[Q] 5.0.1 MDK semi-brick help needed - Verizon Samsung Galaxy S 4

Hi everyone, I haven't been active in awhile, and decided to upgrade from 4.4.4 to 5.0.1.
Device is:
Verizon Galaxy S4
MDK / Loki
TWRO 2.8.7.0
was on 4.4.4
I used the FlashFire upgrade method, because I wanted to have that upgrade modem, baseband etc. everything I needed.
Prior to root, I upgraded my TWRP, I did a TWRP backup.
I downloaded Odexed 5.0.1 stock update from the thread, and followed the instructions, it installed but on final reboot, it just got stuck at the Samsung / Custom screen. When I went to boot into recovery, it's now the stock system recovery LRX22c.I545VRUG0C1
Gives an error on the bottom as
Code:
#MANUAL MODE#
Appling Multi-CSC
Applied The CSC-code: VZW
remove failed file /system/csc_contents/ (read only file system)
If I try to apply update via external storage, using stock update I get:
Code:
footer is wrong
signature verification failed
Anyway I can flash TWRP via adb, then just re-flash the rom with loki manually? Or anyway without having to use odin and downgrade? I won't lose loki root will I? What do I do? Thanks in advanced.

well I'm trying to flash back to MDK via odin, and I keep getting aboot.img failure.. i'm really at a loss here, I can't even odin back to MDK.

notstevek said:
well I'm trying to flash back to MDK via odin, and I keep getting aboot.img failure.. i'm really at a loss here, I can't even odin back to MDK.
Click to expand...
Click to collapse
What instructions did you use? SS and FF were made specifically for locked bootloaders so they require a different instructions for flashing. You basically ignored the benefits of being on MDK by doing whatever you did. Doesn't sound like you're on MDK anymore and I need more details to help. Someone else might be able to help you.
If all you wanted was the OC1 modem, could have just flashed it from here. People have reported issues with TWRP versions above 2.8.4.0-jfltexx.

Neffy27 said:
What instructions did you use? SS and FF were made specifically for locked bootloaders so they require a different instructions for flashing. You basically ignored the benefits of being on MDK by doing whatever you did. Doesn't sound like you're on MDK anymore and I need more details to help. Someone else might be able to help you.
If all you wanted was the OC1 modem, could have just flashed it from here. People have reported issues with TWRP versions above 2.8.4.0-jfltexx.
Click to expand...
Click to collapse
The tutorial said for mdk, I followed it exactly and it didn't work. I then ****ed up by flashing lollipop through stock recovery so it flashed the new baseband, and I removed loki. That's my bad, however I did follow the instructions and it didn't work. I should have just flashed 5.1 manually. Oh well. Is there safestrap for lollipop, or a way to downgrade to me7 to use safestrap?
Sent from my SCH-I545 using Tapatalk

SS isn't compatible with Lollipop. Recommend switching to FF, apparently it can flash Stang's ROM on stock OC1. Still need root. Or look into MultiSystem but I'm not knowledgeable with them but hear of success with them.
Sent from my SCH-I545 using Tapatalk 2.4.15

You can use king root to get root, then search for instructions to swap to supersu. From here should be able to install FF.
Good luck.
Sent from my SCH-I545 using Tapatalk 2.4.15

Related

SCH-I545L Upgrade MK4 to NC5 and Keep Root

Disclaimer: You own the responsibility for choosing to take this route versus the Factory OTA. If it breaks, you own both pieces.
This process uses an unsupported Safestrap. Issues with that program should NOT be reported to Hashcode.
If something goes wrong, you need to be sure that you have a way to recover. Back up first.
The SCH-I545L is a variant of the Verizon Galaxy S4 that's used for several carriers - for example, Bluegrass Cellular, Cellcom, Appalachian Wireless, and others. The "L" variant isn't compatible with kernels and bootloaders designed for the stock SCH-I545 so it needs different treatment.
This method allows you to upgrade from MK4 to the official NC5 root and retain root in the process. It's exactly the same process as the one introduced by @muniz_ri for the I545, found here.
Without his work, this would not have been possible.
Thanks also to @evilryry for his help with pulling the files together and with testing this upgrade.
This is a copy of the MK4-to-NC5 OTA hammered into shape to not flash the NC5 bootloader, and install SuperSU. When you're done, it's a stock, rooted NC5.
This will not upgrade the bootloader to NC5, which means that if anything goes wrong you can flash back to stock MK4 to recover.
However, back up your phone in Safestrap before you begin so you have something to revert to.
Steps to do this:
You must first ensure that your MK4 system is in factory stock condition, with no files modified, no Xposed framework, etc. You must have SuperSU and Safestrap 3.72 installed before starting. See post #2 in this thread for a script that you can run on your phone to ensure that it's pristine.
If your phone is not clean, flashing a no-wipe MK4 ROM image will repair it. Just make sure that you flash Safestrap 3.72 as well. ( Safestrap-JFLTE-3.72-kk-B01.apk)
Download Upgrade_I545L_MK4toNC5.zip from here,
MD5: c2e6673da0b235d9a3258c0ab46c8a65
Download I545L_Stock_Kernel_and_Modem.tar.md5 from here,
MD5: 693274326ad9d9209be0f0680bcb125e
Put the "Upgrade_I545L_MK4toNC5.zip" file onto the root of your external SDcard.
Reboot and open Recovery from the Safestrap screen. Do not wipe anything!
Flash the "Upgrade_I545L_MK4toNC5.zip" file into the stock slot.
When the flash is complete, Press "Home" and reboot into Downloader mode.
Using ODIN, flash " I545L_Stock_Kernel_and_Modem.tar.md5" by putting it into the PDA or AP slot.
The first boot will take a long time as the phone optimizes apps. Be patient.
Before trying this, there's a way to verify that your phone is "stock enough" for the flash to work.
Download the attached script file and push it to the root of your SDcard.
Then, open terminal emulator and type at the prompt:
su -c /storage/extSdCard/mk4-verify.sh
or
su
sh /storage/extSdCard/mk4-verify.sh
You MUST have busybox installed for this to work; otherwise, you'll get a bunch of "/system/bin/sh: cut: not found" errors.
If everything is right, you'll get no output. Otherwise, any tampered files will be listed.
If you choose to install a non-stock ROM image after your NC5 upgrade, you'll need a set of kernel modules to flash. @evilryry has built a ZIP containing those, available from here.
You flash these in recovery after flashing the ROM but before rebooting.
Also note that you should flash SuperSU at the same time
Reserved #3.
Rock on. Thanks k1mu. Hell of a help. I'll be happy to help if anyone has any issues, as I have the phone and have gone through your upgrade process.
Fellow 545L'ers, Just a note to addon if you choose to install a custom rom, on 3.72 safestrap, backup your stock slot, and install over stock slot. remember, flash rom, then flash modules, and very important flash supersu zip. or else you wont have root/safestrap on custom rom and you will have to odin back to 4.3 and start the upgrade process all over again!
@k1mu Nice job!
And please let me know if you have better luck than I have had trying to resolve the safestrap apk force close issue after the upgrade.
If we already have NC5 without root, is there a downgrade option so I can use this method? Sorry, I'm new....
Ampz55 said:
If we already have NC5 without root, is there a downgrade option so I can use this method? Sorry, I'm new....
Click to expand...
Click to collapse
Several threads discuss it...
sent by bajarom v2.2 kitkat
I've found threads on downgrading, including Surge's here: http://forum.xda-developers.com/showthread.php?t=2726868
but I figured downgrading using this method for the regular I545 would not work correctly.
Well first of all I'm not a developer but I consider myself decently knowledgeable. So, Not 100% sure but I believe that was to downgrade kitkat to jb with the jb bootloader intact in case you don't like kitkat or need to restart the whole process. I don't think you can get back to the jb bootloader once you upgrade it to kitkat. The way this process works is by updating the system and stuff but not the bootloader, leaving it at mk2 or mk4 in the 545L. So you can go back to the 4.3 and start again if you mess up. But the bootloader no, I think it's the same principle as not being able to Odin back to mdk because the bootloader updates. You can't downgrade it.
Have a screenshot showing my bootloader version (4.3) with kitkat baseband running hyperdrive 16.1
So forgive me if I'm wrong, but I believe if you take the ota or whatever to kitkat you're SOL for this posts process for root atm.
Edit, as with other phones, if anyone with this has upgraded via ota to kitkat you should be able to use @geohot "towelroot" method. Be sure to thank him too!
Sent from my SCH-I545L using XDA Free mobile app
Where can one find a No Wipe MK4 ROM?
Rom? No. Odin flash yes. It's a few pages back in the other 545L thread, also on sammobile site. You'll see me linking it to someone else and the other guy who caught the download. You download it and extract the file, put in odin ap slot and flash. You are better off though if you backup and factory reset beforehand. Also, you could just use kies 3 to update with then use towelroot then install supersu from play store.
Remember at some point on stock rom backup your apn using apn backup and restore.
If custom rom is desired: From then if you choose to use safestrap download "selinux mode changer" app in play store change to permissive. Then download the 3.72 safestrap linked in op, and flash supersu *zip* and then desired rom. Also you will find somewhere in other thread our modules I Dropboxed but if you can't find it (will be 2 or 3 pgs back) I will link again. Feel free to post here or pm if you need any help. FYI, 4.3 mk4 flash we have and kies are no wipe.
Sent from my SCH-I545 using XDA Free mobile app
---------- Post added at 03:11 AM ---------- Previous post was at 03:04 AM ----------
kmg90 said:
Where can one find a No Wipe MK4 ROM?
Click to expand...
Click to collapse
https://mega.co.nz/#!HYBVHRQY!AigKnk8oNokcStYZ6GR6l13t1oAa9bQsOHxjEMj1A2U +extract = 4.3 MK4 Odin flash. if you want root, easier option is to just use kies imo. or use this and do an ota. then use towelroot+supersu. you basically follow this http://forum.xda-developers.com/showthread.php?t=2784138 steps 5-7 use ss method heading.
Hello I was wondering do you know what the mms settings are ? I'm trying to use evolve app. And it won't automatically find the mms settings.
Sent from my SCH-I545L using XDA Premium 4 mobile app
blackbeard10 said:
Hello I was wondering do you know what the mms settings are ? I'm trying to use evolve app. And it won't automatically find the mms settings.
Sent from my SCH-I545L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try harvesting from this or the info Dallas posted in other 545L thread.
Sent from my SM-G900V using XDA Free mobile app
When I try to flash this update with Safestrap 3.72 I get an error. I've checked MD5 it's good, I can't flash the original upgrade either. Is there a permission's set wrong somewhere?
XRSTOY1 said:
When I try to flash this update with Safestrap 3.72 I get an error. I've checked MD5 it's good, I can't flash the original upgrade either. Is there a permission's set wrong somewhere?
Click to expand...
Click to collapse
Are you on 4.3? You probably have modified system files or something. For this to work you need stock minus supersu and safestrap. Though the easy way to do this now is just to upgrade with kies and use towelroot. Just plug phone up and use kies. or if you must do it the harder way..
download https://mega.co.nz/#!HYBVHRQY!AigKnk...bQsOHxjEMj1A2U Should be a zip so extract and flash(4.3 is only flash i know is publicly available, 4.4.2 nc5 might be too tho) then with odin and upgrade with ota or try this process again.
Sent from my Supercharged KT Powered S5
worked for me
decaturbob said:
Several threads discuss it...
sent by bajarom v2.2 kitkat
Click to expand...
Click to collapse
Had good luck with this one.
GSM/CDMA Unlock for SCH-I545L
Hi,
I just bought a SCH-I545L over ebay and the seller said its Verizon but it turned out to be Other local carrier phone probably Cell Com. Verizon Phones are GSM Factory unlocked and hence I wanted to buy the same but this is not working with International GSM Service providers.
I basically want to use the phone outside of the USA on GSM and CDMA network.
I would like to know anyone here can guide me to a post or thread where there is a GSM/CDMA unlock available for SCH-I545L.
The other problem which I am facing is that I am not able to enable hidden menu. Dont know how to enable the hidden menu. Have already checked out various posts saying to take a backup followed by changing /efs/carrier/HiddenMenu. Change OFF to ON. Did the same but thats not working for me. *#06# doesn't work.
I was however able to root the phone through Towelroot. I am currently on 4.4.2 NC5.
Any guidance in the matter would be highly appreciated.
Thanks

[Q] How screwed am I?

Im stuck at boot loader, someone please help!!
Ive got a verizon SCH-i545 running NC5. I did towel root, got root access no problem. I then installed ROM manager and did install recovery. This seemed to work too. Then after installing that, I saw something about safestrap and decided to install that too. So I installed BusyBox and then safestrap and I could boot into safestrap no problem, made a backup of my device and then wiped everything (/data dalvik&system) After that my phone rebooted and went into CWM recovery, i didn't think anything of it and I tried flashing the latest nightly CM11 build (cm-11-20140821-NIGHTLY-jflte.zip) but when I try this it gives me:
E:could not verify whole-file signature
E:signature verification failed
In red and then continues and tries to reboot, but when it does it just gets frozen at the Samsung loading screen. Ive tried a few different CM builds but they all do the same.
Is there a way to disable signature verification? Am I just using the wrong build? Should I try different a different ROM (if so suggestions)?
Thanks and hopefully i didn't permanently brick my phone...
Swigster said:
Im stuck at boot loader, someone please help!!
Ive got a verizon SCH-i545 running NC5. I did towel root, got root access no problem. I then installed ROM manager and did install recovery. This seemed to work too. Then after installing that, I saw something about safestrap and decided to install that too. So I installed BusyBox and then safestrap and I could boot into safestrap no problem, made a backup of my device and then wiped everything (/data dalvik&system) After that my phone rebooted and went into CWM recovery, i didn't think anything of it and I tried flashing the latest nightly CM11 build (cm-11-20140821-NIGHTLY-jflte.zip) but when I try this it gives me:
E:could not verify whole-file signature
E:signature verification failed
In red and then continues and tries to reboot, but when it does it just gets frozen at the Samsung loading screen. Ive tried a few different CM builds but they all do the same.
Is there a way to disable signature verification? Am I just using the wrong build? Should I try different a different ROM (if so suggestions)?
Thanks and hopefully i didn't permanently brick my phone...
Click to expand...
Click to collapse
Ok - bad news - you are screwed! Unless you are on MDK bootloader, you are limited to root, safestrap and a TW-based ROM like Eclipse. No CM! Some people have had some success with an AOSP rom but stick with TW based ones.
Do a factory reset and try flashing a stock build.
Then reroot, load safe strap as before and your TW based rom.
zeb carter said:
Ok - bad news - you are screwed! Unless you are on MDK bootloader, you are limited to root, safestrap and a TW-based ROM like Eclipse. No CM! Some people have had some success with an AOSP rom but stick with TW based ones.
Do a factory reset and try flashing a stock build.
Then reroot, load safe strap as before and your TW based rom.
Click to expand...
Click to collapse
Darn, thanks I was going to try and find a stock ROM and see if that works. Any idea where I can find one?
Also what do you mean when you say TW based ROMS? Is there a way I can get an MDK bootloader?
Swigster said:
Darn, thanks I was going to try and find a stock ROM and see if that works. Any idea where I can find one?
Also what do you mean when you say TW based ROMS? Is there a way I can get an MDK bootloader?
Click to expand...
Click to collapse
How much was your phone?
Do some reading because your going to brick it.
You can use safestrap with roms based on your current kernel version, you can flash roms but cannot change your kernel, so the rom must use the stock kernel. Read threads on safestrap, as well as your current firmware version.
http://forum.xda-developers.com/showthread.php?t=2735172
Do that, root your phone, then read into SafeStrap.
Whoop5 said:
http://forum.xda-developers.com/showthread.php?t=2735172
Do that, root your phone, then read into SafeStrap.
Click to expand...
Click to collapse
Thanks, this is what I have been trying to do but I cant get a valid .md5 file, tried the one from this thread: http://forum.xda-developers.com/showthread.php?t=2484726 but I just cant extract it. Will try this one and hopefully it extracts and I can just get my phone back to stock
Our S4 has a locked bootloader, so you can't just flash whatever you so please. The safest route is to flash a stock NC5 image since that's what you're running. Either the downloads aren't finishing, or your internet is nuts fast (and thus I envy you.)
Whoop5 said:
Our S4 has a locked bootloader, so you can't just flash whatever you so please. The safest route is to flash a stock NC5 image since that's what you're running. Either the downloads aren't finishing, or your internet is nuts fast (and thus I envy you.)
Click to expand...
Click to collapse
So I finally got that file downloaded and extracted but when I load it into Odin after clicking the PDA button it says MD5 hash value is invalid. What does that mean and how do i fix this??
What version of odin are you using? Also which tar file are you using? If you're on kitkat you NEED to use the NC5 tar file that Whoop5 posted. If you use any of the ones that you posted you have a chance of bricking your phone. you should probably use the full wipe stock image. You're going to need the samsung jfltevzw 16g.pit file
You should be able to find the pit file in Surge123's post that Whoop5 has posted here. I can post a odin 3.10 if you need it.

[ODIN][TAR] I545VRUGOC1 Factory Image

Warning: VRUGOC1 is impervious to previous bootloader bypass methods, and cannot be downgraded. Proceed with caution.
I managed to hose my phone while rooting it somehow, so I had to track down the factory image for I545VRUGOC1 / I545VZWGOC1. To actually flash it, I had to use Odin 3.10.6 rather than 3.09 for some reason, which is available in the links below. I also replaced Odin's SS_DL.dll with the one from the zip that contains the tar file, but I'm not sure if that was necessary.
Hope this helps anyone else from who's stuck
TAR
https://mega.nz/#!T0tTDZKA!tIw4ebWEWhsTJWTbyWVx9e07aSBSc_1_Xm2mWWkdu8I
Mirror: http://upple.it/4b1331ec4f4dd04e/VZW-I545VRUGOC1-20150502144520.zip
Slower / crappier mirrors I found in case the above doesn't work:
http://rapidgator.net/file/6f4fd8106796c1bba92dd20a7b5a5c51
http://uploaded.net/file/zcbqwyz5
Odin
http://odindownload.com/download/Odin3_v3.10.6.zip
Mirror: https://mega.nz/#!qh9UTJ6Q!gLDkj2xwXRb8Wa2YTbPODpdrhqowK-s6eZjXI_bTrhQ
kd- said:
Warning: VRUGOC1 is impervious to previous bootloader bypass methods. Proceed with caution.
Click to expand...
Click to collapse
Thanks! I found the file here too:
http://d-h.st/LNQV
My question is, I have a Kitkat Verizon phone here, I assume upgrading it restricts custom ROMs that can be loaded to it?
Thanks for another mirror - the more the better
Yes, I don't think any current custom ROMs work with the VRUGOC1 bootloader, etc. FlashFire has worked for a couple experiments I've run (flashing wireless hotspot fix, for example), but I'm hesitant to flash anything more substantial. I have not tried SafeStrap but I have not seen anything about it working yet.
kd- said:
Thanks for another mirror - the more the better
Yes, I don't think any current custom ROMs work with the VRUGOC1 bootloader, etc. FlashFire has worked for a couple experiments I've run (flashing wireless hotspot fix, for example), but I'm hesitant to flash anything more substantial. I have not tried SafeStrap but I have not seen anything about it working yet.
Click to expand...
Click to collapse
muniz_ri has posted a stock, de-odexed (and odexed, too of course) that should work with OC1 bootloader (it doesn't have a bootloader in it, so the current bootloader should stay)
http://forum.xda-developers.com/gal...ment/rom-i545oc1-5-0-1-100-stock-mdk-t3097902
I haven't installed flashfire yet, but i am on OC1 and already went through the rooting process.
Does this boot if I flash it and the NK4 bootloader?
Oishikatta said:
Does this boot if I flash it and the NK4 bootloader?
Click to expand...
Click to collapse
muniz_ri has a tar with the oc1 build and the nk4 bootloader, look in either general or Android development
^^
It's in android development. Only two or three ROMs work on OC1(at most). I only know of one confirmed.
XxD34THxX said:
^^
It's in android development. Only two or three ROMs work on OC1(at most). I only know of one confirmed.
Click to expand...
Click to collapse
muniz has a stock rooted ROM for the oc1 people, which makes sense if you're going from stock. you can flash deodexed ROM and be able to use xposed framework
skepticmisfit said:
muniz has a stock rooted ROM for the oc1 people, which makes sense if you're going from stock. you can flash deodexed ROM and be able to use xposed framework
Click to expand...
Click to collapse
Yep, it works just fine, flashed with FlashFire.
https://docs.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/edit?usp=docslist_api&pli=1 I found it here two
Can somebody please help me? First, my phone is locked and I was in NK1, so I decided to flash OC1 by the flashfire method (I don't remember who's the author of the topic), everything went fine and I started to use lollipop, but then I was about to sell my phone and I went to settings, then factory reset and the phone restarted, wiped data and cache by itself and then turned on, I thought everything was ok, but then it just stayed in the samsung's wizard screen, it never passed from that screen. So, I decided to manually enter recovery and do a factory reset again, but the result was the same. In order to unbrick the phone I had to use odin and install the NC5 original firmware .
So, my question is, If I want to install lollipop and I don't care to stay with an unlockable bootloader I justt need to use this Firmware and install it through odin? Or do I need to have an specific firmware (e.g nc5, nk1) and unlocked bootloader?
bayron_olaff said:
Can somebody please help me? First, my phone is locked and I was in NK1, so I decided to flash OC1 by the flashfire method (I don't remember who's the author of the topic), everything went fine and I started to use lollipop, but then I was about to sell my phone and I went to settings, then factory reset and the phone restarted, wiped data and cache by itself and then turned on, I thought everything was ok, but then it just stayed in the samsung's wizard screen, it never passed from that screen. So, I decided to manually enter recovery and do a factory reset again, but the result was the same. In order to unbrick the phone I had to use odin and install the NC5 original firmware .
So, my question is, If I want to install lollipop and I don't care to stay with an unlockable bootloader I justt need to use this Firmware and install it through odin? Or do I need to have an specific firmware (e.g nc5, nk1) and unlocked bootloader?
Click to expand...
Click to collapse
Yes, that sounds correct. Personally, I wouldn't flash the OC1 factory image unless you have to - I'd flash the NK1 image, which should reset everything, then upgrade to Lollipop using a method that doesn't upgrade the bootloader so whoever gets the phone next can downgrade if they want to.
Can anyone confirm the mega link is a no-wipe oc1 package?
persdata.img doesnt appear in it just making sure.
Edit : been tested it appears to be a no wipe Odin package

[Q] Easiest Path - Upgrade MK2 to OF1 ?

Hello Everyone,
I'm a first time poster but have been reading this site for weeks trying to find the answer to my questions. I've acquired a good bit of info but still wanted to clarify some things before I take the plunge.
I'm currently using a Verizon GS4 (I-545) running rooted stock MK2 jellybean. I rooted ~2 years ago to get rid of the bloatware and just never bothered upgrading/keeping up with the firmware updates. There are some new apps that won't work on my phone, but are working on my wife's stock GS4 on OF1. I'd like to upgrade my firmware (and keep root) so that I don't have to keep stealing her phone.
I've come across several threads discussing upgrading from one baseband to the next - none quite match my scenario. Most threads talk about how to upgrade and keep root but now that I'm late to the party, it seems like root methods have been discovered for all stock firmware versions (even OF1 by flashing OC1 kernel, rooting, and flashing back to OF1 kernel). So with this in mind, can I just skip all the complicated stuff and just use Odin to flash OF1 and then follow Edgardo_Uchicha's OF1 root method?
If I can use Odin to flash OF1, will the file I load in the "AP" slot also includes the proper modules, bootloaders, etc. to upgrade everything to OF1? Will it do a factory reset/wipe or will I keep all my data like an OTA? As for getting the Odin file, it looks like I should just use the Samsung site to get it directly?
If I can use the Odin method, are there any drawbacks? If I don't like lollipop I realize I'm stuck and can't go back, but is there anyway to upgrade and be able to go back (downgrade)?
Thanks again for your help!
Mike
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Edgardo_Uchiha said:
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Click to expand...
Click to collapse
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
mike2914 said:
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
Click to expand...
Click to collapse
Try wiping via recovery, if I'm not wrong this package does not wipe your phone so maybe there are some leftovers that are messing up the new system
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
mike2914 said:
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
Click to expand...
Click to collapse
Download and install terminal emulator, the run these commands:
1. su
2. getprop ro.bootloader
Awesome! I was able to confirm I'm still using the MK2 bootloader. Thanks for all your help!

Flashing question for my Sprint Note 3

I'm currently rooted on 4.3 MJ4. Yes I'm outdated and decided to finally update. I'm going to flash to stock 4.3 MJ4. My questions is, after I flash to stock 4.3 MJ4. Can I flash NC5 from MJ4? Or would I have to do it in these steps ( MJ4 then NAB then NC5? ).
Why not PH1? If you're wanting to stay with KK, NK4 is the last I believe. NH7 is the one most people used. Just trying to find out what you're trying to achieve
Also, if you're flashing a stock ROM, you don't need to first flash MJ4. Just flash what you want.
evilvoice said:
Why not PH1? If you're wanting to stay with KK, NK4 is the last I believe. NH7 is the one most people used. Just trying to find out what you're trying to achieve
Also, if you're flashing a stock ROM, you don't need to first flash MJ4. Just flash what you want.
Click to expand...
Click to collapse
Awesome! Thanks! I am trying to flash a stock rom, but thought I would need to go in steps instead of instantly flashing to the most current version.
As for my plan: I'm rooted and on a custom rom. I want to go back to stock rom and then root again and flash to either cm12.1 or cm13. From what I've read, I cant flash to either cyanogenmod roms until I was on either lollipop or higher. I was also thinking, would it work if I was to flash a rooted current version of a stock rom, that way I don't have to flash a stock rom and break root and have to root it again?
For better results, I would flash a full PH1 rom and root, then install whatever rom you want. Usually they want the bootloader to be upgraded to lollipop and that really only happens when either flashing a full Odin rom or a bootloader image. Doing only the bootloader doesn't upgrade anything else and may cause issues.
evilvoice said:
For better results, I would flash a full PH1 rom and root, then install whatever rom you want. Usually they want the bootloader to be upgraded to lollipop and that really only happens when either flashing a full Odin rom or a bootloader image. Doing only the bootloader doesn't upgrade anything else and may cause issues.
Click to expand...
Click to collapse
What is the PH1 rom? I've already flashed to stock NC5 so far and lost root.
It's the latest rom. I don't think an Odin has been posted, but you can grab from the Samsung firmware site. Load that, then root by flashing TWRP and boot into recovery and flash SuperSU. Done.
evilvoice said:
It's the latest rom. I don't think an Odin has been posted, but you can grab from the Samsung firmware site. Load that, then root by flashing TWRP and boot into recovery and flash SuperSU. Done.
Click to expand...
Click to collapse
EDIT: I went ahead and used the Full Restore. Fortunately, it did not WIPE any data. YEAH! And it looks like I am on my way to an updated NOTE3.
Hello. My Note3 is on 4.3. It was rooted a couple of years ago, but out of use since Oct 2015. I still want to use the Note3 for non-cell phone operations, browsing, camera, etc. I want to upgrade, but the OTA is locked out.
I am lost on all of the many, many posts on how to updated a rooted Note3, but most of them are outdated. I have it mostly backed up as far as handwritten notes, photos, etc. But I don't really want to have to start from scratch if I don't have to.
I am currently reviewing rwilco's one click options. There are two software packages listed in his directory. One of them is dated 02/27/15 and is called nodata restore. Will this keep from wiping the phone as opposed to the fullrestore exe posted 04/12/14 vs the tar posted 02/27/15.
I am not a complete dodo, but I am having a hard time getting this phone unrooted and updated.
Thanks for any detail instructions or links to the best way to update this as of 9/5/2016!!!
Everything you need to know is explained here. http://forum.xda-developers.com/galaxy-note-3/general/guide-how-to-disable-air-command-pop-t2960839
Sent from my SM-N920C using XDA-Developers mobile app

Categories

Resources