I have a Samsung S3 mini, which I flashed with Kit Kat Cyanogenmod 11.0 from novafusion.pl
Everything in the installation was OK.
However my phone randomly falls "sleep" and cannot recieve msgs or calls. I have to turned Airplane mode on and off, to give it a "shake" and "wake" it up.
These is a report from Logcat, plus the log from yesterday,
Code:
build.board: montblanc
build.bootloader: unknown
build.brand: samsung
build.cpu_abi: armeabi-v7a
build.cpu_abi2: armeabi
build.device: golden
build.display: cm_golden-userdebug 4.4.4 KTU84Q d39c1e8ca0 test-keys
build.fingerprint: samsung/cm_golden/golden:4.4.4/KTU84Q/d39c1e8ca0:userdebug/test-keys
build.hardware: samsunggolden
build.host: novafusion.pl
build.id: KTU84Q
build.manufacturer: samsung
build.model: GT-I8190
build.product: cm_golden
build.radio: unknown
build.serial: 47900592d6cb30c0
build.tags: test-keys
build.time: 1436279173000
build.type: userdebug
build.user: root
version.codename: REL
version.incremental: d39c1e8ca0
version.release: 4.4.4
version.sdk_int: 19
I can't attach my full log because I'm new on the forum.
This is the top 30 unique lines processed by me in Bash,
Code:
[email protected]:~/Dropbox# cat 2015-07-28-10-25-50.txt | grep " E/" | cut -d "/" -f 2- | sort | uniq -c | sort -rn | head -n 30
166 Drm ( 1669): Failed to open plugin directory /vendor/lib/mediadrm
144 SpannableStringBuilder( 4288): SPAN_EXCLUSIVE_EXCLUSIVE spans cannot have a zero length
118 ActivityThread( 2565): Failed to find provider info for com.google.android.wearable.settings
87 AuthorizationBluetoothService( 2483): Proximity feature is not enabled.
85 ConnectivityService( 2088): Can't set delayed ACK size:java.io.FileNotFoundException: /sys/kernel/ipv4/tcp_use_userconfig: open failed: ENOENT (No such file or directory)
85 ConnectivityService( 2088): Can't set delayed ACK size:java.io.FileNotFoundException: /sys/kernel/ipv4/tcp_delack_seg: open failed: ENOENT (No such file or directory)
70 audio_a2dp_hw( 1669): adev_set_parameters: ERROR: set param called even when stream out is null
59 WifiNative-wlan0( 2088): doBoolean: disable
57 WifiNative-wlan0( 2088): doBoolean: enable
49 CallDetails( 2409): list is null in setConfUriList
48 ActivityThread(14438): Failed to find provider info for com.google.android.wearable.settings
31 MDM ( 2388): [64] b.run: Couldn't connect to Google API client: ConnectionResult{statusCode=API_UNAVAILABLE, resolution=null}
31 BluetoothPhoneService( 2409): Could not get a handle on Connection object for the call
30 MDM ( 2388): [89] b.run: Couldn't connect to Google API client: ConnectionResult{statusCode=API_UNAVAILABLE, resolution=null}
26 MDM ( 2388): [67] b.run: Couldn't connect to Google API client: ConnectionResult{statusCode=API_UNAVAILABLE, resolution=null}
25 LocationReceiver( 6879): Received bad location: null
17 ENSWrapper( 1673): return OMX_ErrorNotImplemented - GetExtensionIndex OMX.ST.AFM.pcmprocessing.spl h=0x414b3f80 cParameterName=STE.ADM IndexType=unknown OMX_INDEXTYPE [ 0x4d2efb3e ]
16 SpannableStringBuilder(25691): SPAN_EXCLUSIVE_EXCLUSIVE spans cannot have a zero length
15 YSNP_TAG( 5072): [NetworkHelper] : [thread:1]checkNetworkChange() - no active network!
14 bp ( 2374): onStartInput event aborted: com.touchtype.keyboard.c.ag: could not obtain extracted text (class com.touchtype.keyboard.c.ag)
13 ENSWrapper( 1673): return OMX_ErrorNotImplemented - GetExtensionIndex OMX.ST.AFM.pcmprocessing.spl h=0x411acd98 cParameterName=STE.ADM IndexType=unknown OMX_INDEXTYPE [ 0x4d2efb3e ]
11 ENSWrapper( 1673): return OMX_ErrorNotImplemented - GetExtensionIndex OMX.ST.AFM.pcmprocessing.spl h=0x4161b3a0 cParameterName=STE.ADM IndexType=unknown OMX_INDEXTYPE [ 0x4d2efb3e ]
9 ENSWrapper( 1673): return OMX_ErrorUnsupportedIndex - SetConfig OMX.ST.AFM.speech_proc h=0x419f8f40
9 ENSWrapper( 1673): return OMX_ErrorUnsupportedIndex - SetConfig OMX.ST.AFM.speech_proc h=0x416a0f08
9 ENSWrapper( 1673): return OMX_ErrorUnsupportedIndex - SetConfig OMX.ST.AFM.speech_proc h=0x41490f68
9 ENSWrapper( 1673): return OMX_ErrorUnsupportedIndex - SetConfig OMX.ST.AFM.speech_proc h=0x412c9f58
9 ENSWrapper( 1673): return OMX_ErrorUnsupportedIndex - SetConfig OMX.ST.AFM.speech_proc h=0x412c8f48
8 VFM ( 1669): ! getSupportedVideoSettings RETURN_XXX_IF_WRONG, condition=(index<mNbVideoSettingsSupported[nPortIndex]), error=-2147479538(0x8000100e)(OMX_ErrorNoMore) /home/se.infra/jenkins1/workspace/HUDSON_GA_JELLYBEAN_GOLDEN_EUROPEN-PROD-XX/android/vendor/st-ericsson/variant/multimedia/video/vfm/src/VFM_Component.cpp:407
8 VFM ( 1669): ! getSupportedProfileLevel RETURN_XXX_IF_WRONG, condition=(index<mNbProfileLevelSupported), error=-2147479538(0x8000100e)(OMX_ErrorNoMore) /home/se.infra/jenkins1/workspace/HUDSON_GA_JELLYBEAN_GOLDEN_EUROPEN-PROD-XX/android/vendor/st-ericsson/variant/multimedia/video/vfm/src/VFM_Component.cpp:379
8 VFM ( 1669): ! getParameter RETURN_OMX_ERROR_IF_ERROR, condition=pParam->getIndexParamVideoProfileLevelQuerySupported(pt), error=-2147479538(0x8000100e)(_error) /home/se.infra/jenkins1/workspace/HUDSON_GA_JELLYBEAN_GOLDEN_EUROPEN-PROD-XX/android/vendor/st-ericsson/variant/multimedia/video/vfm/src/VFM_Component.cpp:140
carlosalomar said:
I have a Samsung S3 mini, which I flashed with Kit Kat Cyanogenmod 11.0 from novafusion.pl
Everything in the installation was OK.
However my phone randomly falls "sleep" and cannot recieve msgs or calls. I have to turned Airplane mode on and off, to give it a "shake" and "wake" it up.
These is a report from Logcat, plus the log from yesterday,
I can't attach my full log because I'm new on the forum.
This is the top 30 unique lines processed by me in Bash
Click to expand...
Click to collapse
Hi, you might get better results asking in your specific device help forum.
http://forum.xda-developers.com/galaxy-s3-mini/help
Good luck!
Related
Hi all !
I see that project :
http://code.google.com/p/android-vnc-server/
I wan't to compile it on my PC for including the vnc server into my furture APK.
I have compiled it but the vnc client have a real bad image (See attachment)
There is the logs :
Code:
/ # androidvncserver
Initializing framebuffer device /dev/graphics/fb0...
xres=480, yres=800, xresv=480, yresv=1600, xoffs=0, yoffs=0, bpp=32
Initializing keyboard device /dev/input/event3 ...
Initializing touch device /dev/input/event1 ...
Initializing VNC server:
width: 480
height: 800
bpp: 32
port: 5901
Initializing server...
28/09/2011 14:13:44 Listening for VNC connections on TCP port 5901
# I just connect with an VNC Client
28/09/2011 14:14:13 Got connection from client 192.168.70.138
28/09/2011 14:14:13 other clients:
28/09/2011 14:14:13 Client Protocol Version 3.8
28/09/2011 14:14:13 Protocol version sent 3.8, using 3.8
Dirty page: 480x800+0+0...
28/09/2011 14:14:13 rfbProcessClientSecurityType: executing handler for type 1
28/09/2011 14:14:13 rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8
28/09/2011 14:14:13 Pixel format for client 192.168.70.138:
28/09/2011 14:14:13 8 bpp, depth 6
28/09/2011 14:14:13 true colour: max r 3 g 3 b 3, shift r 4 g 2 b 0
28/09/2011 14:14:13 Enabling full-color cursor updates for client 192.168.70.138
28/09/2011 14:14:13 Enabling NewFBSize protocol extension for client 192.168.70.138
28/09/2011 14:14:13 Using ZRLE encoding for client 192.168.70.138
28/09/2011 14:14:14 Pixel format for client 192.168.70.138:
28/09/2011 14:14:14 32 bpp, depth 24, little endian
28/09/2011 14:14:14 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0
28/09/2011 14:14:14 Enabling full-color cursor updates for client 192.168.70.138
28/09/2011 14:14:14 Enabling NewFBSize protocol extension for client 192.168.70.138
28/09/2011 14:14:14 Switching from ZRLE to hextile Encoding for client 192.168.70.138
# I disconnect the VNC Client.
28/09/2011 14:14:51 Client 192.168.70.138 gone
28/09/2011 14:14:51 Statistics events Transmit/ RawEquiv ( saved)
28/09/2011 14:14:51 FramebufferUpdate : 2 | 0/ 0 ( 0.0%)
28/09/2011 14:14:51 hextile : 1 | 1351415/ 1536012 ( 12.0%)
28/09/2011 14:14:51 ZRLE : 1 | 15792/ 384000 ( 95.9%)
28/09/2011 14:14:51 RichCursor : 2 | 342/ 342 ( 0.0%)
28/09/2011 14:14:51 TOTALS : 6 | 1367549/ 1920354 ( 28.8%)
28/09/2011 14:14:51 Statistics events Received/ RawEquiv ( saved)
28/09/2011 14:14:51 ClientCutText : 1 | 32/ 32 ( 0.0%)
28/09/2011 14:14:51 PointerEvent : 285 | 1710/ 1710 ( 0.0%)
28/09/2011 14:14:51 FramebufferUpdate : 3 | 30/ 30 ( 0.0%)
28/09/2011 14:14:51 SetEncodings : 2 | 64/ 64 ( 0.0%)
28/09/2011 14:14:51 SetPixelFormat : 2 | 40/ 40 ( 0.0%)
28/09/2011 14:14:51 TOTALS : 293 | 1876/ 1876 ( 0.0%)
Do you know why my screen is "green" and "entralaced" ?
With other binarie of vncserver in android, with the same client, the image is good.
Thanks for help !
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hello,
I've compiled the latest version of libmtp (1.1.2) and installed properly. It seems that the device is recognized but still without the ability to connect to it. Here is the log. I got two different outputs. So I'll post both of them:
1.
Code:
libmtp version: 1.1.2
Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus.
Found 1 device(s):
Samsung: GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus (04e8:6860) @ bus 1, dev 12
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
inep: usb_get_endpoint_status(): No such device
outep: usb_get_endpoint_status(): No such device
usb_clear_halt() on IN endpoint: No such device
usb_clear_halt() on OUT endpoint: No such device
usb_clear_halt() on INTERRUPT endpoint: No such device
ignoring usb_claim_interface = -9ignoring usb_claim_interface = -22LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.
2.
Code:
libmtp version: 1.1.2
Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus.
Found 1 device(s):
Samsung: GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus (04e8:6860) @ bus 1, dev 13
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.
I've read about a samsung-proprietary mtp protocol which would not work with libmtp. I hope those rumors are wrong, aren't they?
I'd really appreciate any help. I've been working on it for a couple of days and it starts really anoying me.
regards, hornby
I have the same issue. I am trying to connect my Linux Mint Debian machine to my SGS2 running CM9 nightly. Debian can see the device but communication is a nogo.
Here is mtp-detect:
Code:
~ $ mtp-detect
libmtp version: 1.1.2
Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus.
Found 1 device(s):
Samsung: GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus (04e8:6860) @ bus 1, dev 9
Attempting to connect device(s)
ignoring usb_claim_interface = -110Android device detected, assigning default bug flags
USB low-level info:
Using kernel interface "usbfs"
bcdUSB: 512
bDeviceClass: 0
bDeviceSubClass: 0
bDeviceProtocol: 0
idVendor: 04e8
idProduct: 6860
IN endpoint maxpacket: 512 bytes
OUT endpoint maxpacket: 512 bytes
Raw device info:
Bus location: 1
Device number: 9
Device entry info:
Vendor: Samsung
Vendor id: 0x04e8
Product: GT-P7510/Galaxy Tab 10.1/S2/GT-N7000/Galaxy Nexus
Vendor id: 0x6860
Device flags: 0x08008106
Device info:
Manufacturer: samsung
Model: GT-I9100
Device version: 1.0
Serial number: ????????
Vendor extension ID: 0x00000006
Vendor extension description: microsoft.com: 1.0; android.com: 1.0;
Detected object size: 64 bits
Extensions:
microsoft.com: 1.0
android.com: 1.0
Supported operations:
1001: get device info
1002: Open session
1003: Close session
1004: Get storage IDs
1005: Get storage info
1006: Get number of objects
1007: Get object handles
1008: Get object info
1009: Get object
100a: Get thumbnail
100b: Delete object
100c: Send object info
100d: Send object
1014: Get device property description
1015: Get device property value
1016: Set device property value
1017: Reset device property value
101b: Get partial object
9801: Get object properties supported
9802: Get object property description
9803: Get object property value
9804: Set object property value
9805: Get object property list
9810: Get object references
9811: Set object references
95c1: Unknown (95c1)
95c2: Unknown (95c2)
95c3: Unknown (95c3)
95c4: Unknown (95c4)
95c5: Unknown (95c5)
Events supported:
0x4002
0x4003
0x4004
0x4005
Device Properties Supported:
0xd401: Synchronization Partner
0xd402: Friendly Device Name
0x5003: Image Size
Playable File (Object) Types and Object Properties Supported:
3000: Undefined Type
3001: Association/Directory
3004: Text
3005: HTML
3008: MS Wave
3009: MP3
300b: MPEG
3801: JPEG
3802: TIFF EP
3807: GIF
3808: JFIF
380b: PNG
380d: TIFF
b901: WMA
b902: OGG
b903: AAC
b982: MP4
b983: MP2
b984: 3GP
ba05: Abstract Audio Video Playlist
ba10: WPL Playlist
ba11: M3U Playlist
ba14: PLS Playlist
ba82: XMLDocument
b906: FLAC
Storage Devices:
StorageID: 0x00010001
StorageType: 0x0003 fixed RAM storage
FilesystemType: 0x0002 generic hierarchical
AccessCapability: 0x0000 read/write
MaxCapacity: 12332314624
FreeSpaceInBytes: 6137163776
FreeSpaceInObjects: 1073741824
StorageDescription: Internal Storage
VolumeIdentifier: (null)
Special directories:
Default music folder: 0x0000001a
Default playlist folder: 0xffffffff
Default picture folder: 0x0000001f
Default video folder: 0xffffffff
Default organizer folder: 0xffffffff
Default zencast folder: 0xffffffff
Default album folder: 0xffffffff
Default text folder: 0xffffffff
MTP-specific device properties:
Friendly name: (NULL)
Synchronization partner: (NULL)
libmtp supported (playable) filetypes:
Folder
Text file
HTML file
RIFF WAVE file
ISO MPEG-1 Audio Layer 3
MPEG video stream
JPEG file
GIF bitmap file
JFIF file
Portable Network Graphics
TIFF bitmap file
Microsoft Windows Media Audio
Ogg container format
Advanced Audio Coding (AAC)/MPEG-2 Part 7/MPEG-4 Part 3
MPEG-4 Part 14 Container Format (Audio+Video Emphasis)
ISO MPEG-1 Audio Layer 2
Abstract Playlist file
XML file
Free Lossless Audio Codec (FLAC)
ERROR: Could not close session!
inep: usb_get_endpoint_status(): No such device
outep: usb_get_endpoint_status(): No such device
usb_clear_halt() on IN endpoint: No such device
usb_clear_halt() on OUT endpoint: No such device
usb_clear_halt() on INTERRUPT endpoint: No such device
OK.
Hi,
Internation Pardus v15 image on rooted i9300, works very well except for this really odd USB connection error when connecting it to my Sony BT3900u car stereo, it was previously connecting without issue on the v15 Pardus build but for unknown reasons to myself now always presents an error.
Does anyone have any ideas as to what might be causing this issue? Any help would be greatly appreciated.
After getting this issue the first time, I ran through a full rebuild, wiped phone/cache/dalvick and error still persisted post rebuild.
Model:
GT-i9300
Android Version:
4.2.2
Baseband
I9300XXEMA5
Kernel version:
3.0.31-702147
Build Number:
Pardus HD Rom XV XXUDME7
Logcat:
E/MTPRx ( 8982): Read Error Came false
E/ ( 8982): read error [0] [Success]
E/MTPRx ( 8982): state from USB_STATE eventDISCONNECTED
E/MTPRx ( 8982): /data/data/com.samsung.android.MtpApplication/gadgetDisconnectAndConnect.txt: open failed: ENOENT (No such file or directory)
E/MTPRx ( 8982): stop observing and calling usbRemoved
E/MTPRx ( 8982): In usbRemoved Status bar enabled
E/MTPRx ( 8982): Sending Broadcast
E/MtpService( 8982): onDestroy.
E/MtpService( 8982): Unregister Mtp disable Receiver
E/MtpService( 8982): Receiver not registered: [email protected]
E/MtpService( 8982): unregistering mtpMediaReceiver in UnregisterAllIntent
E/MtpService( 8982): Receiver not registered: [email protected]
E/MTPJNIInterface( 8982): noti = 3
E/ ( 8982): ****** [mtp_usb_mtp_finalize] mtp_close_fd Calling
E/ ( 8982): [mtp_close_fd] fd = 50...
E/ ( 8982): [mtp_close_fd] USB endpoint [50] closed...
E/ ( 8982): ****** [mtp_usb_mtp_finalize] Updating the gInitializeFlag Flag to FALSE
E/ ( 8982): ****** [mtp_usb_mtp_finalize] Calling mtp_stop_io
E/SEC PowerHAL( 2447): sysfs_write : Error opening /sys/class/input/input1/enabled: No such file or directory
E/SEC PowerHAL( 2447): sysfs_write : Error opening /sys/class/input/input8/enabled: No such file or directory
E/videowall-TranscodeReceiver(10572): broadcastMSG : android.intent.action.ACTION_POWER_DISCONNECTED
E/MTPRx (10600): In MtpReceiverandroid.hardware.usb.action.USB_STATE
E/MTPRx (10600): check value of boot_completed is1
E/MTPRx (10600): check booting is completed_sys.boot_completed
E/MTPRx (10600): Sd-Card path/storage/extSdCard
E/MTPRx (10600): Status for mount/Unmount :mounted
E/MTPRx (10600): SDcard is available
E/MTPRx (10600): The value of first_boot is 1
E/MTPRx (10600): [ 662] The value of first_boot is 1NORMAL SEQUENCE
E/MTPRx (10600): Received USB_STATE with sdCardLaunch = 0
E/MTPRx (10600): configured is false
I'm guessing this is the correct part of the log that pretains to the MTP/USB part. If not I have attached a full log.
Try typing this in a terminal window or adb shell on your phone:
Code:
touch /data/data/com.samsung.android.MtpApplication/gadgetDisconnectAndConnect.txt
Or, make a txt file called gadgetDisconnectAndConnect and place it in /data/data/com.samsung.android.MtpApplication folder.
xpmode said:
Try typing this in a terminal window or adb shell on your phone:
Code:
touch /data/data/com.samsung.android.MtpApplication/gadgetDisconnectAndConnect.txt
Or, make a txt file called gadgetDisconnectAndConnect and place it in /data/data/com.samsung.android.MtpApplication folder.
Click to expand...
Click to collapse
Hi, thanks for the reply.
I did that as quoted, nothing seems to have changed, What should I be looking for?
Thanks!
I have an Archos 80G9 250GB HDD version, in stock FW, now replaced with an Xperia tablet for my regular use. The Archos had low RAM and had started crying for help although it was good as a media device..The Android 4.4 release was mentioned as also suited for units with 512 MB RAM,, so I was wondering if anyone would be able to provide a build for good old Archos ? Clearly Archos has given up on it (and themselves I think) so can anyone throw some light on if we can resurrect this old tablet with Kit Kat?
4.4 (CM 11) was mentioned in the CM 10.2 thread. It will probably happen eventually. But I wouldn't get your hopes up that it might be faster. Google isn't lightening up their OS with each new revision, nor are the apps getting lighter. 512MB just isn't enough RAM for a quality experience.
Hi!
Currently I'm running some early alpha builds
Camera is working. HD Video also.
Sound, thanks to the adapted audio hal (also included in CM10.2) build is also working.
Thanks @Hashcode we have got a fixed rotation and screenshot functionality for our 4430/4460 processors which works really good =) (Without the known artifacts).
But there are some glitches (I have not tested everything) that I found out:
WLAN isn't working right. There are very much
Code:
E/wpa_supplicant( 1017): recvfrom(ctrl_iface): Try again
in the code. So it seems that this isn't working correctly. (Tough, connection is established and working but the blue WLAN icon is white).
The current bug (OOM) is at the easter egg screen, when tapping on the "android version" label on the settings page.
Code:
[0m[38;5;40mI/cat ( 609): <6>[ 99.693603] PVR_K: RA_Alloc FAILED : arena=PDSPixelCodeData, size=0xd000(0xd000), alignment=0x0, offset=0x0
[0m[38;5;40mI/cat ( 609): <6>[ 99.693756] PVR_K:
[0m[38;5;40mI/cat ( 609): <6>[ 99.693756] Command Line of the current process with ID 2749 is com.android.systemui:sweetsweetdesserts
[0m[38;5;40mI/cat ( 609): <6>[ 99.693939] PVR_K: Base Name of the current process with ID 2749 is com.android.systemui:sweetsweetdesserts
[0m[38;5;40mI/cat ( 609): <6>[ 99.694000] PVR_K: Arena 'PDSPixelCodeData':
[0m[38;5;40mI/cat ( 609): <6>[ 99.694122] PVR_K: allocCB=bf1b2240 freeCB= (null) handle=c9966840 quantum=4096
[0m[38;5;40mI/cat ( 609): <6>[ 99.694183] PVR_K: span count 1
[0m[38;5;40mI/cat ( 609): <6>[ 99.694274] PVR_K: live segment count 159
[0m[38;5;40mI/cat ( 609): <6>[ 99.694335] PVR_K: free segment count 4294967295
[0m[38;5;40mI/cat ( 609): <6>[ 99.694396] PVR_K: free resource count 0 (0x0)
[0m[38;5;40mI/cat ( 609): <6>[ 99.694519] PVR_K: total allocs 159
[0m[38;5;40mI/cat ( 609): <6>[ 99.694580] PVR_K: total failed allocs 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694702] PVR_K: total frees 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694763] PVR_K: import count 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694824] PVR_K: export count 0
I have no glue how to fix this error
Maybe other devs jumped in. We should wait a little bit until CM stabilizes. Currently there are so much code changes ongoing, it makes no sense to release a version.
Quallenauge said:
Hi!
Currently I'm running some early alpha builds
Camera is working. HD Video also.
Sound, thanks to the adapted audio hal (also included in CM10.2) build is also working.
Thanks @Hashcode we have got a fixed rotation and screenshot functionality for our 4430/4460 processors which works really good =) (Without the known artifacts).
But there are some glitches (I have not tested everything) that I found out:
WLAN isn't working right. There are very much
Code:
E/wpa_supplicant( 1017): recvfrom(ctrl_iface): Try again
in the code. So it seems that this isn't working correctly. (Tough, connection is established and working but the blue WLAN icon is white).
The current bug (OOM) is at the easter egg screen, when tapping on the "android version" label on the settings page.
Code:
[0m[38;5;40mI/cat ( 609): <6>[ 99.693603] PVR_K: RA_Alloc FAILED : arena=PDSPixelCodeData, size=0xd000(0xd000), alignment=0x0, offset=0x0
[0m[38;5;40mI/cat ( 609): <6>[ 99.693756] PVR_K:
[0m[38;5;40mI/cat ( 609): <6>[ 99.693756] Command Line of the current process with ID 2749 is com.android.systemui:sweetsweetdesserts
[0m[38;5;40mI/cat ( 609): <6>[ 99.693939] PVR_K: Base Name of the current process with ID 2749 is com.android.systemui:sweetsweetdesserts
[0m[38;5;40mI/cat ( 609): <6>[ 99.694000] PVR_K: Arena 'PDSPixelCodeData':
[0m[38;5;40mI/cat ( 609): <6>[ 99.694122] PVR_K: allocCB=bf1b2240 freeCB= (null) handle=c9966840 quantum=4096
[0m[38;5;40mI/cat ( 609): <6>[ 99.694183] PVR_K: span count 1
[0m[38;5;40mI/cat ( 609): <6>[ 99.694274] PVR_K: live segment count 159
[0m[38;5;40mI/cat ( 609): <6>[ 99.694335] PVR_K: free segment count 4294967295
[0m[38;5;40mI/cat ( 609): <6>[ 99.694396] PVR_K: free resource count 0 (0x0)
[0m[38;5;40mI/cat ( 609): <6>[ 99.694519] PVR_K: total allocs 159
[0m[38;5;40mI/cat ( 609): <6>[ 99.694580] PVR_K: total failed allocs 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694702] PVR_K: total frees 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694763] PVR_K: import count 0
[0m[38;5;40mI/cat ( 609): <6>[ 99.694824] PVR_K: export count 0
I have no glue how to fix this error
Maybe other devs jumped in. We should wait a little bit until CM stabilizes. Currently there are so much code changes ongoing, it makes no sense to release a version.
Click to expand...
Click to collapse
Hi quallenauge!
I work on Kitkat for our old Gen8. I have trouble with wifi too. Driver is loaded but no firmware.
But for your driver i have ported the V1.8 version (from my pvrversion.h in driver/gpu/pvr/):
Code:
#define PVRVERSION_FAMILY "sgxddk"
#define PVRVERSION_BRANCHNAME "1.8"
#define PVRVERSION_BUILD 789263
#define PVRVERSION_BSCONTROL "blaze_android_sgx_ogles1_ogles2_GPL"
#define PVRVERSION_STRING "blaze_android_sgx_ogles1_ogles2_GPL sgxddk 18 [email protected]" PVR_STR2(PVRVERSION_BUILD)
#define PVRVERSION_STRING_SHORT "[email protected]" PVR_STR2(PVRVERSION_BUILD)
I think/believe that it's compatible with PVR540, i have no problem with it
And used same GPU/Graphics configuration in boardconfig.mk than Quarkx for Defy.
Bizcuite
bizcuite said:
Hi quallenauge!
I work on Kitkat for our old Gen8. I have trouble with wifi too. Driver is loaded but no firmware.
But for your driver i have ported the V1.8 version (from my pvrversion.h in driver/gpu/pvr/):
Code:
#define PVRVERSION_FAMILY "sgxddk"
#define PVRVERSION_BRANCHNAME "1.8"
#define PVRVERSION_BUILD 789263
#define PVRVERSION_BSCONTROL "blaze_android_sgx_ogles1_ogles2_GPL"
#define PVRVERSION_STRING "blaze_android_sgx_ogles1_ogles2_GPL sgxddk 18 [email protected]" PVR_STR2(PVRVERSION_BUILD)
#define PVRVERSION_STRING_SHORT "[email protected]" PVR_STR2(PVRVERSION_BUILD)
I think/believe that it's compatible with PVR540, i have no problem with it
And used same GPU/Graphics configuration in boardconfig.mk than Quarkx for Defy.
Bizcuite
Click to expand...
Click to collapse
Congratulation for your Kitkat effor on Archos G8! I really was surprised when I read your thread (today). :good::good:
Which WLAN driver you are using? I'm using the current one from ol_R5.SP5.01 (which is included in the CM-11.0 repo).
Does the G8 also using the wl127xx ? What is failing?
For the graphics, I'm using the GFX version [email protected] which is also included in other repos such as the KFire repo from @Hashcode . Hm, maybe I should use an older one (the current from prop. common). I will check that out soon.
With no problems, do you mean the easter egg is playing correctly?
Cheers =)
Quallenauge said:
Congratulation for your Kitkat effor on Archos G8! I really was surprised when I read your thread (today). :good::good:
Which WLAN driver you are using? I'm using the current one from ol_R5.SP5.01 (which is included in the CM-11.0 repo).
Does the G8 also using the wl127xx ? What is failing?
For the graphics, I'm using the GFX version [email protected] which is also included in other repos such as the KFire repo from @Hashcode . Hm, maybe I should use an older one (the current from prop. common). I will check that out soon.
With no problems, do you mean the easter egg is playing correctly?
Cheers =)
Click to expand...
Click to collapse
Hi Quallenauge,
Sorry no times to answer.
I didn't know which problem exactly you had like pb with GPU driver. I thunk that you had this logcat at start.
I don't know if i can play correctly any video/others. I have just the launcher ATM (no internal/ext SD, no OMX codecs configured, no sound).
For wifi i use kernel's archos drivers or CM11 drivers.
The driver is loaded, but the logcat says me that it cannot configure the int wlan0, because it doesn't exist.
I think that is a problem of configuration before the compilation.
I must see how work exactly the wifi and work on it, but no times.
Have you progress about your pb of wifi? Have you got a logcat to share about this to see if the problem is same?
Bizcuite
Hi, I am having issues with a Huawei modem E173u-1 on my tablet Archos 101 g9 8gb
driver not found.
Can you help me, pls?
USB_ModeSwitch log from Wed Apr 09 17:50:44 PKT 2014
Raw args from udev: 1-1/1-1:1.0
Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer HUAWEI
product HUAWEI Mobile
serial
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/12d1.14fe
! matched. Reading config data
devList 1:
config: TargetVendor set to 12d1
config: TargetProduct set to 1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 12d1 -p 14fe -f $cB
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= 0x1506
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Could not reset endpoint (probably harmless): -34
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (4 sec.) ...
Waiting for device file system (5 sec.) ...
Waiting for device file system (6 sec.) ...
Waiting for device file system (7 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 12d1:1506 (HUAWEI: HUAWEI Mobile)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /sbin/insmod
Trying to find and install main driver module "option"
Trying to find module "option"
Loading support module /lib/modules/usb_wwan.ko
Error: insmod: cannot insert '/lib/modules/usb_wwan.ko': Invalid module format (-1): Exec
format error
Loading main driver module "option"
Error: insmod: cannot insert '/lib/modules/option.ko': Invalid module format (-1): Exec
format error
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding seems to have failed
All done, exiting
please answer!!!
i'm solved the problem by replacing the nucleus