Related
So when I first received the new Seidio Convert Case, I was pretty excited. I thought it couldnt get any better then the Active case Seidio makes but I was wrong, dead wrong. The Convert case is practically two cases in one. It’s a Seidio Surface, with an add on silicone inlay that goes over that, and then an exoskeleton that goes over that. O and if that isn’t enough, you’re getting a waist clip, which your phone goes into for easy access, and a Seidio Screen Guard. Providing the maximum in protection, this case makes the Otterbox weep in shame. I used the case as a the Surface case first for a day, and it is great, its light weight, easily removed and provides just the right amount of protection for the light weight and little size it adds to your phone.
The silicone overlay, covers all the ports to the phone, headphone jack, speakerphone, and volume rocker. The only access that is open to the elements is the screen and camera toggle switch. Even the back cameras are protected by a silicone cover, that covers the cameras while not using and while in use, can be clipped into the case, keeping it from moving around. Now I know most people have problems accessing the ports, while the are covered, but these port covers have little grips on the outside so you can easily pull them up from covering the ports themselves, this makes access extremely easy and quick. Now my biggest gripe with the Otterbox is that the covers for the ports always ripped or tore off within the first week, but with Seidios silicone there is no sign of ripping or tearing in sight, which is a major plus! This only confirms in my mind the quality of Seidio’s products.
The waist clip/holster is another bonus, once the phone is clipped into the holster, you can lock it in, so no matter what you cant unlock it, providing you with the comfort that the phone isn’t going to pop out, like so many of my phones have down before. This clip, on top of the surface, silicone and convert skeleton makes this case the most rugged and provides the most protection, the best of both worlds.
The screen guard on the phone, which no matter what, I always buy for my phones, is amazing as well. Clear and smooth as glass. Covers the whole screen including the four home buttons on the bottom, which the Sprint OEM guards don’t do. I really like how the screen guard covers the whole screen, because unlike most cases, the whole screen is open for use, none of it is covered from the case itself.
Since using this case, I have dropped my phone twice and unlike other people’s reviews on the Convert case for other phones, the exoskeleton is still in tack with no sign of abuse. My phone is completely scratch free, like I expected it to be.
However, after that, I used it as the Convert, and have been for the past week, and I will never use another case. Although, the only two down sides that I have with this case is that it adds a little bit of size and weight to the phone. But for the amount of protection you’re getting in return, it’s a fair and well worth trade. The second downside, which isn’t even that big, but, should be noted is that the silicone inlay does attract a little bit of lent, while in the pocket. besides that, I really see no downside to this case.
I would have to say after using this case; I would give it a 9.9/10. And would highly recommend it to anyone I know!
MORE PICS:
MORE PICS:
How much was this case ?
This case is retailing for $69.99 with the holster, without the holster it costs $49.99. For the protection your giving your phone its totally worth it.
Isn't this case similar to the platinum series case from bestbuy ?
Matty Mo said:
This case is retailing for $69.99 with the holster, without the holster it costs $49.99. For the protection your giving your phone its totally worth it.
Click to expand...
Click to collapse
Just an FYI, it is $49.99 for the case with a holster for the convert case, the $69.99 is if you want a holster for the smaller case too.
DarkManX4lf said:
Isn't this case similar to the platinum series case from bestbuy ?
Click to expand...
Click to collapse
It's the same thing. I bought mine at BB but it didn't come with a screen protector which was fine with me since I'm a fan of InvisiShield. I wish that it did come with a holster for the surface case though.
Good review!
That case is worth every penny.
Best prices I've seen
This is for the convert combo like the review above:
http://www.amazon.com/Seidio-BD4-HK...9LR0/ref=sr_1_1?ie=UTF8&qid=1311006177&sr=8-1
and this is for the convert combo value pack:
http://www.amazon.com/Seidio-BD5-HK...9LPC/ref=sr_1_1?ie=UTF8&qid=1311006177&sr=8-1
What makes the value pack different is that it comes with an extra surface holster so if you wanted to, you can rock the covert/holster for max protection or roll with the surface/holster for less bulk. Depending on what protection or mood you are in for the day.
For a couple of bucks more I went with the value pack. Oh and this bundle also includes 1 screen protector.
btw, nice review.
Ok, I finally got my Otterbox Defender today. First impression is that it isn't exactly the way I thought it would be. I am not sure exactly what I was expecting but I know it wasn't quite what I got.
Pro: plastic shell feels pretty solid around phone and I really like the way the solid clear protector covers the whole screen it makes me feel a lot less worried about messing up my phone. The silicon/rubber outer sleeve holds the two halves of the hard shell together and gives a good grip. There is no way for it to fall out of the holster.
Con: my biggest complaint would be the silicone/rubber outer sleeve feels a bit sloppy. I would have expected it to be tighter, more exactly form fitting. The outer sleeve also picks up every piece of lint that comes it's way and because it is a black case white pocket lint shows very well. It is very difficult/awkward to remove from the holster, that may get better over time as out gets worn in a bit.
Conclusion: pretty good case that should do it's job but over priced at this time, at $10 it would be a deal, at $15 it would still be a good value, at $20 it's something I would consider and at the $30 I paid after shipping and handling well I feel like I over paid but I don't feel like I was robbed. I will be keeping it.....for a while at least.
***EDIT***
Ok after playing with it, the fact that the soft outer case is not super tight is not as annoying as the lint sticking to the outside of it.
Sent from my MB855 using XDA App
I have one and have to say the biggest issue is the bulk.
It pops into and out of the holster so simply it's disgusting....dunno why you had problems there ?
If you spend a few moments and make ABSOLUTELY CERTAIN that the soft rubber/silicone outer shell is on properly it is not loose in the slightest. It is in fact quite snug. It's a bit trying to get it on perfect, but it's time well spent..
My complaint about it is when you use the holster as a vertical stand and have the phone facing outwards with the charger cable plugged in...the little flap that covers the charge port is not quite in the correct spot (you'd have to try it and see it for yourself, very difficult to explain).
The holster snap/clasp thing is in the way of that formentioned flap.
Not a deal breaker....I will be keeping the otterpop.
editater>
BTW, it's a holster made to go on your belt or the waist of your trousers....why are you concerned with lint sticking to it when it should never see any lint if used in the fashion it's intended for ?
Well after a little time I figured out why it WAS loose and had went on WAY too easy.......you see I live in a desert.....and it's summer AND my case had gotten stuffed in my mail box for oh at least a few hours before I got home and went to put it on. Now after both it and I have cooled off and had a kick a$$ nap, it fits quite well. Since it's little baking in the desert episode it may never be as tight as it would have been but it is very snug over all and no longer has any gaps or bulges.
As for the holster.....maybe it is because I am left handed or maybe mine it's just extra tight in the holster, but it is a chore to get outso I put it in my pocket.I may try to work with the holster some but together with case and holster it's pretty dang big. I will use the holster on a limited basis more then likely.
***EDIT***
Since I don't really care for the holster I still feel I over paid, but since the soft cover fits better now I don't feel I over paid quite as much.
Sent from my MB855 using XDA App
Personally speaking, I wouldn't use the Defender for day-to-day protection. There are many other options available which offer less bulk and less lint-grabbing.
The Defender is perfect for rough users such as construction workers, farmers, soldiers, truck drivers, etc. The Defender has protected my MoPho twice already while on duty. Both were scenarios where I feel a 'lesser' case may have allowed damage to the device.
$30 is nearly a third of the cost of replacement under insurance. It is a tad on the expensive side. However, I think this is the very best level of personal device protection short of encasing it in a brick of silicon gel.
Compared to the defender I had on my evo the photon defender is perfectly tight. I went straight to radio shack and bought the defender after I bought my photon at sprint 3 days ago and I've only taken it off once to install my new sd card yesterday. As far as it sitting in the holster just make sure you push the rubber in all around the mounting clips on the sides. If they stick up a little it won't secure correctly. I've used defender cases before so I knew what I was getting but I must say this one is very well built.
The only thing that I don't like about the defender cases is that the screen protector just seems to take away from the beauty of device screens. I had my evo in a defender case for a week. I took it out one day and once I saw the screen again I was floored to how much I was missing by having the defender plastic over it!
And boom goes the Shooter
I've had the defender for 3 weeks now and I love it but it isn't for everyone. If you want a somewhat rugged smartphone that can take a few drops there are plenty of cases for you to choose from. If you want a case that protect your phone from falling out of a speeding vehicle then you want the defender, I should know i accidentally left my phone on top of my vehicle when driving away one late night.
It is bulky but that is fine, I don't want a sleek phone that breaks. This thing is like a brick. If you are playing around with the software and usually bork your phone you may want an easier to remove case. I hate doing battery pulls because it takes too long to remove this case and you end up with too many parts in your hands. This case is my insurance policy. Its a great case for people who play hard with their phones. The commuter case is a great case too but you have to match the case to your lifestyle. For me, I wont buy a phone that doesn't have a defender case.
In my experience the phone does not move around inside this case. It stays locked tight in its plastic shell. The rubber can be stretched easily but it is form fitting to the plastic shell and has just enough play to make it comfortable to remove. You have to tuck the rubber in all around the phone, as well as on the sides and on the back near the kickstand. Failure to do so will cause it to shift around but if you properly put this case together it shouldn't move at all. If it does then you may want to call Otterbox.
Now the defender series comes with the adjustable holster. If you do not use a holster then you may want a commuter series case. This thing isn't too easy to get in and out of your pocket since the rubber does grip well to cotton pockets. I use the holster about half the time and keep this thing in my pocket the other half. I'm okay with this but if you wear really tight skinny jeans you'll probably hate this case. So if you don't use holsters or you wear skin tight pants then you should get something else.
The screen protector causes glare and degrades the visual quality of the screen. The camera lens also has a protector over it which I find does degrade the camera quality if it is not properly cleaned. I don't find this to be a deal breaker because I could easily remove that piece of protective plastic. If anything I wish it was removable and replaceable out of the box.
Its a great case that can take a ton of abuse and leave your phone looking brand new.
sub2k1 said:
This thing is a brick.
Click to expand...
Click to collapse
I cringe at your use of this term!
Car Dock & case.
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
I never tested it on the car dock but I can guarantee you it does not work with the HD Dock. While it is not too difficult, you don't want to disassemble this case on the regular. Reassembly is a *****.
droidevo1 said:
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
Click to expand...
Click to collapse
No, I can tell you it's not compatible....I have the Commuter and it doesn't even work in the Car Dock.
I was hoping that by taking off the outer rubber shell of the defender series, that maybe the hard cover would still fit in the car dock. I'll let you know in a few weeks when everything finally arrives in the mail.
Yeah, let us know.....I even bought a cheapo $5 case (the thin plastic ones) just to try it.....nope!! Wouldn't work.
Yeah this case is still a lint magnet even without putting in my pocket and now I have some dust between protective screen and the actual screen.....of course some compressed air took care of it but I had to open it for that. I also worry a bit about heat while tethering. Not that it gets anywhere near as hot as my htc hero did (could fry an egg on it) but if it got warm enough to feel trough hard case AND the soft rubber it must have been pretty warm inside (does it get hotter doing wifi tether as opposed to usb & which uses more battery).
Sent from my MB855 using XDA App
Does anyone know what the difference is between the $50 Defender (Revision A) and the first revision that other sites (other than otterbox.com) sell? The difference in the model # is the letter A at the end.
Can someone post pictures of this case on their phone? I have always bought otterbox defenders but im debating if i should buy another after a bad experience with the one for the Evo 4g.
Sent from my MB855 using Tapatalk
I don't think a picture will do it any justice. It is one of those things you are really going to want to see and touch in person to decide if you like it or not. I like mine, lint magnet and all because it makes me feel my Photon its safe and for that I am willing to live with the trade off of some lint and a little extra bulk. Of course every time I take off the case to clean it I remember just how sexy a naked Photon is and I consider slapping on an invisashield screen protector and going naked.
Sent from my MB855 using XDA App
I just received my otter box defender in the mail today. I bought mine at amazon for $27 + $5 S&H. The case appears to be genuinely an otter box. The box it came in was damaged and opened, but the case itself is fine. My guess is that the amazon ones are cheaper because they are in damaged boxes.
As far as I'm concerned though I'll take the damaged packaging for the $20 savings.
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
IUH1991 said:
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
Click to expand...
Click to collapse
Bugger, just ordered the Defender, does it really add so much bulk?
Sent from my MB855 using xda premium
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!
My S6 edge will be arriving in under a week and just want to know your thoughts. I've never really put a case on a phone, but this is 1. Hugely expensive and 2. Looks a bit fragile.
I just think cases add bulk and make the phone look terrible... But if I do drop it I don't want it to smash to pieces.
Sent from my HTC One M8 using XDA Free mobile app
I always put a slim case on my phones. The Edge seems a lot more fragile than my old S3, especially with the glass back, so this was a must for me. I also dislike bulk which is why I hate otterboxes, but a thin protective barrier is better than letting the phone fall (or land) unprotected IMHO. I usually opt for the soft TPU cases. I bought a Spigen tough for my edge and I've been enjoying it so far. It doesn't add too much bulk.
This thing is too slippery to use without a case and with the back made of glass, I put a case on it. I used a Spigen Neo Hybrid. Very slim case and gives you a bit of grip, doesn't add bulk to phone. Works with wireless charger too.
Here is a brief review of the Sammy clear bumper...
Cant get much more minimal but among all the cases I've owned I would vote it least likely to succeed in a drop but there are other factors.
The phone doesn't lose any pretty to my eyes and it does get the phone off the table both screen side and camera wart side by about .00001 millimeters. Another thing I noticed is the phone when naked is actually thin enough combined with the sloping sides along the long edges both on the screen and back side to make it so that it isn't easy to pick up off the table. Not that its hard but I had to pay just an itsy bit of attention to doing it, adding the case gives me just enough to turn it back into the ordinary thoughtless process of picking up a phone. The case is about as slippery as the phone itself but it does feel quite a bit less like it might squirt out of my hands as it acts to flatten out the curve on the back side edges which it fills it in slightly giving me more area on the to grip. This flattening out of the underside along the long edges also plays into comfort when holding the phone in landscape for extended periods. Other than that the only thing I can note is that my anus felt a little stretched forking over 30 bucks for it which I'm guessing is north of 90% profit. Still for now it is the only case I've found that leaves the pretty while at least protecting it for ordinary use wear if not drops.
Has anyone tried any of the cheap tough/tank/rugged cases of ebay or from any of the chinese sites like the ones below? I know they're basically knock offs of more expensive cases, but wanted to see if anyone is using them and if they're decent enough quality. I have a thin clear gel case at the moment which is fine for me as I am generally careful with my devices but fancied the option of having something with more sturdy protection.
http://www.ebay.co.uk/itm/182054056073?_trksid=p2060353.m1438.l2649&var=483155764923&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/401042083390?_trksid=p2060353.m1438.l2649&var=670633918779&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/182056506581?_trksid=p2060353.m1438.l2649&var=482988547752&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/172108484090?_trksid=p2060353.m1438.l2649&var=471029139174&ssPageName=STRK%3AMEBIDX%3AIT
Ended up ordering one of these, great fit and quality, feels solid and quick and easy to put on/take off. Delivered really quickly and came with one of those small stylus that clip into the headphone jack and a film screen protector(I didn't fit it), which unfortunately like a lot of them doesn't fit the full screen.
http://www.ebay.co.uk/itm/391462198543
Sent from my SM-G930F using Tapatalk
I had two of those cases for my Nexus 5. Came with the same stylus and everything. One of them had the flip cover, but it ended up breaking off.
It's a pretty good case. I generally just use my nexus 5 around the house these days, using those cases, my phone has no visible damage. Though, bear in mind that the Nexus 5 had a lot less glass built into it.
EasyDanger said:
I had two of those cases for my Nexus 5. Came with the same stylus and everything. One of them had the flip cover, but it ended up breaking off.
It's a pretty good case. I generally just use my nexus 5 around the house these days, using those cases, my phone has no visible damage. Though, bear in mind that the Nexus 5 had a lot less glass built into it.
Click to expand...
Click to collapse
Yea I had the same type for my Galaxy S4, always wanted the one with the flip/door ('Armour view' I think it was called) cover on it but never got it. I had read about the door hinge being a bit fragile and prone to breaking also.
This one for the S7 is great though, really nice sturdy fit and cheap as well. Its not quite as rugged as the ones in the links I look at but its handy as the case can be taken off and put back on quickly if needed, whereas the other ones are really intended to be put on and left on.
you can check my reviews , for now , i love my ottrbox and a cheaper product from amazon
https://www.amazon.com/dp/B01AMZ97KG
I've got the Artech Little Rock. It's cheap ($29, and a 20% off coupon put it at about $24) and it's as rugged a case as I've ever had. The bezel is a bit hard to snap in, but that only makes it secure the phone that much more