Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Hit refresh packages again. Sometimes it takes more than one time.
Same thing happened to me, I ended up using odin....again. Thank god for odin
Sent from my SGH-T959 using XDA App
nick1217 said:
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Click to expand...
Click to collapse
If you cannot get into CWM recovery, than most likely you will have to Odin. If you know how to use adb, then adb the CWM update.zip onto /sdcard and select re-install packages from the normal recovery. If you don't know how to use adb, then you can either learn or follow the directions in this post on how to use Odin. You might want to learn Odin anyways as it is extremely useful if you softbrick without access to recovery.
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions at the end of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. Hopefully it will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
Download the files in the linked thread and follow the directions there or the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
hockeyrcks you arE the man, thanks so much. worked great
nick1217 said:
hockeyrcks you arE the man, thanks so much. worked great
Click to expand...
Click to collapse
Glad I could help you out. Just make sure you keep all the files on your computer in case you have to do it again. I had never had to use Odin until recently. Then I had to use it three times in one day.
I decided to do a factory reset on my rooted SGH i777. When I did the factory reset, the phone was plugged into my computer. Now when I turn on the phone I see the Samsung Galaxy logo and then the screen goes black (no backlight) and the phone is completely unresponsive. Is there any hope to save my phone?
US variants have their own specific fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do. Generally speaking (and this is the only advice I'm prepared to give you as I don't have your specific device, but the advice holds true for all Samsung phones), if you don't have download or recovery modes, you're probably boned.
I'm sure other people will suggest a few 'longshot' things you can try which might have a very very rough chance of working when your thread gets moved to the right place though.
I'd say there is a fairly good chance...
Can you boot into download mode? If so, then it's very likely. Just flash the stock firmware with Odin. You can download the necessary firmware file from the Download Repository. If you need any additional help, just ask.
creepyncrawly said:
I'd say there is a fairly good chance...
Can you boot into download mode? If so, then it's very likely. Just flash the stock firmware with Odin. You can download the necessary firmware file from the Download Repository. If you need any additional help, just ask.
Click to expand...
Click to collapse
I can't boot into recovery or download mode.
dave455 said:
I can't boot into recovery or download mode.
Click to expand...
Click to collapse
Are you using the right button combo? Power+both volume keys.
dave455 said:
I can't boot into recovery or download mode.
Click to expand...
Click to collapse
Generally, a hard bricked phone is one that exhibits no signs of life. If there are any signs of life, buttons light up, boot screen appears, screen flickers, etc, then it is not hard bricked, and is probably recoverable. But first, you need to get it into download mode.
If the phone is hard bricked, you can get it back with jtag repair from a reputable shop such as Mobile Tech Videos.
There are several ways to put the phone into download mode. You should try all of them that you can before you give up.
Recovery mode:
With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.
Download mode:
1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.
4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.
5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".
6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
Thanks for that fantastic explanation!
This worked for me:
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
Now, how do I fix my phone with download mode?
Do I need to put a factory firmware image back onto the phone? It currently has rooted firmware that was working perfectly fine until I did a factory reset.
I would suggest that you flash the latest stock firmware, I777UCMD8 (Android 4.1.2 Jelly Bean) which you can download from the Download Repository. After flashing that you can root using the Framaroot application using the Aragorn exploit.
If you want custom firmware, once rooted you can install either Mobile Odin lite or Mobile Odin Pro and flash a custom kernel which has ClockworkMod Recovery. Following that, you can flash any firmware of your choice.
To get you started, and in case you need them, here are the directions for using Odin to flash the stock firmware (copy and paste):
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85 (recommended). It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) Once the flash is complete, the phone will reboot into system.
Thanks!
With your help, I was able to recover my phone. Thank you! I will be using stock firmware. Last time I had my phone rooted, it was so slow it was unusable.
I tried to reset my phone but it rebooted in the middle of restoring. now when i power on my phone all i get is a green android and what looks like restoring but then the phone just reboots after 3 seconds. if i press power and volume+ /volume- to enter clockwork mod i just get the same thing as when i power on. it looks like the phone is restoring but it just reboots. is there any way i can recover my phone using meta mode or factory mode, as i can't enter recovery. thanks for any help. note: i have tried to recover by this method, without success.
1. Download Lenovo drivers, unzip the archive. Turn off the phone and remove battery. Open device manager and connect the phone to PC. Watch for new devices. It will be displayed as МТ65хх Preloader. You need to be quick, because it will dissapear in some second. Click on it with the right button and select update driver. Point the wizard to the driver folder, it will install the correct driver automatically.
If it doesn't work with removed battery you can try to power on the phone and turn on developer options in settings or enter meta mode – hold Volume Down and Power buttons. Then connect the phone to PC again.
2. Download and extract Recovery zip and Flash tools. Run Flash Tools, click on DL DA All With Check Sum, load the scatter file located in Recovery folder, uncheck Preloader and hit Download (F6). Remove battery from phone and connect it to PC. When done, a green circle will appear.
3. Enter recovery mode – hold Volume Up, Volume Down and Power buttons until you see the logo. Make a backup of your current system first. Install new zip.
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
omkarfrozen said:
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
Click to expand...
Click to collapse
i can't get the phone to connect without the battery, i can only get it in factory or meta mode and in these modes i can't flash any rom.
if you can go into factory mode den mobile's perfectly fine. you just need to flash stock ROM once.
1) switch off your phone
2) open the sp flash tool
3) you will see Scatter-Loading option click it and locate the scatter file (it is present in the ROM folder you downloaded)
4)now press download button
5)after pressing download button connect your phone via USB cable
it may take 5-10 mins n you are done... you don't need to turn your phone ON...
it has worked for me
Hello everybody!
so a while ago i got a sgs3 i9300 with the official rom 4.1 now i wanted to flash marshmallow (CM13).
WHAT I'VE TRIED
- rooting using kingroot (no success on 50% my samsung turned itself off)
- using odin to flash a new ROM: cm-13.0-20160722-NIGHTLY-i9300.zip with the recovery: TWRP - 3.0.2-1-i9300.img.tar
nothing did work
fired odin up with admin rights then i got in download mode using (Vol. down + home button + power button) plugged my usb cable into the phone pressed Vol. up plugged usb into laptop and in odin it should say added or something but that didn't happen so moving on i selected the twrp and then i got this message: all threads completed. (succeed 0 / failed 0). What did i do wrong???
what i used a walkthrough because i really suck at things like this. walkthrough: youtube.com/watch?v=xRHRP5TfOvc
or can you guys point me into a different direction?
thank you already for looking into this.
Good night,
Chaos
Not that im best suited for this, but ill try to help you
NOTE THIS IS ONLY FOR I9300.
ROOT
Step1- Enable USB Debugging, Settings -> Developer Options and enable it.
Step2- Install samsung drivers on pc, so that phone shows up in odin.
Step3- Download CF AUTO ROOT by chainfire
Step4- Put your phone in downlaod Mode.
Step5- Turn on odin and plug your phone (This is what it will look like if your pc recognized phone)
Step6- In odin select CF AUTO ROOT(It shoud look like this, and note i was to lazy to plug my phone so it's not showing up in odin xd)
Step7- Press start in odin, your phone will reset and you are rooted.
RECOVERY
Installing recovery is pretty much same, select in odin recovery and flash it.
ROM
-Download ROM and GAPPS put both files on your phone, put phone in recovery.
- Wipe Dalvik, Cache, Data and System.
-Now go to install and find rom that you downloaded click on it and install, then install gapps.
-Wait for phone to boot up.
And be careful i am maybe wrong in some stuff in guide sooo dont blame me if you brick your phone
And sorry for bad English.
ok i've done what u said it worked! but now i've hit a another wall, now when my phone has booted up and i selected my country when i try to press next a little lock appears left of next and something scrolls down.
any ideas?
Click to expand...
Click to collapse
nevermind, forgot to insert the SIM card all is fine now.
after everything was finished everything install i noticed that my mobile data doens't work, i take/receive call send/receive messages but when i want to use a app that uses internet i don' have internet connection and when i look at the settings everything is greyed out and at preferred network it says: invalid network mode (-1). Ignore what must i do?
any ideas?!!
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
It will display the "Samsung Galaxy Tab S6 | Secured By Knox" logo screen for a few seconds, then switch to the blue "Installing System Update" screen (with the android logo). Installing System Update gets to 28% and stops. Then the rotating icon on the android freezes. Then the device reboots and starts all over again.
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Fedge7 said:
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
It will display the "Samsung Galaxy Tab S6 | Secured By Knox" logo screen for a few seconds, then switch to the blue "Installing System Update" screen (with the android logo). Installing System Update gets to 28% and stops. Then the rotating icon on the android freezes. Then the device reboots and starts all over again.
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Click to expand...
Click to collapse
can you shut it down? try volume down and power button ? if it don't shut down, do this soon as it reboots, hold volume up and down and plug in usb cable to desktop/laptop usb port! it will boot into download mode!
N1NJATH3ORY said:
can you shut it down? try volume down and power button ? if it don't shut down, do this soon as it reboots, hold volume up and down and plug in usb cable to desktop/laptop usb port! it will boot into download mode!
Click to expand...
Click to collapse
I can't actually shut it down. If I start holding power+voldown right after it boots, the tablet does reboot before getting stuck at 28%. But it reboots--it doesn't power off.
I tried download mode and that actually seemed to work! Specifically, I left the tablet overnight in the reboot loop until the battery drained. Just now, I held down volup+voldown and plugged it into my laptop. I got the green "Warning/Custom OS" screen and then pressed volup to continue. The tablet rebooted pretty quickly after that (I'm guessing due to low battery) so I didn't get a good look at the download mode options.
Once I'm in download mode, can I factory reset the tablet? I don't need to preserve any data/apps/settings.
Fedge7 said:
I can't actually shut it down. If I start holding power+voldown right after it boots, the tablet does reboot before getting stuck at 28%. But it reboots--it doesn't power off.
I tried download mode and that actually seemed to work! Specifically, I left the tablet overnight in the reboot loop until the battery drained. Just now, I held down volup+voldown and plugged it into my laptop. I got the green "Warning/Custom OS" screen and then pressed volup to continue. The tablet rebooted pretty quickly after that (I'm guessing due to low battery) so I didn't get a good look at the download mode options.
Once I'm in download mode, can I factory reset the tablet? I don't need to preserve any data/apps/settings.
Click to expand...
Click to collapse
You cannot reset the tablet from Download mode afaik- You need to enter Recovery Mode to do that.
You can however, flash stock from Download mode using Odin (3.13.3 is best). If you're not confident with doing that, your best option is Factory Reset in Recovery Mode. Hold Volume Up and Power when the Tablet is booting, let go when you see the Samsung logo. The timing can be tricky, but you should be able to do it. Also, you can force a reboot with Volume Down and Power.
Alternatively, if factory reset doesn't work, since you're completely stock, you will still be covered under warrenty.
bartleby999 said:
your best option is Factory Reset in Recovery Mode. Hold Volume Up and Power when the Tablet is booting, let go when you see the Samsung logo.
Click to expand...
Click to collapse
Thanks for the suggestion. I have tried this many many times. I've tried letting go of the buttons at different times. I've tried holding volup while letting go of power. I've tried this a ton of different ways, and no matter what, the tablet always shows the "Installing system update" screen. Some googling has led me to believe that sometimes, when performing a factory reset, the "Installing system update" screen shows up right before the normal recovery screen. Is it possible that the tablet is trying to get to recovery mode, but can't get past this first step?
Fedge7 said:
Is it possible that the tablet is trying to get to recovery mode, but can't get past this first step?
Click to expand...
Click to collapse
Honestly, I don't know - I'm not an expert but I guess it's possible that the update failed and corrupted both System and Recovery.
You'll be covered under warrenty, so maybe just return the Tablet from where you purchased or direct to Samsung, could take a while given the current situation though I guess. If you have a PC, then I think the best option would be to just flash stock yourself, since that's probably all Samsung will do. Even if that doesn't work you'd still be covered under warrenty, as far as I'm aware attempting to flash stock doesn't trip Knox.
Here is solution to unbrick your device!!!
Fedge7 said:
My Tab S6 tried to auto-install an update yesterday (it is rarely connected to Wifi/internet). It then rebooted. Since then, it's been stuck in a boot loop.
...
Edit: the tablet is 100% stock. It's not been rooted or had any custom ROMs loaded.
I have tried getting to recovery mode, by holding power+volup while it boots. This doesn't seem to change the behavior at all. Any advice is much appreciated.
Click to expand...
Click to collapse
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
FYI, I got in this situation, and the previous post did work for me, just takes good timing! Thanks!!!!
Same issue today for me. My tablet showed different screen with green and red text, it allowed me to delete app data, then booted into safe mode, then i had to do factory reset and now i am screwed, as it is refusing to restore any apps and their settings. I will try to flash it back to Android 9, maybe then it will do the restore. I forgot to do any manual backup to SD or so.
Edit: the device upgraded to 10, but reset itself after about 10 minutes of use.
Edit2: i found what caused it. It is caused by Nova Launcher, if i try to set wallpaper.
Just found a news article that there is a RGB/sRGB problem with wallpapers. It might be the problem i had.
I am adding a screenshot of the result.
Yeah, I had that kind of reboot loop from a wallpaper that I downloaded
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Bravo!!
Works for me.
Many thanks
I can get into download mode. But it kicks me out within a few seconds. Any help please
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now. I cannot access recovery mode or download page anymore,
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Really messed up big time
Just a thought... Can this be restored from service center?
Thank you in advance.
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Genpis said:
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Click to expand...
Click to collapse
Did you use HOME CSC or the non HOME CSC when flashing?
Genpis said:
I have the same problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
Click to expand...
Click to collapse
Try to install a castom rooted rom which has pre installed also Twrp.
[MAGISK Rom / Firmware base convertor) 420rom-T860/5 - V13.3- CUE1 - ANDROID 10 - OneUI 3.1 - Sec Patch 05/2021 - Released 06/07/2021
WELCOME TO 420 ROM - MAGISK ROM FOR SAMSUNG GALAXY TAB S6 WiFi/4G (T860/5)! 420rom Telegram-Group: Please bear in mind that things will be added as and when my learning and time permits (being a dad with a family and having ADHD myself means...
forum.xda-developers.com
Download the android 11 last rooted rom from there. You install it with odin as as a normal original rom.
Disable in odin auto reboot. After rom install, restart manually and press the correct buttons immediately to boot in Twrp and not to system. Format (not wipe) data from there and reboot to system. If you are lucky it will work..
(I hope you unlocked bootloader before try to root. If you haven't unlocked bootloader this won't work also).
Moe5508 said:
Here is solution to unbrick your device!!!
Despair not...I have just come from resolving this exact situation not 30 minutes ago. I'd been trying to flash (using Odin as I decided to stay on Stock and not root this device, for a change) the latest OneUI2.1 releases for my device (SM-T865 - LTE version) and boom in the middle of the Odin update, the flash just failed...I then couldn't reboot and get into neither Recovery, nor Download Mode because it appears my bootloader and recovery both got corrupted.
Here's what you need....
1. Odin app for PC (am on Windows)
2. Your device's Stock firmware (sammobile firmware archive)
3. You will need someone to help you boot the device directly into Download mode (and this is the tricky part because for most of us we are used to get into Bootloader by using the key combination (from Powered Off device) Vol+ and Power On at the same time to get into stock recovery and then scrolling down to option 2 in this menu, "Reboot to Bootloader". Well now you are going to boot directly into Bootloader mode. Here's how you do it...
4. Get your friend to line up the USB-C cable into the port of the device, but DO NOT press it in...yet
5. Press Power off and Vol- buttons at the same time to turn off the device
6. And now you have to to be super fast: if device starts to turn on on its own, YOU press and hold Vol+ and Vol- both at the same time while YOUR FRIEND pushes the USB cable fully into the port - you should now have booted directly into Download mode. (if not repeat this, and remember to be super fast and sync with your friend pushing in the USB cable)...
7. When you get into Download mode, then you are home and dry...
8. Select ONLY the Bootloader file (BL...XX...) in Odin, make sure only "reset time" and "reboot" are ticked, and flash
9. When device reboots, press Vol+ and Power combo to get back into Bootloader mode again...but I think device will reboot into Download mode on its own
10. Now select all the files from your Stock file into the various tabs (BL, CP, CSC, AP...) do not select HOME_CSC as we want to flush this device clean...
11. Flash, and voila...success - you will have lost all your data but rather that than losing the device...
12. Feedback here and let us know if this works? For reference for others in the future...
Click to expand...
Click to collapse
Why flashing only the bootloader first? At the moment I'm trying to recover my s20 fe from a bootloop without losing my data
sosimple said:
Try to install a castom rooted rom which has pre installed also Twrp.
[MAGISK Rom / Firmware base convertor) 420rom-T860/5 - V13.3- CUE1 - ANDROID 10 - OneUI 3.1 - Sec Patch 05/2021 - Released 06/07/2021
WELCOME TO 420 ROM - MAGISK ROM FOR SAMSUNG GALAXY TAB S6 WiFi/4G (T860/5)! 420rom Telegram-Group: Please bear in mind that things will be added as and when my learning and time permits (being a dad with a family and having ADHD myself means...
forum.xda-developers.com
Download the android 11 last rooted rom from there. You install it with odin as as a normal original rom.
Disable in odin auto reboot. After rom install, restart manually and press the correct buttons immediately to boot in Twrp and not to system. Format (not wipe) data from there and reboot to system. If you are lucky it will work..
(I hope you unlocked bootloader before try to root. If you haven't unlocked bootloader this won't work also).
Click to expand...
Click to collapse
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
jointer said:
Same issue today for me. My tablet showed different screen with green and red text, it allowed me to delete app data, then booted into safe mode, then i had to do factory reset and now i am screwed, as it is refusing to restore any apps and their settings. I will try to flash it back to Android 9, maybe then it will do the restore. I forgot to do any manual backup to SD or so.
Edit: the device upgraded to 10, but reset itself after about 10 minutes of use.
Edit2: i found what caused it. It is caused by Nova Launcher, if i try to set wallpaper.
Click to expand...
Click to collapse
did you managed to not lose your data?
jrdef said:
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
Click to expand...
Click to collapse
Wiping cache partition in Recovery and reflashing the firmware are basically your only 2 options
jrdef said:
Any tips in recovering my stock s20 fe from a bootloop without losing data? already tried Odin but without success the first try
Click to expand...
Click to collapse
Flash in odin the same rom you had. There are 2 csc files in rom, which you use 1 in odin one. Try use the "home csc". Home csc keep KEEPS your data. If you're lucky it may work. (It would work in keeping your data 100% if your rom was ok. Because it isn't you have some changes to work.).
You must try with same rom or newer.
CSC – If you flash the CSC file, it’ll perform a factory reset of your Galaxy device and wipe all data while installing a new firmware to bring your device to the same state as it was when you purchased it. Go with CSC if you want a clean installation.
HOME_CSC – On the other hand, if you want to keep your Samsung phone’s data and settings even flashing the stock firmware, you can select the HOME_CSC file.