.371309] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 281.371344] c0 s5c73m3_power_on: in
<7>[ 281.371366] c0 s5c73m3 vddCore : 1100000
<4>[ 281.385639] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 281.794634] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 281.805819] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 281.805873] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 281.875081] c0 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 281.875142] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 281.875312] c3 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 281.875349] c3 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 281.875384] c3 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 281.875418] c3 s5c73m3_check_fw: i2c failed, err -22
<7>[ 281.875448] c3 s5c73m3_init: isp.bad_fw is true
<3>[ 281.875474] c3 s5c73m3_init: i2c failed, err -22
<7>[ 281.875501] c3 s5c73m3_power_down: in
<4>[ 281.890129] c0 [email protected] 9
<4>[ 281.908748] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 281.908923] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 281.908952] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 282.010122] c0 s3c-fimc0: Retry power on(3/3)
<3>[ 282.010165] c0
<7>[ 282.010205] c0 s5c73m3_power_on: in
<7>[ 282.010245] c0 s5c73m3 vddCore : 1100000
<4>[ 282.025939] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 282.026008] c0 s5c73m3_init: vdd core value from OTP : 1.05V
<7>[ 282.026069] c0 s5c73m3_init: chip info from OTP : 0x1184, 0x6fad, 0xa0e4
<7>[ 282.047737] c1 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0
<7>[ 282.051090] c3 s5c73m3_get_af_cal_version: Cal_Device = 0x7bfdcb2d, Cal_DLL = 0xaae44d9f
<7>[ 282.056629] c1 s5c73m3_get_phone_fw_version: can't open BHFJ02 Ver. Firmware. so, download from F-ROM
<7>[ 282.056783] c1 s5c73m3_power_down: in
<4>[ 282.091531] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 282.091788] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 282.091843] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<7>[ 282.091903] c0 s5c73m3_power_on: in
<7>[ 282.091941] c0 s5c73m3 vddCore : 1100000
<4>[ 282.108014] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON
<7>[ 282.518842] c0 s5c73m3_get_sensor_fw_binary: sent SPI ready CMD
<6>[ 282.530086] c0 s3c-pl330 s3c-pl330.2: Reset Channel-1 CS-20000f FTC-2000
<3>[ 282.530132] c0 s3c64xx-spi s3c64xx-spi.1: DmaAbrtTx-65536
<3>[ 282.600040] c1 s5c73m3_spi spi1.0: I/O Error: rx-1 tx-1 res:rx-f tx-f len-65536
<3>[ 282.600082] c1 s3c64xx-spi s3c64xx-spi.1: DmaAbrtRx-65536
<3>[ 282.600288] c0 s5c73m3_spi spi1.0: spi_xmit_rx - error -5
<3>[ 282.600317] c0 s5c73m3_get_sensor_fw_binary: i2c failed, err -22
<3>[ 282.600345] c0 s5c73m3_get_phone_fw_version: i2c failed, err -22
<3>[ 282.600372] c0 s5c73m3_check_fw: i2c failed, err -22
<7>[ 282.600396] c0 s5c73m3_init: isp.bad_fw is true
<3>[ 282.600417] c0 s5c73m3_init: i2c failed, err -22
<7>[ 282.600440] c0 s5c73m3_power_down: in
<4>[ 282.634053] c0 s3c_csis_power: vmipi_1.8v is on. so OFF
<4>[ 282.634288] c0 s3c_csis_power: vmipi_1.1v is on. so OFF
<4>[ 282.634331] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF
<3>[ 282.634380] c0 s3c-fimc0: Camera power/init failed!!!!
<3>[ 282.634415] c0
<3>[ 282.634442] c0 s3c-fimc0: fimc_runtime_suspend : invalid fimc control
<3>[ 282.634706] c0 s3c-fimc0: fimc_configure_subdev: fail to initialize subdev
<3>[ 282.634839] c0 s5c73m3_remove: camera is not ready!!
<3>[ 282.635470] c1 s3c-fimc0: fimc_s_input: Could not register camera sensor with V4L2.
<4>[ 282.635754] c1 s3c-fimc0: FIMC0 0 released.
How can I fix it?
Thanks in advance.
forumber2 said:
Hi XDA community
I have a weird problem on my S3
I can't use Camera with Custom Kernels on Sammy (Samsung) based ROMs (I tried Googy-Max and Boeffla kernel). When I try to access to Camera, applications says "Camera Failed" or "Failed to connect Camera". If I use stock kernel with sammy based ROMs, I can use camera.
And also, I haven't got any problem in CyanogenMod based ROM with custom kernel (Googy-Max).
How can I fix it?
Thanks in advance.
Click to expand...
Click to collapse
Does your phone have the latest camera firmware. Not sure if it would help but worth a shot. Search around for camera firmware update/upgrade in the forums. There is a thread that shows you how to check with links to updates.
forumber2 said:
Hi XDA community
I have a weird problem on my S3
I can't use Camera with Custom Kernels on Sammy (Samsung) based ROMs (I tried Googy-Max and Boeffla kernel). When I try to access to Camera, applications says "Camera Failed" or "Failed to connect Camera". If I use stock kernel with sammy based ROMs, I can use camera.
And also, I haven't got any problem in CyanogenMod based ROM with custom kernel (Googy-Max).
How can I fix it?
Thanks in advance.
Click to expand...
Click to collapse
Just try clearing data and cache for the camera app and reboot and see if it works after that
Sent from my GT-I9300 using Tapatalk 2
wangdaning said:
Does your phone have the latest camera firmware. Not sure if it would help but worth a shot. Search around for camera firmware update/upgrade in the forums. There is a thread that shows you how to check with links to updates.
Click to expand...
Click to collapse
Galaxy S3 doesn't support external camera update I think. ( I couldn't find )
galaxys3lover said:
Just try clearing data and cache for the camera app and reboot and see if it works after that
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Tried but no way. This problem is exits in every camera application, not only on sammy camera.
I added the dmesg log to #1 post.
I had the same problem. Try to flash stock with odin and then flash foxhound 2.5. Mine worked after that.
Sent from my GT-I9300 using xda app-developers app
sosferatu said:
I had the same problem. Try to flash stock with odin and then flash foxhound 2.5. Mine worked after that.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Which firmware did you flash with Odin?
I9300XXEME2
Sent from my GT-I9300 using xda app-developers app
And?
Sent from my GT-I9300 using xda app-developers app
forumber2 said:
Galaxy S3 doesn't support external camera update I think. ( I couldn't find )
Click to expand...
Click to collapse
It does. There is a thread about it in the general section. I think they call it camera driver and not firmware, but it is firmware. Type in *#34971539# in the dial pad and check your phone and camera firmware. They should match.
sosferatu said:
I had the same problem. Try to flash stock with odin and then flash foxhound 2.5. Mine worked after that.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'll try
wangdaning said:
It does. There is a thread about it in the general section. I think they call it camera driver and not firmware, but it is firmware. Type in *#34971539# in the dial pad and check your phone and camera firmware. They should match.
Click to expand...
Click to collapse
I understand that I need to reflash camera chip and I think it's very risky. I will try to reflash official firmware with ODIN.
I think I found a solution;
First,boot the ROM with original kernel and open the camera. After that,flash any kernel do you want and you have a working camera. But If I wipe /data partition, this problem appears again.
Hi!
I have a problem with my HTC Desire X. The device was ok until it went off and was plugged to a power source, then only the HBOOT menu appeared.
The device has not been touched concerning custom roms, boot loaders etc. until then. So it had the stock rom and as far as I know, there was no update going on, when the device turned off.
To solve the problem, I unlocked the bootloader and installed the recovery image TWRP 2.5.0. But in the Recovery mode I could not mount any internal partition. So it was not possible to wipe anything or install a custom rom.
The only explanation I found for this is, that maybe the internal memory (EMMC) was corrupted and the system could not mount it and boot up. My question is: Is there something I can do to about it?
It would be nice if I could boot up an Android system from SD card. Is this possible? I only found solutions for other HTC devices so far.
I did some more research.
First I tried to start fdisk/parted to print the partition table. Both did not work. parted hangs, while fdisk says it could not read the device.
So I looked what I can find with procfs. There are only four partitions printed.
Code:
cat /proc/partitions
major minor #blocks name
179 0 3784708 mmcblk0
179 1 20 mmcblk0p1
179 2 544 mmcblk0p2
179 3 4500 mmcblk0p3
179 4 1 mmcblk0p4
Code:
cat /proc/emmc
dev: size erasesize name
mmcblk0p17: 00040000 00000200 "misc"
mmcblk0p21: 00c7f600 00000200 "recovery"
mmcblk0p27: 00fffc00 00000200 "boot"
mmcblk0p24: 3bdffe00 00000200 "system"
mmcblk0p26: 0f000000 00000200 "cache"
mmcblk0p25: 4cfffe00 00000200 "userdata"
mmcblk0p28: 017ade00 00000200 "devlog"
mmcblk0p30: 00040000 00000200 "pdata"
mmcblk0p31: 46800000 00000200 "fat"
mmcblk0p29: 00011c00 00000200 "extra"
Then I tried to find out wether there were error messanges concerning the emmc:
Code:
dmesg |grep mmc
<6>[ 7.378778] C0 mmc0: SDCC Version: 0x00000000
<3>[ 7.378981] C0 mmc0: No card detect facilities available
<6>[ 7.380389] C0 mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0
dma 7 dmacrcri 12
<6>[ 7.380416] C0 mmc0: Controller capabilities: 0x00000001
<6>[ 7.380434] C0 mmc0: Platform slot type: MMC
<6>[ 7.380451] C0 mmc0: 8 bit data mode enabled
<6>[ 7.380468] C0 mmc0: 4 bit data mode disabled
<6>[ 7.380484] C0 mmc0: polling status mode disabled
<6>[ 7.380504] C0 mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 80000000 Hz
<6>[ 7.380524] C0 mmc0: Slot eject status = 0
<6>[ 7.380541] C0 mmc0: Power save feature enable = 1
<6>[ 7.380561] C0 mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x13740000
<6>[ 7.380584] C0 mmc0: DM cmd busaddr 0x13740000, cmdptr busaddr 0x13757f40
<6>[ 7.381294] C0 mmc1: SDCC Version: 0x00000000
<6>[ 7.383129] C0 mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,2
94 dma 10 dmacrcri 6
<6>[ 7.383156] C0 mmc1: Controller capabilities: 0x00000001
<6>[ 7.383174] C0 mmc1: Platform slot type: SD
<6>[ 7.383191] C0 mmc1: 8 bit data mode disabled
<6>[ 7.383208] C0 mmc1: 4 bit data mode enabled
<6>[ 7.383224] C0 mmc1: polling status mode disabled
<6>[ 7.383244] C0 mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 80000000 Hz
<6>[ 7.383264] C0 mmc1: Slot eject status = 1
<6>[ 7.383281] C0 mmc1: Power save feature enable = 1
<6>[ 7.383301] C0 mmc1: DM non-cached buffer at ffda0000, dma_addr 0x13760000
<6>[ 7.383324] C0 mmc1: DM cmd busaddr 0x13760000, cmdptr busaddr 0x13777f40
<6>[ 7.383951] C0 mmc2: SDCC Version: 0x00000000
<6>[ 7.385494] C0 mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0
dma 8 dmacrcri 7
<6>[ 7.385521] C0 mmc2: Controller capabilities: 0x00000001
<6>[ 7.385539] C0 mmc2: Platform slot type: SDIO(WIFI)
<6>[ 7.385556] C0 mmc2: 8 bit data mode disabled
<6>[ 7.385573] C0 mmc2: 4 bit data mode enabled
<6>[ 7.385589] C0 mmc2: polling status mode disabled
<6>[ 7.385609] C0 mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 80000000 Hz
<6>[ 7.385629] C0 mmc2: Slot eject status = 1
<6>[ 7.385646] C0 mmc2: Power save feature enable = 1
<6>[ 7.385666] C0 mmc2: DM non-cached buffer at ffd80000, dma_addr 0x13780000
<6>[ 7.385689] C0 mmc2: DM cmd busaddr 0x13780000, cmdptr busaddr 0x13797f40
<6>[ 7.447169] C0 mmc_attach_sdio mmc_send_io_op_cond error1: -110
<3>[ 7.470703] C0 mmc0: ACMD 41 init process fail : resp : 0x0
<6>[ 7.534723] C0 mmc0: cid 90014a2058494e594814005f562a8f6e
<6>[ 7.534738] C0 mmc0: csd d02701320f5903d7ffffffe78a4040e6
<6>[ 7.534758] C0 mmc0: ext_csd 00000000000000010301000000000000
<6>[ 7.534776] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534794] C0 mmc0: ext_csd 00004000000000080000000000000000
<6>[ 7.534813] C0 mmc0: ext_csd 00000000000000000000080000000000
<6>[ 7.534831] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534849] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534868] C0 mmc0: ext_csd 00000800000000000000000000000000
<6>[ 7.534886] C0 mmc0: ext_csd 00000000000001040000000000000000
<6>[ 7.534904] C0 mmc0: ext_csd 00000000000000000000200000000000
<6>[ 7.534923] C0 mmc0: ext_csd 00000000000000000000080000000000
<6>[ 7.534941] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534959] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534978] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.534996] C0 mmc0: ext_csd 00000040000000000000020000000000
<6>[ 7.535014] C0 mmc0: ext_csd 00001000000000000000000000000000
<6>[ 7.535033] C0 mmc0: ext_csd 00000000000000000000080000000000
<6>[ 7.535051] C0 mmc0: ext_csd 00000000000000000000000000000a00
<6>[ 7.535069] C0 mmc0: ext_csd 0000000000000001150a0a0700100701
<6>[ 7.535088] C0 mmc0: ext_csd 02010807070013000073800800080808
<6>[ 7.535108] C0 mmc0: ext_csd 08080800000000000202020700020005
<6>[ 7.535126] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.535144] C0 mmc0: ext_csd 00000000000000101f05000000010003
<6>[ 7.535163] C0 mmc0: ext_csd 00011e00000000000000000000000000
<6>[ 7.535181] C0 mmc0: ext_csd 00000000000000000000000000000004
<6>[ 7.535199] C0 mmc0: ext_csd 00000008000000000000000000000200
<6>[ 7.535218] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.535234] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.535253] C0 mmc0: ext_csd 00000010000000000000000000000000
<6>[ 7.535271] C0 mmc0: ext_csd 00000000000000000000000000000002
<6>[ 7.535289] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.535308] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.535326] C0 mmc0: ext_csd 00000000000000000000000000000000
<6>[ 7.539618] C0 mmc0: set ext_csd.erase_group_def
<6>[ 7.550189] C0 mmc0: new high speed MMC card at address 0001
<6>[ 7.550671] C0 mmcblk0: mmc0:0001 XINYH 3.60 GiB
<6>[ 7.607051] C0 mmc2: Slot status change detected (0 -> 1)
<3>[ 7.857109] C0 mmc0: CMD18: Data timeout
<3>[ 7.857121] C0 mmc0: SDCC PWR is ON
<3>[ 7.857169] C0 mmc0: SDCC clks are ON, MCLK rate=50000000
<3>[ 7.857181] C0 mmc0: SDCC irq is enabled
<3>[ 7.857399] C0 mmc0: MCI_TEST_INPUT = 0x000003fe
<3>[ 7.857411] C0 mmc0: ADM mode: busy=1, chnl=7, crci=12
<3>[ 7.857423] C0 mmc0: xfer_size=4096, data_xfered=0, xfer_remain=4096
<3>[ 7.857438] C0 mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done
=0, got_auto_prog_done=0, req_tout_ms=10000
<3>[ 7.857454] C0 mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspendi
ng=0
<3>[ 7.857471] C0 mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0,
disable_depth=0, runtime_error=0, request_pending=0, request=0
<3>[ 7.857538] C1 mmc0: DMA channel flushed (0x80000004)
<6>[ 7.857621] C1 mmc0: Controller has been reinitialized
<3>[ 7.857711] C0 mmcblk0: error -110 sending stop command, original cmd resp
onse 0x40000900, card status 0x400900
<3>[ 7.857728] C0 mmcblk0: r/w command failed, status = 0x40000900
<3>[ 7.857751] C0 end_request: I/O error, dev mmcblk0, sector 10128
<3>[ 7.857768] C0 Buffer I/O error on device mmcblk0, logical block 1266
<3>[ 8.163094] C0 mmc0: CMD18: Data timeout
<3>[ 8.163106] C0 mmc0: SDCC PWR is ON
<3>[ 8.163153] C0 mmc0: SDCC clks are ON, MCLK rate=50000000
<3>[ 8.163163] C0 mmc0: SDCC irq is enabled
<3>[ 8.163381] C0 mmc0: MCI_TEST_INPUT = 0x000003fe
<3>[ 8.163393] C0 mmc0: ADM mode: busy=1, chnl=7, crci=12
<3>[ 8.163404] C0 mmc0: xfer_size=4096, data_xfered=0, xfer_remain=4096
<3>[ 8.163419] C0 mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done
=0, got_auto_prog_done=0, req_tout_ms=10000
<3>[ 8.163436] C0 mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspendi
ng=0
<3>[ 8.163453] C0 mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0,
disable_depth=0, runtime_error=0, request_pending=0, request=0
<3>[ 8.163514] C1 mmc0: DMA channel flushed (0x80000004)
<6>[ 8.163596] C1 mmc0: Controller has been reinitialized
<3>[ 8.163676] C0 mmcblk0: error -110 sending stop command, original cmd resp
onse 0x40000900, card status 0x400900
<3>[ 8.163693] C0 mmcblk0: r/w command failed, status = 0x40000900
<3>[ 8.163713] C0 end_request: I/O error, dev mmcblk0, sector 10128
<3>[ 8.163729] C0 Buffer I/O error on device mmcblk0, logical block 1266
<6>[ 8.163773] C0 mmcblk0: p1 p2 p3 p4 < >
<6>[ 8.164671] C0 mmc_rescan_try_freq: Find a MMC/eMMC card
<6>[ 8.233194] C0 mmc2: new high speed SDIO card at address 0001
<6>[ 8.251248] C0 mmc_rescan_try_freq: Find a SDIO card
<3>[ 8.790308] C0 mmc0: CMD18: Data timeout
<3>[ 8.790318] C0 mmc0: SDCC PWR is ON
<3>[ 8.790366] C0 mmc0: SDCC clks are ON, MCLK rate=50000000
<3>[ 8.790376] C0 mmc0: SDCC irq is enabled
<3>[ 8.790594] C0 mmc0: MCI_TEST_INPUT = 0x000003fe
<3>[ 8.790606] C0 mmc0: ADM mode: busy=1, chnl=7, crci=12
<3>[ 8.790618] C0 mmc0: xfer_size=4096, data_xfered=0, xfer_remain=4096
<3>[ 8.790633] C0 mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done
=0, got_auto_prog_done=0, req_tout_ms=10000
<3>[ 8.790649] C0 mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspendi
ng=0
<3>[ 8.790666] C0 mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0,
disable_depth=0, runtime_error=0, request_pending=0, request=0
<3>[ 8.790741] C1 mmc0: DMA channel flushed (0x80000004)
<6>[ 8.790841] C1 mmc0: Controller has been reinitialized
<3>[ 8.790936] C0 mmcblk0: error -110 sending stop command, original cmd resp
onse 0x40000900, card status 0x400900
<3>[ 8.790953] C0 mmcblk0: r/w command failed, status = 0x40000900
<3>[ 8.790979] C0 end_request: I/O error, dev mmcblk0, sector 10128
<3>[ 8.790998] C0 Buffer I/O error on device mmcblk0, logical block 1266
<3>[ 9.096353] C0 mmc0: CMD18: Data timeout
<3>[ 9.096363] C0 mmc0: SDCC PWR is ON
<3>[ 9.096408] C0 mmc0: SDCC clks are ON, MCLK rate=50000000
<3>[ 9.096416] C0 mmc0: SDCC irq is enabled
<3>[ 9.096591] C0 mmc0: MCI_TEST_INPUT = 0x000003fe
<3>[ 9.096599] C0 mmc0: ADM mode: busy=1, chnl=7, crci=12
<3>[ 9.096609] C0 mmc0: xfer_size=4096, data_xfered=0, xfer_remain=4096
<3>[ 9.096621] C0 mmc0: got_dataend=0, prog_enable=0, wait_for_auto_prog_done
=0, got_auto_prog_done=0, req_tout_ms=10000
<3>[ 9.096634] C0 mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspendi
ng=0
<3>[ 9.096648] C0 mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0,
disable_depth=0, runtime_error=0, request_pending=0, request=0
<3>[ 9.096721] C1 mmc0: DMA channel flushed (0x80000004)
<6>[ 9.096803] C1 mmc0: Controller has been reinitialized
<3>[ 9.096889] C0 mmcblk0: error -110 sending stop command, original cmd resp
onse 0x40000900, card status 0x400900
<3>[ 9.096903] C0 mmcblk0: r/w command failed, status = 0x40000900
<3>[ 9.096924] C0 end_request: I/O error, dev mmcblk0, sector 10128
<3>[ 9.096941] C0 Buffer I/O error on device mmcblk0, logical block 1266
I see some I/O errors there.
Hi All,
I've loved my Samsung Galaxy S3 I9300 and have been so happy with the Resurrection Remix Marshmallow ROM (ResurrectionRemix-M-v5.6.4-20160223-i9300.zip). Over the last few weeks, I'd notice the phone would have random problems but a re-install via full wipe would bring it back into working order. However, when I woke up this morning all I could get was the Samsung SIII boot logo, the recovery: TWRP v2.8.6.1 or the fastboot/download mode.
When the TWRP recovery is booted I discovered I can get a root shell via "adb shell" and that /data was empty and, in fact, all my filesystems are read only. I'm an old linux hand so I suspect my 16GB of internal Nand memory is getting a bit too long in the tooth... so I thought I'd "umount /data" try running "e2fsck -vf /dev/block/mmcblk0p12" on the /data device... and "/proc/kmsg" spurts out a steady stream of I/O errors:
<7>[ 1440.020301] c0 mshci: ===========================================
<3>[ 1440.020402] c0 brq->sbc.opcode=23,brq->cmd.opcode=25.
<3>[ 1440.020449] c0 brq->sbc.error=-110,brq->cmd.error=0, brq->stop.error=0,brq->data.error=0.
<3>[ 1440.020558] c0 mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400d00
<3>[ 1440.020628] c0 mmcblk0: command error, retrying timeout
<3>[ 1440.144001] c0 mmc0: cmd 23 response timeout error
<7>[ 1440.144050] c0 mshci: ============== REGISTER DUMP ==============
<7>[ 1440.144105] c0 mshci: MSHCI_CTRL: 0x00000010
<7>[ 1440.144147] c0 mshci: MSHCI_PWREN: 0x00000001
<7>[ 1440.144190] c0 mshci: MSHCI_CLKDIV: 0x00000001
<7>[ 1440.144232] c0 mshci: MSHCI_CLKSRC: 0x00000000
<7>[ 1440.144275] c0 mshci: MSHCI_CLKENA: 0x00000001
<7>[ 1440.144317] c0 mshci: MSHCI_TMOUT: 0xffffffff
<7>[ 1440.144360] c0 mshci: MSHCI_CTYPE: 0x00010000
<7>[ 1440.144402] c0 mshci: MSHCI_BLKSIZ: 0x00000200
<7>[ 1440.144445] c0 mshci: MSHCI_BYTCNT: 0x00001000
<7>[ 1440.144488] c0 mshci: MSHCI_INTMSK: 0x0000bfce
<7>[ 1440.144530] c0 mshci: MSHCI_CMDARG: 0x00000020
<7>[ 1440.144573] c0 mshci: MSHCI_CMD: 0x20002157
<7>[ 1440.144615] c0 mshci: MSHCI_MINTSTS: 0x00000000
<7>[ 1440.144658] c0 mshci: MSHCI_RINTSTS: 0x00000030
<7>[ 1440.144700] c0 mshci: MSHCI_STATUS: 0x00006906
<7>[ 1440.144743] c0 mshci: MSHCI_FIFOTH: 0x503f0040
<7>[ 1440.144786] c0 mshci: MSHCI_CDETECT: 0x00000001
<7>[ 1440.144828] c0 mshci: MSHCI_WRTPRT: 0x00000001
<7>[ 1440.144871] c0 mshci: MSHCI_GPIO: 0x00000000
<7>[ 1440.144913] c0 mshci: MSHCI_TCBCNT: 0x00000800
<7>[ 1440.144956] c0 mshci: MSHCI_TBBCNT: 0x00001000
<7>[ 1440.144999] c0 mshci: MSHCI_DEBNCE: 0x000fffff
<7>[ 1440.145041] c0 mshci: MSHCI_USRID: 0xffffffff
<7>[ 1440.145084] c0 mshci: MSHCI_VERID: 0x5342240a
<7>[ 1440.145127] c0 mshci: MSHCI_HCON: 0x00e424c1
<7>[ 1440.145169] c0 mshci: MSHCI_UHS_REG: 0x00010000
<7>[ 1440.145212] c0 mshci: MSHCI_BMOD: 0x00000582
<7>[ 1440.145254] c0 mshci: MSHCI_PLDMND: 0x00000000
<7>[ 1440.145297] c0 mshci: MSHCI_DBADDR: 0x6bc44000
<7>[ 1440.145340] c0 mshci: MSHCI_IDSTS: 0x00000000
<7>[ 1440.145382] c0 mshci: MSHCI_IDINTEN: 0x00000000
<7>[ 1440.145425] c0 mshci: MSHCI_DSCADDR: 0x6bc44000
<7>[ 1440.145467] c0 mshci: MSHCI_BUFADDR: 0x00000000
<7>[ 1440.145510] c0 mshci: MSHCI_WAKEUPCON: 0x00000000
<7>[ 1440.145553] c0 mshci: MSHCI_CLOCKCON: 0x00000000
<7>[ 1440.145595] c0 mshci: MSHCI_FIFODAT: 0x00000000
<7>[ 1440.145638] c0 mshci: ===========================================
<3>[ 1440.145808] c0 mmc0: it occurs a critical error on eMMC it'll try to recover eMMC to normal state
So, since my TWRP seems intact but my internal Nand memory appears hosed is there any way I can convince TWRP or any other bootloader/recovery to use my external SDCARD as a boot device instead ?
I note that there's a /init.rc which appears to define where ANDROID_ROOT and ANDROID_DATA come from:
on init
export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
export LD_LIBRARY_PATH .:/sbin
export ANDROID_ROOT /system
export ANDROID_DATA /data
export EXTERNAL_STORAGE /sdcard
mkdir /sdcard
mkdir /extSdCard
mkdir /system
mkdir /data
mkdir /cache
mkdir /preload
mkdir /efs
mount /tmp /tmp tmpfs
I'm not clear on where the content of / comes from... I seem to have lost everything in /system (except for an empty /system/bin)... / does seem to be writable but it does not persist reboots. Old favourites for partition information seem inconsistent: fdisk, df, mount and /proc/partitions.
Fdisk only sees one partition, presumably because it's got a gpt label that fdisk cannot understand:
~ # fdisk -l /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 15.7 GB, 15758000128 bytes
1 heads, 16 sectors/track, 1923584 cylinders
Units = cylinders of 16 * 512 = 8192 bytes
Device Boot Start End Blocks Id System
/dev/block/mmcblk0p1 1 1923584 15388671+ ee EFI GPT
Partition 1 does not end on cylinder boundary
Df only sees cache, external_sd and /efs:
# df -kh
Filesystem Size Used Available Use% Mounted on
tmpfs 416.5M 48.0K 416.4M 0% /dev
/dev/block/mmcblk0p8 1007.9M 17.3M 990.6M 2% /cache
/dev/block/mmcblk1p1 59.6G 39.2G 20.4G 66% /external_sd
/dev/block/mmcblk0p3 19.7M 9.2M 10.5M 47% /efs
Mount confirms "df":
# mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
/dev/block/mmcblk0p8 on /cache type ext4 (ro,seclabel,relatime,user_xattr,barrier=1,data=ordered)
/dev/block/mmcblk1p1 on /external_sd type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/block/mmcblk0p3 on /efs type ext4 (rw,seclabel,relatime,user_xattr,barrier=1,data=ordered)
However, /proc/partitions contradicts these:
# cat /proc/partitions
major minor #blocks name
179 0 15388672 mmcblk0
179 1 4096 mmcblk0p1
179 2 4096 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 8192 mmcblk0p5
179 6 8192 mmcblk0p6
179 7 32768 mmcblk0p7
179 8 1048576 mmcblk0p8
179 9 1572864 mmcblk0p9
179 10 573440 mmcblk0p10
179 11 8192 mmcblk0p11
179 12 12091392 mmcblk0p12
179 16 62521344 mmcblk1
179 17 62520320 mmcblk1p1
Suggesting that the kernel sees all the devices and partitions.
Any advice hugely appreciated... I realise I may out of luck and just have to resign myself to the fact that, while I have a working device and SD card, the fact that the internal Nand memory is hosed means it's time to let go. Or maybe there's another way to breath life into the Nand ?
Any thoughts, the more technical the better, hugely appreciated.
Cheers,
Doug
I think twrp is the problem.
The safest thing to do is flash a stock rom via odin and start over.
The risky choice is to find another known working recovery and see if that can mount the partitions.
At one time twrp borked and i thought id lost my trusty old s3 so i found and flashed the stock recovery and all worked fine. I don't recommend it by a long shot. It was a "its f**ked anyway" moment.
Sent from my HTC One M9 using Tapatalk
Hi Shivado,
Thanks so much for responding.
I spent all day trying to download a stock i9300 4.3 ROM... every one I could find failed to download... from a wide range of dodgy looking file sharing sites. I'll keep trying... maybe, if I can't find one, I'll try re-flashing the recovery.
Cheers,
Doug
dscoular said:
Hi Shivado,
Thanks so much for responding.
I spent all day trying to download a stock i9300 4.3 ROM... every one I could find failed to download... from a wide range of dodgy looking file sharing sites. I'll keep trying... maybe, if I can't find one, I'll try re-flashing the recovery.
Cheers,
Doug
Click to expand...
Click to collapse
This stuff is for international (btu) only
https://drive.google.com/folderview?id=0B4vTiHTBB629ZW5vQndpbjFnblk
Sent from my HTC One M9 using Tapatalk
Hi Shivado,
I tried flashing with ODIN and Heimdall... Odin just timed out trying to set up a connection... Heimdall started flashing the cache.img file but then failed after 68%:
bash-3.2$ sudo heimdall flash --CACHE cache.img \
--BOOT boot.img \
--SYSTEM system.img \
--RECOVERY recovery.img \
--RADIO modem.bin \
--HIDDEN hidden.img \
--BOOTLOADER sboot.bin \
--TZSW tz.img --verbose
> > > > > > > Heimdall v1.4.1
Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Manufacturer: "SAMSUNG"
Product: "Gadget Serial"
length: 18
device class: 2
S/N: 0
VIDID: 04E8:685D
bcdDevice: 021B
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 83
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 02
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
WARNING: Empty bulk transfer after receiving packet failed. Continuing anyway...
PIT file download successful.
Uploading CACHE
68%
ERROR: Failed to unpack received packet.
I wonder if I can somehow boot off the external SD card instead ?
Any thoughts or suggestions hugely appreciated.
Cheers,
Doug