Related
Get superuser whitelist. I pulled mine off a rooted Galaxy Tab:
Code:
linux$ adb pull /system/app/Superuser.apk
linux$ adb pull /system/bin/su
From a machine with ADB working, and communicating with your Nook:
Install Superuser.apk, and copy the su binary to /data/local:
Code:
linux$ adb install Superuser.apk
linux$ adb push su /data/local/
Shell into the Nook, remount the system partition read/write, and install the su utility to /system/bin:
Code:
linux$ adb shell
# cd /system/bin
# mount -o remount,rw /dev/block/mmcblk0p5 /system
# cat /data/local/su > su
# chmod 6755 su
# ls -l su
-rwsr-sr-x root root 26264 2010-12-01 10:27 su
#
reboot Nook Color to get Superuser to show up in "extras." Now, you can get root from inside the Better Terminal Emulator Pro shell.
Thanks for the info. Just a quick note that on Cyanogenmod 6.1 RC2 (Nexus One), the su binary is actualy at /system/xbin/su rather than /system/bin/su
hharte said:
Get superuser whitelist. I pulled mine off a rooted Galaxy Tab:
Code:
linux$ adb pull /system/app/Superuser.apk
linux$ adb pull /system/bin/su
From a machine with ADB working, and communicating with your Nook:
Install Superuser.apk, and copy the su binary to /data/local:
Code:
linux$ adb install Superuser.apk
linux$ adb push su /data/local/
Shell into the Nook, remount the system partition read/write, and install the su utility to /system/bin:
Code:
linux$ adb shell
# cd /system/bin
# mount -o remount,rw /dev/block/mmcblk0p5 /system
# cat /data/local/su > su
# chmod 6755 su
# ls -l su
-rwsr-sr-x root root 26264 2010-12-01 10:27 su
#
reboot Nook Color to get Superuser to show up in "extras." Now, you can get root from inside the Better Terminal Emulator Pro shell.
Click to expand...
Click to collapse
Thank you, very useful instruction!
Couple of questions though:
1. Any public repo where the working in NC Superuser.apk could be downloaded from? Not everyone out of NC owners owns Galaxy Tab.
2. More elaboration on "whitelist", please
3. If possible, show some example why someone might need this. I'd rather try to edit build.prop: pixel density, whatever, plus changing stock system Droid Sans into, say, much more beautifil Segoe WP. But it's just me though.
Thank you
aludal said:
Thank you, very useful instruction!
Couple of questions though:
1. Any public repo where the working in NC Superuser.apk could be downloaded from? Not everyone out of NC owners owns Galaxy Tab.
2. More elaboration on "whitelist", please
3. If possible, show some example why someone might need this. I'd rather try to edit build.prop: pixel density, whatever, plus changing stock system Droid Sans into, say, much more beautifil Segoe WP. But it's just me though.
Thank you
Click to expand...
Click to collapse
For #3, somebody may want to replace system fonts to support other languages than English. I have done that to Android 2.1 phones too.
aludal said:
Thank you, very useful instruction!
Couple of questions though:
1. Any public repo where the working in NC Superuser.apk could be downloaded from? Not everyone out of NC owners owns Galaxy Tab.
Thank you
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showthread.php?t=665974
hharte said:
Get superuser whitelist. I pulled mine off a rooted Galaxy Tab:
linux$ adb pull /system/bin/su
Click to expand...
Click to collapse
Thanks Man, this was the part i didn't get and it's working now
PTzero said:
Here you go: http://forum.xda-developers.com/showthread.php?t=665974
Click to expand...
Click to collapse
So I installed this version of the Superuser apk but it seems to be an old version (2.0.3) with the ninja icon.
The latest version is 2.3.6.1 but I can't seem to get it to install (INSTALL_FAILED_UPDATE_INCOMPATIBLE).
Which is the latest version of Superuser apk that works with nC that has the 'Android Skull and Crossbones' icon and does anyone have the apk?
califrag said:
So I installed this version of the Superuser apk but it seems to be an old version (2.0.3) with the ninja icon.
The latest version is 2.3.6.1 but I can't seem to get it to install (INSTALL_FAILED_UPDATE_INCOMPATIBLE).
Which is the latest version of Superuser apk that works with nC that has the 'Android Skull and Crossbones' icon and does anyone have the apk?
Click to expand...
Click to collapse
That's odd. I was able to install 2.3.6.1 with no problem. I pulled it the apk off my Nexus One.
dark79 said:
That's odd. I was able to install 2.3.6.1 with no problem. I pulled it the apk off my Nexus One.
Click to expand...
Click to collapse
Could you pull and post your Superuser apk and your /system/bin/su file? I don't have a nexus one and when I tried using the Superuser apk and su file from the cyanogen 6.0 Nexus ROM it didn't seem to work either
EDIT:
Nevermind I got it working using the files attached (latest version 2.3.6.1)
(from here: http://forum.xda-developers.com/showthread.php?t=682828)
I also noticed that it had to grant itself Superuser permissions when I hit the "settings" tab. Under the settings tab I also noticed my 'su' version was 'original' and there was an update available which changed it to version '2.3.1-ef'. Not sure if this needs to be done for it to work right or not but thought I should mention it.
Will this work on just linux or windows?
You can do it on windows using ADB
califrag said:
Could you pull and post your Superuser apk and your /system/bin/su file? I don't have a nexus one and when I tried using the Superuser apk and su file from the cyanogen 6.0 Nexus ROM it didn't seem to work either
EDIT:
Nevermind I got it working using the files attached (latest version 2.3.6.1)
(from here: http://forum.xda-developers.com/showthread.php?t=682828)
I also noticed that it had to grant itself Superuser permissions when I hit the "settings" tab. Under the settings tab I also noticed my 'su' version was 'original' and there was an update available which changed it to version '2.3.1-ef'. Not sure if this needs to be done for it to work right or not but thought I should mention it.
Click to expand...
Click to collapse
What did you do to get this? I tried installing using ADB and Android Commander. I get the same error that says INCOMPATIBLE. This is the only program giving me issues.
sminker said:
What did you do to get this? I tried installing using ADB and Android Commander. I get the same error that says INCOMPATIBLE. This is the only program giving me issues.
Click to expand...
Click to collapse
Make sure to download the 'eclair\froyo' version.
this is the file im using
su-2.3.6.1-ef-signed
i did have it installed once and uninstalled, but now i cant reinstall it
sminker said:
this is the file im using
su-2.3.6.1-ef-signed
i did have it installed once and uninstalled, but now i cant reinstall it
Click to expand...
Click to collapse
use adb shell and go into /data/data and do an 'ls'
remove any directory there that looks like 'com.noshofou'
i was able to use z4root to get it installed
when I do:
cat /data/local/su > su
I get:
Cannot create su: remote access failed
Is there a Windows tutorial for how to install Super User on the NC or an apk that does the same thing?
Is there any advantage to put the binary into xbin versus bin
discourse said:
Is there a Windows tutorial for how to install Super User on the NC or an apk that does the same thing?
Click to expand...
Click to collapse
I would like a windows walkthrough also
Okay so ChainsDD's Superuser doesnt work on Honeycomb. The reason is a (unnecessary?) hack used by the developer to link properly and use the mktemp function.
To fix this, I downloaded the sources and compiled them again, but this time avoiding the _mktemp hack. Build instructions:
Code:
(get latest CM sources)
# cd <path-to-project-directory>
# repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
# repo sync
(do a generic build)
# source ./build/envsetup.sh
# lunch full-eng
# make
(take a break, this takes a long time)
(fix the su binary)
# cd system/extras/su
# vi su.c
(make the fix, just replace _mktemp with mktemp and remove its declaration)
# mm
(the new su binary should be available in out/target/product/generic/system/xbin)
The fixed binary is attached with this post. Just install Superuser from the market or install it after downloading from ChainsDD's thread (link above). Push the fixed su binary and away you go!!
Code:
# adb push su /system/xbin
# adb shell chmod 4755 /system/xbin/su
Let me know how it goes...
Source Code: https://github.com/j4mm3r/android_system_extras
j4mm3r said:
Okay so ChainsDD's Superuser doesnt work on Honeycomb. The reason is a (unnecessary?) hack used by the developer to link properly and use the mktemp function.
To fix this, I downloaded the sources and compiled them again, but this time avoiding the _mktemp hack. Build instructions:
Code:
(get latest CM sources)
# cd <path-to-project-directory>
# repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
# repo sync
(do a generic build)
# source ./build/envsetup.sh
# lunch full-eng
# make
(take a break, this takes a long time)
(fix the su binary)
# cd system/extras/su
# vi su.c
(make the fix, just replace _mktemp with mktemp and remove its declaration)
# mm
(the new su binary should be available in out/target/product/generic/system/xbin)
The fixed binary is attached with this post. Just install Superuser from the market or install it after downloading from ChainsDD's thread (link above). Push the fixed su binary and away you go!!
Code:
# adb push su /system/xbin
# adb shell chmod 4755 /system/xbin/su
Let me know how it goes...
Source Code: https://github.com/j4mm3r/android_system_extras
Click to expand...
Click to collapse
Works great! My Root is up and working! Thank you!
Updated OP in the other thread to direct people here. Method tested and working perfect. Many thanks to j4mm3r.
How do I make it read/write so I can push the new SU over?
Thanks!
Thank you, gentle sir!
chhaggerty said:
Updated OP in the other thread to direct people here. Many thanks to j4mm3r.
Click to expand...
Click to collapse
Usually this works on the HC image
# adb remount
Or the long form:
# adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
18.4009 said:
How do I make it read/write so I can push the new SU over?
Thanks!
Click to expand...
Click to collapse
j4mm3r said:
Thank you, gentle sir!
Usually this works on the HC image
# adb remount
Or the long form:
# adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
Click to expand...
Click to collapse
Thank you, worked like a charm.
Well, I got the SU pushed over and ran the command to set permissions and rebooted but still no root after reboot.
I just got the nook so I am probably do something wrong.
Stuck on root access issue
Many thanks to those who worked on HoneyComb (HC) v4 on eMMC and the rooting solution.
I have root after first flashing to eMMC and checking with terminal. I downloaded and pushed the new SU and still appear to have root -- according to terminal.
The Superuser app opens just fine, but Root Explorer crashes and Rom Manager/CWR complain about not having elevated rights. I *think* I have the latest version of both.
Note: I have only run the two commands above -- and not the list of commands in the OP.
What am I missing here?
Many thanks,
Landlocked
When I type SU in terminal emulator I get an error stating:
"reloc_library[1315]: 1749 cannot locate _mktemp..."
one way to quickly check if you have it working is to do the following:
- Get to a shell:
# adb shell
(this should give you the "[email protected]:/ #" prompt)
- Become un priviledged:
[email protected]:/ # su 1000
[email protected]:/ $
(the "$" indicates that you are no longer root)
- Try to become root again:
[email protected]:/ $ su
This should open up the Superuser dialog asking you to allow or deny superuser request, which means that its working as expected. If you need more help then join on #nookolor on irc.freenode.net (see http://nookdevs.com/IRC for instructions for IRC). I can help you there.
landlocked said:
Many thanks to those who worked on HoneyComb (HC) v4 on eMMC and the rooting solution.
I have root after first flashing to eMMC and checking with terminal. I downloaded and pushed the new SU and still appear to have root -- according to terminal.
The Superuser app opens just fine, but Root Explorer crashes and Rom Manager/CWR complain about not having elevated rights. I *think* I have the latest version of both.
Note: I have only run the two commands above -- and not the list of commands in the OP.
What am I missing here?
Many thanks,
Landlocked
Click to expand...
Click to collapse
Did you replace the "su" binary with the one in the first post?
When I type SU in terminal emulator I get an error stating:
"reloc_library[1315]: 1749 cannot locate _mktemp..."
Click to expand...
Click to collapse
j4mm3r said:
one way to quickly check if you have it working is to do the following:
- Get to a shell:
# adb shell
(this should give you the "[email protected]:/ #" prompt)
- Become un priviledged:
[email protected]:/ # su 1000
[email protected]:/ $
(the "$" indicates that you are no longer root)
- Try to become root again:
[email protected]:/ $ su
This should open up the Superuser dialog asking you to allow or deny superuser request, which means that its working as expected. If you need more help then join on #nookolor on irc.freenode.net (see http://nookdevs.com/IRC for instructions for IRC). I can help you there.
Click to expand...
Click to collapse
I get this error:
Thanks for the info, J4mm3r. I can switch from root to standard user back to root on the NC just fine. None of the programs that are supposed to ask for root are prompting me -- as they do on my Droid 2.
I downloaded the new SU (above) and pushed it over using the sample commands.
I dont think you have replaced the "su" binary with the one that I posted.
18.4009 said:
I get this error:
Click to expand...
Click to collapse
Sorry, for the clutter, but I have appeared to have made some progress. I used the new SU (above) and repeated the steps in this thread:
http://forum.xda-developers.com/showthread.php?t=941445
Rom Manager now properly asks for for SU permission and installed CWR. Root Explorer still crashes, but that may be a file version issue.
j4mm3r said:
I dont think you have replaced the "su" binary with the one that I posted.
Click to expand...
Click to collapse
Strange I pushed you su over to /system/bin and now I have root
This is working perfectly. Thank you so much. All my root apps work properly now.
thanks j4mm3r for the fix
now we just need a fresh hcv5 rooted image to play with.
landlocked said:
Sorry, for the clutter, but I have appeared to have made some progress. I used the new SU (above) and repeated the steps in this thread:
http://forum.xda-developers.com/showthread.php?t=941445
Rom Manager now properly asks for for SU permission and installed CWR. Root Explorer still crashes, but that may be a file version issue.
Click to expand...
Click to collapse
I did the exact same thing, used new SU and completed the steps in the thread above and just installed busybox from titanium bu. Root Explorer is working fine for me.
j4mm3r you are da man! I have a tear in my eye right now, as I am so happy that this got Superuser working. I had lost root and your fix got it back and also now Superuser is asking for permission on everything I have tried thus far (SetCPU, RootExplorer, Root Check, Quick Boot).
The dev support surrounding HC on the NC is nothing short of spectacular. So many thanks go out to so many dang-smart people out there.
THANKS!!
Glad to be of help...
360Razir said:
j4mm3r you are da man! I have a tear in my eye right now, as I am so happy that this got Superuser working. I had lost root and your fix got it back and also now Superuser is asking for permission on everything I have tried thus far (SetCPU, RootExplorer, Root Check, Quick Boot).
The dev support surrounding HC on the NC is nothing short of spectacular. So many thanks go out to so many dang-smart people out there.
THANKS!!
Click to expand...
Click to collapse
Just in case someone is
This page details how to root the Fujitsu Arrows TAB F-01D.
http://arrowstab-f01d.blogspot.com/2012/03/easy-rooting-toolkit-for-arrows-tab-f.html
it works.
Now if only somebody can post the firmware updates..
English instructions
Well, with some help from Google Translate and some creative interpretations, I managed to do this and thought I'd provide some English instructions for others (with some added comments)
DISCLAIMER: AS USUAL, YOU SHOULD KNOW THAT FOLLOWING THESE ACTIONS (AND ESPECIALLY FOLLOWING THEM INCORRECTLY) CAN BRICK YOUR DEVICE (I.E. YOUR DEVICE WILL STOP WORKING, POSSIBLY PERMANENTLY). I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY ARISE FROM YOU FOLLOWING THESE INSTRUCTIONS, YOU DO SO AT YOUR OWN RISK.
Downloads
1. Windows -- the Arrows TAB USB driver Download.
2. Easy rooting toolkit (ERT) for Arrows Tab F-01D (ver 1.0) Download
3. goroh_kun's lsm_disabler.ko Download
Info
4. A su binary, such as the one found in DooMLoRD_v3_ROOT-zergRush-busybox-su.zip
5. Android SDK platform tools. adb(.exe) (and in Windows, specifically: AdbWinApi.dll, AdbWinUsbApi.dll)
Preparation
1. Unzip ert4F01D.zip, and in the subdirectory 'files' place:
* adb.exe (Windows only, from step 4 above)
* AdbWinApi.dll (Windows only, from step 4 above)
* AdbWinUsbApi.dll (Windows only, from step 4 above)
* lsm_disabler.ko (from step 3 above)
* su (from step 5 above)
2. Before connecting the USB, in Settings -> Applications -> Development:
* Check (tick) USB debugging ("Debug mode when USB is connected")
* Check (tick) Stay awake ("Screen will never sleep while charging")
3. Set up the USB drivers and Android Development stuff if you haven't already. I don't use Windows so can't help with this.
The Dirty Work
At this stage, you can run the batch file. Since I don't use Windows, I did the steps by hand, so you'll have to correlate your actions appropriately (I can't read Japanese either, so your guess is as good as mine ).
1. On your PC:
adb shell "mv /data/local/calib.dat /data/local/calib.dat_"
adb shell "ln -s /data/local.prop /data/local/calib.dat"
2. On the tablet, go into Google Maps, touch the GPS icon ("locate me" icon) on the top right hand corner, and then touch the BACK key to exit.
3. On your PC:
adb shell "echo ro.kernel.qemu=1 > /data/local.prop"
adb shell "rm /data/local/calib.dat"
adb shell "mv /data/local/calib.dat_ /data/local/calib.dat"
adb reboot
5. Once the device has fully rebooted, on your PC:
adb shell "mkdir /data/local/lib"
adb push files\lsm_disabler.ko /data/local/lib/
adb shell "insmod /data/local/lib/lsm_disabler.ko"
adb shell "mkdir /data/local/bin"
adb shell "echo '#!/system/bin/sh' > /data/local/bin/autoexec.sh"
adb shell "echo '/system/xbin/soff' >> /data/local/bin/autoexec.sh"
adb shell "chmod 755 /data/local/bin/autoexec.sh"
adb shell "mount -o rw,remount /system /system"
adb shell "ln -s /data/local/bin/autoexec.sh /system/etc/install-recovery.sh"
adb push files\su /system/xbin/
adb shell "chown root.root /system/xbin/su"
adb shell "chmod 06755 /system/xbin/su"
adb shell "echo insmod /data/local/lib/lsm_disabler.ko > /system/xbin/soff"
adb shell "chmod 755 /system/xbin/soff"
adb shell "mount -o ro,remount /system /system"
adb shell "echo > /data/local.prop"
6. I think at this point I was just meant to exit the lock screen.
7. adb reboot
8. Congratulations. You're now rooted. Go to the Play Store and download "Superuser" (by ChainsDD) and "BusyBox" (by Stericson). If you decide to buy BusyBox Pro, do not check the "symlinks" option in version 8.0, otherwise it's game over (no wifi, no adb shell, no root, no remount). It's a pain, but not impossible to repair this situation, see http://forum.xda-developers.com/showthread.php?p=26964465. I've emailed the author and I hope future versions won't trash the system so easily.
After all this, I'd suggest download Titanium Backup for Root users, backing everything up, and uninstall the all the bloatware that came with the device. Read up elsewhere about Titanium Backup.
Let me know if this helped you! Not sure how many other English speakers are using this device
Thank you for this wonderful post! A few questions:
1.) I use the F-01D but I don't live in Japan. One of the gripes I've been having about this tablet is that there doesn't seem to be anyway for me to get firmware updates unless I go there. Once rooted am I able to use Market Enabler to fake a carrier and update my tablet?
2.) This is slightly off on a tangent but since I can't find much English material about this tablet anway I might as well ask here. Another one of my gripes about the tablet is it doesn't seem to handle video very well. even 720p video doesn't play smoothly on it. On most of the software I download, it seems hardware acceleration is not enabled? Is this a hardware issue, or is it blocked by the software. And if the latter would rooting the tablet help resolve this issue; or is there any other solution? From what I've read the OMAP processor in this thing should easily be able to handle 1080p video right?
Many thanks! :good:
Kinslayer81 said:
Well, with some help from Google Translate and some creative interpretations, I managed to do this and thought I'd provide some English instructions for others (with some added comments)
DISCLAIMER: AS USUAL, YOU SHOULD KNOW THAT FOLLOWING THESE ACTIONS (AND ESPECIALLY FOLLOWING THEM INCORRECTLY) CAN BRICK YOUR DEVICE (I.E. YOUR DEVICE WILL STOP WORKING, POSSIBLY PERMANENTLY). I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY ARISE FROM YOU FOLLOWING THESE INSTRUCTIONS, YOU DO SO AT YOUR OWN RISK.
Downloads
1. Windows -- the Arrows TAB USB driver Download.
2. Easy rooting toolkit (ERT) for Arrows Tab F-01D (ver 1.0) Download
3. goroh_kun's lsm_disabler.ko Download
Info
4. A su binary, such as the one found in DooMLoRD_v3_ROOT-zergRush-busybox-su.zip
5. Android SDK platform tools. adb(.exe) (and in Windows, specifically: AdbWinApi.dll, AdbWinUsbApi.dll)
Preparation
1. Unzip ert4F01D.zip, and in the subdirectory 'files' place:
* adb.exe (Windows only, from step 4 above)
* AdbWinApi.dll (Windows only, from step 4 above)
* AdbWinUsbApi.dll (Windows only, from step 4 above)
* lsm_disabler.ko (from step 3 above)
* su (from step 5 above)
2. Before connecting the USB, in Settings -> Applications -> Development:
* Check (tick) USB debugging ("Debug mode when USB is connected")
* Check (tick) Stay awake ("Screen will never sleep while charging")
3. Set up the USB drivers and Android Development stuff if you haven't already. I don't use Windows so can't help with this.
The Dirty Work
At this stage, you can run the batch file. Since I don't use Windows, I did the steps by hand, so you'll have to correlate your actions appropriately (I can't read Japanese either, so your guess is as good as mine ).
1. On your PC:
adb shell "mv /data/local/calib.dat /data/local/calib.dat_"
adb shell "ln -s /data/local.prop /data/local/calib.dat"
2. On the tablet, go into Google Maps, touch the GPS icon ("locate me" icon) on the top right hand corner, and then touch the BACK key to exit.
3. On your PC:
adb shell "echo ro.kernel.qemu=1 > /data/local.prop"
adb shell "rm /data/local/calib.dat"
adb shell "mv /data/local/calib.dat_ /data/local/calib.dat"
adb reboot
5. Once the device has fully rebooted, on your PC:
adb shell "mkdir /data/local/lib"
adb push files\lsm_disabler.ko /data/local/lib/
adb shell "insmod /data/local/lib/lsm_disabler.ko"
adb shell "mkdir /data/local/bin"
adb shell "echo '#!/system/bin/sh' > /data/local/bin/autoexec.sh"
adb shell "echo '/system/xbin/soff' >> /data/local/bin/autoexec.sh"
adb shell "chmod 755 /data/local/bin/autoexec.sh"
adb shell "mount -o rw,remount /system /system"
adb shell "ln -s /data/local/bin/autoexec.sh /system/etc/install-recovery.sh"
adb push files\su /system/xbin/
adb shell "chown root.root /system/xbin/su"
adb shell "chmod 06755 /system/xbin/su"
adb shell "echo insmod /data/local/lib/lsm_disabler.ko > /system/xbin/soff"
adb shell "chmod 755 /system/xbin/soff"
adb shell "mount -o ro,remount /system /system"
adb shell "echo > /data/local.prop"
6. I think at this point I was just meant to exit the lock screen.
7. adb reboot
8. Congratulations. You're now rooted. Go to the Play Store and download "Superuser" (by ChainsDD) and "BusyBox" (by Stericson). If you decide to buy BusyBox Pro, do not check the "symlinks" option in version 8.0, otherwise it's game over (no wifi, no adb shell, no root, no remount). It's a pain, but not impossible to repair this situation, see http://forum.xda-developers.com/showthread.php?p=26964465. I've emailed the author and I hope future versions won't trash the system so easily.
After all this, I'd suggest download Titanium Backup for Root users, backing everything up, and uninstall the all the bloatware that came with the device. Read up elsewhere about Titanium Backup.
Let me know if this helped you! Not sure how many other English speakers are using this device
Click to expand...
Click to collapse
Just wanted to say thank you again. The rooting worked perfectly, though it took me a while to manually type in all the commands. For people who want to try this, you do need to install busybox before any other programs such as rootchecker will properly verify that your device is actually rooted.
And just for anyone wondering - rooting and using MarketEnabler has NOT been able to resolve the issue of not being able to update the software overseas...
Hey, sorry for the late reply, busy times :>
Glad the post helped you! I know I was super amped to finally get rood and get rid of all the bloatware I couldn't even understand. Things have definitely been a lot smoother since then (but far from perfect, also dying for an ICS upgrade). As for your questions:
simzhewei said:
1.) I use the F-01D but I don't live in Japan. One of the gripes I've been having about this tablet is that there doesn't seem to be anyway for me to get firmware updates unless I go there. Once rooted am I able to use Market Enabler to fake a carrier and update my tablet?
Click to expand...
Click to collapse
From playing around, the requirements seem to imply that you *have to* upgrade via cellular data from a Docomo SIM card, and it can't be done via roaming, so yeah, it seems like you have to physically go to Japan to upgrade Your market enabler idea was a good one, but since you tried that (I'm assuming using the Docomo info), I guess the upgrade app is using a different source to check where you're at. Ultimately we need to somehow get hold of an update.zip (or other file) that can be run through the Recovery system (which does exist!).
2.) This is slightly off on a tangent but since I can't find much English material about this tablet anway I might as well ask here. Another one of my gripes about the tablet is it doesn't seem to handle video very well. even 720p video doesn't play smoothly on it. On most of the software I download, it seems hardware acceleration is not enabled? Is this a hardware issue, or is it blocked by the software. And if the latter would rooting the tablet help resolve this issue; or is there any other solution? From what I've read the OMAP processor in this thing should easily be able to handle 1080p video right?
Click to expand...
Click to collapse
Haven't tried 1080p, but after some tinkering I did get 720p playing. I use MX Player, and although they said it would download needed hardware decoders automatically, it didn't, and things improved a lot after I downloaded the MX Player ARMv7 codec. Video plays great, but to get sound, I had to run the sound through the software decoder (just tap the music note icon, and choose "Track #1 (S/W decoder)".
On the other hand, I found the hardware decoding often gets stuck (relaunching MX player just gives you a waiting indicator forever)... and the only way to fix it is a reboot. Since this happens quite often, it's incredibly annoying, and I'm hoping an upgrade will fix it. Let me know if this doesn't happen to you. Also have some very intermittent wifi issues, some things work fine (speedtest, etc) but apps like streaming radio, some work fine (spotify) and others don't work at all (di radio). Some things work fine for a while after a reboot.
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
Incidentally, here's what happens if I try update via recovery (with no update files). Maybe it will help someone. Googling most of the stuff came up with nothing. The ** in the middle somewhere is stuff I couldn't read, guess I should go back and do it again but this is from quite a while ago.
Code:
C_L1_043
2.6.35.7
V19R36D
=======================
SD Downloader
=======================
Device SW Downloading...
Don't remove
the SD Card & the Battery.
checking battery
eMMC SD mount complete.
microSD mount complete.
Firm name :
Firm name :
Target:
Check eMMC(SD).
Firm name :
Update GANG file not found
File open error!
**ddl Touch Firm Write start
Firm name :
/external_sd/I2C_HSSP_Bridge_Parallel.cyacd file not found
firm name :
/sdcard/I2C_HSSP_Bridge_Parallel.cyacd file not found
#sddl touch firm not found ret: 1
SKIP sddl launch firm write end ret: 1
SD : SdFgldfirmwrite -------
firm name :
BAC_H_19.enc =
firm name :
BAC_H_1.9.enc =
error
SKIP sddl fgic firm write end ret: 1
end
****************************
****************************
****
All firmware not found!
****
Interesting situation...
First off...Kinslayer81, thanks for posting this. I found the original in Japanese, and was not eager to try to translate it. Thanks for putting in the work.
For everyone (especially if you got this to work) - when I went through the step, I keep getting a "permissions denied" message. Whether it's the ERT4F01D batch file, or typing the commands in... I get "permissions denied".
Did you guys encounter this?
Glad it helped you On which step are you getting the error? Any strange output on any of the preceding steps?
Every step is important, to be done in the exact same order, e.g. loading google maps and pressing the 'my location' icon, etc.
Dakedo_Baby said:
First off...Kinslayer81, thanks for posting this. I found the original in Japanese, and was not eager to try to translate it. Thanks for putting in the work.
For everyone (especially if you got this to work) - when I went through the step, I keep getting a "permissions denied" message. Whether it's the ERT4F01D batch file, or typing the commands in... I get "permissions denied".
Did you guys encounter this?
Click to expand...
Click to collapse
Permission denied
Oh I know... I'm not new to the game. I've stalked these boards for a while now... This is my first tablet though.
I've tried running both the ERT4F01D batch... and the manual input.
I get it from the batch file, as soon as I tell it to "RUN"... "Permissions Denied"
From manual input - LINE 2: adb shell "ln -s /data/local.prop /data/local/calib.dat" = "Permissions Denied"
Like there's some additional admin privilege I don't have. Hmmmmm....
And here's an additional kicker... the tablet auto-reboots each and every time. I've tried it a number of times (started over from the top), same result each time.
Kinslayer81 said:
Glad it helped you On which step are you getting the error? Any strange output on any of the preceding steps?
Every step is important, to be done in the exact same order, e.g. loading google maps and pressing the 'my location' icon, etc.
Click to expand...
Click to collapse
I must admit, I don't have any great ideas.
So you can move the file in the first step no problem, and just the attempt to symlink gives you the error?
What is the output of "adb shell ls -la /data/local/".
When does the auto reboot occur?
Dakedo_Baby said:
Oh I know... I'm not new to the game. I've stalked these boards for a while now... This is my first tablet though.
I've tried running both the ERT4F01D batch... and the manual input.
I get it from the batch file, as soon as I tell it to "RUN"... "Permissions Denied"
From manual input - LINE 2: adb shell "ln -s /data/local.prop /data/local/calib.dat" = "Permissions Denied"
Like there's some additional admin privilege I don't have. Hmmmmm....
And here's an additional kicker... the tablet auto-reboots each and every time. I've tried it a number of times (started over from the top), same result each time.
Click to expand...
Click to collapse
I'm stumped too...
Well... this is getting a little interesting...
LS command - no problem (included image)
Decided to have another shot at it... and I was able to get a little further. Still encountered a problem
Now, the INSMOD command failed... "Operation not permitted"
Kinslayer81 said:
I must admit, I don't have any great ideas.
So you can move the file in the first step no problem, and just the attempt to symlink gives you the error?
What is the output of "adb shell ls -la /data/local/".
When does the auto reboot occur?
Click to expand...
Click to collapse
file system set to READ-only...
My file systems are set to Read-only... that explains quite a bit....
Dakedo_Baby said:
Well... this is getting a little interesting...
LS command - no problem (included image)
Decided to have another shot at it... and I was able to get a little further. Still encountered a problem
Now, the INSMOD command failed... "Operation not permitted"
Click to expand...
Click to collapse
Dakedo_Baby said:
My file systems are set to Read-only... that explains quite a bit....
Click to expand...
Click to collapse
Do you mind me asking, how did you set your file system to read-write? I have the same error as you were seeing but it's not allowing me to remount as read-write...
Can you confirm what command you used please?
thanks
Sorry again for late reply
Dakedo_Baby, I've looked at your stuff a few times and it's not obvious to me where things are going wrong. I again need some more info to try get a better idea of what's going on:
1) Before the first reboot, let me know the output of: adb shell "cat /data/local.prop"
2) After the reboot, let me know the output of: adb shell id
As for the file systems, well, /data should be already mounted rw, and /system should be mounted ro until you remount it. You can see how each is mounted with just "adb mount".
histrix said:
Do you mind me asking, how did you set your file system to read-write? I have the same error as you were seeing but it's not allowing me to remount as read-write...
Can you confirm what command you used please?
thanks
Click to expand...
Click to collapse
The command to remount the /system partition as read-write is: adb shell "mount -o rw,remount /system /system"
Of course, you should only be executing that step as part of the given sequence and in the correct order. You won't be able to execute the command until after your first reboot in the instructions, after which adb should still be running as root.
Any good Custom ICS roms you guys recommend after rooting the Arrows Tab?
ICS..Hurray!!!
Just found this out in Fujitsu site:
http://spf.fmworld.net/fujitsu/c/update/nttdocomo/f-01d/update1/top/index.html
There is a 4.0.3 download available. Click the 3rd Button (Green) downloads the zip package.
The 2nd link has howto from PC.
Still not sure if this will work, but trying out.
Also may lose root..and whatever else..So keeping my fingers crossed.
Google translation link
http://translate.google.com/transla...update/nttdocomo/f-01d/update1/top/index.html
Will post how it goes.
I made a new thread for this, since it's a different topic and you'll lose root too
http://forum.xda-developers.com/showthread.php?p=32200671
insmod lsm-disabler.so to remount /system rw
Back to the original topic... what I maybe didn't notice before is that the stock kernel blocks even root users from remounting /system as rw. So in case you ever need rw access to /system again, obviously you'll first have to be root, and afterwards you'll need to "insmod lsm-disabler.so" (as per the original instructions) before you can "busybox mount -o remount,rw /system" (or run any root app that remounts the system partition).
locked F-01d
Kinslayer81 said:
Well, with some help from Google Translate and some creative interpretations, I managed to do this and thought I'd provide some English instructions for others (with some added comments)
DISCLAIMER: AS USUAL, YOU SHOULD KNOW THAT FOLLOWING THESE ACTIONS (AND ESPECIALLY FOLLOWING THEM INCORRECTLY) CAN BRICK YOUR DEVICE (I.E. YOUR DEVICE WILL STOP WORKING, POSSIBLY PERMANENTLY). I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY ARISE FROM YOU FOLLOWING THESE INSTRUCTIONS, YOU DO SO AT YOUR OWN RISK.
Downloads
1. Windows -- the Arrows TAB USB driver Download.
2. Easy rooting toolkit (ERT) for Arrows Tab F-01D (ver 1.0) Download
3. goroh_kun's lsm_disabler.ko Download
Info
4. A su binary, such as the one found in DooMLoRD_v3_ROOT-zergRush-busybox-su.zip
5. Android SDK platform tools. adb(.exe) (and in Windows, specifically: AdbWinApi.dll, AdbWinUsbApi.dll)
Preparation
1. Unzip ert4F01D.zip, and in the subdirectory 'files' place:
* adb.exe (Windows only, from step 4 above)
* AdbWinApi.dll (Windows only, from step 4 above)
* AdbWinUsbApi.dll (Windows only, from step 4 above)
* lsm_disabler.ko (from step 3 above)
* su (from step 5 above)
2. Before connecting the USB, in Settings -> Applications -> Development:
* Check (tick) USB debugging ("Debug mode when USB is connected")
* Check (tick) Stay awake ("Screen will never sleep while charging")
3. Set up the USB drivers and Android Development stuff if you haven't already. I don't use Windows so can't help with this.
The Dirty Work
At this stage, you can run the batch file. Since I don't use Windows, I did the steps by hand, so you'll have to correlate your actions appropriately (I can't read Japanese either, so your guess is as good as mine ).
1. On your PC:
adb shell "mv /data/local/calib.dat /data/local/calib.dat_"
adb shell "ln -s /data/local.prop /data/local/calib.dat"
2. On the tablet, go into Google Maps, touch the GPS icon ("locate me" icon) on the top right hand corner, and then touch the BACK key to exit.
3. On your PC:
adb shell "echo ro.kernel.qemu=1 > /data/local.prop"
adb shell "rm /data/local/calib.dat"
adb shell "mv /data/local/calib.dat_ /data/local/calib.dat"
adb reboot
5. Once the device has fully rebooted, on your PC:
adb shell "mkdir /data/local/lib"
adb push files\lsm_disabler.ko /data/local/lib/
adb shell "insmod /data/local/lib/lsm_disabler.ko"
adb shell "mkdir /data/local/bin"
adb shell "echo '#!/system/bin/sh' > /data/local/bin/autoexec.sh"
adb shell "echo '/system/xbin/soff' >> /data/local/bin/autoexec.sh"
adb shell "chmod 755 /data/local/bin/autoexec.sh"
adb shell "mount -o rw,remount /system /system"
adb shell "ln -s /data/local/bin/autoexec.sh /system/etc/install-recovery.sh"
adb push files\su /system/xbin/
adb shell "chown root.root /system/xbin/su"
adb shell "chmod 06755 /system/xbin/su"
adb shell "echo insmod /data/local/lib/lsm_disabler.ko > /system/xbin/soff"
adb shell "chmod 755 /system/xbin/soff"
adb shell "mount -o ro,remount /system /system"
adb shell "echo > /data/local.prop"
6. I think at this point I was just meant to exit the lock screen.
7. adb reboot
8. Congratulations. You're now rooted. Go to the Play Store and download "Superuser" (by ChainsDD) and "BusyBox" (by Stericson). If you decide to buy BusyBox Pro, do not check the "symlinks" option in version 8.0, otherwise it's game over (no wifi, no adb shell, no root, no remount). It's a pain, but not impossible to repair this situation, see http://forum.xda-developers.com/showthread.php?p=26964465. I've emailed the author and I hope future versions won't trash the system so easily.
After all this, I'd suggest download Titanium Backup for Root users, backing everything up, and uninstall the all the bloatware that came with the device. Read up elsewhere about Titanium Backup.
Let me know if this helped you! Not sure how many other English speakers are using this device
Click to expand...
Click to collapse
thanks for the rooting tutorial but mine is also locked to ntt DOCOMO,,,ANY WAY TO UNLOCK IT
how to unlock the network
please help me how to unlock this tablet i got this tablet from my japan friend but it is network locked please help me to unlock this
Hi guys
I've imported the SH-06D from Japan and the phone is running great, however I'd like to remove some system apps etc to help speed up the phone (it's still on 2.3.5) and obviously tweak it as well.
I know there is an existing thread on the SH-01D (predecessor to the SH-06D) but I'm wondering if anyone has successfully rooted the SH-06D and if so, is there an (easy) process to do this?
Another reason I want to root, is to install the UI from the upcoming Evangelion Nerv edition of the SH-06D that is due to be released in a few days.
ICS for the SH-06D is just around the corner (due to be released in July) but I'd realy appreciate any help, assistance or tips in rooting the phone as it is now.
Cheers! :fingers-crossed:
Anyone?
:-(
here is a link to root the sh-06d :
http://itsuki.ddo.jp/gadget/index.php?SH-06D
THANK YOU!
Have you tried this method and does it work? Can you assist me in following those directions?
Cheers
interfreak said:
THANK YOU!
Have you tried this method and does it work? Can you assist me in following those directions?
Cheers
Click to expand...
Click to collapse
i haven't tried since i don't have this phone.
i can try to help you if you want.
testnumero said:
i haven't tried since i don't have this phone.
i can try to help you if you want.
Click to expand...
Click to collapse
Thanks mate!
I'm fumbling through the process now - it's a little hard when you are using google translate lol!
OK, I've run through all the steps but..
When I get to the end of the process:
C:\Users\interfreak\Desktop
$ su
su
su: permission denied
:-(
interfreak said:
OK, I've run through all the steps but..
When I get to the end of the process:
C:\Users\interfreak\Desktop
$ su
su
su: permission denied
:-(
Click to expand...
Click to collapse
i don't know what is the problem, try to do steps again.
Tried, same result. :-(
interfreak said:
Tried, same result. :-(
Click to expand...
Click to collapse
i'll ask to translate it
Thanks mate!!! :highfive:
I want to know untill now has SH-06D been rooted?
I wish someone could dump ROM or launcher from SH-06 NERV version:fingers-crossed:
I'm working on the translation for root on Sharp Aquos SH-06D.
Please give me one or two more days!
That is highly impossible, having full root in J Phone are hard enough. Unlocking the bootloader is a wet dream for almost everyone who likes J phone
lightout said:
I want to know untill now has SH-06D been rooted?
I wish someone could dump ROM or launcher from SH-06 NERV version:fingers-crossed:
Click to expand...
Click to collapse
I'm trying to hard reset my SH-06D, but I can't do it via settings-privacy. I can select to wipe, but nothing happens.
Any suggestions?
I got the Nerv edition
Hey man, how did the rooting go? I ordered the Nerv edition of this phone, and I want to root it (mainly to pair my sixaxis controller for psx emulation) but wanted to consult with you first as a precaution.
Here is the a rough translation of the root guide found here:
http://itsuki.ddo.jp/gadget/index.php?SH-06D
Big thanks to testnumero for the help!
Please don't ask me directly for help. I don't own this phone.
A quick look at root
• With root you can freeze preinstalled bloatware and backup application settings and game save data.
• 3D content from /system can be played on other devices and 3DTVs.
Unresponsive apps can be frozen which will help the device run smoother and have a longer battery life.
Applications which are frozen disappear from your drawer making the device look cleaner and keeping your mind at ease.
• The process is similar to the one used for SH-01D.
• If an update patch is released or the Android 4.0 summer update is released then this guide will no longer be of help.
(Make sure your device is the following: Android Ver. 2.3.5 Build No. 01.00.03)
• If your device becomes a paperweight I won’t be held responsible.
• Follow this guide at your own risk.
↑
Preparations – Before you begin
• Install Android SDK and SHARP ADB USB drivers and make to use ADB.
• 「Settings」→「Applications」→「Development」→「USB Debugging」 checked.
• SH-06D and micro USB cable to connect to your PC
↑
Required Files
• Download "shdisphook" from the following link and extract.
http://goo.gl/Bs6Iq
• Download shsdgetroot-omap4.zip from the following link and extract.
http://www1.axfc.net/uploader/File/so/78144
• Download shbootgetroot-su.lzh from the following link and extract.
http://www.mediafire.com/?6i0n32jlwbxe8cp
• Keep all extracted files in the same folder.
↑
Creating files
• Create a file named "shdisphook.bat" in the folder with the extracted files.
Copy and paste the following and save.
adb push onload.sh /data/local/
adb push libsdservice_jni.so /data/local/
adb push shdisphook /data/local/
adb shell chmod 755 /data/local/onload.sh
adb shell chmod 755 /data/local/shdisphook
adb reboot
adb wait-for-device shell /data/local/shdisphook
pause
• Create a file named "oncmd.sh" and put the following in the description.
(Save the line break as LF)
chmod 777 /cache
chmod 666 /cache/recovery
• Replace the contents of the file "installfile.cmd" with the following and save.
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/mount -o rw,remount -t rootfs rootfs /"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 777 /sbin"
adb push su /sbin
adb push busybox /sbin
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chown 0.0 /sbin/su"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chown 0.0 /sbin/busybox"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 6755 /sbin/su"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 755 /sbin/busybox"
adb shell /data/local/shsdgetroot-omap4 -c "/sbin/busybox --install -s /sbin"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 755 /sbin"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/mount -o ro,remount -t rootfs rootfs /"
adb push Superuser.apk /data/local/
adb shell /system/bin/pm install -t -f -r /data/local/Superuser.apk
adb shell /system/bin/rm /data/local/Superuser.apk
exit /b
↑
Step 1
• Open command prompt to the folder with the extracted files and navigate to "shdisphook".
Execute "shdisphook.bat". (You can also just double click on the .bat file)
• The device will reboot so just wait for the [Press any key to continue] message to appear.
If more than a few minutes have passed and nothing has appeared then, force close and execute "shdisphook.bat" again.
(When you fail your PC will reboot or your SH-06D WiFi will start. There is a high rate of success when you immediately unlock the lock screen for your device when it goes to sleep.)
↑
Step 2
• Open command prompt and send oncmd.sh to SH-06D to change permissions
adb push oncmd.sh /data/local/oncmd.sh
adb shell chmod 755 /data/local/oncmd.sh
• 「Settings」→「microSD and device storage」→「Unmount microSD」 This will execute the file "oncmd.sh" , which was sent to the device earlier.
(Cancel the message for 「Unmount microSD」)
• Enter the following commands.
adb shell mv /cache/recovery /cache/recovery_
adb shell ln -s /dev/shsd /cache/recovery
• Execute the following adb shell ls -l /cache and if you see the following message you have succeed.
drwxrwx--- root root 2011-11-11 03:39 lost+found
drw-rw-rw- system cache 2012-01-24 10:48 recovery_
lrwxrwxrwx shell shell 2012-03-02 13:24 recovery -> /dev/shsd
• Next execute adb shell ls -l /dev/shsd you should get the following message if you were successful.
crw-rw-rw- system cache 231, 0 2012-04-23 02:01 shsd
↑
Step 3
• Execute adb push shsdgetroot-omap4 /data/local
• Execute adb shell /system/bin/chmod 755 /data/local/shsdgetroot-omap4
• Execute adb shell /data/local/shsdgetroot-omap4 -v -m -u
• The “# “mark will appear there will be no response. Close command prompt for now.
• Execute installfile.cmd
• Check if you have root with the following adb shell→su
↑
After you reboot
• After you reboot you will lose root rights so execute shdisphook.bat→Cancel Unmount microSD →execute installfile.cmd and you should have root again.
The reason why you cannot do a clean wipe or nothing happen is because the recovery section has been move out into another location, causing it to not loading the recovery correctly.
Check with SH-01d part, I have asked similar question there and I revert the recovery in order to wipe the phone..
You need to rearrange the following section like on the sh-01d when you hit this part:
(Following is Original command that you relocated the recovery for root)
adb shell mv /cache/recovery /cache/recovery_
adb shell ln -s /dev/shsd /cache/recovery
And replace with the revert command found on sh-01d thread. You will need to redo all the steps from step 1 to step 2 and STOP AFTER YOU REVERT the RECOVERY.
You should be able to do a full wipe with no issue then. DO NOT POWER DOWN or RESET!!! You will have to REDO it again as it REQUIRES SHDSIHOOK to input shell command.
Hope it helps
waiting！！！！！！！！！！
Hello everyone,
I've updated my firmware to the latest version of my huawei ascend p7 making it impossible to root my phone. Now what I'm trying to do is get the non-rooted busybox working and replace the old links of commands with the ones in busybox. I'm using the following commands to do that:
First I export the path and such using:
Code:
export PATH=$PATH:/data/data/burrows.apps.busybox/app_busybox;
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/data/data/burrows.apps.busybox/app_bussybox
Now I'm able to use busybox in my terminal (only for that session, when I exit the terminal and restart it I would have to re-do the export path thing).
So... I wanted to replace all the links to those of busybox using the following command:
Code:
for c in `busybox --list`; do busybox ln -s busybox $c; done
This however outputs for each command for example cat:
Code:
ln: cat: Read-only file system
I've read somewhere that you can remount your system partition in order to make it writeable? Is this the way to do it? And if so what commands should I run? I have access through adb and a normal shell on the phone. Remember: it's non-rooted...
EDIT: seems like I can't remount /system without root priviledges...
Also I would like to be able to have a full colored bash shell with a bashrc (in which I can add the path to busybox aswell) if that's possible.
I'm using jackpal's android terminal emulator.
EDIT: I think I might've posted this on the wrong forum, if anyone is so kind as to move this to this forum: http://forum.xda-developers.com/ascend-p7/help I would greatly appreciate it. Altho I think this might be a general question rather then a model specific question.