Related
Hello folks
Did you know that i have been using viper4fx since 5.0
update
Here are simple steps to install
1.disable nu player from devloper options
2.download SELinux mode changer and install busybox from
playstore
3.open and change the mode from Enforcing to Permissive
4.download viper4fx zip from here http://forum.xda-developers.com/attachment.php?attachmentid=3104683&d=1420730076
Here are some kernel configurations simly paste them in sdcard http://download634.mediafire.com/bt3tghqgq2dg/rcz2lapl99igd0a/ViPER4Android.rar
dont flash the zip . open the zip and pull the apk from zip
from system/priv-app and simply install it
before installing viper disable audioFX
Dats it install the drivers and enjoy
Tested and working On Resurrection Build 5.2.7 and 5.2.9
NOTE : TEMPORARY FIX FOR MUSIC PLAYER FC IS DIABLE MUSIC AND INSTALL GOOGLE PLAY MUSIC
Thanks bro
rasry said:
Thanks bro
Click to expand...
Click to collapse
Does this work for 5.1.1?
Ota with these apps installed is impossible ! Full flash stock rom before ota
This is at your own risk !
I am not responsible for dead sdcards, thermonuclear war or you getting fired because the alarm app failed
If you point the finger at me for messing up your device, I will laugh at you
I am not responsible if your phone becomes a hipster and claims to have been modified before it was cool
I am not responsible for what you do with your computer, be it a laptop or a desktop/whatever and your phone as well
What are c-apps ?
https://cyngn.com/c-apps
Click the link to learn more
Requirements :-
C-apps package
Es file explorer OR aroma file manager
1) Install es file explorer (or boot to twrp, mount system in options, disable only mount system read-only and flash aroma file manager)
2) (Es file explorer users only) enable root explorer and mount system read-write
3) now rename /system/priv-app/dialer -> /system/priv-app/dialerx
4) similarly, rename /system/app/incallui -> /system/app/incalluix
5) (es file explorer users only) you may experience app crashes. Don't worry about them and reboot to twrp
6) flash c-apps package
7) (aroma file manager users only) mount system read-write in twrp options and disable the mount system read-only checkbox, then flash aroma file manager again and rename /system/app/incalluix -> /system/app/incallui (remove the x) and do the same to /system/priv-app/dialerx -> /system/priv-app/dialer (remove the x, do not change the case of the letters ! )
8) (aroma file manager users only) exit it and reboot to system
9) (es file explorer users only) follow step 7 after booting into android
10) (es file explorer users only) reboot your phone
11) now, disable these apps after booting into android (they do not work)
(I couldn't find the time to upload screenshots, coming soon !)
Edit :- screenshots added, check attachments
Truedialer works (partially, incallui doesn't work, dualsim works) but I prefer stock that is why I disabled it
Only use 1 dialer app or they may conflict !
Working :-
Cm account
Gallery
Email
Calendar
True caller service
Cm anti-theft
Screencast screen recorder
Etc etc
Audiofx is not working but maxxaudio tuner and audiofx are the same thing
Thanks, it works.
1. I couldn't find "disable only mount system read-only" in TWRP. Anyway, I flashed Aroma File Manager,
2. renamed said files, exited Aroma,
3. flashed C-Apps package,
4. again flashed Aroma, went inside /system to rename files, they were replaced by DailerNext and InCallUiNext, exited Aroma,
5. rebooted to system.
6. Found that stock apps have been replaced(Nevermind, I'm not fan of them anyway).
I followed TWRP procedure.
krishna442 said:
Thanks, it works.
1. I couldn't find "disable only mount system read-only" in TWRP. Anyway, I flashed Aroma File Manager,
2. renamed said files, exited Aroma,
3. flashed C-Apps package,
4. again flashed Aroma, went inside /system to rename files, they were replaced by DailerNext and InCallUiNext, exited Aroma,
5. rebooted to system.
6. Found that stock apps have been replaced(Nevermind, I'm not fan of them anyway).
I followed TWRP procedure.
Click to expand...
Click to collapse
If you followed the procedure correctly, that wouldn't have happened
Anyways, I'll upload the 2 stock apps the got replaced and a file that contains permissions that need to be applied to them
[email protected] said:
If you followed the procedure correctly, that wouldn't have happened
Anyways, I'll upload the 2 stock apps the got replaced and a file that contains permissions that need to be applied to them
Click to expand...
Click to collapse
I thought so, I couldn't find "mount system read-only."
@[email protected] check attachment for screenshot
krishna442 said:
I thought so, I couldn't find "mount system read-only."
Click to expand...
Click to collapse
I'll look into this
In the meantime, try reflashing twrp
krishna442 said:
I thought so, I couldn't find "mount system read-only."
Click to expand...
Click to collapse
The option is there, just checked....in the bottom left of the mount section
[email protected] said:
I'll look into this
In the meantime, try reflashing twrp
Click to expand...
Click to collapse
[email protected] said:
The option is there, just checked....in the bottom left of the mount section
Click to expand...
Click to collapse
Thanks, I did, and there's this option .
krishna442 said:
Thanks, I did, and there's this option .
Click to expand...
Click to collapse
Strange....
I'll add this information to the op so that if anyone faces the same issue, they'll know what to do
Thanks
Get audiofx apk from teamsek or any cyanogen build of 5.1.1 install manually thats working
i m using write now with audio tunner
install the apk i have uploaded manually working fine along with audiotunner
sahil chandel said:
Get audiofx apk from teamsek or any cyanogen build of 5.1.1 install manually thats working
i m using write now with audio tunner
Click to expand...
Click to collapse
Send me a detailed guide via pm (what did you exactly use, etc) and I'll add it to the op
And, maxxaudio tuner and audiofx are the exact same thing....no difference...both are from maxxaudio....same dev
sahil chandel said:
Get audiofx apk from teamsek or any cyanogen build of 5.1.1 install manually thats working
i m using write now with audio tunner
install the apk i have uploaded manually working fine along with audiotunner
Click to expand...
Click to collapse
I just tried it out
Didn't work
Stick with audio tuner on op2 its the same thing
[email protected] said:
I just tried it out
Didn't work
Stick with audio tuner on op2 its the same thing
Click to expand...
Click to collapse
its working install manually see screenshots
sahil chandel said:
its working install manually see screenshots
Click to expand...
Click to collapse
it isn't
just tried
and that does not look like official audio tuner
[email protected] said:
it isn't
just tried
and that does not look like official audio tuner
Click to expand...
Click to collapse
bro thats audiofx.apk.....not audio tunner i have both audiotunner & audiofx.apk look 2nd screenshot i used them combinely too during headphones....gives awesome bass combination
sahil chandel said:
bro thats audiofx.apk.....not audio tunner i have both audiotunner & audiofx.apk look 2nd screenshot i used them combinely too during headphones....gives awesome bass combination
Click to expand...
Click to collapse
my bad
it doesn't look like the apk in the c-apps package
[email protected] said:
my bad
it doesn't look like the apk in the c-apps package
Click to expand...
Click to collapse
use the app that i hv uploaded
its from teamsek cm12.1
krishna442 said:
I thought so, I couldn't find "mount system read-only."
@[email protected] check attachment for screenshot
Click to expand...
Click to collapse
Thanks
But that does not look like official twrp
http://twrp.me/devices/oneplustwo.html
[email protected] said:
Thanks
But that does not look like official twrp
http://twrp.me/devices/oneplustwo.html
Click to expand...
Click to collapse
Yep, even I just noticed it. Omg. I'm really getting dumb these days. Thanks a lot.
Samsung Galaxy Tab A 7.0 LTE/WIFI 2016 TINKER EDITION ROM (DEOXED/ROOT/XPOSED)
============================================
Update 01/04/2017
-----------------------
Tinker Edition V5.1 is now out.
* Re-added Samsung stock camera and gallery
* revert back to stock vold to fix issues people are having with micro sdcards
Now available for the SM-T285, SM-T280 to follow
Update 10/29/2016
------------------------
TWRP for the SM-T285 here
Early Build of TWRP for the T285 (see post by @ashyx will update this if an official version is released. The T280 version should be available not far behind I believe
Update 09/21/2016
-----------------------
V5 now out (root, deodexed, xposed) for the SM-T280/T285, still working on the SM-T280
Update 09/20/2016
------------------------
Turns out this device is not as locked as we all thought it too be. See thread below for my ordeal and more details:
http://forum.xda-developers.com/galaxy-tab-a/help/resources-samsung-galaxy-tab-7-0-2016-t3431022
Modifications:
===========
* Based on LMY47V.T285XXU0APCN
* Stock Boot and Recovery (Not much choice since the bootloader is locked)
* Busybox
* Hijacked Vold (using CM 12.1 sources) to run shell scripts stored in /data/scripts/vold.init
* Removed Touchwiz launcher and redundant samsung apps (Hancom office, Kidzone), replaced with Trebuchet
* Enabled r/w to the external SD Card
* Dolby Atmos mod (09/11/2016) (thanks to @Nando14sunny)
* Deodexed/Xposed (09/13/2016) (thanks to @wanam and @rovo89)
* soft linked /etc/hosts to /data/scripts/hosts and can be edited using adb shell (09/13/2016) (thanks to @venomrat)
* V5: root chainfire's SuperSu 2.78 (09/21/2016) (thanks to @Chainfire)
* stock boot animation
Special thanks also to @ashyx for initially taking a look at this device , I haven't given up on rooting this device yet.
Special thanks to @klemen241 for helping me try out the SM-T280 build
Haven't done extensive testing on Xposed modules, but the pokemon go iv mod/hacked worked and that was good enough for me (Before pokemon Go was patched). If you use this ROM feedback is highly appreciated
NOTES: To be safe, perform a cache wipe using recovery. I didn't need to do this personally but I haven't tested all use cases
NOTES: Since this rom is deodexed, the first boot will take quite a while, so please be patient .
NOTES: if you are coming from V2 and are using the mount_ext4 apps2sd scripts please update it for additional support for the V3 ROM HERE:
https://github.com/jedld/smt285_data_scripts
NOTES: (09/13/2016) Unfortunately, the V3 build fails the Google SafetyNet check, will be a problem if you play Pokemon Go
Other Notes: Removed support for zygote.init scripts in V3 as I am now using the app_process32_xposed binary, will work to get this back soon. I haven't had a need for zygote scripts though. The vold.init scripts shoud still work as before if you are using the apps2sd script
Installation Instructions:
Odin or Heimdall Required. I you are coming from the Stock Rom please wipe/factory reset to be sure. If you are upgrading from V1 or V2 you are not required to wipe unless there are problems. If you are upgrading to V3 cache wipe is recommended using recovery.
--FLASH AT YOUR OWN RISK--
1. Make sure to backup of your data and have a copy of your stock Rom in case something goes wrong.
2. Make sure your device is OEM unlocked. (Enable Developer settings and Enable the OEM unlock settings)
3. Extract ZIP file below and flash the tar.md5 file using ODIN, for details on this kindly look for instructions in the xda site.
4. For Heimdall you can use 7zip to extract the system.img from the tar.md5 and just flash the system.img itself.
Choose the appropriate download for the model (wifi only T280/ lte T285) that you have:
WIFI ONLY Download (SM-T280)
==========================
Link (V5 Deodexed, Rooted and Xposed):
https://mega.nz/#!0Jdg0a4D!XWLES1BwCPrkBlUzqNhRfRi_91LOdawYHydQ_scV2dI
Link (V3 Deodexed and Xposed - with special thanks to wanam with his custom Xposed build (86.0), and credits also to rovo89):
Download from Mega (v3 09/13/2016)
LTE Version Downloads (SM-T285)
===========================
Link (V5.1 Deodexed, Rooted and Xposed):
https://mega.nz/#!ZFFTFKYZ!NAeajNUjIgYI7zOslpWoJ2AeJ-NCKG0Ut8Buz_6eCgU
Link (V3 Deodexed and Xposed - with special thanks to wanam with his custom Xposed build (86.0), and credits also to rovo89):
Download from Mega (v3 09/13/2016)
Link (Original V2 odexed version):
Download from Mega (V2 09/11/2016)
If you have suggestions, send me a PM.
Other Notes (So people don't have to ask):
* I've tried to run superuser daemonsu, but unfortunately the sepolicy scopes for vold and zygote are too narrow in this device for supersu to use despite being root. In theory a version of daemonsu can be made specifically to run on this device with a somewhat castrated functionality though I don't have access to the source code to figure it out. Navigating the sepolicy landmine is hard.
WIFI ISSUES
=========
There are reports of wifi problems with the latest build due to wrong permissions with dhcp hooks, if so you can do the following (big thanks to @_mone):
Using adb shell:
Code:
su
mount -o rw,remount,rw /system
chmod 755 /system/etc/dhcpcd/dhcpcd-run-hooks
mount -o ro,remount,ro /system
/system is readonly by default, which is why you need the remount commands. Reboot your device after just to make sure.
Hi,
The mount_ext4_sdcard.sh script moves all apps to SD card on reboot?
Edit: did not read till the end. System apps are not move.
venomrat said:
Hi,
The mount_ext4_sdcard.sh script moves all apps to SD card on reboot?
Edit: did not read till the end. System apps are not move.
Click to expand...
Click to collapse
It won't by default for safety purposes, however you are welcome to edit the script and try to move them all
jedld said:
It won't by default for safety purposes, however you are welcome to edit the script and try to move them all
Click to expand...
Click to collapse
Thanks for your hard work. It's a pity this device is not as popular as their other models or more people would have already signed the petition.
I regret not doing more research before buying this tablet.
Hello there
At first i want to thank you for your hard work so far
Then i've got a question,
I just built this Tablet (LTE version) in my car. Now i'm on to configure it with Tasker to "act more like a car radio". It was really hard, because of the non rooted device.. But i did it so far
I used a sound mod, called Dolby Atmos (i think it's from lenovo?) on allmost every of my rooted devices to improve its sound.
I'm wondering if it would be possible that you could build in this mod inside a rom for me?
Normally i flash it as a zip file via a custom recovery so it's in the system files. but maybe you could edit it in there before the rom get flashed via odin? I could give you the zip, if u dont find it. It would be really nice!
Greetings from germany
Nando14sunny said:
Hello there
At first i want to thank you for your hard work so far
Then i've got a question,
I just built this Tablet (LTE version) in my car. Now i'm on to configure it with Tasker to "act more like a car radio". It was really hard, because of the non rooted device.. But i did it so far
I used a sound mod, called Dolby Atmos (i think it's from lenovo?) on allmost every of my rooted devices to improve its sound.
I'm wondering if it would be possible that you could build in this mod inside a rom for me?
Normally i flash it as a zip file via a custom recovery so it's in the system files. but maybe you could edit it in there before the rom get flashed via odin? I could give you the zip, if u dont find it. It would be really nice!
Greetings from germany
Click to expand...
Click to collapse
we could try, could you point me to a rom that has the specified libraries for Dolby?
Thank you, for the fast answer!
Here is the flashable zip of the Dolby Atmos, mod i used successfully on my other devices:
Mega
Greetings
Nando14sunny said:
Thank you, for the fast answer!
Here is the flashable zip of the Dolby Atmos, mod i used successfully on my other devices:
Mega
Greetings
Click to expand...
Click to collapse
Ok, wish granted, updated the ROM to include Dolby ATMOs, just redownload the ROM from the link in the main post.
jedld said:
Ok, wish granted, updated the ROM to include Dolby ATMOs, just redownload the ROM from the link in the main post.
Click to expand...
Click to collapse
Wow thank you! I'll test it right now
Edit:
It works like a charm! You really improved my devie with it!
Hi,
If it's not too troublesome, perhaps the next version can symlink the host file to a r/w folder so that ads can be blocked.
Thanks.
venomrat said:
Hi,
If it's not too troublesome, perhaps the next version can symlink the host file to a r/w folder so that ads can be blocked.
Thanks.
Click to expand...
Click to collapse
Possible, though the only r/w partition is data and cache, and it may potentially cause problems when you suddenly try to do a wipe. I'm working on deodexing and porting xposed framework for now. Either that if you've got some IP addresses that need to be blocked I can create an edition that has those entries. I'll see what I can do though there might be away to do it without breaking factory reset/wipe cache.
jedld said:
Possible, though the only r/w partition is data and cache, and it may potentially cause problems when you suddenly try to do a wipe. I'm working on deodexing and porting xposed framework for now. Either that if you've got some IP addresses that need to be blocked I can create an edition that has those entries. I'll see what I can do though there might be away to do it without breaking factory reset/wipe cache.
Click to expand...
Click to collapse
No hurry. I can wait. What you are doing now is more important. :good:
venomrat said:
No hurry. I can wait. What you are doing now is more important. :good:
Click to expand...
Click to collapse
Wish Granted. As a bonus, the latest version of the ROM is now deodexed and Xposed, please refer to the main post for the updates.
Feedback is appreciated.
How can i change the dpi?
Sent from my SM-T285 using XDA-Developers mobile app
corzradio said:
How can i change the dpi?
Sent from my SM-T285 using XDA-Developers mobile app
Click to expand...
Click to collapse
May need to modify build.prop, you may do this yourself here:
http://forum.xda-developers.com/galaxy-tab-a/how-to/guide-samsung-galaxy-tab-7-0-sm-t285-t3438296
Also there may be an Xposed framework modules that do that. Not sure though since I'm ok with the stock DPI
jedld said:
Wish Granted. As a bonus, the latest version of the ROM is now deodexed and Xposed, please refer to the main post for the updates.
Feedback is appreciated.
Click to expand...
Click to collapse
Thanks. Will need to find time to re-flash this weekend.
Regarding xposed have you actually tested any other modules that need root?
I already built a rom with xposed but it was all but useless because pretty much all the modules I use need root.
most of those I tried don't need root so far (youtube adaway, pokemon go iv). Haven't tried those that need root but I suppose those wouldn't work.
I use app settings and it works for dpi change, and you are welcome. I am glad to test stuff, its fun haha. If anyone has questions about t280 you can ask me
how can i boost the volume? since its not rooted i cant find the mixer.xml
Hello everyone, I have a problem on which audio enhancement to use? I tried to install Viper4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk, but it does not install the necessary drivers, my problem is that I use Spotify and the sound is very simple, I would need to strengthen the bass a little bit, I have the B&O headphones.
Thanks
the best audio package by far is A.R.I.S.E.
I use magisk, but it should work with SuperSU too.
You need to have busybox installed to /system/xbin for Viper4Arise to work properly.
When you flash the ARISE package the first time, it will drop a file "arise_customize.conf" into /sdcard
This is what you use to customize which ARISE modules you want to be installed when you flash the ARISE installer the second time.
I have attached the arise_customize.conf file that I use, and know works very well on LG-V20.
For many reasons, though, I recommend looking into switching to magisk over supersu.
After you have busybox installed properly, and after you have Viper4ARISE flashed properly with the customize file used, there is a module in the magisk app repository "universal_deep_buffer_remover".. this is the ONLY thing I have found that correctly removes the deep buffer without breaking the HIFI dac on the V20.
(you can also easily install busybox from the magisk manager app too, although I recommend flashing that module from recovery first. You may need to play with that its triicky. Install from recovery and/or from within the magisk manager app.)
it should go without saying that before you start installing this you will need to remove any other audio mods that you have installed previously, or the best bet being reflash your ROM to get a fresh start.
syndre said:
the best audio package by far is A.R.I.S.E.
I use magisk, but it should work with SuperSU too.
You need to have busybox installed to /system/xbin for Viper4Arise to work properly.
When you flash the ARISE package the first time, it will drop a file "arise_customize.conf" into /sdcard
This is what you use to customize which ARISE modules you want to be installed when you flash the ARISE installer the second time.
I have attached the arise_customize.conf file that I use, and know works very well on LG-V20.
For many reasons, though, I recommend looking into switching to magisk over supersu.
After you have busybox installed properly, and after you have Viper4ARISE flashed properly with the customize file used, there is a module in the magisk app repository "universal_deep_buffer_remover".. this is the ONLY thing I have found that correctly removes the deep buffer without breaking the HIFI dac on the V20.
(you can also easily install busybox from the magisk manager app too, although I recommend flashing that module from recovery first. You may need to play with that its triicky. Install from recovery and/or from within the magisk manager app.)
it should go without saying that before you start installing this you will need to remove any other audio mods that you have installed previously, or the best bet being reflash your ROM to get a fresh start.
Click to expand...
Click to collapse
You forgot to attach the file
Looking forward to it, I've always used Viper and never heard of this one, I'm eager to try it.
UL7RA said:
You forgot to attach the file
Looking forward to it, I've always used Viper and never heard of this one, I'm eager to try it.
Click to expand...
Click to collapse
so sorry, my fault
I did attach the file but I didn't see that it rejected the .prop extension, I edited that first post with it uploaded as a text file, same file is attached here too. Remove the .txt and put it on /sdcard
If you open the file and change the install core to =true, you will only have to flash the arise zip once (instead of letting it place that customize.prop file on SD card the first time around).
syndre said:
so sorry, my fault
I did attach the file but I didn't see that it rejected the .prop extension, I edited that first post with it uploaded as a text file, same file is attached here too. Remove the .txt and put it on /sdcard
If you open the file and change the install core to =true, you will only have to flash the arise zip once (instead of letting it place that customize.prop file on SD card the first time around).
Click to expand...
Click to collapse
Unfortunately, I believe not much of ARISE works on my H990DS, as the first time I flashed using your prop file, I got arkamys audio to continuously force close. Uninstalled it by editing the prop file, reboot. Tried opening Dolby Atmos, force close. I guess I'm left with Viper, which I've had before anyway. I'm on magisk, if that matters, but I saw that the magisk compatibility was set to true.
UL7RA said:
Unfortunately, I believe not much of ARISE works on my H990DS, as the first time I flashed using your prop file, I got arkamys audio to continuously force close. Uninstalled it by editing the prop file, reboot. Tried opening Dolby Atmos, force close. I guess I'm left with Viper, which I've had before anyway. I'm on magisk, if that matters, but I saw that the magisk compatibility was set to true.
Click to expand...
Click to collapse
If you're using SuperSU the only other thing that I could think of would be making sure BusyBox is installed
In the future if something like that is force closing you can either just freeze the application or delete the app folder in system partition using recovery.
If you haven't yet tried flashing your ROM again, letting boot up and sit for a few minutes, then flash busybox and arise again on a fresh ROM installation, that is definitely something to try.
I'm just curious, is there a reason why you prefer SuperSU over magisk?
I use the BusyBox flashable installer made by as from here. He's got lots of other neat things on that thread to!
https://forum.xda-developers.com/showthread.php?t=2239421
Sent from my LG V20 using XDA Labs
syndre said:
If you're using SuperSU the only other thing that I could think of would be making sure BusyBox is installed
In the future if something like that is force closing you can either just freeze the application or delete the app folder in system partition using recovery.
If you haven't yet tried flashing your ROM again, letting boot up and sit for a few minutes, then flash busybox and arise again on a fresh ROM installation, that is definitely something to try.
I'm just curious, is there a reason why you prefer SuperSU over magisk?
I use the BusyBox flashable installer made by as from here. He's got lots of other neat things on that thread to!
https://forum.xda-developers.com/showthread.php?t=2239421
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
No, I'm not using SuperSU, I'm on Magisk (14.0). You might have missed when I said that. BusyBox is installed and running fine, and I managed to fix everything by flashing the ARISE zip, but with a modified prop file.
UL7RA said:
No, I'm not using SuperSU, I'm on Magisk (14.0). You might have missed when I said that. BusyBox is installed and running fine, and I managed to fix everything by flashing the ARISE zip, but with a modified prop file.
Click to expand...
Click to collapse
ahh ok, yeah misunderstood that you got it going
great
Sent from my LG V20 using XDA Labs
Hello, thanks for replying ... I installed my system again with MagiskSU, but when I installed ARISE, I could not understand how to install it ... I downloaded the MAGNUS OPUS package and tried to flash with the TWP, and there was ERROR 1, I put both your "arise_customize.prop" in my sdcard (/sdcard/arise_customize.prop) and what is in the ARISE forum, but without success ...
let's go to the beginning ... first I install MagiskSU, then BusyBox, then I put the file on sdcard? and then try to install? that's what i did
what am I doing wrong?
Thanks for the cooperation
pkrename said:
Hello, thanks for replying ... I installed my system again with MagiskSU, but when I installed ARISE, I could not understand how to install it ... I downloaded the MAGNUS OPUS package and tried to flash with the TWP, and there was ERROR 1, I put both your "arise_customize.prop" in my sdcard (/sdcard/arise_customize.prop) and what is in the ARISE forum, but without success ...
let's go to the beginning ... first I install MagiskSU, then BusyBox, then I put the file on sdcard? and then try to install? that's what i did
what am I doing wrong?
Thanks for the cooperation
Click to expand...
Click to collapse
The order I flash those things is first the ROM (if your ROM has any audio mods included as separate zips in the main rom zip, most modded stock roms do this, remove that. Either delete any viper or dolby zips from the main rom zip, or comment out the libes that install them in the update-script FIRST).
Second I flash busybox, it should say "installng to /system/xbin".
Third I flash Magisk. The current latest version is v14.5 and I can confirm it works n my V20.
After that, I boot into the rom and let it up the stock audio configuration to and confirm that you have sound working initially. After it settles down for a few minutes, I go back into recovery and then flash the arise zip.
The first time you flash ARISE, it checks to see if the customize prop file is present on/ sdcard and if it is it will use those options. If the customize file is not present the only thing it will do is install the core part of ARISE, and it will place that customize.prop file onto /sdcard for you. If that happens you'll get a message saying so, instructing you to edit it to select which modules you want. The customize.prop file I attached is what I use, you don't necessarily have to use those exact settings, you can choose what you want and play around with it and see what works. Trial and error is a way of life doing these mods.
Flashing the same ARISE zip a second time once you edited the prop file to your liking will install what you choose instead of just the core files.
Reboot back into your ROM and open the magisk manager app. You'll notice there is a module there for ARISE compatibility. At this point your equalizer apps should be functioning, but only for local media files. To get the sound to process through the Viper equalizer using streaming music you need to remove the deep audio buffer. Magisk manager allows you to do this very easily by just downloading the universal deep audio remover module from the repository in magisk manager.
While you're at this point, it's a good idea to also download and install the BusyBox module from the magisk manager app too. You can install the magisk BusyBox module on top of what you already flashed in recovery, thats how I do it. If there's any conflicting files the magisk module takes priority. If anything, doing this gives me the peace of mind that BusyBox is for sure installed correctly.
After installing the BusyBox and deep buffer remover modules from the magisk manager app, reboot and that should be it! The only thing you need to do now to take your already amazing DAC to the next level is adjust the equalizer settings to what you like. This is a never ending quest to make whatever youre listening to sound perfect. Frustrating but fun at the same time.
Of course there are a ton of things that could go wrong, each case seems to be different, so there's no way to let you know what to do before a problem shows up.
Try that and let me know how it goes. Good Luck!
syndre said:
The order I flash those things is first the ROM (if your ROM has any audio mods included as separate zips in the main rom zip, most modded stock roms do this, remove that. Either delete any viper or dolby zips from the main rom zip, or comment out the libes that install them in the update-script FIRST).
Second I flash busybox, it should say "installng to /system/xbin".
Third I flash Magisk. The current latest version is v14.5 and I can confirm it works n my V20.
After that, I boot into the rom and let it up the stock audio configuration to and confirm that you have sound working initially. After it settles down for a few minutes, I go back into recovery and then flash the arise zip.
The first time you flash ARISE, it checks to see if the customize prop file is present on/ sdcard and if it is it will use those options. If the customize file is not present the only thing it will do is install the core part of ARISE, and it will place that customize.prop file onto /sdcard for you. If that happens you'll get a message saying so, instructing you to edit it to select which modules you want. The customize.prop file I attached is what I use, you don't necessarily have to use those exact settings, you can choose what you want and play around with it and see what works. Trial and error is a way of life doing these mods.
Flashing the same ARISE zip a second time once you edited the prop file to your liking will install what you choose instead of just the core files.
Reboot back into your ROM and open the magisk manager app. You'll notice there is a module there for ARISE compatibility. At this point your equalizer apps should be functioning, but only for local media files. To get the sound to process through the Viper equalizer using streaming music you need to remove the deep audio buffer. Magisk manager allows you to do this very easily by just downloading the universal deep audio remover module from the repository in magisk manager.
While you're at this point, it's a good idea to also download and install the BusyBox module from the magisk manager app too. You can install the magisk BusyBox module on top of what you already flashed in recovery, thats how I do it. If there's any conflicting files the magisk module takes priority. If anything, doing this gives me the peace of mind that BusyBox is for sure installed correctly.
After installing the BusyBox and deep buffer remover modules from the magisk manager app, reboot and that should be it! The only thing you need to do now to take your already amazing DAC to the next level is adjust the equalizer settings to what you like. This is a never ending quest to make whatever youre listening to sound perfect. Frustrating but fun at the same time.
Of course there are a ton of things that could go wrong, each case seems to be different, so there's no way to let you know what to do before a problem shows up.
Try that and let me know how it goes. Good Luck!
Click to expand...
Click to collapse
Great Tutorial... but... in my phone... (H990DS) with custom root by DirtySanta, the Magisk v14.5 make this device no boot... does it work with version 14.0?
I have a LS997 and also see dirty santa. I run Schwifty's kernel, if that is of any interest to you.
Yes, v14 will be fine to use.
This is for anyone doing audio mods, check out sauron ainur audio, it's a Russian team that figured out a new/better way to mod devices,, (any variant) I've tried bout everything, and it is way better than arise, guitarded hero even chimed in on the forum and credited them as the real deal and not a poser basically, the bass is much tighter and puncher and tunable, must have magisk and u can have other mods along with it e.g.--v4a, James dsp, Arkamys, Dirac, etc. Read the thread!!! And it's easier to install. It will/is change android modding imo.
I was able to do it, but I only managed to release it on my device after upgrading to version 14.5... in version 14 it did not run... I did all the steps as it happened in my tutorial and now it is running the perfect V4A !! Thank you syndre was a great help!
I used to think arise was best, all magisk users should try sauron ainur audio mod, the only one I got to activate is the mk II beta 8. Easy to install if you follow directions and can use viper and other mods with it, they found a new way to do audio mods that's changing the game for audio it just ain't well known yet, read the thread, guitarded hero chimes in and validates them as the real deal and I can say it is awesome, tighter bass, clearer w/less congestion from non working/compatible ports. Message me if you need help or have general questions. Can be tricky to learn, (me anyway since I just started using magisk). Russian team I believe, try it out, good luck.
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
Beta 8 was only one i could get to activate quad dac, wanted to correct that, but the versions without dac activated still sound better than other mods with dac working, it's that good. Imo the bass is way more tunable and precise, and punchier which is important to me.
We are going to use 'Dirac' sound module extracted from OPPO smartphones by ARISE team to increase sound of any device.
We will install Dirac using 'ARISE sound system zip'
REQUIREMENTS-
*ROOT ACCESS
*Custom Recovery (TWRP RECOMMENDED)
INSTRUCTIONS-
1. Download ARISE SOUND SYSTEM ZIP and arise_customize.prop from links given below.
2. Now move "arise_customize.prop" to your internal storage.
* - optional steps - If you just want "loud sound", skip these
*If you want additional sound mods like viper4android Dolby etc, you need to open "arise_customize.prop" and write true in front of whatever MOD you want.
*I advice "mediatek" users "not to use ice mods" as it sometimes stops other modules like Viper4android and Dolby
3. Now boot your device into recovery mode (TWRP RECOMMENDED)
You don't need to wipe "anything"
Just "dirty flash" it
4. Flash the ARISE Zip
If you want to uninstall any module just scroll down and set "uninstall_module" value to "true" and flash the zip again
DOWNLOADS-
ARISE ZIP
arise_customize.prop
VIDEO TUTORIAL-
https://www.youtube.com/watch?v=iTwXjXXv6vA&t=51s
is this work on any droid version? eg: kk maybe?
majorfifth said:
is this work on any droid version? eg: kk maybe?
Click to expand...
Click to collapse
I don't see any reason why it shouldn't !
Most probably yes ,
No harm in trying
blacklisted.rock said:
I don't see any reason why it shouldn't !
Most probably yes ,
No harm in trying
Click to expand...
Click to collapse
btw, i have no luck on ridon os, dirac just stopped, yet with rr.
better trying than never
Updater process ended with error 1
amol.ml14 said:
Updater process ended with error 1
Click to expand...
Click to collapse
copy arise.customize.prop to internel directory
Same problem
majorfifth said:
btw, i have no luck on ridon os, dirac just stopped, yet with rr.
better trying than never
Click to expand...
Click to collapse
Same problem for me. Did you found solution how to increase sound on Ridon OS?