Has anyone heard of the Hi-PEEL HI8 Mobile Smartwatch?
https://www.chinavasion.com/china/w...ll_Phone_Watch/Hi-PEEL-HI8-Mobile-Smartwatch/
anyone?
I heard of it here: http://forum.xda-developers.com/showpost.php?p=61575412&postcount=1
You have to know that Chinavasion products name got custom names. You won't find another product with the same name in another place.
In that case, we got an old watch since the OS version is only Android 4.2. I'm not exepting anything special with it.
Related
Is this even possible? I think that device has a potential. It's the crappy software that is preventing me from purchasing it. It would be nice if someone developed true android ports for those cheap Chinese mobile phones so poor college students like myself who do not wish to be locked to a contract can get a cheap phones. I finally found that the Airphone has a processor with the following specs:
Mtek MT6235 ARM9 core, 208MHz Speed CPU
I read somewhere that Android needs at least 200mhz to run, so this processor should be able to support it, right? I am interested in getting into the mobile hacking scene for Android, but I do not know where to begin. If I purchased this mobile phone (its cheap, I can get it for 89$) which tools would I require to begin hacking it?
Yes, I know this mobile phone does not have 3G, but I have no use for that technology on a phone because I have other means of accessing the internet. I like this mobile because it is very very slim, about the same size as my ipod touch. I know so many other people would purchase this phone if it had android instead of the sucky iPhoney OS.
Many thanks!
So many views yet no replies. Do you think I would have better luck asking this in the Official Google Android developer forum? Or is this type of chinese technology as unknown and elusive as I figured it would be?
if the mtek run winmobile
you can try to start android whit haret
i think that the cpu is the same of htc opal(omap 850)
look here
http://sourceforge.net/apps/trac/wing-linux/wiki
It doesnt run windows mobile unfortunately. It runs a weird OS called "MTK OS", which apparently is a modified version of Nucleus OS.
Hey thanks for your responses! I will take this to the Official Google Android Forum.
Looking to for something like Airphones
I want to play the video on my pc monitor
and steam the audio of this video on my android phone to listen with headphones
linux port
Hello,
some russian guys made a linux port to MT6235 (Google: Linux'у на MT6235 быть (инструкция прилагается))
Starting an Android kernel would be trivial, but RAM is not enough, so Android on MT6235 is useless.
I have a cheap no-name Allwinner A10 tablet. I want to try out firmware made by others, including CyanogenMod. My tablet is very similar to others sold under different brands so I even can easily try out official firmware made by other companies. In fact I'm using firmware I downloaded from the website of a manufacturer other than the one who built (or should I say "built") my tablet. In other words, I have a generic Chinese tablet, sold under dozens of names and brands.
So far the only problem I had with other firmware (if I got it to work, of course) was the touch screen. Everything worked as it should but I had no touch input.
My question is can I check the exact driver of the touch screen/digitizer that is used by my current firmware? That way I would know what cyanogenmod builds or compatibility packs to look for.
Hello.
I want to install Android Wear on a Chinese SmartWatch.
Is it in any way possible?
No, Android Wear is closed source.
Seems a big ask, and what would you expect out of a cheap chinese watch anyway? It wouldn't have enough beef to run it, regardless, right?
Model?
deskdzn said:
Hello.
I want to install Android Wear on a Chinese SmartWatch.
Is it in any way possible?
Click to expand...
Click to collapse
What is the model first?
I purchased a generic 10" tablet on ebay said to have android v8. I bought it for my kid
When it arrived 1st thing I did is try to install google family link for kids (req Android 5+)
It failed, Kodi install failed.
When I went into Soft version it's said android 8.1 when I clicked the version 10 times the K popped up.
It must be android v4 spoofed to show 8.1.
This generic tablet is useless to me, it has a MediaTek Chip MTK6797 or so it says (don't know what to believe now)
Any way I can get a new update on this to at least give me android 5.
Is the MTK6797 capable of anything above android 4? What determine what android can be installed? I'm thinking this cpu can handle something about 4.44 but I'm not sure what rom I would need that would work this this.
This is a very generic tablet I purchased a similar looking on fro Telscast and it was fine that is why i bought another, it looked identical but not a telcast and from a different supplier .
Thank You,
if you payed with paypal, you can ask the total refund. which is a much better option than keep that tablet.
Got a full REfund
Got a full refund this morning,
I got to keep this knock off, wondering if there is any FW's that would make this work correctly and higher then 4.4
@Nambi_
The hardware for which an Android version can be installed is defined by Android Compatibility Definition Document. A board will only be able to run an Android version perfectly if it supports the basic requirements listed in Android CDD.
Of course, you can port a higher version to a board that does not meet the criteria but it would be totally mind draining work.
HIT THANKS IF FOUND USEFUL
I have bought a dongle and discovered it does not have the usual RK SoC , instead it has an Allwinner A10. The pcb is red, it has the SoC, flash, sram, some voltage regulators and a push button and a led. Does anyone have any idea where to get firmware roms for this dongle? The stock firmware is very bad. Dlna barely works. Miracast disconnects immediately after connection.
@an31415 people would need the name and model number to stand a chance of helping you.
I think the best you could hope for is firmware from another identical device sold under a different brand name.
if you were able to try this you'd still need to have the original firmware on hand in case it didn't work.
3mel said:
@an31415 people would need the name and model number to stand a chance of helping you.
I think the best you could hope for is firmware from another identical device sold under a different brand name.
if you were able to try this you'd still need to have the original firmware on hand in case it didn't work.
Click to expand...
Click to collapse
Thanks @3mel for your reply. The product box says "HDMI Dongle Wifi Display Receiver" and on the dongle it is written "Anycast". This is one of the many clones you can by on Aliepxress. I was hoping it's one with an RK cpu, but after cracking it open I found out it has an Allwinner A10 cpu. I searched high and low on internet to find and alternative firmware for it because the current one is crap. I'll try to attach some pictures here of the PCB, maybe somebody can identify it and point me in the right direction.
But how do I attach picture? Can junior members do it ?
More info: the dongle PCB is red and has a label, SP-X11-V2.0, and the name of the Wifi access point it creates is SP-xxxxxx, where the Xs are random hex digits.
The Wifi addon pcb is green and has no markings. The wifi chip is a well known Realtek that is found in all other similar products.
if you inbox me the AliExpress link I will post it here for you, that's probably the best way for anyone to identify it.
https://m.aliexpress.com/item/4001025810891.html
I received the variant in the colorful box(not the blue ones) and it does not say M2 nor M4 on the box. The product description says it has an AM8252 cpu, but it's not true. I guess the only way to id it is to post pictures of the pcb.
https://youtu.be/uXgBrT6J_Ew
the chips aren't the same as yours but does the board look similar ?
being honest I wouldn't get your hopes up, it's a cheap clone / copy of a chromecast. it's not going to be supported that well, they've already sold you something that doesn't match their product description. take it for what it is and learn that you get what you pay for... sorry.
The board is not similar, it has different ICs, different layout, different color. But the plastic enclosure is identical, except for the venting holes on the back, which are bigger on mine. This case copies the Chromecast (first generation), so people expect it to be a Chromecast clone. It isn't, but it does serve a similar purpose
The date on the PCB is 2019.10.10, fairly recent. I expect a new wave of clones have hit the market, disguised as already established products, but based on a different SoC. The only problem is their firmware is even less stable than the old ones, so I guess other people, not just me, are looking for solutions.
some of those people looking need to be devs.
Yup. Or anybody with a similar but not identical A10 based board. Maybe we can spot different fw versions in the wild
A small update if anybody is interested. I've connected the board via usb to my laptop (running linux mint). Doing this while keeping the button pressed will put the board's bootloader in some sort of firmware update mode. Running lsusb will show it as an usb device : "Bus 001 Device 066: ID 1f3a:efe8 Onda (unverified) V972 tablet in flashing mode". Of course this is not an Onda tablet, but it certainly has an identical SoC, thus the misidentification of the usb device.
Googling for this string I randomly found out there are some people called the sunxi community that strive to create a linux kernel and toolchain for these Allwinner devices, and they have done it quite successfully.
There are many custom firmwares for tablets, tv boxes and mini PCs that are based on the allwinner SoC. It seems this miracast hdmi device is just a trimmed down mini PC. It certainly runs pure linux, no Android, because its ram and flash are much smaller than what I found in the specs of any android devices.
So the question is: does any body have any knowledge of the existence of such a linux based firmware for this miracast board ? I'll go ask the sunxi people also.