I recently joined android with the s6 edge. I set up the fingerprint scanner password but it ONLY asks fo it when my device has been cut on, or has been locked for a while. when i lock my phone and and hit the home button it says swipe to unlock. how can I get it to where it immediately asked for my fingerprint every single time I want to unlock my phone? Everyones ive seen already does it.
Go to lock & Security in settings and then secure lock settings and make sure its set to lock immediately with power key
Related
Hi
I want to extend the timeout for security lock screen.
From 10 min to maybe 10 hours.
I use password on lockscreen and don't want to type in the password
many times a day.
I just try "Delayed lock" , but it don't work on my SGS 2 with android 2.3.5
Any other programs that can extend the timeout ??
Or can I do some change in a system file to extend it ?
I'm interested in this too. I am getting fed up with having to type a password after every time my screen switches off (which is currently set to 1min to save battery). Ideally I would like to have a setting for the screen to turn off and a separate setting to enforce the lock, e.g. screen turns off after 1min but does not lock until maybe 10mins (or what ever the user sets) later.
Super Cool !! I solved the problem myself today !!
Now screenlock is not get active, even with password enabled.
The solution on the Samsung Galaxy S II
Install app "SGS Secret Code"
Start the app and select "Power Button Settings"
Mark "Shutdown"
That's all.
Can you clarify what the app really did?
First the "SGS secret code" app doesn't exist. There is "SGS secret codes". Is that the app you used? This just provides short cuts to entering special codes via the dialler.
Have you permanently disabled the lock screen asking for a password / code? I don't understand how it works from your brief description.
Yes. it's "SGS secret codes"
It's disable the screenlock. The screen will never get lock. Even with password or pattern installed for the screenlock.
The screenlock will never get activ. If the screen are turn-off and you push the home
button, the screen just turn-on, with no asking for password or pattern.
Thanks for clarifying but maybe I'm missing something here.
So basically this circumvents the screen lock password / code. Why not just disable the screenlock password / code from the settings?
The point of having the password if for security so I'm not entirely comfortable with disabling it altogether. I just want the time-out for the actual password lock to be independently configurable from the screen time-out. So for example screen shuts off after one minute but the lock doesn't actually lock for another 10 mins.
I understand you asking about this.
The reason is that I use a program that requires is a screenlock with a minimum of 8 characters with both numbers and letters.
Every time I start this program, it go out and see if there is activated a screenlock
with 8 character, otherwise program does not start.
This way I keep the safety screenlock, but it will just never be activated.
OK I see. Unfortunately your solution doesn't help me. Oh well I'll keep looking...
I've got cyanogenmod 12.1 with android 5.1.2. Normally I use a PIN to unlock my phone but when I'm at home I'd like to just use my face. This doesn't work because I can't get the option for faceunlock.
In Settings -> Lock screen -> Smart lock, trusted faces is on
but in 'choose lock screen', it's not there
and 'Smart lock (Google)' is enabled
Questions:
How do I get faceunlock to work?
How can I use a PIN, except when I'm at home when I want to use faceunlock? I tried setting up trusted places but it didn't work.
imgoingtowin said:
I've got cyanogenmod 12.1 with android 5.1.2. Normally I use a PIN to unlock my phone but when I'm at home I'd like to just use my face. This doesn't work because I can't get the option for faceunlock.
In Settings -> Lock screen -> Smart lock, trusted faces is on
but in 'choose lock screen', it's not there
and 'Smart lock (Google)' is enabled
Questions:
How do I get faceunlock to work?
How can I use a PIN, except when I'm at home when I want to use faceunlock? I tried setting up trusted places but it didn't work.
Click to expand...
Click to collapse
Face unlock is a part of smart lock. Since it's not as secure as pin or password Face unlock (and other unlock methods like trusted place) should be used with a pin or password.
If face unlock is switched on under smart lock and configured. That's mean it's working. To confirm it's working lock with the power button and unlock. Then at the bottom instead of a padlock symbol you will see a small face icon. That means the camera is on and searching for your face.
http://androidwidgetcenter.com/android-tips/enable-face-unlock-android-5-0-lollipop/
Smart unlock methods stops working if u lock your phone using 3rd party apps. Instead of the lock button.
IreshS said:
Face unlock is a part of smart lock. Since it's not as secure as pin or password Face unlock (and other unlock methods like trusted place) should be used with a pin or password.
If face unlock is switched on under smart lock and configured. That's mean it's working. To confirm it's working lock with the power button and unlock. Then at the bottom instead of a padlock symbol you will see a small face icon. That means the camera is on and searching for your face.
http://androidwidgetcenter.com/android-tips/enable-face-unlock-android-5-0-lollipop/
Smart unlock methods stops working if u lock your phone using 3rd party apps. Instead of the lock button.
Click to expand...
Click to collapse
You're linked to instructions didn't work.
Link worked for me. As explained face lock is now an additional unlock method, you need set a primary one first (pin, pattern, password). Then you can select to use trusted face. I have a pattern lock but if the phone recognises my face when I wake it I can just slide to unlock without enter pattern as it recognises me.
When I first received my phone, I set up fingerprint unlocking. Yesterday, I decided to change it to password, which I set as a 4-word string with spaces. Something akin to "bleep bloop ima robot". I can unlock the screen successfully with the password.
Now, I want to go back to fingerprint unlocking. When I go to Settings > Lock screen and security > Screen lock type, I press that option, and it prompts me to Enter the current password. I put the password in, and says Try again. I have tried many, many times now with the very same password that unlocks the screen, and it still won't let me change it.
This is on a Verizon Galaxy S6 Edge+, running Lollipop 5.1.1.
Hy.
Some time ago I enabled the autolock feature and since i didn't use it for a while i forgot the pattern
Anyways, i have access to both the watch and the phone and i would like to remove or change the lock pattern but it keeps asking for the old pattern (which i forgot).
So, is there any way to remove the pattern set in Samsung Gear app on the phone ? (under Settings->Auto lock).
Thanks in advance.
P.S. as long as the watch is near the phone i can access the phone without problems, hopefully i don't have to do a factory reset on the phone. Also, the phone is a Note 3 if it matters.
After many trials and errors i managed to remove the lock.
The trick was to get to the Android Device Manager page ( https://www.google.com/android/devicemanager ) and lock the device, this overrides the smart lock set by Samsung Gear. After unlocking the device with the new lock i was able to modify the locking pattern by going to Settings -> Device->Lock Screen->Screen Lock
Note, to use the AutoLock feature you have to set the screen lock to be "Auto lock" option.
So, as long as you can access your device through Android Device Manager you can reset the lock pattern.
I'm hoping this is an easy settings fix. I've searched online and in settings without success.
I have a pattern screenlock and use smart unlock. If the phone is in an unlocked state (because of smart unlock or a recent unlock) and I open the dual screen, it still shows a lock screen that I have to swipe away. Is there any setting (other than removing a lock altogether) that would enable activity as soon as I open the dual-screen, without having to swipe away the lock screen?
Thanks in advance.
Have you tried the Smart Lock options?
You can keep it unlocked while you have certain devices connected like a smartwatch or wifi signal.
Thanks! I actually am using smart lock. The device is unlocked, but I still have to swipe the lockscreen away, although I don't have to enter my pattern. I was hoping there would be a away to simply open the cover and, if it is already smart unlocked, that it would just pick up where I left off instead of having to swipe first.