{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer :
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is ONLY for Touchwiz based ROMs. This will NOT work on the CM/AOSP.
I will update this as long as I have time, introducing new features and fixes for any issues that may arise.
If you have any feature requests, don't hesitate to throw it out there, I love new things! :good:
Features:
---------------------------------------
-CC: Google 4.8
-Ver: 3.4.0
-Kernel Compression: LZO
-Ramdisk Compression: GZIP
-CPU Min Freq: 192Mhz NEW
-CPU Max Freq: 1.6GHz NEW
-GPU Max Freq: 533Mhz NEW
-LCD KCAL - RGB Control
-Sweep2Wake
-Sweep2Sleep
-Sweep2Dim
-DoubleTap2Wake
-Headphone High Performance Mode
-FRandom
-Powersuspend
-VFP Hardfloat
-CPU-Boost via sysfs
-Disabled Samsung's DVFS
-Sound Control 3.2
-Under voltage CPU NEW
-IO:
Deadline
ROW
CFQ
BFQ
SIO
FIOPS
ZEN
VR
-GOV:
intellidemand
intelliactive
interactive
ondemandplus
userspace NEW
powersave NEW
conservatice NEW
ondemand
wheatly
performance
-HotPlug:
MPDecision
IntelliPlug (Default)
-Removed Some Samsung Useless Stuff
------------------------
sysfs:
/sys/android_touch/sweep2dim (0 = off, 1 = s2d)
/sys/android_touch/sweep2wake (0 = off, 1 = s2w+s2s/s2d, 2 = s2s)
/sys/module/sweep2wake/parameters/up_kcal <- Right sweep increases kcal with this value
/sys/module/sweep2wake/parameters/down_kcal <- Left sweep decreases kcal with this value
Click to expand...
Click to collapse
Download the Kernel From the 3rd POST
XDA:DevDB Information
Turbo Kernel, ROM for the Samsung Galaxy Grand 2
Contributors
aapav01
Source Code: https://github.com/aapav01/samsung_ms013g_SWA
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Version Information
Status: Stable
Created 2015-06-28
Last Updated 2015-07-01
Reserved
Change Log:
V1.1
CPU
GOV: userspace/powersave/conservatice
UC: 192 Mhz
OC: 1.6 GHz
Undervoltage
GPU:
Added Simple GPU Algorithm
OC: 533Mhz
TCP: BIC /CUBIC /HTCP /HYBLA /VEGAS/ VENO/WESTWOOD /RENO
INTELLI THERMAL V2
Click to expand...
Click to collapse
V1.0
---------Initial released
Kernel
Thanks! Just flashed it. Will try to give feedback after few days usage.
Sent from my SM-G7102 using XDA Free mobile app
Whoa! This is the first time I am thinking of going back to tw The only thing that sickens me is that grand 2, a device older than a year still doesn't have a fully operational custom Rom (looking at you scamsung)
@aapav01 Are the features like double tap etc working correctly and how's the battery usage? And thanks bro for all your support to the device
I use,S6 Styled S5port GenNxt Rom[UPDATED V3] if I can install this kernel ?? Thanks !
Double tap to wake and sweep to wake not working
Brdas said:
I use,S6 Styled S5port GenNxt Rom[UPDATED V3] if I can install this kernel ?? Thanks !
Click to expand...
Click to collapse
oops i forget to give that boo.img wait for few mims coming to you
gracefang said:
Double tap to wake and sweep to wake not working
Click to expand...
Click to collapse
Actually, you need a kernel managing app from playstor and then you can enable it ...
[ON WHICH I TESTED] : To fully Control this Kernel to need a Trickster MOD Donated ( this app u need to buy from the playstore LINK and i m not prompting the app so u can also use other apps.. )
pro version will able to use LED control and Volume Control n other features
work on g7105??
Brdas said:
I use,S6 Styled S5port GenNxt Rom[UPDATED V3] if I can install this kernel ?? Thanks !
Click to expand...
Click to collapse
S5 port ROM based Kernel : Download
> Disable SE Android
can you Flash n check the following:-
1. Private Mode
2. WhatsApp Video Downloading
Thank you bro..
Sent from my SM-G7102 using Tapatalk
---------- Post added at 04:46 PM ---------- Previous post was at 04:45 PM ----------
Have you disabled SE for stock kernel
Sent from my SM-G7102 using Tapatalk
aapav01 said:
S5 port ROM based Kernel : Download
> Disable SE Android
can you Flash n check the following:-
1. Private Mode
2. WhatsApp Video Downloading
Click to expand...
Click to collapse
Thank you bro.. :good:
manan001 said:
Thank you bro..
Sent from my SM-G7102 using Tapatalk
---------- Post added at 04:46 PM ---------- Previous post was at 04:45 PM ----------
Have you disabled SE for stock kernel
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
YUP .. it would be enabled u could see the extra line at the bottom of build.no.
Nothing happened
I flashed kernel then downloaded trickster mod and busybox ...then enabled sweep to wake, sweep to sleep, double tap to wake...but none of the feature is working...plz help
Feature request : Fast chargeing , voltage control , current controll , and some more
@aapav bro can plz add this feature than really it will be great. . . and i have read the thread but some features are not working bro so if you are able to fix than it will be really great. . . and more frequency to be added in this kernel to save battery. . . .
Sorry for bad english
Review
Amazing kernel after so long time and the features are cool.
I am on note 4 revolution v2 by gracefang and nk1 baseband. It's just amazing.
but only one thing is the frequency like 96mhz and which are less than 300mhz , they won't stick.they changes their state automatically.....hope @aapav Bro will fix it soon...
parth5490 said:
Amazing kernel after so long time and the features are cool.
I am on note 4 revolution v2 by gracefang and nk1 baseband. It's just amazing.
but only one thing is the frequency like 96mhz and which are less than 300mhz , they won't stick.they changes their state automatically.....hope @aapav Bro will fix it soon...
Click to expand...
Click to collapse
Fixed in the nxt release Turbo 1.1
Min freq
And added new features like
OC CPU TO 1.6 GHz
OC GPU to 530Mhz
Added more 3 gov for cpu
Added various TCP (network related)
awesome work bro..
I am waiting for the update eagerly... and thank you very very much for developing super quality kernel ...keep going bro...
Wow new kernel.. ^-^
Thank you so much for your hard work mr ^-^
thank you..
Related
RADIOACTIVE KERNEL
for CM13 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with gcc7 Sabermod Toolchain
New Synaptic drivers from CM12.1 - per-panel firmware loading
Linux 3.4.111
Latest CM12.1 Bacon patches
Latest Common Branch patches
Latest Linux 3.4.x patches
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Intellihotplug hotplug driver
Alucard hotplug driver
Zen decision hotplug driver
Zzmoove native hotplug canbe activated setting disable hotplug to 0 in his tunables
CPU Freqs Table: 268Mhz 2880Mhz
GPU Freqs Table: 200Mhz 587Mhz
CPU Freqs Limiter Drivers
Intellithermal full Control
XZ Kernel Compression
LZ4 Support
ZRAM Support
Option to enable/disable Fsync
Deadline, Row, Cfq, Bfqv7r5, Noop, Fiops, Sio, SioPlus, VR, Zen, Tripndroid
Disabled IO Stats
Smartmax, Interactive, Conservative, Impulse, ZZmoove, Performance,Smartmax_eps,Elementalx,Yankactive,Optimax,Bioshock,Alucard,Dancedance,Darkness,Intellimm,Hyper,Barry Allen,Bluactive,Adaptive,Wave,Wheatley,Lionheart,Pegasusq
Kcal Control: Colors, Saturation, Huge, Contrast and more
Kcal Profiles Supports
Voltage Control
Sound Control
Charge Control
Kexec Hardboot - Multirom
Ntfs Support
Gentle Fair Sleepers (Disabled by default)
CIFS Enabled
NFS v3 & v4.1 Enabled
Optimized RWSEM Algorithm
Auto FS Laptop Mode
Arch Power
Power efficient workqueues
Ksm
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
HERE
DOWNLOADS
HERE
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
*nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
Radioactive Reborn Kernel, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/android_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: Reborn_V2.51
Beta Release Date: 2015-12-31
Created 2015-05-27
Last Updated 2016-09-26
Great job
Congrats mate
Nice work mate. Why don't you post it in Development section ?
Love the feature set! Switched to CM12.1 for a quick minute to check it out and had no reboots at all. Sadly, no kernels are available for ColorOS.
lokesh.3440 said:
Nice work mate. Why don't you post it in Development section ?
Click to expand...
Click to collapse
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Nice!!!
Sent from my 1+1 using Tapatalk
Fantastic kernel, great job!
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Click to expand...
Click to collapse
Moved. :good:
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
acuicultor said:
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Click to expand...
Click to collapse
Just curious..you said its render built with uber..but isn't the render kernel already built with uber tc?
Or this is first build and you're gonna add features over time?
Sent from my A0001 using XDA Free mobile app
demon507 said:
Just curious..you said its render built with uber..but isn't the render kernel already built with uber tc?
Or this is first build and you're gonna add features over time?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Afaik Render builds his kernel with a custom linaro toolchain and yes this is first build and i'm gonna add features.
Sent from my Nuclear bacon
New version up, synced with latest render kernel, added zzmoove governor and compiled with UberTC 5.1
https://www.androidfilehost.com/?fid=24052804347760138
Sent from my Crispy Bacon
Congratulations.
A lot of work on your part.
Who follows her gets it
acuicultor said:
New version up, synced with latest render kernel, added zzmoove governor and compiled with UberTC 5.1
https://www.androidfilehost.com/?fid=24052804347760138
Sent from my Crispy Bacon
Click to expand...
Click to collapse
About to try this on nuclear slim ?
OmegaBlaze said:
About to try this on nuclear slim ?
Click to expand...
Click to collapse
Good combo for sure
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Crispy Bacon
Where can I get version 1.2?
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
acuicultor said:
Good combo for sure
View attachment 3364156
Sent from my Crispy Bacon
Click to expand...
Click to collapse
.....
OmegaBlaze said:
Where can I get version 1.2?
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
.....
Click to expand...
Click to collapse
We are testing it but soon will be available for download on his thread,this week for sure.
Sent from my Crispy Bacon
Really smooth with exodus rom and also great battery life
hassan_1000 said:
Really smooth with exodus rom and also great battery life
Click to expand...
Click to collapse
What config are you using ?
Lightning Kernel
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks @Jole7
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% @ak kernel source modified for new features
$$$$$FEATURES$$$$$
-WORKS ON BOTH AOSP AND CM BASED ROMS
$COOKED WITH$
-UBER 5.3 TOOLCHAIN
-03 Opitimizations
-GRAPHITE
-F2FS SUPPORT
MSM_LIMTER
(Complete control over your CPU)
(Per core control over min/max)
(You can set governors for each core)
$GOVERNORS
-ALUCARD
-BLU_ACTIVE
-DYNAMIC_INTERACTIVE
-LIONHEART
-NIGHTMARE
-SMARTMAX
-ZZMOOVE
$HOTPLUGS
-AUTOSMP
-INTELLI-PLUG_5.0
-MSM AUTO HOTPLUG
-BRICKED_HOTPLUG
$THERMAL
FRANCO THERMAL
$I/O SCHEDULERS
-BFQ
-CFQ
-DEADLINE
-FIOPS
-FIFO
-NOOP
-ROW
-SIOPLUS
-TRIPNDROID
-VR
-ZEN
$GOVERNOR TUNEABLES
-ADRENO_IDLER TUNABLES
-SIMPLE_ONDEMAND TUNABLES
$GPU SPECIAL ITEMS
-A BUTTON YOU CAN SELECT TO INCREASE PERFORMANCE
$$$OTHER FEATURES$$$
-ADD RANDOM
-I/O TUNABLES
-LOW MEMORY KILLER
-KEXEC
-KCAL
-Z-RAM
-VIRTUAL MEMORY
-MEMORY TWEAKS
-POWER SUSPEND OPTIONS
-USB FASTCHARGE
-ADAPTIVE LMK
-FRANDOM
-LMK PROFILE
-WIFI SCAN INTERVAL
-VM HEAPSIZE
-ALLOW PURGING OF ASSETS
-GENTLE FAIR SLEEPERS
-ARCH POWER
credits
@ak [MENTION=4800121]
and Thanks a lot to These developers, filled with great humanity and courage:
@Robbiel811, @Dorimanx, @xboxfanj, @apb_axel, @faux123, @myfluxi, @showp1984, @imoseyon, @savoca, @poondog , @CallMeAldy @Yoinx @Sultanxda
And also:
@andreilux, @flar2, @CL3Kener, @DerRomtester, @renderbroken, @Alucard24, @stratosk, @hellsgod, @yank555-lu, @kingbabasula, @osmosis, @gianton @APOPHIS9283 @XileForce
XDA:DevDB Information
Lightning kernel, Kernel for the OnePlus One
Contributors
nikhil18
Source Code: https://github.com/nikhil18/lightning-kernel-bacon
Kernel Special Features:
Version Information
Status: Stable
Created 2015-11-10
Last Updated 2017-07-30
CHANGELOG
DOWNLOADS
MIRROR
DOWNLOADS
MY PROFILES THREAD
Nice, will try out and report
YEEEEES!
I've a problem with Omnirom. It doesn't boot, it was stuck at OnePlus logo.
Now, flashing this kernel, it works perfectly!! U made my day!
People with this problem: @benjmiester @skad @smashdroid @bnwgraaf @sas.mar @mustang_ssc ! Try this kernel and it will boot!!!
It's finally fixed my problem, @KenjiHannya !
Thanks u @nikhil18 !!!
While I did not succeed in booting the Omni rom, I have CM13 installed at the moment.
Perhaps I will try Omni in combination with this kernel.
But for sure, do I install in this order?
1 - TWRP recovery (does it work with 2.8.7?)
2 - this Lightning kernel
3 - Omnirom
4 - Gapps
Am I right, or do I have to flash in another order?
1 - Omnirom
2 - Lightning kernel
3 - Gapps
bnwgraaf said:
While I did not succeed in booting the Omni rom, I have CM13 installed at the moment.
Perhaps I will try Omni in combination with this kernel.
But for sure, do I install in this order?
1 - TWRP recovery (does it work with 2.8.7?)
2 - this Lightning kernel
3 - Omnirom
4 - Gapps
Am I right, or do I have to flash in another order?
Click to expand...
Click to collapse
OnmiROM, this kernel, Gapps.
Tnx ?
Do you goes have working mobile data after flashing this?
Hello @Darth I am very sorry for posting this in orignal android development section so can you please move it to android development section thanks
nikhil18 said:
Hello @Darth I am very sorry for posting this in orignal android development section so can you please move it to android development section thanks
Click to expand...
Click to collapse
No worries!
And moved. Thanks for contributing to the site. :good:
itslels said:
Do you goes have working mobile data after flashing this?
Click to expand...
Click to collapse
Yeap
Update version 02
changelog
added zen decision hot plug driver enabled by default thanks @DerRomtester
elemantalx,darkness and alucard governor added
changed default governor to smartmax
and guys i could not add zen hotplug to synapse but it is activated by default so can you test and report how is the battery life
Tnx ?
---------- Post added at 04:59 PM ---------- Previous post was at 04:57 PM ----------
Please do not stop their work. We need options to AOSP CAF Kernel
Thank you so much!! The Phone is a dream with your Kernel!
The Performance and the battery life is much better!
I was always looking for the zen hotplug!
I use it with conservative governor
Gesendet von meinem A0001 mit Tapatalk
even supports aosp paradox rom
guys from a tester i have found out that my kernel is even compatible with aosp paradox rom and even fixes wifi on that rom
Juanmiwow said:
YEEEEES!
I've a problem with Omnirom. It doesn't boot, it was stuck at OnePlus logo.
Now, flashing this kernel, it works perfectly!! U made my day!
People with this problem: @benjmiester @skad @smashdroid @bnwgraaf @sas.mar @mustang_ssc ! Try this kernel and it will boot!!!
It's finally fixed my problem, @KenjiHannya !
Thanks u @nikhil18 !!!
Click to expand...
Click to collapse
Good lucky mate
good work @nikhil18
Man I just can't get it to work at least.on omni 11-10 build. Tried fresh install, tried installing on already setup... Tried 0.01 and 0.02. It just bootloops. Maybe a prob with twrp 2.8.7? or newest omni build? Any ideas.
benjmiester said:
Man I just can't get it to work at least.on omni 11-10 build. Tried fresh install, tried installing on already setup... Tried 0.01 and 0.02. It just bootloops. Maybe a prob with twrp 2.8.7? or newest omni build? Any ideas.
Click to expand...
Click to collapse
Are you using the twrp recovery recomended in omni rom thread
In the op
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!DISCLAIMER!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
----NOTICE----
ATM this kernel is only compatible with motion rom v17.0,5.x ,6.x and other based roms.
This Kernel only supports ms013g and ms01lte.
BUILDS STARTING FROM R3 WILL SUPPORT 6.X MM BASED ROMS TOO!
!!!!WANING!!!!
Before posting, DO read EACH and EVERY "OP" POST made by me!! Any post which is rude, report bugs incorrectly,USELESS POSTS or ask for ETAs, WILL be REPORTED to the MODS!
All information you may be looking for can be found either in this thread or under F.A.Q or by performing a simple search. Think before you post.You have been warned!!!
Kernel features:-
Build with Latest UBER GCC 5.3.1 Toolchain(4/1/2016 - 5.3.1 UBERTC)
Based on latest sources by TW-LL-msm8226
Kernel compressed with xz compression
-O3 and other optimisation
disbaled gfs and enabled arch power
New CPU Governers-yankactive,zzmove,smartmax,yankdemand,intelliactive,elementalx,ondemandplus,bluactive
CPU OC/UC to 1.6 Ghz/192Mhz
GPU OC/UC to 533/100 Mhz
Several new i/o(zen,vr,sio,fiops,tripndroid,etc)
Added MSM Hotplug & Intelliplug
Using Anykernel2 by osmosis
Removed MPdecision
Added Kcal & Ksm
Added powersuspend
USB fast Charge
msm limiter
Franco's thermal drivers
headset high performance & soundcontrol v3.6
introduced workqueues
Fully permissive kernel
Simple GPU Algorithm
disabled DVFS and other stuffs
Busybox v1.24.2
Enabled Advanced Tcps(default:Westwood)
Upstream updates to f2fs,zram,etc.
Adreno idler
Lz4 compressor and Lz4 compressed zram
entropy updates and tuned zram values
miscellaneous updates
More(i forgot)
****NOTICE****
This is a kernel,so please do not expect REGULAR builds.New builds can be rolled out the same day or once in a week or maybe once in a month.
I will not add lots of fancy stuffs.whatever you see here goes under several tests first and if it performs well,then it is added.Suggestions are always welcomed!
Do not post external links or make mirros without my permission!
Please read FAQ properly, will try to answer all questions there and don't post uselessly and get yourself in trouble.
Recommended app for tuning: Kernel Adiutor
The lastest version TWRP (3.0.0.0) IS RECOMMENDED!
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
Flash the Kernel.zip
WIPE DALVIK/CACHE (for good measure)
Reboot!
Bugs:
hotspot not working in tw and 5.x roms
bluetooth speaker issues
simple omdemand crash
Downloads and Changelog in Post #2
NOTE:First boot may take some time,so while its booting,don't forget to press the thanks button!(its free)
Credits:
@aapav01 and the Tw-LL-msm8226 team
@Tarun93 & @Luffy.d for answering my noob questions :silly:
@neobuddy89 @hurtsky @osm0sis @franciscofranco @faux123@savoca @Alucard24 @myfluxi @Cl3Kener @h2o64
and all other great developers!
(If i forgot your name,then please Drop me a PM!!)
Thanks to my tester(s):
@Anxdafan
@praveensingh569
@Subhashis
@Swp1996
XDA:DevDB Information
Infected Kernel, Kernel for the Samsung Galaxy Grand 2
Contributors
neonkat
Source Code: TW/5.x,6.x
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2016-05-02
Created 2016-04-16
Last Updated 2016-05-15
----Downloads----
Ms013g Folder
TW-5.1.1/5.X
AndroidFileHost(Click ME!)
6.x marshmallow
AndroidFileHost(Click ME!)
-----------------------------------------------------------------------------
Ms01lte Folder
AndroidFileHost(Click ME!)
DO NOT CREATE MIRRORS!!IF LINKS ARE NOT WORKING THEN TELL ME!!!
Changelog:
Code:
R4;(x-05-16)
*switched to uber tc 5.3.1
*removed graphite and added other optimisations
*disabled some stuffs to save battery+performance
*GPU OC/UC to 533/100 Mhz
*CPU UC to 192 Mhz
*add msm_limiter
*fixed thermals,now less heating
*added:elementalx,ondemandplus,bluactive & removed intellidemand,intellimm
*tweaked governers
*enabled ksm
Older builds:
Code:
R3:(02-5-16)[only 6.x]
*same as R1 and R2
*-O3 and Graphite optimisation
*disabled gfs and ebaled arch power
*disabled zram
*improved cpu and gpu clocks
R2:(21-4-16)
*Franco's thermal drivers
*new gov.-intellidemand,intelliactive,intellimm
*wakelock toggles
*intelliplug
*simple gpu algorithm
*new i/o and updated other i/o's
*headset high performance & soundcontrol v3.6
*introduced workqueues
*Fully permissive kernel
*disabled DVFS
*fixed kcal
*lots of miscellaneous updates
*enabled last kernel_logs
R1:(16-4-16)
*initial release
FAQ
Q)How is the kernel?does it improve stuffs?
A-EITHER USE IT OR GTFO.
Q)does this kernel work with xyz rom?
A-this works with 5.x,6.x and tw ll based roms.
Q)Kernel didn't flashed!
A-put the kernel.zip in internal sd and flash.
Q)How to use Color Control?
A-use kernel adiutor or savoca's kcal controller app
Q)Developer!i am having a issue!
A-Get me a logcat and a dmesg with proper explanation to reproduce it.
Q)can you share good settings?
A-sure,check post #4
Q)will this work with v16.x?
A-worked for a few peeps so you can try it yourself
Q)why is there no boot.img?
A-because we are using anykernel script.
Q)will this fix offline charge bug?
A-their is no offline charge bug,only offline charge animation is not working.will fix it in future.
Profiles for my kernel
#Gaming(performance)
gov-performance/intelliactive/elementalx
max cpu freq-1593Mhz
i/o-zen/fiops
turn off adreno idler
thermals to 55-58^
#Balanced
gov-yankactive/yankdemand/intellidemand
max cpu freq-1401Mhz
i/o-sio
#Heavy Multi-tasking
gov-zzmove/ondemandX/blu_active
max cpu freq-1593Mhz
i/o-bfq
#Insane battery life
gov-smartmax/powersave
max cpu freq-1190Mhz/1094 Mhz
i/o-noop/fifo
P.s-very few stuffs but will be updated as new things will be added to kernel.
Want your our setup?follow this.
Remember the Drill
reserved ???
nice work buddy
Bro Will it fix dim color problem??
M still facing this issue in motion v17...
Finally someone liten my request thank you
VARUN KHASIA said:
Bro Will it fix dim color problem??
M still facing this issue in motion v17...
Click to expand...
Click to collapse
i have used the rom for a while and i got no such issues and i read that some users fixed this issue by proper installation.do check motion rom thread.
if you still have issues,then let me know,will try to fix it.
Till then,enjoy and let me know what improvements i can add in kernel.
@neonkat can u post source of this kernel
Edit : I got
neonkat said:
i have used the rom for a while and i got no such issues and i read that some users fixed this issue by proper installation.do check motion rom thread.
if you still have issues,then let me know,will try to fix it.
Till then,enjoy and let me know what improvements i can add in kernel.
Click to expand...
Click to collapse
Bro I installed rom with correct steps.. But still facing.. Bro if u can try double tap screen to wake, swipe screen to wake.. About the performance I m testing this.. Tell u soon..
VARUN KHASIA said:
Bro I installed rom with correct steps.. But still facing.. Bro if u can try double tap screen to wake, swipe screen to wake.. About the performance I m testing this.. Tell u soon..
Click to expand...
Click to collapse
okay,will look into it.
yeah,i have added that to my todo list for next builds.(was having some issues so dropped for R1).
EDIT: i need some testers,if you want to join then drop me a Pm.
adityaupreti said:
@neonkat can post source of this kernel
Edit : I got
Click to expand...
Click to collapse
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
neonkat said:
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
Click to expand...
Click to collapse
Ok bro i will test and tell
---------- Post added at 11:01 PM ---------- Previous post was at 10:46 PM ----------
neonkat said:
please test with your rom(adityarom)and let me know if it works well.
waiting for your reviews
Click to expand...
Click to collapse
bro jst flashed kernel really awsm my battery is now improved and boot time also Discreased smooth going to test some features now
neonkat said:
okay,will look into it.
yeah,i have added that to my todo list for next builds.(was having some issues so dropped for R1).
EDIT: i need some testers,if you want to join then drop me a Pm.
Click to expand...
Click to collapse
Bro I tried it.. Games are lagging.. Like subway surf.. Otherwise good..
VARUN KHASIA said:
Bro I tried it.. Games are lagging.. Like subway surf.. Otherwise good..
Click to expand...
Click to collapse
maybe because of the ram,for me(on fresh install)games were going smooth.
try switching to other governers(like zzmove,yankdemand).
will look into ram management.
neonkat said:
maybe because of the ram,for me(on fresh install)games were going smooth.
try switching to other governers(like zzmove,yankdemand).
will look into ram management.
Click to expand...
Click to collapse
Ohk bro..try changing gov.
add fm modules ?
In this kernel will be added FM radio modules ,so we have a full-fledged FM radio ?
Siemens92 said:
In this kernel will be added FM radio modules ,so we have a full-fledged FM radio ?
Click to expand...
Click to collapse
nope.
you may ask rom-developer.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Linux version 3.10.108
Compiled with UBER 5.3.1 optimized
Synced with latest CodeAurora changes
Improved memory management
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
IntelliPlug CPU hotplug (by faux123)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.9
Vibration intensity control
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Permanently fixed screen flickering: SELinux works fine in permissive or enforcing mode.
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Drastically improved CPU thermal control: should react approximately from 40°C and end if lower than 35°C are reached.
Otherwise it'll keep trying to cool the device, protecting, mainly, the battery.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver.
Use the hidden LED as a notification light.
Enabled forced consistency checks for F2FS (/data).
Multi-Cluster Power Management (less CPU battery drain).
Advanced Power Management (emulated).
SMT (Simultaneous Multi-Threading).
Fixed temperature handling.
Special Features
Double Tap Wake
Download folder
Installation instructions
Boot into TWRP.
Flash the kernel zip.
Reboot.
If you like my work, press Thanks :highfive:
Credits
lineageos
@facuarmo
XDA:DevDB Information
[Kernel][N][DT2W] SomeFeak Reborn Kernel for Harpia, Kernel for the Moto G4 Play
Contributors
srfarias
Source Code: https://github.com/srfarias/somefeak-reborn_kernel_motorola_harpia
Kernel Special Features:
Version Information
Status: Beta
Created 2018-09-21
Last Updated 2018-09-21
Reserved
Changelog
2018 - 09 - 21
Wifi issues fixed
Camera fixed
Sound issues fixed
Security patches
A lot of caf changes
Binder changes
And more more things that u don't need to know
Reserved
Very very very Thanks sir¡
Enviado desde mi Moto G Play mediante Tapatalk
Testing... after 12hs remain 100% rock solid!!!
Good work!!!
Hi,
Can it be flashed on top of stock rom? Or will it only work with Lineage?
Thanks
________________
Works fine with stock tested today.
Can't connect to camera. Resurrection Remix 5.8.5
Sent from my Moto G Play using Tapatalk
what we needed is an updated oreo kernel
hp420 said:
what we needed is an updated oreo kernel
Click to expand...
Click to collapse
I'm working on that.. (Busy week - exams)
Perfect kernel
Enviado desde mi Moto G Play mediante Tapatalk
Possibly add sweep to wake from your other Kernel: https://forum.xda-developers.com/g4-play/development/kernel-srfarias-kernel-harpia-t3849015.
BTW, Whats the main difference between both of them except s2w and features not listed on the kernel page.
Great kernel, have a little bug fm radio not work on stock ROM, overclock Is perfect !!!!!
Labest BR
Great Kernel, but how can I enable the notification LED ??:confuso:
Se reinicia en Nougat, alguna solución?
Isn't this compatible with oreo ROMs?
Working osprey ?
---------- Post added at 05:21 PM ---------- Previous post was at 05:21 PM ----------
Working in pie/oreo?
Will this work on oreo CosmicOS? Im not able to restore backups via twrp, so i need to know if this works so i dont have to clean flash my ROM again
Greetings from Brasil!
Compatible with pie??
saikat08 said:
Compatible with pie??
Click to expand...
Click to collapse
No, dear mate, according to the OP: is only compatible with Nougat.
Pie ROMs have a better kernel implemented and it is Not neccesary to install another. Also, if you want to report a bug (for example in AOSPExt Pie ROM) you will be rejected because you are using other Kernel than the default (better) of the ROM
By the way jaja Do you really want to use a kernel that says: "Feak"??? :laugh: :laugh: :laugh: :laugh: :laugh:
Feak:
Slang for fecal matter, ass residue, small granules of sh1t, or the small invisible smelly fecal matter on your hands after a dump. You can't see it but you can smell it.
Click to expand...
Click to collapse
Source: https://www.urbandictionary.com/define.php?term=Feak
BouncingState said:
No, dear mate, according to the OP: is only compatible with Nougat.
Pie ROMs have a better kernel implemented and it is Not neccesary to install another. Also, if you want to report a bug (for example in AOSPExt Pie ROM) you will be rejected because you are using other Kernel than the default (better) of the ROM
By the way jaja Do you really want to use a kernel that says: "Feak"??? :laugh: :laugh: :laugh: :laugh: :laugh:
Source: https://www.urbandictionary.com/define.php?term=Feak
Click to expand...
Click to collapse
Still can't find though about nougat but yeah you are right as it wasn't been developed for oreo yet, so definitely not for pie.
I agree pie roms comes with better kernel, but it's just they don't provide hotplugs and some more features like dtw etc. that's why I was looking for a custom kernel.
BouncingState said:
By the way jaja Do you really want to use a kernel that says: "Feak"??? :laugh: :laugh: :laugh: :laugh: :laugh:
Source: https://www.urbandictionary.com/define.php?term=Feak
Click to expand...
Click to collapse
Haha I didn't knew that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StockOverClock / Alpha Kernel for Nexus 6P
This kernel is based on stock kernel that ships with the ROM.
I have made some changes to the kernel to get more performance at the same power cost.
Features
Overclocked Small and Big Clusters
Added ElementalX CPU Governor
Added a lot more CPU Governors
Added a Bunch of CPU Hotpugs
Added many wake gestures and camera gesture
Performance optimized
Gaming Ready
Notice
For the kernel to work properly, you have to turn off Core Control in Thermal section by using any Kernel Manager app.
Choose ElementalX Governor for CPUs for best results.
Don't flash it in my (@hk1271) builds as I've made it specially for other Android 10 ROMs and will integrate this kernel in my builds from next Updates .
Downloads
MEGA
I am not responsible in any way for anything that happens to your device in the process of installing.
Code:
[B]Please familiarize yourself with flashing a Custom Kernel before attempting to flash the it.[/B]
[LIST]
[*][B]Make sure you have TWRP FBE recovery for Android 10[/B]
[*][B]Download the Kernel Zip[/B]
[*][B]Boot into recovery[/B]
[*][B]Flash Kernel Zip[/B]
[*][B]No need to Reflash Magisk ![/B]
[*][B]Reboot to System[/B]
[*][B]First boot may take up to 10 minutes.[/B]
[*][B]Enjoy ![/B]
[/LIST]
If someone wants to donate, please do so via this PayPal link:
PayPal Link
XDA:DevDB Information
[KERNEL][10.0] Alpha Kernel -v3.0 [Angler], Kernel for the Huawei Nexus 6P
Contributors
hk1271
Source Code: https://github.com/hk1271/android_kernel_huawei_angler-10/tree/Custom
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2020-06-30
Created 2020-06-12
Last Updated 2020-06-30
Update v2.0
Added ElementalX Governors
Update v3.0
*Added wake gestures (doubletap2wake, sweep2sleep, sweep2wake)
*Added camera launch gesture
*Enabled haptic feedback when a gesture is detected
*Enabled Aggressive multi core power saving
*Added Bricked Hotplug
*Added IntelliPlug Hotplug
*Added Alucard Hotplug
*Added BioSchock , Darkness , Wheatley , Hyper , Nightmare , Pegasusq and SmartmaxEPS CPU Governors.
*Hotplugs and gestures can now be toggled from any Kernel manager app .
amazing ..thanks ??
Thus this support nethunter
Boahen said:
Thus this support nethunter
Click to expand...
Click to collapse
Do you see any indication above or in the kernel source, that the developer has added mac80211 or for that example HID support?
Update v3.0
*Added wake gestures (doubletap2wake, sweep2sleep, sweep2wake)
*Added camera launch gesture
*Enabled haptic feedback when a gesture is detected
*Enabled Aggressive multi core power saving
*Added Bricked Hotplug
*Added IntelliPlug Hotplug
*Added Alucard Hotplug
*Added BioSchock , Darkness , Wheatley , Hyper , Nightmare , Pegasusq and SmartmaxEPS CPU Governors.
*Hotplugs and gestures can now be toggled from any Kernel manager app .
Update .. amazing ...!!! Thanks .. hardik ?
This kernel and your recommended settings just made my phone flyinggg <3 You beautyyy
Device heating. Random restart, sometimes. Screen wake up glitch.
Can you suggest me the settings
Thermal
In the header said that we have to turn off core control. It is recommended to activate VDD, soC limit, or none?
Nicodr63 said:
In the header said that we have to turn off core control. It is recommended to activate VDD, soC limit, or none?
Click to expand...
Click to collapse
nope, just turn off core control and turn msm temperature on or soc limit ( varies which kernel manager you're using)
Ata Ur Rehman said:
nope, just turn off core control and turn msm temperature on or soc limit ( varies which kernel manager you're using)
Click to expand...
Click to collapse
Okey thanx man!
I have an other question. In the latest version of Havoc there is alpha kernel but version 4.0 but the latest stable version on the page is 3.0.
Do you know if 4.0 is stable?
yes they all are stable. havoc, bliss superior already have alpha kernel that means you don't need to flash on those rom. this kernel here is only for those android 10 roms that doesn't have alpha kernel like lineage, pe etc.
Ata Ur Rehman said:
yes they all are stable. havoc, bliss superior already have alpha kernel that means you don't need to flash on those rom. this kernel here is only for those android 10 roms that doesn't have alpha kernel like lineage, pe etc.
Click to expand...
Click to collapse
Oh, it already had this modified kernel? Then, how can I test Havoc/Bliss with the default kernel?
yourrealking said:
Oh, it already had this modified kernel? Then, how can I test Havoc/Bliss with the default kernel?
Click to expand...
Click to collapse
you can't, it'll cause bootloop or brick.
Thank you for your work on nexus 6p.
In addition, could you tell me does this kernel support f2fs?
zhxhwyzh14 said:
Thank you for your work on nexus 6p.
In addition, could you tell me does this kernel support f2fs?
Click to expand...
Click to collapse
Nope! f2f was just supported by flash kernel 3 years ago.
Sent from my angler using XDA Labs
Ata Ur Rehman said:
Nope! f2f was just supported by flash kernel 3 years ago.
Sent from my angler using XDA Labs
Click to expand...
Click to collapse
Thank you for your reply.
Has anyone tested it with RR 10?
xxJMarian said:
Has anyone tested it with RR 10?
Click to expand...
Click to collapse
I am testing it now and will give feedback if all goes fine.