How to get TWRP working on 24B. Using the Autorec app works but you get secure boot error.
Sent from my VS985 4G using Tapatalk
Use LG Flash Tool 2014 to flash the 23C KDZ, use autorec to flash TWRP, then flash JasmineROM 8.0.
roirraW "edor" ehT said:
Use LG Flash Tool 2014 to flash the 23C KDZ, use autorec to flash TWRP, then flash JasmineROM 8.0.
Click to expand...
Click to collapse
I don't want to flash back to 23C I want to be on 24B. Can't I just flash the 24B jasime rom boot and aboot images?
Sent from my VS985 4G using Tapatalk
NBreunig3 said:
I don't want to flash back to 23C I want to be on 24B. Can't I just flash the 24B jasime rom boot and aboot images?
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Jasmine ROM is 24b, but in order to install twrp, you have to have the 23C boot images in order to flash TWRP. Once you have TWRP flashed, you can then flash Jasmine ROM and be on 24b (kernel and software wise). Boot would still be 23c, but boot isn't going to affect much if anything, but TWRP hasn't been re-bumped to work with the 24b boot images.
iBolski said:
Jasmine ROM is 24b, but in order to install twrp, you have to have the 23C boot images in order to flash TWRP. Once you have TWRP flashed, you can then flash Jasmine ROM and be on 24b (kernel and software wise). Boot would still be 23c, but boot isn't going to affect much if anything, but TWRP hasn't been re-bumped to work with the 24b boot images.
Click to expand...
Click to collapse
So there is no way to get TWRP on 24B without going to 23C and then flashing 24B jasmine rom?
NBreunig3 said:
So there is no way to get TWRP on 24B without going to 23C and then flashing 24B jasmine rom?
Click to expand...
Click to collapse
Correct. As I stated, twrp has not been updated to work with the new 24b boot image. But the boot image isn't important for 24b.
If you really want, if you are already on 24b, you can go get the following app from Google Play (as long as you are rooted) and it will downgrade your boot image for you and install TWRP and you'll still be on 24B. That's what I did after I upgraded to 24B via OTA:
https://play.google.com/store/apps/details?id=b007.autorecvs985
Again, this is as long as you are on stock LP and rooted. I used this app to install TWRP and then I was able to flash Jasmine ROM 8.0. I wanted to go to Jasmine ROM 8.0 because it was debloatable and then I installed the SkyDragon kernel as well which is tweaked for even better battery savings.
So, you can use the app listed above to flash TWRP and stay on stock 24B, or you can then flash other ROMs and it won't matter. You just have to run the above app to "fix" the boot image so that TWRP can be installed. That is, until a new version of TWRP is released that is made to work with 24B boot image. But, until then, you have to downgrade the boot image and this app does that for you.
Nice! I've been looking for this
I was stock on 24b rooted and used this autorec app and it soft bricks the phone into the security error... tried twice to make sure i was doing it right and still the error persists! I was on stock lollipop 24b only rooted.
So if you're on 24 b rooted do not use this app
Hi,I am in similar situation. While booting, device says "security error"
I have downloaded relevant kdz flash tools etc and setup. But how do I enter the download mode?
When I press volume up and insert the usb cable, LG logo displayed with vibration and gets the "security error" back.
Please please help. I am bricked at the moment.
I was on 24b,rooted and happy. Then autorec happened. What a stupidity!
THnaks much!
You have to get the LG flash tool flash the KDZ 23c and go back to stock. Your problem was you were probably on 24 B and tried to install twrp. Which doesn't work with 24b.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
I believe to get into download mode you so the volume button down while plugging the USB in correct me if I'm wrong people
davidstjohn1 said:
You have to get the LG flash tool flash the KDZ 23c and go back to stock. Your problem was you were probably on 24 B and tried to install twrp. Which doesn't work with 24b.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
I believe to get into download mode you so the volume button down while plugging the USB in correct me if I'm wrong people
Click to expand...
Click to collapse
Hold down Volume Up and plug in USB cable. I remember because it's opposite volume button for Download mode than it was on my S3.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 35A_08 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 35A_08 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
roirraW "edor" ehT said:
Hold down Volume Up and plug in USB cable. I remember because it's opposite volume button for Download mode than it was on my S3.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 35A_08 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 35A_08 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Click to expand...
Click to collapse
Thanks!. - ya finally worked. The problem was I was releasing the vol-up button as soon as device vibrated. WRONG.
Its interesting to note that it was not complete reset. The tool just over-wrote the boot partition info (I think) and my device is back.
UFff...waste of 2 hours,but lesson lerant. thanks again all.
Question with LG security screen
roirraW "edor" ehT said:
Use LG Flash Tool 2014 to flash the 23C KDZ, use autorec to flash TWRP, then flash JasmineROM 8.0.
Click to expand...
Click to collapse
If this has been asked and answered i apologize, i have looked for hours, can't find my situation. I ham running the 24b installed twrp with autorec...oops. After the security error the phone won't stay on so how do i flash 23C?
Thank You
Using the LG flash tool..... And the kdz files for 23c
I just rooted my second Verizon G3 that is running 24b. It took several tries to get it done but I finally got root. I then used Flashify to install TWRP. When I reboot into TWRP at the very top of the screen I get a secure boot error message that pops up. Then it goes to recovery and all works normally. When I reboot the system the G3 works fine. Just wondering why I am seeing this error. I assume the latest twrp caused my issue. Guess I'll a
Wait for a fix, it's my wife's G3 and she likes it stock.
I just rooted 2 other G3 phones last week but they were still on 12b.
For everyone having the security error after using autorec, there is a much easier fix than kdz back etc.
Have jasmine 8.0 on your sd card.
Pull your battery and reboot recovery by using volume down and power button. Scroll to factory reset and confirm. Twrp will open.
Do the normal wipes and flash Jasmine, and boot.
All fixed.
Has anyone used the TWRP Manager app? There is ONE reddit thread claiming success installing on 24B, but I'd like to hear from more people before I try it myself.
I was wondering if I pulled the boot image off of jasmine ROM after i install on 24 b could i essentially just flash the boot image for the stock Rom? To beat the secure Boot error?
There is an autorec here for 24B compliments of @bender_007.
hi every one . i finally installed the cm13 on my lg g2 mini D618 .
i was have a twrp recovery v2710
and accidentally when i login to developer mode on my device i activate the choice of updating cyanogenmod recovery mode
and now instead the twrp recovery . i have a cyanogenmode recovery
so how can i go back to twrp recovery???
You reflash it.
Sent from my LG G2 Mini using XDA Labs
thanks it works
Hello, there are ZIP files to install unofficial TWRP for the LG G8X ThinQ, and they work but I want to know if anyone has got working any unofficial TWRP for the G8X but flashed as a recovery.img instead of using the ZIP files on Magisk.
I'm asking this since I want to know if there is a way to just install TWRP the regular way like any other Phone would if they had an official TWRP build, and there is a bug or something where touchscreen doesn't work if you reboot to recovery without using the Phone buttons.